ROUSH Performance's Resonator Delete Y-Pipe is a quick and affordable way to eliminate your factory resonator to get deep, aggressive and race-inspired sound. Our Y-Pipe increases flow through your 2015-2023 Mustang I4 exhaust system for maximum horsepower and torque. The 2.5-inch Y-Pipe assembly is made from high-grade mandrel-bent 304 stainless steel to ensure maximum flow with less back pressure and long-lasting durability. The system is designed and engineered using OEM vehicle CAD data to ensure perfect fit. ROUSH Performance recommends checking your local noise ordinance levels prior to purchase. Pair with our axle back kits to take your Mustang to the next level!2015-2023 Mustang 3.7L ROUSH V6 and 2.3L Ecoboost Exhaust Kit (#421837)This Part Fits: Year Make Model Submodel 2015-2023 Ford Mustang EcoBoost 2015-2019 Ford Mustang EcoBoost Premium

The ROUSH Performance Cold Air Intake for 2018-2023 F-150 2.7/3.5L Ecoboost V6 engines (including Raptor) brings staggering performance increases, achieved with an installation that takes under an hour, and does not require any calibration! F-150s will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock airbox. Providing up to 25% less intake restriction than stock in forced induction applications, this cold air intake kit is the most highly-engineered kit of its kind on the market. Latent potential in power and fuel efficiency that would otherwise be restricted, as well as reduced pressure drop, are two important benefits of this system. Custom tuning is not a requirement, as this CAI system was engineered and tested specifically for this application. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance.This Part Fits: Year Make Model Submodel 2018-2023 Ford F-150 King Ranch 2018-2023 Ford F-150 Lariat 2018-2023 Ford F-150 Limited 2018-2023 Ford F-150 Platinum 2018-2023 Ford F-150 Police Responder 2018-2023 Ford F-150 Raptor 2018-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2018-2023 Ford F-150 XL 2018-2023 Ford F-150 XLT

ROUSH's newly-designed cold air intake for the 2018-2023 2.3L I-4 Ecoboost engine brings staggering performance increases that can be achieved with an installation that takes under an hour, with no calibration required! The ROUSH EcoBoost Cold Air Intake replaces the restrictive stock air intake, unlocking latent power and fuel efficiency. There's no need for calibration or a custom tune, as this CAI system was engineered, tested, and designed to work with the completely stock 2.3L I-4 engine! Paired with Ford's innovative EcoBoost engine, our ROUSH Cold Air Kit feeds cooler, denser air to the turbo, increasing overall power output, while also turning up the sound of your Mustang! Our kit provides more flow than the stock system at peak horsepower. Best of all, this system will not void your factory warranty!This Part Fits: Year Make Model Submodel 2018-2023 Ford Mustang EcoBoost

The all-new 2018-2021 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air intake than the standard stock airbox. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application, ensuring MAF signal performance matches factory settings. Included is an innovative airbox lid with see-through lens. Our dry filter is proven to retain its shape under high airflow, and is composed of an inner and outer layer of wire mesh for durability and reliable support of filtration media. The filter requires no oiling and is easily washable for re-use.This Part Fits: Year Make Model Submodel 2018-2021 Ford Mustang GT

Ready to race, or just show off the performance capabilities of the 2018-2023 Mustang? Add ROUSH Rear Valance Aero Foil Kit, designed to work with the factory quad-tip GT valance! Designed utilizing techniques used in racing to improve aerodynamic efficiencies, ROUSH Rear Valance Air Foils work to separate the airflow beneath the car, allowing a smaller portion to follow the under-body contours, adjusting rear downforce. Each piece is made from high-strength TPO (thermal plastic olefin) with a black stipple finish, for an OEM look and lasting durability. The plastic is molded with high-pressure injection, the same process used by OE automotive manufactures, which allows for impact resistance and durable flexibility, while remaining lightweight with low density.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2018-2023 Ford Mustang EcoBoost 2018-2023 Ford Mustang EcoBoost Premium 2018-2023 Ford Mustang GT 2018-2023 Ford Mustang GT Premium 2021-2023 Ford Mustang Mach 1 2018-2020 Ford Mustang Shelby GT350 2018-2020 Ford Mustang Shelby GT350R 2020-2022 Ford Mustang Shelby GT500

