Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1993-1998 Toyota T100 Base 1996-1997 Toyota T100 DLX 1994-1995 Toyota T100 DX 1993 Toyota T100 One-Ton 1995 Toyota T100 One-Ton DLX 1993-1998 Toyota T100 SR5

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulate d Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1984-1988 Toyota 4Runner DLX 1984-1988 Toyota 4Runner SR5

Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2007 Scion tC Base 2007 Scion tC Spec

For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2000-2005 Toyota Celica GT 2000-2005 Toyota Celica GTS

For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1978-1985 Toyota Celica GT 1983-1985 Toyota Celica GTS 1978-1985 Toyota Celica ST 1979-1985 Toyota Celica Supra 1970-1974,1980-1983 Toyota Corolla Base 1977-1979 Toyota Corolla Custom 1975-1983 Toyota Corolla DLX 1984-1986 Toyota Corolla Sport DLX 1985-1986 Toyota Corolla Sport GTS 1984-1986 Toyota Corolla Sport SR5 1975-1983 Toyota Corolla SR5 1978-1980 Toyota Cressida Base 1981-1988 Toyota Cressida Luxury 1986 Toyota Supra Base

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle's sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex(TM) polyurethane that lasts much longer than O.E.M. rubber bushings.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1990-1996 Nissan 300ZX 2+2 1990-1996 Nissan 300ZX Base 1990-1996 Nissan 300ZX Turbo

For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1979,1982-1983 Nissan 280ZX 2+2 1980-1981 Nissan 280ZX 2+2 GL 1982-1983 Nissan 280ZX 2+2 Turbo 1979-1983 Nissan 280ZX Base 1980-1981 Nissan 280ZX GL 1981 Nissan 280ZX GL Turbo 1982-1983 Nissan 280ZX Turbo 1968-1973 Nissan 510 Base 1973-1976 Nissan 610 Base 1977-1980 Nissan 810 Base

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003,2005 Dodge Ram 2500 Laramie 2003-2005 Dodge Ram 2500 SLT 2003-2005 Dodge Ram 2500 ST 2003-2005 Dodge Ram 3500 Laramie 2003-2005 Dodge Ram 3500 SLT 2003-2005 Dodge Ram 3500 ST

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle's sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex(TM) polyurethane that lasts much longer than O.E.M. rubber bushings.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1999-2003 Ford F-150 Lightning 2004 Ford F-150 Heritage SVT Lightning

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle's sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex(TM) polyurethane that lasts much longer than O.E.M. rubber bushings.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2000-2004 Ford Focus LX 2000-2004 Ford Focus SE 2000 Ford Focus Sony Limited Edition 2002-2004 Ford Focus SVT 2000-2004 Ford Focus ZTS 2002-2004 Ford Focus ZTW 2000-2004 Ford Focus ZX3 2002-2004 Ford Focus ZX5

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle's sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex(TM) polyurethane that lasts much longer than O.E.M. rubber bushings.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1988 Chevrolet Corvette 35th Anniversary Edition 1993 Chevrolet Corvette 40th Anniversary Edition 1988-1996 Chevrolet Corvette Base 1996 Chevrolet Corvette Collector's Edition 1996 Chevrolet Corvette Grand Sport 1995 Chevrolet Corvette Indianapolis 500 Pace Car 1990-1995 Chevrolet Corvette ZR-1

Energy's Hyper-Flex(TM) is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road and street performance driving, Hyper-Flex(TM) components do not wear or deteriorate from exposure to undercar chemicals such as oils and coolants and withstand atmospheric conditions like UV exposure and pollutants. Impervious to these elements, Energy's Hyper-Flex(TM) components are a great value. Not only will it outlast rubber 5 to 1 but are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex(TM) components are proudly Made in America and are available in red or black.Product Specifications SheetThis Part Fits: Year Make Model Submodel 1988 Chevrolet Corvette 35th Anniversary Edition 1993 Chevrolet Corvette 40th Anniversary Edition 1984-1995 Chevrolet Corvette Base 1986,1995 Chevrolet Corvette Indianapolis 500 Pace Car 1990-1995 Chevrolet Corvette ZR-1

Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy's proprietary Hyper-Flex(TM) material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.This Part Fits: Year Make Model Submodel 2007-2014 Cadillac Escalade Base 2009-2013 Cadillac Escalade Hybrid 2010-2013 Cadillac Escalade Hybrid Platinum 2011-2014 Cadillac Escalade Luxury 2008-2014 Cadillac Escalade Platinum 2011-2014 Cadillac Escalade Premium 2007-2014 Cadillac Escalade ESV Base 2011-2014 Cadillac Escalade ESV Luxury 2008-2014 Cadillac Escalade ESV Platinum 2011-2014 Cadillac Escalade ESV Premium 2007-2013 Cadillac Escalade EXT Base 2011-2013 Cadillac Escalade EXT Luxury 2011-2013 Cadillac Escalade EXT Premium 2013 Chevrolet Avalanche Black Diamond LS 2013 Chevrolet Avalanche Black Diamond LT 2013 Chevrolet Avalanche Black Diamond LTZ 2007-2012 Chevrolet Avalanche LS 2007-2012 Chevrolet Avalanche LT 2007-2012 Chevrolet Avalanche LTZ 2014 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013 Chevrolet Silverado 1500 LS 2007-2014 Chevrolet Silverado 1500 LT 2007-2014 Chevrolet Silverado 1500 LTZ 2007-2014 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2007-2014 Chevrolet Suburban 1500 LS 2007-2014 Chevrolet Suburban 1500 LT 2007-2014 Chevrolet Suburban 1500 LTZ 2007-2013 Chevrolet Suburban 2500 LS 2007-2013 Chevrolet Suburban 2500 LT 2007 Chevrolet Suburban 2500 LTZ 2008-2013 Chevrolet Tahoe Hybrid 2007-2014 Chevrolet Tahoe LS 2007-2014 Chevrolet Tahoe LT 2007-2014 Chevrolet Tahoe LTZ 2007-2014 Chevrolet Tahoe PPV 2012-2014 Chevrolet Tahoe SSV 2014 GMC Sierra 1500 Base 2007-2014 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2014 GMC Sierra 1500 SLE 2007-2014 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2009-2010 GMC Sierra 2500 HD SLE 2009-2010 GMC Sierra 2500 HD SLT 2009-2010 GMC Sierra 2500 HD WT 2009-2010 GMC Sierra 3500 HD SLE 2009-2010 GMC Sierra 3500 HD SLT 2009-2010 GMC Sierra 3500 HD WT 2004-2014 GMC Yukon Denali 2010-2013 GMC Yukon Denali Hybrid 2008-2013 GMC Yukon Hybrid 2006 GMC Yukon SL 2004-2014 GMC Yukon SLE 2004-2014 GMC Yukon SLT 2007-2014 GMC Yukon XL 1500 Denali 2007-2014 GMC Yukon XL 1500 SLE 2007-2014 GMC Yukon XL 1500 SLT 2007-2013 GMC Yukon XL 2500 SLE 2007-2013 GMC Yukon XL 2500 SLT

For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006-2009 Subaru Legacy 2.5i 2007-2009 Subaru Legacy 2.5i Limited 2007-2009 Subaru Legacy 2.5i Special Edition 2009 Subaru Legacy 3.0 R 2008-2009 Subaru Legacy 3.0 R Limited 2005-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005 Subaru Legacy i 2005 Subaru Legacy Limited 2006-2009 Subaru Outback 2.5i 2007 Subaru Outback 2.5i Basic 2008 Subaru Outback 2.5i L.L. Bean Edition 2006-2009 Subaru Outback 2.5i Limited 2008 Subaru Outback 2.5i Limited L.L. Bean Edition 2009 Subaru Outback 2.5i Special Edition 2009 Subaru Outback 3.0 R Limited 2008 Subaru Outback Base 2005 Subaru Outback i 2005 Subaru Outback Limited 2005-2006 Subaru Outback R 2005-2008 Subaru Outback R L.L. Bean Edition 2006 Subaru Outback R VDC Limited 2005 Subaru Outback VDC Limited 2005-2006 Subaru Outback XT 2005-2009 Subaru Outback XT Limited

For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1966-1975 BMW 2002 Base 1971-1974 BMW 2002 Cabriolet 1973-1974 BMW 2002 Turbo 1968-1971 BMW 2002ti Base 1971-1974 BMW 2002tii Base

Energy Suspension RZR FOOTWELL DRAIN PLUG

Energy Suspension's proprietary Hyper-Flex polyurethane cush drive bushings outlast and outperform soft OEM rubber.They provide smoother shifting through the gears and reduction in wear on other components.Ideal for machines with increased horsepower.

Energy Suspension 00-06 Honda CBR Polyurethane Cush Drive Bushing - Red

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 in. OD steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 in. rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles. Kit includes damper. Will not work with Factory Rubicon Wheels. Not recommended for vehicles with over 4 in. of lift. Not compatible with smaller OEM steel wheels or wheels with deep backspacing. Not recommended for vehicles with under 2 in. of suspension lift.Installation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 1984-1993 Jeep Cherokee Base 1991-1992 Jeep Cherokee Briarwood 1985-1988 Jeep Cherokee Chief 1996,1998-2001 Jeep Cherokee Classic 1993-1997 Jeep Cherokee Country 1985-1992 Jeep Cherokee Laredo 1987-1992,1998-2001 Jeep Cherokee Limited 1985-1990 Jeep Cherokee Pioneer 1994-2001 Jeep Cherokee SE 1989-2001 Jeep Cherokee Sport 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Wrangler 65th Anniversary Edition 2003-2006 Jeep Wrangler Rubicon 1997-2004 Jeep Wrangler Sahara 1997-2006 Jeep Wrangler SE 1997-2006 Jeep Wrangler Sport 2004-2006 Jeep Wrangler Unlimited 2005-2006 Jeep Wrangler Unlimited Rubicon 2002-2006 Jeep Wrangler X

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Suspension bushings are the link between your vehicle and it?s springs, struts and shock absorbers. Suspension bushings provide the movement and/ or mounting points in your vehicle?s suspension system.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2010-2012 Chevrolet Camaro LS 2010-2012 Chevrolet Camaro LT 2010-2012 Chevrolet Camaro SS 2012 Chevrolet Camaro ZL1 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2014-2017 Chevrolet SS Base 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1 2014-2017 Chevrolet SS Base 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP