The 32120 set centers both Steer Axle wheels and brake drums to minimize wheel vibrations, brake pedal pulsations, and wheel hop. Simply slide the sleeves over the 22mm wheel studs and seat the face of the hub at the 12, 4, and 8 o'clock positions. Reinstall the cast brake drum and mount the aluminum wheel over the studs and onto the protuding diameter of the sleeve. Install lugnuts and torque in the proper sequence using the manufacturer's recommended torque specifications.Installation Instructions

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off-center" or clocked position. The 32115 is for Ford F450/550 Super Duty. These tools slide directly over thewheel studs in the 12, 4, and 8 o'clock positions. The wheel is then installed over the tools, the stud nuts are added to the exposed studs and tightened. The wheel is now centered precisely. The centering tools are then removed and the final stud nuts are added - torquing all nuts to mfg. specifications.Installation Instructions

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off center" or clocked position. The 32111 threadless wheel centering tool set (3) fits 22mm studs on Heavy Duty and Over-the-Road Tractors and trailers. These tools slide directly over the wheel studs in the 12, 4, and 8 o'clock positions. The wheel is then installed over teh tools, the stud nuts added to the exposed studs and tightened. The wheel is now centeredprecisely. The centering tools are removed and the final stud nuts are added - torquing all nuts to mfg. specifications.Installation Instructions

Using a shop press, the tool is designed for quick, easyremoval & installation of xAxis sealed flex joints with 40mmOD and up to 60mm wide; including part numbers 15623, 15625,15627, 15629, 15631, 15633, 15635, 15637, 15639, and 15643.

These adjustable bushings offer camber changes ±1.25° for the rear of Mercedes E Class (W211). Make the non-adjustable E Class adjustable for life by replacing the outer bushing on the upper control arms. Tight tolerances require that press adapter kit p/n 76000 is used for this kit. NOTE: Does not fit AMG models. Rear Adjustment Range: Camber ± 1.25° Installation Time: .6hr/side Required: One Kit per wheelInstallation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Mercedes-Benz E320 4Matic 2003-2005 Mercedes-Benz E320 Base 2007-2009 Mercedes-Benz E320 Bluetec 2005-2006 Mercedes-Benz E320 CDI 2006-2009 Mercedes-Benz E350 4Matic 2006-2009 Mercedes-Benz E350 Base 2004-2006 Mercedes-Benz E500 4Matic 2003-2006 Mercedes-Benz E500 Base 2007-2009 Mercedes-Benz E550 4Matic 2007-2009 Mercedes-Benz E550 Base

Change rear camber by installing these adjustable bushings for the rear of Mercedes E Class sedans and wagons. Make the non-adjustable rear camber adjustable for life by replacing the outer bushing on the upper control arms. Tight tolerances require that press adapter kit p/n 76000 is used for this kit.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2015 Mercedes-Benz C250 Base 2012-2014 Mercedes-Benz C250 Luxury 2012-2014 Mercedes-Benz C250 Sport 2013-2020 Mercedes-Benz C300 4Matic 2008-2014 Mercedes-Benz C300 4Matic Luxury 2008-2014 Mercedes-Benz C300 4Matic Sport 2015-2020 Mercedes-Benz C300 Base 2008-2011 Mercedes-Benz C300 Luxury 2008-2011 Mercedes-Benz C300 Sport 2012-2015 Mercedes-Benz C350 4Matic 2012-2015 Mercedes-Benz C350 Base 2008-2014 Mercedes-Benz C350 Sport 2016-2018 Mercedes-Benz C350e Base 2015 Mercedes-Benz C400 4Matic 2017-2018 Mercedes-Benz C43 AMG Base 2016 Mercedes-Benz C450 AMG 4Matic 2008-2018 Mercedes-Benz C63 AMG Base 2012 Mercedes-Benz C63 AMG Black Series 2015-2018 Mercedes-Benz C63 AMG S Base 2014-2016 Mercedes-Benz E250 Bluetec 2014-2016 Mercedes-Benz E250 Bluetec 4Matic 2010-2016 Mercedes-Benz E350 4Matic 2010-2016 Mercedes-Benz E350 Base 2011-2013 Mercedes-Benz E350 Bluetec 2015-2017 Mercedes-Benz E400 4Matic 2015-2017 Mercedes-Benz E400 Base 2013-2015 Mercedes-Benz E400 Hybrid 2010-2014 Mercedes-Benz E550 4Matic 2010-2011,2017 Mercedes-Benz E550 Base 2014-2015 Mercedes-Benz E63 AMG 4Matic 2010-2013 Mercedes-Benz E63 AMG Base 2014-2016 Mercedes-Benz E63 AMG S 4Matic

These adjustable bushings offer camber changes of ± 1.25° for the rear of many newer Mercedes platforms. Make these non-adjustable Mercedes adjustable for life by replacing the outer bushing on the upper control arms. Tight tolerances require that adapter kit p/n 76000 is used for this kit. NOTE: Does not fit AMG models. Rear Adjustment Range: Camber ± 1.25° Installation Time: .6hr/side Required: One Kit per wheelInstallation InstructionsThis Part Fits: Year Make Model Submodel 2012-2015 Mercedes-Benz C250 Base 2012-2014 Mercedes-Benz C250 Luxury 2012-2014 Mercedes-Benz C250 Sport 2013-2015 Mercedes-Benz C300 4Matic 2008-2014 Mercedes-Benz C300 4Matic Luxury 2008-2014 Mercedes-Benz C300 4Matic Sport 2015 Mercedes-Benz C300 Base 2008-2011 Mercedes-Benz C300 Luxury 2008-2011 Mercedes-Benz C300 Sport 2012-2015 Mercedes-Benz C350 4Matic 2012-2015 Mercedes-Benz C350 Base 2008-2014 Mercedes-Benz C350 Sport 2015 Mercedes-Benz C400 4Matic 2008-2015 Mercedes-Benz C63 AMG Base 2012 Mercedes-Benz C63 AMG Black Series 2015 Mercedes-Benz C63 AMG S Base 2014-2016 Mercedes-Benz E250 Bluetec 2014-2016 Mercedes-Benz E250 Bluetec 4Matic 2010-2015 Mercedes-Benz E350 4Matic 2010-2015 Mercedes-Benz E350 Base 2011-2013 Mercedes-Benz E350 Bluetec 2015-2017 Mercedes-Benz E400 4Matic 2015-2017 Mercedes-Benz E400 Base 2013-2015 Mercedes-Benz E400 Hybrid 2010-2014 Mercedes-Benz E550 4Matic 2010-2017 Mercedes-Benz E550 Base 2013-2015 Mercedes-Benz GLK250 Bluetec 4Matic 2010-2015 Mercedes-Benz GLK350 4Matic 2010-2015 Mercedes-Benz GLK350 Base