Give your 2018-2023 Mustang's front end an aggressive front end appearance with ROUSH Fascia Corner Pockets! They are made from high-strength, lightweight TPO (Thermal Plastic Olefin), and feature a black stipple finish for an OEM look and long-lasting durability. The plastic is molded with high-pressure injection (the same process used by automotive manufacturers), creating an impact-resistant, tough, yet flexible insert. This kit is designed with OEM CAD data for optimum quality and fitment, and includes the ROUSH 90-Day Limited Parts Warranty. All necessary hardware for installation is included (pockets, reinforcements, fasteners, and installation template). Please note: installation will require you to modify the factory Ford bumper cover (please reference instruction manual for further details). Looking to complete your front end ROUSH styling transformation? Add the 2018-2023 Ford Mustang ROUSH Lower Grille (P/N 422081) and ROUSH Chin Spoiler (P/N 422082)!This Part Fits: Year Make Model Submodel 2018-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2018-2023 Ford Mustang GT 2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500

Standard on all ROUSH vehicle packages for 2018-2023, ROUSH Hood Heat Extractors are the ultimate addition to the hood of your 2018-2023 Mustang GT or EcoBoost! Hood Heat Extractors add an aggressive touch, and are fully-functional. They are molded raw black and allow the release of heat from the engine bay. Designed with rearward-facing openings, each notch in the surface creates a small low-pressure aero zone to help release heat. ABS is lightweight, durable, heat resistant, and impact resistant. As with all ROUSH products, the Hood Heat Extractors are manufactured in-house and were designed using original manufacturer CAD data for superior quality and optimum fit. They come with the necessary hardware and instructions.This Part Fits: Year Make Model Submodel 2018-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2018-2023 Ford Mustang GT 2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500

Designed utilizing techniques used in racing to improve aerodynamic efficiencies, the ROUSH Chin Spoiler separates airflow above and beneath the Mustang, working to reduce overall aero drag. The included market-exclusive Wheel Shrouds separate the turbulent wheel well airflow from the body's exterior slip stream. This ROUSH exclusive for the 2018-2023 Mustang performs so well in generating downforce, it includes stout supporting brackets to transfer the forces to the chassis. For best results, pair this kit with the Ford Performance Package under-engine tray/belly pan (suggested but not required).Each piece is made from high-strength TPO (thermal plastic olefin) with a black stipple finish for an OEM look and lasting durability. The plastic is molded with high-pressure injection, the same process used by OE automotive manufactures, which allows for impact resistance and durable flexibility, while remaining lightweight with low density.This Part Fits: Year Make Model Submodel 2018-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2018-2023 Ford Mustang GT 2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500

Keep your supercharged F-150 intercooler temperatures under control with the ROUSH Low-Temperature Radiator Fan Kit. Designed specifically for 2015-2017 ROUSH F150 supercharger systems, the ROUSH Low-Temperature Radiator Fan Kit is a perfect fit over the 2015-2017 ROUSH F-150 intercooler radiator without any modifications.Adding a high-flow fan to your intercooler radiator provides more efficient cooling by increasing the airflow across the radiator, which results in lower intercooler water temperatures to provide air charge cooling 27 times faster than stock. Cooling intercooler water faster helps to lower inlet temperatures and maintain peak horsepower under extreme conditions like hot-lapping at the drag strip or sitting in heavy traffic.The compact, aluminum design also allows for quick and easy installation in under an hour with standard garage hand tools.This Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 King Ranch 2015-2017 Ford F-150 Lariat 2015-2017 Ford F-150 Platinum 2016-2017 Ford F-150 SSV 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT

ROUSH Performance's Resonator Delete X-Pipe is an affordable way to eliminate your factory resonator to get amazing race-inspired sound. Our X-Pipe increases flow through your 2015-2023 Mustang GT exhaust system, including Ford's factory active exhaust, for maximum horsepower and torque.The Resonator Delete X-Pipe is a quick and easy way to improve the sound and performance of your 2015-2023 Mustang on the road.The 2.5-inch X-Pipe assembly is made from high-grade mandrel-bent stainless steel to ensure maximum flow with less back pressure and long-lasting durability. The system is designed and engineered using OEM vehicle CAD data to ensure perfect fit.This Part Fits: Year Make Model Submodel 2019 Ford Mustang Bullitt 2022-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2015-2023 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2019,2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500

The ROUSH hood strut kit for 2015-2023 Mustangs open the hood at a greater angle, without having to manually prop the hood open. Calibrated extension dampening allows the hood to open and rise automatically and provides a better view of the entire engine compartment.ROUSH hood struts use your factory OEM attachment points and require no drilling to install. The kit contains black e-coated stainless steel brackets with the ROUSH logo laser etched into the brackets and heavy duty gas-charged struts.ROUSH Mustang hood struts fit all 2015- 2023 Mustangs including the V6, Ecoboost and GT models. These gas-charged struts are designed and engineered to work with the factory hood design and weight.NOTE: Using these struts with any other type of hood may produce bowing or may put too much of a load on the struts and they may not provide sufficient support to keep the hood in the upright position.This Part Fits: Year Make Model Submodel 2019 Ford Mustang Bullitt 2015-2023 Ford Mustang EcoBoost 2015-2019,2022-2023 Ford Mustang EcoBoost Premium 2015-2023 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2019,2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

The ROUSH Phase 2 supercharger upgrade kit builds on the outstanding performance of our 2015-2017 F150 Phase 1 supercharger system by adding proven core components and careful calibration. This kit adds an additional 50 horsepower and 28 lb-ft of torque when used with our 600 hp/ 557 lb-ft Phase 1 supercharger system (PN 421983). The result is an outstanding 650 hp / 557 lb-ft of torque while retaining the daily confidence you expect from the engineering of ROUSH Performance.ROUSH engineers spend hundreds of hours in the laboratory, on the dyno, and out in the field to ensure the components and calibration deliver consistent performance in all conditions.The upgrade installs easily with a higher boost 75 mm supercharger pulley and a ROUSH Diagnostic Tool (RDT) Phase 2 reflash voucher. The upgraded Phase 2 calibration can be downloaded to your ECU in minutes by your dealer.This Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 King Ranch 2015-2017 Ford F-150 Lariat 2016-2017 Ford F-150 Limited 2015-2017 Ford F-150 Platinum 2017 Ford F-150 Raptor 2016-2017 Ford F-150 SSV 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT

The ROUSH RHD, (Right Hand Drive), modification kit for the R2300 Phase 1 and R2300 Phase 2 systems, part numbers 421823 and 422001 respectively, allows owners of RHD 2015-2017 Mustang GT's with 5.0L V8 engines the ability to infuse their Mustangs with up to 727 horsepower. This kit is only needed for RHD 2015-2017 Mustangs, and only contains the additional parts needed to install the ROUSH R2300 on factory RHD built Mustangs.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang EcoBoost Premium 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

ROUSH Performance's Phase 2 Supercharger system boosts performance to 727 horsepower for the 2015-2017 Ford Mustang 5.0L V8, the ROUSH 2.3L Phase 2 Calibrated Supercharger System is part of the TVS line of superchargers developed by ROUSH.Our Phase 2 system builds on the outstanding performance of our 2015-2017 Phase 1 supercharger system, by adding proven core components and careful calibration for an additional 57 horsepower and 65 lb-ft of torque.The ROUSH R2300 TVS supercharger is a roots-type positive displacement supercharger that features twin four-lobe rotors twisted 160-degrees vs older three lobe, 60 degree twist technology. The fourth lobe and the added twist, when combined with newly-redesigned air inlet and outlet ports, offers greatly enhanced thermal effciency, higher volumetric capacity, higher operating speeds, a smoother, more effcient flow of air into the engine, and improved noise and vibration characteristics.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang EcoBoost Premium 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

