Russell Performance -6 AN ProFlex Stainless Steel Braided Hose (Pre-Packaged 20 Foot Roll)
$142.93
These Hoses are constructed with a stainless steel outer braid that resists abrasion and corrosion, both have a Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid that will not collapse under extreme heat, yet is extremely flexible. Superior ProRace hose has the same features as ProFlex but with a specially formulated CPE synthetic inner liner that is embedded with a partial coverage stainless steel inner braid, then bonded together by a full coverage stainless outer braid for 50% more strength.
Russell Performance -6 AN ProClassic Black Hose (Pre-Packaged 10 Foot Roll)
$72.25
For racers and performance enthusiasts who want high quality plumbing that is lighter and easier to assemble than traditional braided steel hose, Russell ProClassic Hose is the perfect choice. It features a lightweight nylon fiber outer braid over a durable rubber core with a maximum pressure rating of 350 psi. It is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, or antifreeze.
Russell Performance -8 AN ProFlex Stainless Steel Braided Hose (Pre-Packaged 50 Foot Roll)
$351.04
These Hoses are constructed with a stainless steel outer braid that resists abrasion and corrosion, both have a Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid that will not collapse under extreme heat, yet is extremely flexible. Superior ProRace hose has the same features as ProFlex but with a specially formulated CPE synthetic inner liner that is embedded with a partial coverage stainless steel inner braid, then bonded together by a full coverage stainless outer braid for 50% more strength.
Russell Performance -6 AN ProClassic Black Hose (Pre-Packaged 50 Foot Roll)
$359.96
For racers and performance enthusiasts who want high quality plumbing that is lighter and easier to assemble than traditional braided steel hose, Russell ProClassic Hose is the perfect choice. It features a lightweight nylon fiber outer braid over a durable rubber core with a maximum pressure rating of 350 psi. It is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, or antifreeze.
Russell Performance -6 AN ProFlex Stainless Steel Braided Hose (Pre-Packaged 50 Foot Roll)
$361.25
These Hoses are constructed with a stainless steel outer braid that resists abrasion and corrosion, both have a Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid that will not collapse under extreme heat, yet is extremely flexible. Superior ProRace hose has the same features as ProFlex but with a specially formulated CPE synthetic inner liner that is embedded with a partial coverage stainless steel inner braid, then bonded together by a full coverage stainless outer braid for 50% more strength.
Russell Performance -10 AN Twist-Lok 90 Degree Hose End (Black)
$24.86
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -8 AN Twist-Lok 90 Degree Hose End (Black)
$23.76
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -6 AN Twist-Lok 90 Degree Hose End (Black)
$21.61
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -10 AN Twist-Lok 45 Degree Hose End (Black)
$24.86
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -8 AN Twist-Lok 45 Degree Hose End (Black)
$23.76
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -6 AN Twist-Lok 45 Degree Hose End (Black)
$21.61
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -10 AN Twist-Lok Straight Hose End
$8.75
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -8 AN Twist-Lok Straight Hose End
$6.96
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -6 AN Twist-Lok Straight Hose End
$5.80
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize.
Russell Performance -10 AN Endura Pwerflex Power Steering Straight Hose Ends
$24.53
Powerflex Power Steering Hose Ends with Endura finish are available in three different AN sizes (-6, -8 and -10). These hose ends are suitable for high pressure power steering use and are corrosion resistant .
Russell Performance -3 AN PowerFlex 90 Degree Hose End
$16.19
Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Russell Performance -6 AN Endura Pwerflex Power Steering 90 Degree Hose Ends
$23.76
Powerflex Power Steering Hose Ends with Endura finish are available in three different AN sizes (-6, -8 and -10). These hose ends are suitable for high pressure power steering use and are corrosion resistant .
Russell Performance -6 AN Endura Pwerflex Power Steering 45 Degree Hose Ends
$21.61
Powerflex Power Steering Hose Ends with Endura finish are available in three different AN sizes (-6, -8 and -10). These hose ends are suitable for high pressure power steering use and are corrosion resistant .
Russell Performance -6 AN Endura Pwerflex Power Steering Straight Hose Ends
$15.11
Powerflex Power Steering Hose Ends with Endura finish are available in three different AN sizes (-6, -8 and -10). These hose ends are suitable for high pressure power steering use and are corrosion resistant .