These adjustable bushings make rear camber change possible for many Mercedes vehicles. By replacing the outer bushing in the two rear upper control arms, you achieve up to ±1.25° of change. Stock bushings are easily removed using the Specialty Products #75990 bushing press adapters.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2007 Chrysler Crossfire Base 2005-2008 Chrysler Crossfire Limited 2005-2006 Chrysler Crossfire SRT-6 1986-1988,1991-1993 Mercedes-Benz 190E 2.3 1986-1987 Mercedes-Benz 190E 2.3-16 1987-1993 Mercedes-Benz 190E 2.6 1987-1989 Mercedes-Benz 260E Base 1990-1992 Mercedes-Benz 300E 2.6 1993 Mercedes-Benz 300E 2.8 1990-1993 Mercedes-Benz 300E 4Matic 1986-1993 Mercedes-Benz 300E Base 1992-1993 Mercedes-Benz 500E Base 1994-1996 Mercedes-Benz C220 Base 1997-1998 Mercedes-Benz C230 Base 1999-2000,2002-2005 Mercedes-Benz C230 Kompressor 2006-2007 Mercedes-Benz C230 Sport 2003-2005 Mercedes-Benz C240 4Matic 2001-2005 Mercedes-Benz C240 Base 2006-2007 Mercedes-Benz C280 4Matic 1994-2000 Mercedes-Benz C280 Base 2006-2007 Mercedes-Benz C280 Luxury 2002-2004 Mercedes-Benz C32 AMG Base 2003-2005 Mercedes-Benz C320 4Matic 2001-2005 Mercedes-Benz C320 Base 2006-2007 Mercedes-Benz C350 4Matic 2006-2007 Mercedes-Benz C350 Luxury 2006-2007 Mercedes-Benz C350 Sport 1995-1997 Mercedes-Benz C36 AMG Base 1998-2000 Mercedes-Benz C43 AMG Base 2005-2006 Mercedes-Benz C55 AMG Base 1998-2005 Mercedes-Benz CLK320 Base 2006-2009 Mercedes-Benz CLK350 Base 1999-2003 Mercedes-Benz CLK430 Base 2003-2006 Mercedes-Benz CLK500 Base 2001-2006 Mercedes-Benz CLK55 AMG Base 2007-2009 Mercedes-Benz CLK550 Base 2007-2008 Mercedes-Benz CLK63 AMG Base 2008 Mercedes-Benz CLK63 AMG Black Series 1995-1999 Mercedes-Benz E300 Base 1998-2002 Mercedes-Benz E320 4Matic 1994-2002 Mercedes-Benz E320 Base 1994-1995,1997 Mercedes-Benz E420 Base 2000-2002 Mercedes-Benz E430 4Matic 1998-2002 Mercedes-Benz E430 Base 1994 Mercedes-Benz E500 Base 1999-2002 Mercedes-Benz E55 AMG Base 1999-2002 Mercedes-Benz SL500 Base 1999-2002 Mercedes-Benz SL600 Base 1998-2004 Mercedes-Benz SLK230 Kompressor 2006-2008 Mercedes-Benz SLK280 Base 2009-2011 Mercedes-Benz SLK300 Base 2002-2004 Mercedes-Benz SLK32 AMG Base 2001-2004 Mercedes-Benz SLK320 Base 2005-2011 Mercedes-Benz SLK350 Base 2005-2010 Mercedes-Benz SLK55 AMG Base

