PRP Polaris RZR Seats Harness Pass-Through Bezel
$19.99
$21.99
This harness pass-through is needed if you want to use the OEM Polaris seats with a 4 or 5 point harness. It creates a slot in the headrest that allows the shoulder straps to run through the headrest, rather than around it.The two piece plastic insert is fairly east to install, and includes instructions and a cut template for a perfect fit every time. Sold Individually, one required per seat.
Add a Harness Slot to your Stock Polaris RZR Seat
Fits Polaris General, RZR 900, XP 1000, Turbo, Turbo S, and RS1 OEM Seats
Allows a 4 or 5 Point Harness the Pass-Through for OEM Seat, Rather Than Around the Headrest
Instructions and Template Included
Sold Individually, One Required Per Seat
Attributes:
GTIN: 00603784098067
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: China
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 12.0 x 6.0 x 6.0 inches
Weight: 1.0 lb
PRP Seat Belt Latch/Link Buckle
$17.99
$19.99
Latch and Link style Buckle. Commonly used on Off-Road Harnesses. Also used to secure aftermarket or race window nets to the frame of the vehicle. Powdercoated Black.
Latch and Link style Buckle
Used on off-road harnesses
Used to secure window nets to a vehicle.
Powdercoated Black
Attributes:
GTIN: 00603784105062
Brand Name: PRP
Color Code: 0
Variant: Color: Raw
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.0 x 6.0 x 6.0 inches
Weight: 3.0 lb
PRP Eye Bolt Black
$5.99
Clip in tabs are a must have for vehicles that have the shoulder portion of their harnesses bolted in, rather than wrapped around a harness bar.If you need to take the seat out for any reason (to clean, or access the battery) clip-ins make it quick and easy to disconnect the harness. Versus if you have a standard tab, where you will need to use tools to remove the harness. These Clip-in Kits are only designed for the shoulder belts of the harness, since the lap belt tabs are sewn in, and not easily switched out. If you would like a lap belt section with clip-in tabs - see our Latch and Link Lap Belt or 5.3 Custom Harness. Kit includes: one eye bolt, one large washer, one lock washer, one nut.
Hardware to Convert Your Standard Harness Tabs to Clip-In Style
PRP Clip-in Tabs Recommended
Sold Individually (Each Harness Needs Two for Lapbelts, and Two for Shoulder Belts)
Attributes:
GTIN: 00603784103792
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 2.0 inches
Weight: 1.0 lb
PRP Crotch Belt - 5th Point Only
$20.99
$22.99
Perfect if you already own a 4 Point Harness, but want to add a 5th point connection. Only works with latch and link buckle systems. Not SFI Approved. If you need a SFI 16.1 certified harness, check out PRPs 5.3 Harness.
Add or Replace Your 5th Point, Anti-Sub Strap
Sub Strap Allows You to Turn a 4 Point Harness into a 5 Point
Sold Individually
Attributes:
GTIN: 00603784102771
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.0 x 4.0 x 2.0 inches
Weight: 1.0 lb
PRP Harness Clip-In / Eye Bolt Kit
$10.99
$11.99
Clip in tabs are a must have for vehicles that have the shoulder portion of their harnesses bolted in, rather than wrapped around a harness bar.If you need to take the seat out for any reason (to clean, or access the battery) clip-ins make it quick and easy to disconnect the harness. Versus if you have a standard tab, where you will need to use tools to remove the harness.These Clip-in Kits are only designed for the shoulder belts of the harness, since the lap belt tabs are sewn in, and not easily switched out.If you would like a lap belt section with clip-in tabs - see our Latch and Link Lap Belt or 5.3 Custom Harness. Kit includes: one clip-in tab, one eye bolt, one large washer, one lock washer, one nut (two kits required per harness).
A Complete Eye Bolt Kit and Clip-In Tab for Mounting your Harnesses
Perfect for Vehicles Which Require the Harness Shoulders to be Bolted In (Like the Can-Am X3 and Polaris Pro XP)
Allows the Harness to be Easily Removed (To Access the Battery)
Only Work on the Shoulder Belts of a Harness (Lap Belts Have Sewn-In Tabs)
Kit Includes One Clip-In Tab and One Bolt (Two Kits are Required per Harness)
Attributes:
GTIN: 00603784101071
Brand Name: PRP
Color Code: EB
Variant: Color: Black; Packaging: Single
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 2.0 inches
Weight: 2.0 lb
PRP Clip-In Harness Tab- Black
$8.99
$9.99
Clip in tabs are a must have for vehicles that have the shoulder portion of their harnesses bolted in, rather than wrapped around a harness bar.If you need to take the seat out for any reason (to clean, or access the battery) clip-ins make it quick and easy to disconnect the harness. Versus if you have a standard tab, where you will need to use tools to remove the harness. These Clip-in Kits are only designed for the shoulder belts of the harness, since the lap belt tabs are sewn in, and not easily switched out.If you would like a lap belt section with clip-in tabs - see our Latch and Link Lap Belt or 5.3 Custom Harness. Kit includes one clip-in tab.
Hardware to Convert your Standard Harness Tabs to Clip-In Style
PRP Eye Bolt Kit Recommended
Sold Individually (Two Required Per Harness for Shoulder Belts)
Attributes:
GTIN: 00603784103785
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 2.0 inches
Weight: 1.0 lb
PRP Belt Minders (Pair)
$13.99
$15.00
When your belts are wrapped around the harness bar, they have a tendency to slide all over. PRP belt minders keep both shoulder belts together on the bar. It stops them from sliding apart, and provides better safety in case of an accident. The belt minder should be located behind the back of the seat (in-between the seat and the harness bar). Easiest to install by unwrapping each shoulder belt from the bar, running it through the minder, and then reattaching the shoulder belt to the bar.
