aFe Control is proud to release the PFADT Series, Fabricated Tie Rod & Trailing Arm Package for the 2010-2014 Camaro. By using the latest FEA analysis software, our engineers were able to increase strength by up to 136% while simultaneously reducing mass 17%. This decrease in mass allows the suspension to react quicker to changing road surfaces and keeping the tire in contact with the road, increasing traction. This design also achieved a 99.8% reduction in deflection on the tie rods, and 32% on the trailing arms, resulting in decreased wheel hop, increasing traction even further. Both pieces are made in the USA and feature laser cut, 14 gauge 304 Stainless Steel plate, TIG welded in a I-Beam configuration for added strength and rigidity. The kit includes, lightweight, hard anodized 6061 T6 aluminum sleeves, specially grooved, graphite impregnated bushings and zerk fittings for a quiet, comfortable ride suitable for street or track use. Designed as a direct fit application with no vehicle modifications necessary, bolt a set on today and regain traction and confidence in your Camaro.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

aFe CONTROL Electronic Shock Delete Modules are a simple plug and play module that eliminate the suspension control check engine light allowing installation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. When paired with the aFe CONTROL Ride Height Simulator Modules, you can confidently run lowering or lift kits without disturbing the suspension control system. Together, these modules let you upgrade your suspension without triggering error codes or limiting vehicle performance. Our aFe CONTROL Electronic Shock Delete Modules and Ride Height Simulators are both required when replacing your MagneRide electronic shock absorbers. Not using these two products together will set off the suspension control error light.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V 2005-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 2006-2013 Chevrolet Corvette Z06 2009-2013 Chevrolet Corvette ZR1

aFe Control is proud to release the PFADT Series, Fabricated Toe Rods for the 2010-2014 Camaro. By using the latest FEA analysis software, our engineers were able to increase strength by 136% while simultaneously reducing mass. This decrease in mass allows the suspension to react quicker to changing road surfaces and keeping the tire in contact with the road, increasing traction. This design also achieved a 99.8% reduction in deflection, resulting in decreased wheel hop, increasing traction even further. The toe rods are made in the USA and feature laser cut, 14 gauge 304 Stainless Steel plate, TIG welded in a I-Beam configuration for added strength and rigidity. The kit includes, lightweight, hard anodized 6061 T6 aluminum sleeves, specially grooved, graphite impregnated bushings and zerk fittings for a quiet, comfortable r ide suitable for street or track use. Designed as a direct fit application with no vehicle modifications necessary, bolt a set on today and regain traction and confidence in your Camaro.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber c hange is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to e liminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon 2009-2013 Chevrolet Corvette ZR1

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber c hange is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to e liminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon 2009-2013 Chevrolet Corvette ZR1

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber c hange is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to e liminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 1997-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 1998 Chevrolet Corvette Indianapolis 500 Pace Car 2001-2004,2006-2013 Chevrolet Corvette Z06 2009-2013 Chevrolet Corvette ZR1

Rock Krawler 1in 1-1/4in & 1-3/8in Large Krawler Joint Rebuid Kit

Transform your Gen3 F-150 Raptor’s performance and stance with the ICON Vehicle Dynamics Stage 1 suspension system, engineered specifically for vehicles equipped with OE shock absorbers. The front coil springs utilize a linear spring rate for consistent performance and precise handling while delivering 2.25" of front lift for standard Raptors and 2" for Raptor R models, ensuring an aggressive look and increased ground clearance. Designed for seamless compatibility, they maintain full electronic shock functionality while enhancing your truck's capability and ride quality.This Part Fits: Year Make Model Submodel 2021-2024 Ford F-150 Raptor