Adjust camber or caster ±.3° using the factory offset in the lower control arm bushings of many Mercedes C Class, CLK, and SLK passenger vehicles with this cam kit. Place the offset bolt in the forward arm's bushing to change caster or in the rearward arm's bushing to change camber. If both camber and caster change are needed, you can use 2 kits. SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2007 Chrysler Crossfire Base 2005-2008 Chrysler Crossfire Limited 2005-2006 Chrysler Crossfire SRT-6 1994-1996 Mercedes-Benz C220 Base 1997-1998 Mercedes-Benz C230 Base 1999-2000 Mercedes-Benz C230 Kompressor 2012-2015 Mercedes-Benz C250 Base 2012-2014 Mercedes-Benz C250 Luxury 2012-2014 Mercedes-Benz C250 Sport 1994-2000 Mercedes-Benz C280 Base 2013-2015 Mercedes-Benz C300 4Matic 2008-2014 Mercedes-Benz C300 4Matic Luxury 2008-2014 Mercedes-Benz C300 4Matic Sport 2015 Mercedes-Benz C300 Base 2008-2011 Mercedes-Benz C300 Luxury 2008-2011 Mercedes-Benz C300 Sport 2012-2015 Mercedes-Benz C350 4Matic 2012-2015 Mercedes-Benz C350 Base 2008-2014 Mercedes-Benz C350 Sport 1995-1997 Mercedes-Benz C36 AMG Base 2015 Mercedes-Benz C400 4Matic 1998-2000 Mercedes-Benz C43 AMG Base 2008-2015 Mercedes-Benz C63 AMG Base 2012 Mercedes-Benz C63 AMG Black Series 2015 Mercedes-Benz C63 AMG S Base 2000-2006 Mercedes-Benz CL500 Base 2001-2006 Mercedes-Benz CL55 AMG Base 2001-2006 Mercedes-Benz CL600 Base 2005-2006 Mercedes-Benz CL65 AMG Base 1998-2003 Mercedes-Benz CLK320 Base 1999-2003 Mercedes-Benz CLK430 Base 2003 Mercedes-Benz CLK500 Base 2001-2003 Mercedes-Benz CLK55 AMG Base 2015-2017 Mercedes-Benz CLS400 4Matic 2015-2017 Mercedes-Benz CLS400 Base 2012-2018 Mercedes-Benz CLS550 4Matic 2012-2018 Mercedes-Benz CLS550 Base 2014 Mercedes-Benz CLS63 AMG 4Matic 2012-2013 Mercedes-Benz CLS63 AMG Base 2014-2018 Mercedes-Benz CLS63 AMG S 4Matic 2014-2016 Mercedes-Benz E250 Bluetec 2014-2016 Mercedes-Benz E250 Bluetec 4Matic 2003-2005 Mercedes-Benz E320 4Matic 2006-2016 Mercedes-Benz E350 4Matic 2006-2016 Mercedes-Benz E350 Base 2011-2013 Mercedes-Benz E350 Bluetec 2015-2016 Mercedes-Benz E400 4Matic 2015-2016 Mercedes-Benz E400 Base 2013-2015 Mercedes-Benz E400 Hybrid 2004-2006 Mercedes-Benz E500 4Matic 2007-2014 Mercedes-Benz E550 4Matic 2007-2011 Mercedes-Benz E550 Base 2014-2015 Mercedes-Benz E63 AMG 4Matic 2010-2013 Mercedes-Benz E63 AMG Base 2014-2016 Mercedes-Benz E63 AMG S 4Matic 2013-2015 Mercedes-Benz GLK250 Bluetec 4Matic 2010-2015 Mercedes-Benz GLK350 4Matic 2010-2015 Mercedes-Benz GLK350 Base 2003-2005 Mercedes-Benz S430 4Matic 2003-2005 Mercedes-Benz S430 Base 2003-2005 Mercedes-Benz S500 4Matic 1998-2004 Mercedes-Benz SLK230 Kompressor 2002-2004 Mercedes-Benz SLK32 AMG Base 2001-2004 Mercedes-Benz SLK320 Base

Adjust camber or caster ±.3° using the factory offset in the lower control arm bushings of many Mercedes C, E, and S Class passenger vehicles. Place the offset bolt in the forward arm's bushing to change caster or in the rearward arm's bushing to changecamber. If both camber and caster change are needed, you can use 2 kits. SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2005 Mercedes-Benz C230 Kompressor 2006-2007 Mercedes-Benz C230 Sport 2003-2005 Mercedes-Benz C240 4Matic 2001-2005 Mercedes-Benz C240 Base 2012-2014 Mercedes-Benz C250 Base 2012-2014 Mercedes-Benz C250 Luxury 2012-2014 Mercedes-Benz C250 Sport 2006-2007 Mercedes-Benz C280 4Matic 2006-2007 Mercedes-Benz C280 Luxury 2013-2014 Mercedes-Benz C300 4Matic 2008-2014 Mercedes-Benz C300 4Matic Luxury 2008-2014 Mercedes-Benz C300 4Matic Sport 2008-2011 Mercedes-Benz C300 Luxury 2008-2011 Mercedes-Benz C300 Sport 2002-2004 Mercedes-Benz C32 AMG Base 2003-2005 Mercedes-Benz C320 4Matic 2001-2005 Mercedes-Benz C320 Base 2006-2007,2012-2014 Mercedes-Benz C350 4Matic 2012-2014 Mercedes-Benz C350 Base 2006-2007 Mercedes-Benz C350 Luxury 2006-2014 Mercedes-Benz C350 Sport 2005-2006 Mercedes-Benz C55 AMG Base 2008-2014 Mercedes-Benz C63 AMG Base 2012 Mercedes-Benz C63 AMG Black Series 2009-2014 Mercedes-Benz CL550 4Matic 2007-2008 Mercedes-Benz CL550 Base 2007-2014 Mercedes-Benz CL600 Base 2008-2014 Mercedes-Benz CL63 AMG Base 2008-2014 Mercedes-Benz CL65 AMG Base 2003-2005 Mercedes-Benz CLK320 Base 2006-2009 Mercedes-Benz CLK350 Base 2003 Mercedes-Benz CLK430 Base 2003-2006 Mercedes-Benz CLK500 Base 2003-2006 Mercedes-Benz CLK55 AMG Base 2007-2009 Mercedes-Benz CLK550 Base 2007-2008 Mercedes-Benz CLK63 AMG Base 2008 Mercedes-Benz CLK63 AMG Black Series 2006 Mercedes-Benz CLS500 Base 2006 Mercedes-Benz CLS55 AMG Base 2012-2015 Mercedes-Benz CLS550 4Matic 2007-2015 Mercedes-Benz CLS550 Base 2014 Mercedes-Benz CLS63 AMG 4Matic 2007-2013 Mercedes-Benz CLS63 AMG Base 2014-2015 Mercedes-Benz CLS63 AMG S 4Matic 2014-2015 Mercedes-Benz E250 Bluetec 2014-2015 Mercedes-Benz E250 Bluetec 4Matic 2003-2005 Mercedes-Benz E320 Base 2007-2009 Mercedes-Benz E320 Bluetec 2005-2006 Mercedes-Benz E320 CDI 2006-2015 Mercedes-Benz E350 4Matic 2006-2015 Mercedes-Benz E350 Base 2011-2013 Mercedes-Benz E350 Bluetec 2015 Mercedes-Benz E400 4Matic 2015 Mercedes-Benz E400 Base 2013-2015 Mercedes-Benz E400 Hybrid 2003-2006 Mercedes-Benz E500 Base 2003-2006 Mercedes-Benz E55 AMG Base 2007-2014 Mercedes-Benz E550 4Matic 2007-2015 Mercedes-Benz E550 Base 2014-2015 Mercedes-Benz E63 AMG 4Matic 2007-2013 Mercedes-Benz E63 AMG Base 2014-2015 Mercedes-Benz E63 AMG S 4Matic 2013-2015 Mercedes-Benz GLK250 Bluetec 4Matic 2010-2015 Mercedes-Benz GLK350 4Matic 2010-2015 Mercedes-Benz GLK350 Base 1999 Mercedes-Benz S320 LWB 1999 Mercedes-Benz S320 SWB 2006 Mercedes-Benz S350 Base 2012-2013 Mercedes-Benz S350 Bluetec 4Matic 2010-2013 Mercedes-Benz S400 Hybrid 1999 Mercedes-Benz S420 Base 2003-2006 Mercedes-Benz S430 4Matic 2000-2006 Mercedes-Benz S430 Base 2003-2006 Mercedes-Benz S500 4Matic 1999-2006 Mercedes-Benz S500 Base 2000-2001 Mercedes-Benz S500 Guard 2001-2002,2004-2006 Mercedes-Benz S55 AMG Base 2003 Mercedes-Benz S55 AMG Kompressor 2007-2013 Mercedes-Benz S550 4Matic 2007-2013 Mercedes-Benz S550 Base 1999,2001-2013 Mercedes-Benz S600 Base 2008-2013 Mercedes-Benz S63 AMG Base 2006-2013 Mercedes-Benz S65 AMG Base 2015-2016 Mercedes-Benz SL400 Base 2017-2019 Mercedes-Benz SL450 Base 2003-2006 Mercedes-Benz SL500 Base 2004-2008 Mercedes-Benz SL55 AMG Base 2003 Mercedes-Benz SL55 AMG Kompressor 2007-2009,2011-2019 Mercedes-Benz SL550 Base 2004-2009 Mercedes-Benz SL600 Base 2009,2011-2019 Mercedes-Benz SL63 AMG Base 2005-2009,2011,2013-2018 Mercedes-Benz SL65 AMG Base 2009 Mercedes-Benz SL65 AMG Black Series 2012-2015 Mercedes-Benz SLK250 Base 2006-2008 Mercedes-Benz SLK280 Base 2009-2011 Mercedes-Benz SLK300 Base 2005-2015 Mercedes-Benz SLK350 Base 2005-2010,2012-2015 Mercedes-Benz SLK55 AMG Base