The ROUSH Phase 2 supercharger upgrade kit builds on the outstanding performance of our 2015-2017 Phase 1 supercharger system by adding proven core components and careful calibration, for an additional 57 horsepower and 65 lb-ft of torque. The result is an outstanding 727 hp / 610 lb-ft of torque while retaining the daily confidence you expect from the engineering of ROUSH Performance. ROUSH engineers spend hundreds of hours in the laboratory, on the dyno, and out in the field to ensure the components and calibration deliver consistent performance in all conditions.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang EcoBoost Premium 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

Looking to obtain the iconic ROUSH exhaust sound for your F-150, but want a more OEM look?Some great quality features of this exhaust are: Amazing ROUSH sound is sporty and aggressive. The muffler, y-pipe, and inlet/outlet pipes are made from high-grade 304 stainless steel and are mandrel-bent to ensure consistent flow, high performance, and long-lasting durability. Exhaust tips are constructed of high-quality stainless steel for superior corrosion resistance and durability, and are embossed with the ROUSH logo, which exit out of the side of the vehicle. The piping in this system is 3-inch diameter, and mandrel-bent to promote consistent flow throughout. Other companies tend to crimp-bend their exhaust, which can cause restrictions and inconsistent flow. This exhaust kit is designed to work on all cab and bed configurations for the 2015-2020 F150 with 5.0L, 3.5L Ti-VCT, 3.5L Ecoboost (non-Raptor), and 2.7 Ecoboost engines.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2017-2020 Ford F-150 Raptor 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Your F-150 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 25% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 28 RWHP and 27 ft-lbs RWTQ (tested on 2016 3.5L EcoBoost platform) with no PCM re-calibration required!The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance. Our high-flow, high-capacity dry filter requires no oiling and is easily washable for re-use.This Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 King Ranch 2015-2017 Ford F-150 Lariat 2016-2017 Ford F-150 Limited 2015-2017 Ford F-150 Platinum 2017 Ford F-150 Raptor 2016-2017 Ford F-150 SSV 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT

Your 2015-2017 Ford F-150 5.0L V8 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 31% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 13.9 RWHP and 19.7 lb-ft RWTQ with no PCM re-calibration required!The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound.Our high-flow, high-capacity dry filter is proven to retain its shape. The filter requires no oiling and is easily washable for re-use. Included in the kit is the air filter with clamp, oversized injection-molded air box tray, a clean air tube, 105mm mass air flow tube, and all required mounting hardware and instructions.This Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 King Ranch 2015-2017 Ford F-150 Lariat 2016-2017 Ford F-150 Limited 2015-2017 Ford F-150 Platinum 2017 Ford F-150 Raptor 2016-2017 Ford F-150 SSV 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT

Have you been searching for the perfect indoor/outdoor car cover for your 2015-2023 ROUSH Mustang? Look no further! This ROUSH Stormproof Car Cover is proudly stamped with the two-toned ROUSH logo and comes with a compact storage bag. The cover is made of highly water-resistant and breathable fabric and provides outstanding protection from the sun's harmful UV rays. The soft microfiber fabric won't scratch your Mustang's finish and is untreated and uncoated, which means your cover will continue to look fresh for years to come without fading. Image not representative of actual productThis Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2023 Ford Mustang EcoBoost 2015-2023 Ford Mustang EcoBoost Premium 2015-2023 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2023 Ford Mustang GT Premium 2021-2023 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Convert your ROUSH Quad Tip exhaust to a full Active exhaust and take control of your Exhaust note. Our Active Exhaust upgrade kit makes any 2015-2023 Active Ready quad-tip exhaust system into an active exhaust that allows you to tune your exhaust note using our iOS application for virtually infinite sound possibilities. The system utilizes an easily installed valve system that adjusts the flow of the exhaust, thereby adjusting tone and volume. Plug and play Installation requires no cutting or welding. Included in the kit is a 4 mode selector knob with faceplate so you easily switch to pre-set and custom modes on the fly.Converts the following ROUSH Active Ready Quad Tip Exhaust Systems to Full Active Exhaust Systems: 5.0L V8 Active Ready Exhaust Part #421921 2.3L I4 Active Ready Exhaust Part #421923This Part Fits: Year Make Model Submodel 2015-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2015-2023 Ford Mustang GT 2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500