aFe CONTROL Electronic Shock Delete Modules are a simple plug and play module that eliminate the suspension control check engine light allowing installation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. When paired with the aFe CONTROL Ride Height Simulator Modules, you can confidently run lowering or lift kits without disturbing the suspension control system. Together, these modules let you upgrade your suspension without triggering error codes or limiting vehicle performance. Our aFe CONTROL Electronic Shock Delete Modules and Ride Height Simulators are both required when replacing your MagneRide electronic shock absorbers. Not using these two products together will set off the suspension control error light.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2019 Cadillac ATS Base 2013-2019 Cadillac ATS Luxury 2013-2016 Cadillac ATS Performance 2013-2016 Cadillac ATS Premium 2017-2019 Cadillac ATS Premium Luxury 2017-2019 Cadillac ATS Premium Performance 2016-2019 Cadillac ATS V 2014-2019 Cadillac CTS Base 2014-2019 Cadillac CTS Luxury 2014-2016 Cadillac CTS Performance 2014-2016 Cadillac CTS Premium 2017-2019 Cadillac CTS Premium Luxury 2014-2019 Cadillac CTS Vsport 2014-2016 Cadillac CTS Vsport Premium 2017-2019 Cadillac CTS Vsport Premium Luxury 2015-2020,2026 Cadillac Escalade Base 2015-2026 Cadillac Escalade Luxury 2015-2020 Cadillac Escalade Platinum 2026 Cadillac Escalade Platinum Luxury 2026 Cadillac Escalade Platinum Sport 2015-2016 Cadillac Escalade Premium 2017-2025 Cadillac Escalade Premium Luxury 2021-2025 Cadillac Escalade Premium Luxury Platinum 2021-2026 Cadillac Escalade Sport 2021-2025 Cadillac Escalade Sport Platinum 2023-2026 Cadillac Escalade V 2015-2020,2026 Cadillac Escalade ESV Base 2015-2026 Cadillac Escalade ESV Luxury 2015-2020 Cadillac Escalade ESV Platinum 2026 Cadillac Escalade ESV Platinum Luxury 2026 Cadillac Escalade ESV Platinum Sport 2015-2016 Cadillac Escalade ESV Premium 2017-2025 Cadillac Escalade ESV Premium Luxury 2021-2025 Cadillac Escalade ESV Premium Luxury Platinum 2021-2026 Cadillac Escalade ESV Sport 2021-2025 Cadillac Escalade ESV Sport Platinum 2023-2026 Cadillac Escalade ESV V 2010-2015,2017-2023 Chevrolet Camaro LS 2010-2024 Chevrolet Camaro LT 2010-2024 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015,2017-2024 Chevrolet Camaro ZL1 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1 2015-2017 Chevrolet SS Base 2021-2026 Chevrolet Suburban High Country 2015-2019 Chevrolet Suburban LS 2015-2019 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017-2020,2022-2026 Chevrolet Suburban Premier 2022-2026 Chevrolet Suburban RST 2022-2026 Chevrolet Suburban Z71 2022-2026 Chevrolet Tahoe Commercial 2021-2026 Chevrolet Tahoe High Country 2015-2026 Chevrolet Tahoe LS 2015-2026 Chevrolet Tahoe LT 2015-2016 Chevrolet Tahoe LTZ 2015-2026 Chevrolet Tahoe PPV 2017-2026 Chevrolet Tahoe Premier 2021-2026 Chevrolet Tahoe RST 2015-2026 Chevrolet Tahoe SSV 2021-2026 Chevrolet Tahoe Z71 2015-2018 GMC Sierra 1500 Base 2015-2018 GMC Sierra 1500 Denali 2015-2018 GMC Sierra 1500 SLE 2015-2018 GMC Sierra 1500 SLT 2021-2026 GMC Yukon AT4 2025-2026 GMC Yukon AT4 Ultimate 2015-2026 GMC Yukon Denali 2023-2026 GMC Yukon Denali Ultimate 2025-2026 GMC Yukon Elevation 2015-2024 GMC Yukon SLE 2015-2024 GMC Yukon SLT 2021-2026 GMC Yukon XL AT4 2025-2026 GMC Yukon XL AT4 Ultimate 2015-2026 GMC Yukon XL Denali 2023-2026 GMC Yukon XL Denali Ultimate 2025-2026 GMC Yukon XL Elevation 2015-2024 GMC Yukon XL SLE 2015-2024 GMC Yukon XL SLT

aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work in tandem with our Electronic Shock Delete kit 436-401001-N. These Modules are sold as a set of four.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 1997-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 1998 Chevrolet Corvette Indianapolis 500 Pace Car 2001-2004,2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon 2009-2013 Chevrolet Corvette ZR1