Make camber changes in +.5° or +1.0° on many popular models by installing this shim between the hub and steering knuckle. A caliper shim is also included. These durable high-strength nylon shims provide a faster option for correcting negative camber issues.Installation InstructionsThis Part Fits: Year Make Model Submodel 2001-2003 Ford Explorer Eddie Bauer 2001-2003 Ford Explorer Limited 2001-2003 Ford Explorer Postal 2001 Ford Explorer XL Fleet 2001-2003 Ford Explorer XLS 2001-2003 Ford Explorer XLT 2005 Ford Explorer Sport Trac Adrenalin 2001 Ford Explorer Sport Trac Base 2002 Ford Explorer Sport Trac XL 2003-2005 Ford Explorer Sport Trac XLS 2003-2005 Ford Explorer Sport Trac XLT 2003-2005 Ford Ranger Edge 2005-2009 Ford Ranger FX4 2006-2011 Ford Ranger Sport 2004 Ford Ranger Tremor 2003-2011 Ford Ranger XL 2003-2011 Ford Ranger XLT 1984-1993 Jeep Cherokee Base 1991-1992 Jeep Cherokee Briarwood 1985-1988 Jeep Cherokee Chief 1996,1998-2001 Jeep Cherokee Classic 1993-1997 Jeep Cherokee Country 1985-1992 Jeep Cherokee Laredo 1987-1992,1998-2001 Jeep Cherokee Limited 1985-1990 Jeep Cherokee Pioneer 1994-2001 Jeep Cherokee SE 1989-2001 Jeep Cherokee Sport 1987-1992 Jeep Comanche Base 1987-1988 Jeep Comanche Chief 1986 Jeep Comanche Custom 1988-1992 Jeep Comanche Eliminator 1987-1988 Jeep Comanche Laredo 1987-1992 Jeep Comanche Pioneer 1986 Jeep Comanche X 1986 Jeep Comanche XLS 2006 Jeep Commander 65th Anniversary Edition 2006-2007 Jeep Commander Base 2006-2010 Jeep Commander Limited 2007-2009 Jeep Commander Overland 2007-2010 Jeep Commander Sport 1998 Jeep Grand Cherokee 5.9 Limited 2006 Jeep Grand Cherokee 65th Anniversary Edition 1993 Jeep Grand Cherokee Base 1993-2010 Jeep Grand Cherokee Laredo 1993-2010 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 2002-2004,2006-2009 Jeep Grand Cherokee Overland 1994-1995 Jeep Grand Cherokee SE 2004 Jeep Grand Cherokee Special Edition 2002 Jeep Grand Cherokee Sport 2006-2010 Jeep Grand Cherokee SRT8 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Liberty 65th Anniversary Edition 2002-2007 Jeep Liberty Limited 2002-2006 Jeep Liberty Renegade 2005 Jeep Liberty Rocky Mountain Edition 2002-2007 Jeep Liberty Sport 1984-1987 Jeep Wagoneer Base 1984-1990 Jeep Wagoneer Limited 2006 Jeep Wrangler 65th Anniversary Edition 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 1987-1993 Jeep Wrangler Base 1988-1992 Jeep Wrangler Islander 1987-1990 Jeep Wrangler Laredo 1991-1994 Jeep Wrangler Renegade 1995 Jeep Wrangler Rio Grande 2003-2018 Jeep Wrangler Rubicon 1988,1991-1994 Jeep Wrangler S 1988-1995,1997-2004,2007-2017 Jeep Wrangler Sahara 1994-1995,1997-2006 Jeep Wrangler SE 1987-1988,1997-2006,2010-2018 Jeep Wrangler Sport 2016,2018 Jeep Wrangler Sport S 2004-2006 Jeep Wrangler Unlimited 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2018 Jeep Wrangler Unlimited Moab 2005-2018 Jeep Wrangler Unlimited Rubicon 2007-2018 Jeep Wrangler Unlimited Sahara 2010-2018 Jeep Wrangler Unlimited Sport 2016,2018 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2002-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

