RockJocks forged narrow Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.365 in. mounting width offset ball with a .562 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged narrow Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.

1 1/4 in.-12 left hand thread jam nut for use on RockJock Johnny Joints(R) with treaded shanks, or in any other application that would need a 1 1/4 in. jam nut. Gold zinc plated, sold each.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 3.280 in. mounting width ball with a .718 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.

1 1/4 in.-12 right hand thread jam nut for use on RockJock Johnny Joints(R) with treaded shanks, or in any other application that would need a 1 1/4 in. jam nut. Gold zinc plated, sold each.

Custom machined, round, right hand thread, weld-in bung for use with forged Johnny Joint(R) rod ends or any other 1 1/4 in.-12 thread rod end. Designed to fit into a tube with a 1 1/2 in. i.d.

Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint(R) rod ends or any other 1 1/4 in.-12 thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/2 in. i.d.

Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint(R) rod ends or any other 1 1/4 in.-12 thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/2 in. i.d.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.812 in. mounting width ball with a .750 in. thru bolt hole. Finished in gold zinc plating.

RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.440 in. mounting width ball with a .570 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 2.812 in. mounting width ball with a .750 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.

1 in.-14 right hand thread jam nut for use on RockJock Johnny Joints(R) with treaded shanks, or in any other application that would need a 1 in. jam nut. Gold zinc plated, sold each.

Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint(R) rod ends or any other 1 in.-14 thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/4 in. i.d.

Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint(R) rod ends or any other 1 in.-14 thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/4 in. i.d.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.625 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.812 in. mounting width ball with a .750 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.

RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 2 in. mounting width ball with a .4375 in. thru bolt hole. Finished in gold zinc plating.

Rebuild kit for the 2 in. RockJock(R) Johnny Joint(R) rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint(R) tool makes this rebuild job a lot easier!

Rebuild kit for the 2 in. RockJock(R) narrow style Johnny Joint(R) rod ends includes 1 urethane bushing, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint(R) tool makes this rebuild job a lot easier!

RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball.The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 left hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.

RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.

RockJocks narrow forged Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 2 in. mounting width ball with a .500 in. thru bolt hole. Finished in gold zinc plating.

This is the specially machined Johnny Joint(R) rod end out of our CE-9102K front end housing kit. This joints outer shell is machined to 1.795 in. o.d. with a flanged edge and is designed to be driven into the bushing bore on the gear case casting side of the TJ/LJ/XJ/MJ Dana 30 or 44 frontend housings to replace the stock rubber bushing. Features a 1/2 in. thru bolt hole and includes a 1/2 in. greasable bolt.This Part Fits: Year Make Model Submodel 1984-1993 Jeep Cherokee Base 1991-1992 Jeep Cherokee Briarwood 1985-1988 Jeep Cherokee Chief 1996,1998-2001 Jeep Cherokee Classic 1993-1997 Jeep Cherokee Country 1985-1992 Jeep Cherokee Laredo 1987-1992,1998-2001 Jeep Cherokee Limited 1985-1990 Jeep Cherokee Pioneer 1994-2001 Jeep Cherokee SE 1989-2001 Jeep Cherokee Sport 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Wrangler 65th Anniversary Edition 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2003-2017 Jeep Wrangler Rubicon 1997-2004,2007-2017 Jeep Wrangler Sahara 1997-2006 Jeep Wrangler SE 1997-2006,2010-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2004-2006 Jeep Wrangler Unlimited 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2005-2017 Jeep Wrangler Unlimited Rubicon 2007-2017 Jeep Wrangler Unlimited Sahara 2010-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2002-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

This is the specially machined Johnny Joint(R) rod end out of our CE-9102K front end housing kit. This joints outer shell is machined to 1.795 in. o.d. with a flanged edge and is designed to be driven into the bushing bore on the gear case casting side of the TJ/LJ/XJ/MJ Dana 30 or 44 frontend housings to replace the stock rubber bushing. Features a 7/16 in. thru bolt hole and includes a 7/16 in. greasable bolt.This Part Fits: Year Make Model Submodel 1984-1993 Jeep Cherokee Base 1991-1992 Jeep Cherokee Briarwood 1985-1988 Jeep Cherokee Chief 1996,1998-2001 Jeep Cherokee Classic 1993-1997 Jeep Cherokee Country 1985-1992 Jeep Cherokee Laredo 1987-1992,1998-2001 Jeep Cherokee Limited 1985-1990 Jeep Cherokee Pioneer 1994-2001 Jeep Cherokee SE 1989-2001 Jeep Cherokee Sport 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Wrangler 65th Anniversary Edition 2003-2006 Jeep Wrangler Rubicon 1997-2004 Jeep Wrangler Sahara 1997-2006 Jeep Wrangler SE 1997-2006 Jeep Wrangler Sport 2004-2006 Jeep Wrangler Unlimited 2005-2006 Jeep Wrangler Unlimited Rubicon 2002-2006 Jeep Wrangler X

RockJocks greaseable bolts include the grade 8 zerk fitted bolt, 2 flat washers and a stover nut. We use these bolts to grease our Johnny Joint(R) rod ends, but they can be used in numerous applications. This bolt is 1/2 in.-20 thread x 3 1/2 in. long.

RockJocks greaseable bolts include the grade 8 zerk fitted bolt, 2 flat washers and a stover nut. We use these bolts to grease our Johnny Joint(R) rod ends, but they can be used in numerous applications. This bolt is 7/16 in.-20 thread x 3 1/4 in. long.

RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 in. o.d. and features a 2 in. mounting width and a .500 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.

RockJocks weld-on Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 in. o.d. and features a 2 in. mounting width and a .4375 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.

This tool from RockJock is designed to make the assembly and disassembly of our popular 2 ½' Johnny Joint(R) rod ends simple! Tool can be used either in a bench vise, or it can also be used on the vehicle for repairs and rebuilds of Johnny Joints(R). Construction is CNC machined heat treated steel components, ½'-13 all-thread, and premium thrust bearings. Tool is completely rebuildable, and all parts are available through RockJock. Tools sold each.