Completely redesigned for maximum performance, the ROUSH Performance Extreme Axle-Back Exhaust gives your 2005-2010 GT or 2007-2010 GT500 a much more aggressive growl than ever before!This ROUSH Extreme Axle-Back Exhaust is constructed of 409 aluminized stainless steel piping for its durability, which is also mandrel-bent for consistent flow throughout. The system is then finished off by 304 stainless steel chrome-flashed tips (embossed with the ROUSH logo) for superior look as well as superior durability & corrosion resistance. The straight through design is much less restrictive and gives this exhaust a tough, deep sound unique to ROUSH exhausts that lets people know you are driving something that means business. Included will be all necessary hardware and instructions for installation.This Part Fits: Year Make Model Submodel 2005-2010 Ford Mustang GT 2007-2010 Ford Mustang Shelby GT500

The 2015-2023 Mustang ROUSH Rear Spoiler is just the thing to overhaul the look of your 2015-2023 Mustang's rear end. This race-inspired rear wing from ROUSH is notched out for maximum rear visibility, and fits all 2015-2023 Mustangs. It is made from light-weight and durable ABS plastic. ROUSH spoilers are designed and manufactured using OEM CAD data and manufacturing processes, guaranteeing optimal quality and perfect fit. Installation requires no sanding or trimming and is frustration free with the inclusion of templates, hardware, and high strength adhesive tape.This Part Fits: Year Make Model Submodel 2015-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2015-2023 Ford Mustang GT 2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

An optional feature on the 2015-2017 RS3, ROUSH Heat Extractors are the ultimate addition to the hood of your 2015-2017 Mustang GT, as they add an aggressive touch while remaining fully-functional. The Heat Extractors are molded raw black and help to release heat away from the engine. The material, light-weight TPO and ABS is durable, heat resistant, and impact resistant. ROUSH has used ABS in the making of countless products, proving its quality. As with all ROUSH products, the Heat Extractors are manufactured in-house and were designed using original manufacturer CAD data for superior quality and optimum fit, and come with the necessary hardware and instructions. 2016-2017 MY fitment does not allow for factory turn signal, found in factory extractor, to carry over ROUSH heat extractors are designed to fit the 2015-2017 Mustang GT Hood and require minimal drilling and basic hand tools to install. Other 2015-2017 Mustang hoods may require cutting.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang EcoBoost Premium 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

ROUSH's 2015-2017 Front Fascia gives Ford's 6th generation Mustang a formidable new look that sets it apart from stock. ROUSH body kit parts are designed from the ground up and manufactured in house out of Durable OEM quality TPO plastics. ROUSH parts are designed using Ford's own CAD data allowing for parts that have a perfect fit right out of the box, with no cutting or sanding required. Not compatible with Mustangs with Collision detection or adaptive cruise control. Product is the Front Fascia only. Upper Grille, Lower Grill and Chin Splitter and Aero Pockets are not included.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang GT 2015-2017 Ford Mustang V6

Dramatically improve your Mustang's handling and appearance with ROUSH Coilovers. Our Single Adjustable Suspension Kit combines a set of performance struts and shocks, tuned for a perfect balance of control and comfort, with height adjustable performance springs. This kit will lower your Mustang 1.5 inches in the front and 1.0 in the rear with plenty of room for additional adjustment. Easily tailor the stance of your ride, or adjust corner weights for optimum balance. Rated for over 1.0g lateral acceleration, this kit is perfect for track days, autocross or a spirited drive down your favorite back road. ROUSH Suspension Kits are engineered and tested to achieve proper balance with whole vehicle as an integrated system and will take your Mustang to the next level.This Part Fits: Year Make Model Submodel 2015-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2015-2023 Ford Mustang GT 2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