Make camber changes in +.5° or +1.0° on many popular models by installing this shim between the hub and steering knuckle. A caliper shim is also included. These durable high-strength nylon shims provide a faster option for correcting negative camber issues.Installation InstructionsThis Part Fits: Year Make Model Submodel 2001-2003 Ford Explorer Eddie Bauer 2001-2003 Ford Explorer Limited 2001-2003 Ford Explorer Postal 2001 Ford Explorer XL Fleet 2001-2003 Ford Explorer XLS 2001-2003 Ford Explorer XLT 2005 Ford Explorer Sport Trac Adrenalin 2001 Ford Explorer Sport Trac Base 2002 Ford Explorer Sport Trac XL 2003-2005 Ford Explorer Sport Trac XLS 2003-2005 Ford Explorer Sport Trac XLT 2003-2005 Ford Ranger Edge 2005-2009 Ford Ranger FX4 2006-2011 Ford Ranger Sport 2004 Ford Ranger Tremor 2003-2011 Ford Ranger XL 2003-2011 Ford Ranger XLT 1984-1993 Jeep Cherokee Base 1991-1992 Jeep Cherokee Briarwood 1985-1988 Jeep Cherokee Chief 1996,1998-2001 Jeep Cherokee Classic 1993-1997 Jeep Cherokee Country 1985-1992 Jeep Cherokee Laredo 1987-1992,1998-2001 Jeep Cherokee Limited 1985-1990 Jeep Cherokee Pioneer 1994-2001 Jeep Cherokee SE 1989-2001 Jeep Cherokee Sport 1987-1992 Jeep Comanche Base 1987-1988 Jeep Comanche Chief 1986 Jeep Comanche Custom 1988-1992 Jeep Comanche Eliminator 1987-1988 Jeep Comanche Laredo 1987-1992 Jeep Comanche Pioneer 1986 Jeep Comanche X 1986 Jeep Comanche XLS 2006 Jeep Commander 65th Anniversary Edition 2006-2007 Jeep Commander Base 2006-2010 Jeep Commander Limited 2007-2009 Jeep Commander Overland 2007-2010 Jeep Commander Sport 1998 Jeep Grand Cherokee 5.9 Limited 2006 Jeep Grand Cherokee 65th Anniversary Edition 1993 Jeep Grand Cherokee Base 1993-2010 Jeep Grand Cherokee Laredo 1993-2010 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 2002-2004,2006-2009 Jeep Grand Cherokee Overland 1994-1995 Jeep Grand Cherokee SE 2004 Jeep Grand Cherokee Special Edition 2002 Jeep Grand Cherokee Sport 2006-2010 Jeep Grand Cherokee SRT8 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Liberty 65th Anniversary Edition 2002-2007 Jeep Liberty Limited 2002-2006 Jeep Liberty Renegade 2005 Jeep Liberty Rocky Mountain Edition 2002-2007 Jeep Liberty Sport 1984-1987 Jeep Wagoneer Base 1984-1990 Jeep Wagoneer Limited 2006 Jeep Wrangler 65th Anniversary Edition 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 1987-1993 Jeep Wrangler Base 1988-1992 Jeep Wrangler Islander 1987-1990 Jeep Wrangler Laredo 1991-1994 Jeep Wrangler Renegade 1995 Jeep Wrangler Rio Grande 2003-2018 Jeep Wrangler Rubicon 1988,1991-1994 Jeep Wrangler S 1988-1995,1997-2004,2007-2017 Jeep Wrangler Sahara 1994-1995,1997-2006 Jeep Wrangler SE 1987-1988,1997-2006,2010-2018 Jeep Wrangler Sport 2016,2018 Jeep Wrangler Sport S 2004-2006 Jeep Wrangler Unlimited 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2018 Jeep Wrangler Unlimited Moab 2005-2018 Jeep Wrangler Unlimited Rubicon 2007-2018 Jeep Wrangler Unlimited Sahara 2010-2018 Jeep Wrangler Unlimited Sport 2016,2018 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2002-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

This pair of rear lower control arms are direct replacements for weak or bent factory units on the 80 series Landcruiser. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with a xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you.Installation InstructionsThis Part Fits: Year Make Model Submodel 1991-1997 Toyota Land Cruiser Base

This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise and xAxis joints in the opposite end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Need articulation or alignment changes in the front? Check out the 25455 front adjustable upper control arms!Installation InstructionsThis Part Fits: Year Make Model Submodel 1998-2007 Toyota Land Cruiser Base