ICON Vehicle Dynamics 2021-2024 Ford F-150 4WD suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. To achieve this, these systems include high-strength CNC machined ductile iron steering knuckles that replicate the suspension geometry of the F-150 Tremor and are effectively a Tremor “conversion” for your F-150 4WD. This Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable for 3.5-4.5” of front lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. Their combination with the ICON steering knuckles also allows for a 20% increase in wheel travel compared to other ICON F-150 coilover kits. Tubular Delta Joint Pro upper control arms on the F-150 not only add strength and durability, but help retain factory alignment spec range, increasing caster over stock and allow for the extra lift height this system provides. ICON 2.5 Aluminum Series piggyback reservoir rear shocks utilize a vehicle-specific valving and offer increased damping and head dissipation, balancing the performance of the truck from front to rear. The ICON Vehicle Dynamics 2021-2024 F-150 4WD Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2024 Ford F-150 Lariat 2021-2023 Ford F-150 Platinum 2021-2024 Ford F-150 Police Responder 2021-2024 Ford F-150 SSV 2024 Ford F-150 STX 2021-2024 Ford F-150 Tremor 2021-2024 Ford F-150 XL 2021-2024 Ford F-150 XLT

Eibach 24-25 Lexus GX550 Premium Pro-Truck Lift Kit - Stage 2

For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustment. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST XA Coilover kits deliver precise adjustment to your ride height and look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2018-2023 BMW 530e Base 2017-2023 BMW 530i Base 2017-2023 BMW 540i Base

H&R 23-25 Tesla Model 3 Highland Long Range RWD VTF Adjustable Lowering Springs w/ Adapt. Suspension

BMR 68-72 A-Body Level 2 Handling Performance Package w/ Bilstein Shocks

ST Sport Shocks are the perfect upgrade for old or tired dampers, providing improved driving dynamics thanks to a shortened rebound construction. ST Sport Shocks can be used with a wide range of sport springs from every manufacturer. Further improve your vehicle's driving dynamics with the ST sport shock - an OEM replacement that will transform the way your car feels and handles!;ST sport shocks are manufactured with heat-resistant twin-tube dampers with fixed damping characteristics. Their low friction and pressure resistant housing features a high-quality mono block guide and seal package for maximum longevity in ALL weather conditions. The shortened chrome-plated piston rod makes the sport shock perfectly suited for lowered vehicles.;The use of high-quality components ensures each ST sport shock performs at its best for the maximum period of time. The use of a shortened piston rod ensures a sufficient pre-load of the lowering spring under hard driving conditions. With their fixed damper characteristics, the ST sport shocks ensure a greater driving experience for numerous cars.This Part Fits: Year Make Model Submodel 2015-2016 Audi A3 TDI Premium 2015-2016 Audi A3 TDI Premium Plus 2015-2016 Audi A3 TDI Prestige 2015 Volkswagen Golf TDI S 2015 Volkswagen Golf TDI SE 2015 Volkswagen Golf TDI SEL 2015 Volkswagen Golf SportWagen TDI S 2015 Volkswagen Golf SportWagen TDI SE 2015 Volkswagen Golf SportWagen TDI SEL

Firestone's original helper spring kit is designed to level loads when you are hauling or towing to eliminate squat and return the vehicle designed ride height. Paired with a single path analog compressor kit and no drill mounting plate. A true All In One kit with everything you need in one box for a quick and easy install.This Part Fits: Year Make Model Submodel 2011-2016 Ford F-250 Super Duty King Ranch 2011-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2011-2016 Ford F-250 Super Duty XL 2011-2016 Ford F-250 Super Duty XLT 2011-2016 Ford F-350 Super Duty King Ranch 2011-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2011-2016 Ford F-350 Super Duty XL 2011-2016 Ford F-350 Super Duty XLT