ROUSH's Axle-Back Exhaust for the 2015-2023 I4 2.3L Ecoboost & V6 3.7L Mustangs is a great solution for anyone looking for a much more aggressive tone, and an overall better look!Ford's stock exhaust doesn't quite have the aggressive tone or sound Mustang owners crave; this is where ROUSH Performance comes in! ROUSH Performance has a specially engineered this exhaust that fits both the V6 3.7L and the I4 2.3L 2015-2023 Mustangs. Constructed from T-304 stainless steel, this exhaust is corrosion and stain resistant. Mandrel bends help to maintain high flow and reduce backpressure constantly throughout. This exhaust uses factory mounting points and will fit both V6 and I4 Mustangs without requiring any modification or welding. This exhaust system also greatly improves the sound and performance of your Mustang with single-tip high-flow chambered mufflers.This Part Fits: Year Make Model Submodel 2015-2023 Ford Mustang EcoBoost 2022-2023 Ford Mustang EcoBoost Premium 2022-2023 Ford Mustang GT 2022-2023 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Give your 2015-2017 5.0L Mustang a more aggressive sound and boost performance with a ROUSH exhaust system. 2015-2017 ROUSH Axle Back exhaust systems are constructed of corrosion resistant T-304 stainless Steel and are mandrel bent. Mandrel bending maintains a constant inner diameter with no kinks or creases. This improves exhaust flow and reduces backpressure in the system. This system includes single tip High flow mufflers that improve the stock sound of the Mustang V8 This system will produce louder deeper exhaust tone, with a healthy V8 burble at idle, building to a powerful roar at high revs. Check your local noise ordinances for legality.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang EcoBoost Premium 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

The all-new 2015-2017 Mustang 3.7L ROUSH V6 Cold Air Kit is the perfect addition to any 2015 V6 Mustang. A more efficient air-intake than the stock air filter assembly, ROUSH's cold air kits unlock latent power potential and fuel efficiency that would otherwise be restricted. Custom calibration is not required and a noticeable increase of 10.5 hp and 9 lb-ft of torque is possible. This high flow system has 20% less intake restriction compared to the stock induction systemThe kit includes an dry filter that retains its shape during high airflow and is made up of an inner and outer layer of wire mesh that ensures durability and support of the filtration media. You don't' need to use messy oils to maintain this filter, just simply wash it and let it dry. The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang V6

ROUSH's newly-designed cold air intake for the 2015-2017 2.3L I4 Ecoboost engine brings staggering performance increases that can be achieved with an installation that takes under an hour with no calibration required!The ROUSH EcoBoost Cold Air Intake replaces the restrictive stock air intake, unlocking latent power. There's no need for a custom tune, as this CAI system was engineered and designed to work with the completely stock 2.3L I4 engine! Paired with Ford's innovative EcoBoost engine, our ROUSH Cold Air Kit feeds cooler, denser air to the Turbo, increasing potential power output by up to 29 RWHP and 27 ft-lbs. RTWQ! Our kit is 74% less restrictive than the stock system at peak horsepower. Best of all, this system will not void your factory warranty! The filter is washable, re-usable and requires no oiling.The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost

The all-new 2015-2017 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air-intake than the standard stock air box. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application ensuring MAF signal performance matches factory settings. As a straight bolt on, with no tune, it's possible to see gains of 10hp and 8 lb-ft of torque, a noticeable increase. The filter requires no oiling and is easily washable for re-use.Included in the kit is the air filter with clamp, injection-molded lower air box/tray with installed EPDM foam hood seal, Blow Molded clean air tubes and all required mounting hardware. The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.This Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang EcoBoost 2015-2017 Ford Mustang EcoBoost Premium 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

Looking to obtain the iconic ROUSH exhaust sound for your F-150, but want a more OEM look?Some great quality features of this exhaust are:The muffler, inlet, outlet, and y-pipes are made from high-quality 409 stainless steel to prevent corrosion and enhance durability.The tips are constructed of high-quality 304 stainless steel for superior corrosion resistance and durability, and are embossed with the ROUSH logo, which exit out of the side of the vehicle.The piping in this system is 3in diameter, which is all mandrel-bent to promote consistent flow throughout.This exhaust kit is designed to work on all cab and bed configurations for the 2011-2014 5.0L, 6.2L (including SVT Raptor), & 3.5L F-150s.This Part Fits: Year Make Model Submodel 2010-2014 Ford F-150 FX2 2010-2014 Ford F-150 FX4 2010-2012 Ford F-150 Harley-Davidson Edition 2010-2014 Ford F-150 King Ranch 2010-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2010-2014 Ford F-150 Platinum 2010-2014 Ford F-150 STX 2010-2014 Ford F-150 SVT Raptor 2010-2014 Ford F-150 XL 2010-2014 Ford F-150 XLT

This F-150 Cold Air Intake fits the 2012-2014 F-150 3.5L-V6 EcoBoost Engine. Key features of the ROUSH 3.5L EcoBoost F-150 Cold Air Intake kit include: Easy installation in less than one hour and requires NO drilling or cutting, a washable reusable premium high flow air filter. Also included is an injection molded mass air pressure tube and air box lid for maximum air flow efficiency, designed and manufactured for superior structural durability.Please note that this kit is designed for the 2012-2014 model year 3.5L EcoBoost F-150's and will NOT work with the 2011 model year (different MAP sensors).This Part Fits: Year Make Model Submodel 2012-2014 Ford F-150 FX2 2012-2014 Ford F-150 FX4 2012-2014 Ford F-150 King Ranch 2012-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2012-2014 Ford F-150 Platinum 2012-2014 Ford F-150 XL 2012-2014 Ford F-150 XLT

This belt is a replacement belt for your 2011-2014 ROUSHcharged F-150 6.2L. Length is 3,200 millimeters.6k Rib BeltThis Part Fits: Year Make Model Submodel 2011-2013 Ford F-150 FX2 2011-2013 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2013 Ford F-150 King Ranch 2011-2013 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013 Ford F-150 Limited 2011-2013 Ford F-150 Platinum 2011-2013 Ford F-150 STX 2011-2013 Ford F-150 SVT Raptor 2011-2013 Ford F-150 XL 2011-2013 Ford F-150 XLT

Fits the 2011-2014 F-150 5.0L P2 SC.Fits the 2015 P1 & P2 F-150 5.0L SC.Fits the 2011-2014 TVS P1, P2, & P3 Mustang. Length is 2,085 millimeters.6k Rib Belt.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT 2011-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2011-2014 Ford Mustang GT 2011-2014 Ford Mustang Shelby GT500

This F-150 Supercharger Kit delivers 590 HP and 590 LB/FT of torque to the 2011-2014 Ford F-150 6.2L-2v V8 powertrain, an increase of 179 HP and 156 FT/LB over stock.The ROUSH 2011-2014 6.2L F-150 Phase 2 Calibrated Supercharger Kit is part of the TVS line of superchargers developed by ROUSH that have raised the bar for performance and reliability. This is the same line that has been used and proven for years in ROUSH-built vehicles. The ROUSH R2300 supercharger features Eaton's new TVS rotating assembly that delivers more power in a smaller package for uncompromising performance. The ROUSH R2300 TVS supercharger is a roots-type, positive displacement supercharger that features twin four-lobe rotors that are twisted 160-degrees. This technology greatly enhance thermal efficiency, deliver higher volumetric capacity, enable higher operating speeds, creates a smoother, more efficient flow of air into the engine and has improved noise and vibration characteristics.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

Add true race-inspired styling to your 2013-2014 Ford Mustang with ROUSH's Rear Side Splitter kit. The rear splitter kit includes both the left and right sides of your Mustang. Each splitter fits underneath the rear valance to create an aggressive styling line with the road.Our splitter kit is made from high-strength TPO for long lasting durability. The plastic is molded with high-pressure injection, the same process used by the automotive manufactures. These splitters come unpainted and featuring a black stipple finished to be more resistant to impact from rocks while driving. Installation takes only minutes, and there is no trimming needed, as there would be with our competitors products. All required parts are included.This Part Fits: Year Make Model Submodel 2013-2014 Ford Mustang Base 2013 Ford Mustang Boss 302 2013-2014 Ford Mustang GT 2013-2014 Ford Mustang Shelby GT500