This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of road noise and xAxis sealed flex joints in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Need articulation or alignment changes in the front? Check out the 25480 front adjustable upper control arms!Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2023 Lexus GX460 Base 2023 Lexus GX460 Black Line Edition 2014-2023 Lexus GX460 Luxury 2010-2023 Lexus GX460 Premium 2003-2009 Lexus GX470 Base 2023 Toyota 4Runner 40th Anniversary Edition 2003-2023 Toyota 4Runner Limited 2020-2021 Toyota 4Runner Nightshade 2003-2009 Toyota 4Runner Sport 2003-2023 Toyota 4Runner SR5 2018-2023 Toyota 4Runner SR5 Premium 2010-2016,2021-2022 Toyota 4Runner Trail 2017-2023 Toyota 4Runner TRD Off-Road 2018-2023 Toyota 4Runner TRD Off-Road Premium 2015-2023 Toyota 4Runner TRD Pro 2022-2023 Toyota 4Runner TRD Sport 2020-2021 Toyota 4Runner Venture 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

This pair of lower control arms are direct replacements for weak or bent factory units. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of road noise and xAxis sealed flex joints in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Have you lifted your 3rd Gen 4Runner and want to get your drivability back? Checkout SPC's 25460 adjustable front upper control arms!Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2001 Toyota 4Runner Base 1996-2002 Toyota 4Runner Limited 1996-2002 Toyota 4Runner SR5

Replace your ball joint boots on the 25680 arms. This kit This kit includes two boots and two retaining rings. California Residents WARNING

Lifted trucks lose caster which wears tires and leads to wandering at high speeds. These arms improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms. Featuring an upgraded greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80deg of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop travel. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you +-2.0deg of caster and +-2.0deg of camber, so you can put your alignment angles back to specification. Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Patent No. US 7,513,514.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2021-2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT 2022-2023 Ford F-150 Lightning Lariat 2022-2023 Ford F-150 Lightning Platinum 2022-2023 Ford F-150 Lightning Pro 2023 Ford F-150 Lightning Pro SSV 2022-2023 Ford F-150 Lightning XLT

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms. Featuring an upgraded greaseable ball joint and rubber isolated x-axis bushing, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop travel. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's patented ball joint design will get you ±2° of caster and ±2° of camber, beyond what the truck's lower slots provide, so you can put your alignment angles back to specification. Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Also consider SPC #86252 with upgraded bolts and adjustment plates to lock in your alignment and prevent bolt slip on the lower control arm. On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2010 Ford Expedition Eddie Bauer 2007-2010 Ford Expedition EL Eddie Bauer 2008-2017 Ford Expedition EL King Ranch 2007-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2011-2017 Ford Expedition EL XL 2007-2017 Ford Expedition EL XLT 2008 Ford Expedition Funkmaster Flex Edition 2008-2017 Ford Expedition King Ranch 2007-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2011-2017 Ford Expedition XL 2007-2017 Ford Expedition XLT 2007-2008,2010-2014 Ford F-150 FX2 2004-2014 Ford F-150 FX4 2006-2008,2010-2012 Ford F-150 Harley-Davidson Edition 2005-2018,2020 Ford F-150 King Ranch 2004-2018,2020 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2008,2013-2014,2016-2018,2020 Ford F-150 Limited 2009-2018,2020 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2016-2020 Ford F-150 SSV 2004-2014 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2018,2020 Ford F-150 XL 2004-2018,2020 Ford F-150 XLT 2004 Ford F-150 Heritage SVT Lightning 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT 2006-2008 Lincoln Mark LT Base 2008-2015 Lincoln Navigator Base 2008-2015 Lincoln Navigator L 2007 Lincoln Navigator L Luxury 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2007 Lincoln Navigator L Ultimate 2007 Lincoln Navigator Luxury 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select 2007 Lincoln Navigator Ultimate

Restore drivability on lowered 2004-2020 Ford F150 trucks with SPC's control arms. These arms give ±2.0° of camber and -1.0° to +3.0° of caster adjustability while also giving more ball joint articulation on trucks lowered up to 2.5". Featuring an upgraded greasable ball joint and rubber isolated xAxis bushings, these arms are designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop and compression travel. Get your drivability and tracking back: When you lower your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design the arm will get you ±2.0° of camber and -1.0° to 3.0° of caster, so you can put your alignment angles back to specification. Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPC p/n 86250, adjustable cam nut/bracket or 86252, HD cam bolt assemblies. NOTE: These arms are designed specifically for trucks lowered up to 2.5". For lifted trucks check out part number 25680 instead. Patent NO. US 7,513,514This Part Fits: Year Make Model Submodel 2007-2010 Ford Expedition Eddie Bauer 2007-2010 Ford Expedition EL Eddie Bauer 2008-2017 Ford Expedition EL King Ranch 2007-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2011-2017 Ford Expedition EL XL 2007-2017 Ford Expedition EL XLT 2008 Ford Expedition Funkmaster Flex Edition 2008-2017 Ford Expedition King Ranch 2007-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2011-2017 Ford Expedition XL 2007-2017 Ford Expedition XLT 2007-2008,2010-2014 Ford F-150 FX2 2004-2014 Ford F-150 FX4 2006-2008,2010-2012 Ford F-150 Harley-Davidson Edition 2005-2020 Ford F-150 King Ranch 2004-2020 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2008,2013-2014,2016-2020 Ford F-150 Limited 2009-2020 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2016-2020 Ford F-150 SSV 2004-2014 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2020 Ford F-150 XL 2004-2020 Ford F-150 XLT 2004 Ford F-150 Heritage SVT Lightning 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT 2006-2008 Lincoln Mark LT Base 2008-2015 Lincoln Navigator Base 2008-2015 Lincoln Navigator L 2007 Lincoln Navigator L Luxury 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2007 Lincoln Navigator L Ultimate 2007 Lincoln Navigator Luxury 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select 2007 Lincoln Navigator Ultimate