Russell Performance -8 AN Tube Seals
$8.61
Russell Tube Seal Hose Ends are designed to add that finishing hose end appearance with the ease of installation of a hose clamp. These tube seals are available in sizes to fit from 1/4" vacuum hose to 3/4" heater hose, and are offered in four choices of colors: red, blue, chrome and Black.
Russell Performance -10 AN 90 Degree Hose End Without Socket - Black
$24.86
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance -6 AN 90 Degree Male AN to Female AN Fitting (Black)
$18.36
Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Russell Performance -4 AN 90 Degree Male AN to Female AN Fitting
$17.29
Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Russell Performance -8 AN Black 180 Degree Full Flow Swivel Hose End
$22.69
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance -8 AN Black/Silver 180 Degree Tight Radius Full Flow Swivel Hose End
$22.69
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance -8 AN Endura 180 Degree Full Flow Swivel Hose End (With 3/4in Radius)
$23.76
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance -6 AN Black 180 Degree Full Flow Swivel Hose End
$21.61
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance -10 AN Black/Silver 120 Degree Tight Radius Full Flow Swivel Hose End
$24.86
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance -8 AN Black 120 Degree Full Flow Swivel Hose End
$22.69
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance -6 AN Black 120 Degree Full Flow Swivel Hose End
$21.61
Russell's Full Flow Swivel Hose Ends swivel 360-? to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes.
Russell Performance 5/16in SAE Quick Disc Female to -6 Hose Black Straight Degree Hose End
$18.36
Russell Full Flow Hose Ends are made from lightweight aluminum and are completely reusable. They feature a unique taper design ensuring easy assembly and also offer 37-? angled sealing surface which guarantees a positive anti-leak seal. These Full Flow Hose Ends accepts a wide variety of lightweight aluminum AN style adapter and carburetor fittings. Lastly, these Russell Fittings are interchangeable with many other manufacturers' hose ends.
Russell Performance 3/8in SAE Quick Disc Female to -6 Hose Black 180 Degree Hose End
$25.94
Russell Full Flow Hose Ends are made from lightweight aluminum and are completely reusable. They feature a unique taper design ensuring easy assembly and also offer 37-? angled sealing surface which guarantees a positive anti-leak seal. These Full Flow Hose Ends accepts a wide variety of lightweight aluminum AN style adapter and carburetor fittings. Lastly, these Russell Fittings are interchangeable with many other manufacturers' hose ends.
Russell Performance 3/8in SAE Quick Disc Female to -6 Hose Black 90 Degree Hose End
$24.86
Russell Full Flow Hose Ends are made from lightweight aluminum and are completely reusable. They feature a unique taper design ensuring easy assembly and also offer 37-? angled sealing surface which guarantees a positive anti-leak seal. These Full Flow Hose Ends accepts a wide variety of lightweight aluminum AN style adapter and carburetor fittings. Lastly, these Russell Fittings are interchangeable with many other manufacturers' hose ends.
Russell Performance 3/8in SAE Quick Disc Female to -6 Hose Black Straight Hose End
$18.36
Russell Full Flow Hose Ends are made from lightweight aluminum and are completely reusable. They feature a unique taper design ensuring easy assembly and also offer 37-? angled sealing surface which guarantees a positive anti-leak seal. These Full Flow Hose Ends accepts a wide variety of lightweight aluminum AN style adapter and carburetor fittings. Lastly, these Russell Fittings are interchangeable with many other manufacturers' hose ends.
Russell Performance -12 AN Proclassic Crimp 180 Degree End (O.D. 0.950)
$30.26
ProClassic Crimp-On hose ends make custom hose fabrication easy. Simply cut the hose, push together the hose and fitting and crimp! Their lightweight collar design is engineered by size for precise compression ensuring proper end attachment with Russell manual crimper and appropriate crimper die. Replacement collars are available in the event you want to re-use the hose end on a different assembly. They are available in -4 through -12 sizes and are packaged complete with collar. Crimper and dies sold separately.
Russell Performance -12 AN Proclassic Crimp 45 Degree End (O.D. 0.950)
$30.26
ProClassic Crimp-On hose ends make custom hose fabrication easy. Simply cut the hose, push together the hose and fitting and crimp! Their lightweight collar design is engineered by size for precise compression ensuring proper end attachment with Russell manual crimper and appropriate crimper die. Replacement collars are available in the event you want to re-use the hose end on a different assembly. They are available in -4 through -12 sizes and are packaged complete with collar. Crimper and dies sold separately.