Ridetech 55-57 Chevy (Two Piece Frame) Air Suspension System

Ridetech 55-57 Chevy (One Piece Frame) Air Suspension System

The ICON 2.5” suspension system is a great way to lift your 4WD 2017-2019 Ford F-250/F-350 Super Duty while improving ride quality and performance. This upgraded Stage 2 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. ICON's Stage 2 System is comprised of dual rate coil springs, 2.5 Aluminum Series piggyback reservoir front and rear shocks, alignment cams for adding caster, and rear leaf spring expansion packs with blocks and U-bolts for a more compliant ride and reduced axle wrap. ICON 2.5" piggyback reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.This Part Fits: Year Make Model Submodel 2017-2019 Ford F-250 Super Duty King Ranch 2017-2019 Ford F-250 Super Duty Lariat 2018-2019 Ford F-250 Super Duty Limited 2017-2019 Ford F-250 Super Duty Platinum 2017-2019 Ford F-250 Super Duty XL 2017-2019 Ford F-250 Super Duty XLT 2017-2019 Ford F-350 Super Duty King Ranch 2017-2019 Ford F-350 Super Duty Lariat 2018-2019 Ford F-350 Super Duty Limited 2017-2019 Ford F-350 Super Duty Platinum 2017-2019 Ford F-350 Super Duty XL 2017-2019 Ford F-350 Super Duty XLT

Our Camburg KINETIK Series billet upper control arms for the Ford Ranger Raptor allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7/8" chromoly heim joints, which also eliminate flexing/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024-2025 Ford Ranger Raptor

Bilstein B4 OE Replacement (Air) dampers are designed to replace the original air suspension systems on many European brand vehicles. Bilstein is an OE supplier for air suspension systems; the quality of these products meets, and typically exceeds, the standards set forth by the vehicle's manufacturer. Bilstein B4 OE Replacement (Air) dampers are designed to connect directly into the original connectors on the vehicle, ensuring modification-free installation and restoration of the original feel of the vehicle.Installation InstructionsInstallation InstructionsWarrantyMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2011-2014,2016-2018 Porsche Cayenne Base 2013-2016 Porsche Cayenne Diesel 2014 Porsche Cayenne Diesel Platinum Edition 2013-2018 Porsche Cayenne GTS 2014,2017-2018 Porsche Cayenne Platinum Edition 2011-2018 Porsche Cayenne S 2015-2018 Porsche Cayenne S E-Hybrid 2017-2018 Porsche Cayenne S E-Hybrid Platinum Edition 2011-2014 Porsche Cayenne S Hybrid 2011-2018 Porsche Cayenne Turbo 2013-2014,2016-2018 Porsche Cayenne Turbo S

Zone Offroad 14-24 Ram 2500 / 13-22 Ram 3500 Dual Steering Stablilizer Mounting Kit

The ST X Coilover suspension was developed for the everyday driver who needs to hug the curves yet retain road comfort. Simple, uncomplicated road performance for those who just want to get in and drive. Add in our wide range of height adjustability; the ST X Coilover will look as perfect as it feels. ST XCoilover kits deliver precise adjustment to your ride height and look of your car. We manufacture an adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing. At ST suspensions we do not accept compromises. As a matter of principle we rely on world class engineering delivered from KW for all our dampers. Why? To simply improve your driving experience! All ST X Coilover kits are application specific for your car and perfectly adapted for everyday life.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28

H&R 23-25 Tesla Model 3 Highland Long Range AWD VTF Adjustable Lowering Springs w/ Adapt. Suspension

Bilstein B1 (Components) Replacement Ball Joint Kits are direct replacements for ball joints originally installed in Bilstein B8 Control Arms. These Replacement Ball Joint Kits include all necessary hardware and will help you get back on the road or trail quickly.