Improve droop travel, drivability and tire wear with SPC's adjustable front upper control arms. Fit bigger tires without rubbing fenders. Featuring a greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles on standard height vehicles as well as lifted and lowered vehicles while maintaining factory ride quality. SPC's tube and plate arms are made in our facility in Colorado. Their proven design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. - Get more droop travel: Don't let the OE ball joints or mono-ball articulation limit your travel. SPC joints are oversized and provide 80° of travel. - Get your drivability and tracking back: Your truck may have started to 'wander' after you lifted it. That is because you lost caster. Install SPC arms and get your 'drivability' back by putting your alignment in specification. - Improve tire clearance: Are youroversized tires rubbing the fenders or frame rails? SPC Adjustable Arms, in combination with the OE adjustments on the lower arm, allow you to dial in alignment spcs at the same time that you move the tire forward/outward in the wheel well by up to 1". NOTE: For Rangers with aluminum knuckles ONLYThis Part Fits: Year Make Model Submodel 2019-2021 Ford Ranger Lariat 2019-2021 Ford Ranger XL 2019-2021 Ford Ranger XLT

Improve droop travel, drivability and tire wear with SPC's adjustable front upper arms for Rangers equipped with steel knuckles. Fit bigger tires without rubbing fenders. Featuring a greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles on standard height vehicles as well as lifted and lowered vehicles while maintaining factory ride quality. SPC's tube and plate arms are made in our facility in Colorado. Their proven design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: Don't let OE ball joint or mono-ball articulation limit your travel. SPC joints are oversized and provide 80° of travel. Get your drivability and tracking back: Your truck may have started to 'wander' after you lifted it. That is because you lost caster. Install SPC arms and get your 'drivability' back by putting your alignment back in specification. Improve tire clearance: Are you oversized tires rubbing the fenders or the frame rails? SPC Adjustable Arms, in combination with the OE adjustments on the lower arm, allow you to dial in alignment specs at the same time that you move the tire forward/outward in the wheel well by up to 1". NOTE: For Rangers with steel knuckles ONLY.This Part Fits: Year Make Model Submodel 2020-2023 Ford Ranger Lariat 2020-2023 Ford Ranger XL 2020-2023 Ford Ranger XLT

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for the Ford Ranger (T6 Platform). Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for teh most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design the arm will get you -1° to +4° of caster and ±3° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.Installation Instructions

Restore lost caster and camber on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Or, use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of arms feature: A patented adjustable ball joint design to dial in Caster and Camber +/-3.0deg. Fully forged steel contruction for maximum strength. Upgraded greasable ball joints. SpecRide bushings with free pivot for extended travel while maintaining factory standards for noise, vibration, and harshness (NVH). On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2013 Infiniti QX56 Base 2014-2019 Infiniti QX80 Base 2016-2017,2019-2020 Infiniti QX80 Limited 2020-2023 Infiniti QX80 Luxe 2021-2023 Infiniti QX80 Premium Select 2021-2023 Infiniti QX80 Sensory 2005-2009 Nissan Armada LE 2021-2023 Nissan Armada Midnight Edition 2010-2015,2017-2023 Nissan Armada Platinum 2018-2020 Nissan Armada Platinum Reserve 2021-2023 Nissan Armada S 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2015,2017-2023 Nissan Armada SL 2011-2015,2017-2023 Nissan Armada SV 2010 Nissan Armada Titanium 2004-2010 Nissan Titan LE 2017-2023 Nissan Titan Platinum Reserve 2008-2015,2017-2023 Nissan Titan PRO-4X 2011-2015,2017-2023 Nissan Titan S 2004-2010 Nissan Titan SE 2011-2015,2017-2021 Nissan Titan SL 2011-2015,2017-2023 Nissan Titan SV 2004-2010 Nissan Titan XE

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2015 Nissan Frontier Desert Runner 2005-2010 Nissan Frontier LE 2005-2008 Nissan Frontier Nismo Off-Road 2009-2015 Nissan Frontier PRO-4X 2011-2015 Nissan Frontier S 2005-2010 Nissan Frontier SE 2011-2015 Nissan Frontier SL 2011-2015 Nissan Frontier SV 2005-2010 Nissan Frontier XE 2005-2012 Nissan Pathfinder LE 2006-2012 Nissan Pathfinder S 2005-2010 Nissan Pathfinder SE 2005-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2005 Nissan Pathfinder XE 2005-2010 Nissan Xterra Off-Road 2011-2015 Nissan Xterra PRO-4X 2005-2015 Nissan Xterra S 2005-2010 Nissan Xterra SE 2006-2015 Nissan Xterra X 2009-2012 Suzuki Equator Base 2009-2012 Suzuki Equator Premium 2009-2012 Suzuki Equator RMZ-4 2009-2012 Suzuki Equator Sport 2001-2007 Toyota Sequoia Limited 2001-2007 Toyota Sequoia SR5 2000-2006 Toyota Tundra Base 2000-2006 Toyota Tundra Limited 2000-2006 Toyota Tundra SR5

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for the Frontier, Pathfinder, and Xterra. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace armsare available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design the arm will get you -1° to +3° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. To make installation easier, SPC now includes a bolt to replace the driver's side rearward bolt, which often needs to be cut out to remove the original arm. If you need more bolts for the other positions order p/n 21035 replacement bolt kit (2 bolts). Do you need replacement cams for the lower controlarm? Check out SPC p/n 87520, which will replace corroded cam bolt assemblies, or can be used on trucks not equipped with factory cam bolts for the lower control arm. These cams should be used with the upper arm kitInstallation InstructionsThis Part Fits: Year Make Model Submodel 2013-2020 Nissan Frontier Desert Runner 2005-2010 Nissan Frontier LE 2005-2008 Nissan Frontier Nismo Off-Road 2009-2023 Nissan Frontier PRO-4X 2022-2023 Nissan Frontier PRO-X 2011-2023 Nissan Frontier S 2005-2010 Nissan Frontier SE 2011-2020 Nissan Frontier SL 2011-2023 Nissan Frontier SV 2005-2010 Nissan Frontier XE 2005-2012 Nissan Pathfinder LE 2006-2012 Nissan Pathfinder S 2005-2010 Nissan Pathfinder SE 2005-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2005 Nissan Pathfinder XE 2005-2010 Nissan Xterra Off-Road 2011-2015 Nissan Xterra PRO-4X 2005-2015 Nissan Xterra S 2005-2010 Nissan Xterra SE 2006-2015 Nissan Xterra X 2009-2012 Suzuki Equator Base 2009-2012 Suzuki Equator Premium 2009-2012 Suzuki Equator RMZ-4 2009-2012 Suzuki Equator Sport

This proprietary SpecRide Bushing Replacement Kit provides superior performance and durability for your 25465/25490 Toyota Adjustable Control arms. Each kit contains 4 SpecRide bushings with free moving pivot sleeves designed to survive the toughest environments and extended travel suspensions. SpecRide bushings provide noise and vibration control and are resistant to oil, ozone, and alkaline conditions.Installation Instructions

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long-life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2022 Toyota Sequoia Limited 2021-2022 Toyota Sequoia Nightshade 2008-2022 Toyota Sequoia Platinum 2008-2022 Toyota Sequoia SR5 2020-2022 Toyota Sequoia TRD Pro 2018-2022 Toyota Sequoia TRD Sport 2014-2021 Toyota Tundra 1794 Edition 2007-2013 Toyota Tundra Base 2007-2021 Toyota Tundra Limited 2021 Toyota Tundra Nightshade 2010-2021 Toyota Tundra Platinum 2014-2021 Toyota Tundra SR 2007-2011,2014-2021 Toyota Tundra SR5 2021 Toyota Tundra Trail 2015-2017,2019-2021 Toyota Tundra TRD Pro

This proprietary SpecRide Bushing Replacement Kit provides superior performance and durability for your 25485 Toyota Adjustable Control arms. Each kit contains 4 SpecRide bushings with free movign pivot sleeves designed to survive the toughest environments and extended travel suspensions. SpecRide bushings provide noise and vibration control and are resistant to oil, ozone, and alkaline conditions. California Residents WARNING

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long-life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPC p/n 25445, which will replace corroded cam bolt assemblies. On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray finish for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2001-2007 Toyota Sequoia Limited 2001-2007 Toyota Sequoia SR5 2000-2006 Toyota Tundra Base 2000-2006 Toyota Tundra Limited 2000-2006 Toyota Tundra SR5

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long-life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more drrop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows for more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles adn move oversized tires forward in the wheel well to minimize or avoid fender trimming. On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2023 Lexus GX460 Base 2023 Lexus GX460 Black Line Edition 2014-2023 Lexus GX460 Luxury 2010-2023 Lexus GX460 Premium 2003-2009 Lexus GX470 Base 2023 Toyota 4Runner 40th Anniversary Edition 2003-2023 Toyota 4Runner Limited 2020-2021 Toyota 4Runner Nightshade 2003-2009 Toyota 4Runner Sport 2003-2023 Toyota 4Runner SR5 2018-2023 Toyota 4Runner SR5 Premium 2010-2016,2021-2022 Toyota 4Runner Trail 2017-2023 Toyota 4Runner TRD Off-Road 2018-2023 Toyota 4Runner TRD Off-Road Premium 2015-2023 Toyota 4Runner TRD Pro 2022-2023 Toyota 4Runner TRD Sport 2020-2021 Toyota 4Runner Venture 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Replace your balljoint boots on several popular upper control arms. This kit includes 2 ball joint boots and 2 retaining rings.Installation Instructions

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms on many Toyota trucks SUVs. Featuring our long-life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower arm? Check out SPC p/n 25435, which will replace corroded cam bolt assemblies. On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2009 Lexus GX470 Base 2003-2009 Toyota 4Runner Limited 2003-2009 Toyota 4Runner Sport 2003-2009 Toyota 4Runner SR5 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2015,2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2010-2013 Toyota Tacoma X-Runner

This proprietary SpecRide Bushing Replacement Kit provides superior performance and durability for your 25460 Toyota Adjustable Control arms. Each kit contains 4 SpecRide bushings with free moving pivot sleeves designed to survive the toughest environments and extended travel suspensions. SpecRide bushings provide noise and vibration control and are resistant to oil, ozone, and alkaline conditions.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2001 Toyota 4Runner Base 1996-2002 Toyota 4Runner Limited 1996-2002 Toyota 4Runner SR5 1995-2004 Toyota Tacoma Base 1998 Toyota Tacoma DLX 1998-2000 Toyota Tacoma Limited 1998-2004 Toyota Tacoma Pre Runner 1995-2000 Toyota Tacoma SR5

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for Toyota Land Cruisers (200 Series). Featuring our long-life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design the arm will get you +0° to +4° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need heavy duty rear lower arms? Check out SPC p/n 25965, which are move than 2x stronger than the OE arms. On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2011,2013-2021 Lexus LX570 Base 2008-2011,2013-2021 Toyota Land Cruiser Base 2020-2021 Toyota Land Cruiser Heritage Edition

When you lift your truck you affect caster and camber. SPC's arm have +1° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPC p/n 25430, which will replace corroded cam bolt assemblies. On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2001 Toyota 4Runner Base 1996-2002 Toyota 4Runner Limited 1996-2002 Toyota 4Runner SR5 1995-2004 Toyota Tacoma Base 1998 Toyota Tacoma DLX 1998-2000 Toyota Tacoma Limited 1998-2004 Toyota Tacoma Pre Runner 2001-2004 Toyota Tacoma S-Runner 1995-2000 Toyota Tacoma SR5