Solve your work trucks steering shimmy with Superlift’s new dual steering stabilizer for the 2017-2024 Ford F-450 and F-550 4WD. The Ford Super Duty is known for bump steer or “steering wheel kick”, so Superlift partnered with Fox Racing to create the best stabilizer system to rid your truck of those issues. This stabilizer setup allows you to install 2 more steering stabilizers to your F-450 or F-550 Super Duty without any lift height. This system can be used in conjunction with the OEM stabilizer for the maximum amount of dampening possible.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2002 Suzuki Esteem GL 1996-2002 Suzuki Esteem GLX 1996-2002 Suzuki Esteem GLX Plus 2003 Suzuki Grand Vitara Base 2000-2002 Suzuki Grand Vitara JLS 2000-2001 Suzuki Grand Vitara JLS Plus 2001 Suzuki Grand Vitara JLS Plus SE 1999-2002 Suzuki Grand Vitara JLX 1999-2001 Suzuki Grand Vitara JLX Plus 2001 Suzuki Grand Vitara JLX Plus SE 1999 Suzuki Grand Vitara JS 1999 Suzuki Grand Vitara JS Plus 2000-2002 Suzuki Grand Vitara Limited 2001 Suzuki Grand Vitara XL-7 2001 Suzuki Grand Vitara XL-7 Limited 2001 Suzuki Grand Vitara XL-7 Plus 2001 Suzuki Grand Vitara XL-7 Touring 1989 Suzuki Samurai Base 1986-1988 Suzuki Samurai JA 1986-1988 Suzuki Samurai JX 1986-1987 Suzuki Samurai JX SE

Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.

ISC Suspension Titanium Valve Stem Caps (Set of 4) - Gold

ISC Suspension 82-94 BMW 3 Series (Excl AWD) w/51.1mm Front Strut Track/Race N1 Coilover Kit

Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.

Pedders 15-18 Ford Mustang S550 (w/o Magneride Only) SportsRyder Suspension KitThis Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2022 Ford Mustang EcoBoost 2015-2022 Ford Mustang EcoBoost Premium 2015-2022 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2022 Ford Mustang GT Premium 2021-2022 Ford Mustang Mach 1 2015-2017 Ford Mustang V6

Synergy 2000-2002 Dodge Ram Heavy Duty Steering Kit

Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.Installation InstructionsWarrantyMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2008-2013 Toyota Highlander Base 2008-2013 Toyota Highlander Limited 2013 Toyota Highlander Plus 2010-2013 Toyota Highlander SE 2008-2010 Toyota Highlander Sport

Pedders 04-06 Pontiac GTO Drag Race Strut and Spring Suspension Kit

These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek blue finish with our Camburg logo. The larger FK 1.25" uniball with a PTFE liner provides increased strength and mis-alignment for maximum wheel travel. The arms are made in the USA and are superior to cheaper imports. Model specific spacers machined from heat-treated stainless steel adapt the uniball to the spindle/knuckle without drilling or modifications. The 1.25" uniball allows for a larger bolt with a low profile press-on cap to resist the elements. The use of FK 7/8" chromoly heim joints allows for additional camber and caster adjustment while eliminating flexing/deflection and binding. AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut, ensures secure heim joint performance in off-road conditions. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for installation. These arms are designed for 1-3" of lift.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024-2025 Lexus GX550 Luxury 2024-2025 Lexus GX550 Luxury+ 2024-2025 Lexus GX550 Overtrail 2024-2025 Lexus GX550 Overtrail+ 2024-2025 Lexus GX550 Premium 2024-2025 Lexus GX550 Premium+ 2022-2024 Lexus LX600 Base 2022 Lexus LX600 F Sport 2023-2025 Lexus LX600 F Sport Handling 2022-2025 Lexus LX600 Luxury 2022-2025 Lexus LX600 Premium 2022-2024 Lexus LX600 Ultra Luxury 2025 Toyota 4Runner Limited 2025 Toyota 4Runner Platinum 2025 Toyota 4Runner SR5 2025 Toyota 4Runner Trailhunter 2025 Toyota 4Runner TRD Off-Road 2025 Toyota 4Runner TRD Off-Road Premium 2025 Toyota 4Runner TRD Pro 2025 Toyota 4Runner TRD Sport 2025 Toyota 4Runner TRD Sport Premium 2024-2025 Toyota Land Cruiser 1958 2024-2025 Toyota Land Cruiser Base 2024 Toyota Land Cruiser First Edition 2024-2025 Toyota Tacoma Limited 2024-2025 Toyota Tacoma SR 2024-2025 Toyota Tacoma SR5 2024-2025 Toyota Tacoma Trailhunter 2024-2025 Toyota Tacoma TRD Off-Road 2024-2025 Toyota Tacoma TRD PreRunner 2024-2025 Toyota Tacoma TRD Pro 2024-2025 Toyota Tacoma TRD Sport