PRP Belt Minders Keep Your Harness Straps Close Together and Keep You Safer
Sold as a Pair
Attributes:
GTIN: 00603784102764
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 12.0 x 4.0 x 2.0 inches
Weight: 1.0 lb
PRP Bolt-In Harness Tab- Black
$5.99
A standard bolt in tab for a 4 pt, 5 pt, or 6 pt harness. Can be used on 2 or 3 inch harness webbing. Made from steel - anodized black.
Standard Harness Tab
Bolt in style tab
Sold Individually (two required per harness for shoulder belts)
Fits 2 in - 3 in strap webbing
Attributes:
GTIN: 00669372001222
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 2.0 inches
Weight: 1.0 lb
PRP Arm Restraint
$20.99
$22.99
No matter how experienced a rider is, anything can happen in a roll-over. This armrestraint attaches to your safety harness and ensures your armwill not leave the vehicle. Easy release allows quick entry and exit from drivers compartment.
Keep Your Window-Side Arm from Exiting the Vehicle in an Accident
Wraps Around your Wrist or Bicep and Secures to your Harnesses Latch
Releases Quickly When Unlatching Harness
Works for Riders of All Ages
Attributes:
GTIN: 00603784102740
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.0 x 2.0 x 1.0 inches
Weight: 1.0 lb
PRP 3In. Sternum Strap
$20.99
$22.99
If you are ever involved in an accident, the sternum strap is there to prevent the shoulder belts from slipping off your shoulders. If it is a extremely hard crash, the sternum strap is designed to break, rather than cause injury to the chest/neck.
Removeable Sternum Strap for your Harness
Keeps the Shoulder Pads Together, Stop the Belts from Slipping off your Shoulders
Two Sizes Available
1 in. Sternum Strap for 2 in. Harnesses
2 in. Sternum Strap for 3 in. Harnesses
Sold Individually
Attributes:
GTIN: 00603784105017
Brand Name: PRP
Color Code: 3
Variant: Harness Width: 2 inch; Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 2.0 inches
Weight: 1.0 lb
PRP 3In. 3 Bar Adjuster
$4.99
Use to secure harness belts once they are wrapped around a harness bar. Fits 3 inch wide belt webbing. Powdercoated Black. Sold Individually.
Use to secure harness belts once they are wrapped around a harness bar
Fits 3 in wide belt webbing
Powdercoated Black
Attributes:
GTIN: 00603784105024
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 1.0 inches
Weight: 1.0 lb
PRP 2In. Sternum Strap
$20.99
$22.99
If you are ever involved in an accident, the sternum strap is there to prevent the shoulder belts from slipping off your shoulders. If it is a extremely hard crash, the sternum strap is designed to break, rather than cause injury to the chest/neck.
Removeable Sternum Strap for your Harness
Keeps the Shoulder Pads Together, Stop the Belts from Slipping off your Shoulders
Two Sizes Available
1 in. Sternum Strap for 2 in. Harnesses
2 in. Sternum Strap for 3 in. Harnesses
Sold Individually
Attributes:
GTIN: 00603784105031
Brand Name: PRP
Color Code: 2
Variant: Harness Width: 1 inch; Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 2.0 inches
Weight: 1.0 lb
PRP 2In. 3 Bar Adjuster
$3.99
Use to secure harness belts once they are wrapped around a harness bar. Fits 2 inch wide belt webbing. Powdercoated Black. Sold Individually.
Use to secure harness belts once they are wrapped around a harness bar
Fits 2 in wide belt webbing
Powdercoated Black
Attributes:
GTIN: 00603784105055
Brand Name: PRP
Color Code: 0
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 1.0 inches
Weight: 1.0 lb
PRP Polaris RZR Cargo Hook (Each)
$14.99
$15.99
PRP Cargo Bed Hooks are designed to fit any Polaris RZR or Ranger using the existing molding holes. These are a great way to add a few more tie-down options and are built to handle the lightweight cargo you put in your UTV. The bushings feature large molded washer lips which will allow you to mount the hook on top of one of the molded holes in the bed, similar to the park and ride system that Polaris offers. Sold individually.
FITMENT: Mounts on all Polaris RZR and Ranger Models
Offers Additional Tie-Down Points for Securing Cargo such as Coolers, Gas Cans and More
Uses Existing Holes in the Cargo Area
Grade 8 Eye Bolt with Nut and Lock Washer
Two Molded Stiff Molded Delrin Bushings that will Not Squeak on Rough Terrain and Firmly Lock into Place
Solid and Secure for Peace of Mind
Matte Black finish
Installs Easily
Packaged Individually; Purchase Multiple Packs for More Tie-Down Options
Attributes:
GTIN: 00603784098425
Brand Name: PRP
Color Code: 1
FITMENT: Mounts on all Polaris RZR and Ranger Models
Variant: Color: Matte Black
Warranty: 1 year
Extended Information:
Country of Origin: United States
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 12.0 x 7.0 x 1.0 inches
Weight: 1.0 lb
PRP Holy Moly Handle
$20.99
$22.99
A comfortable handle that wraps around bars up to 3 in. diameter with three strong hook-and-loop fasteners.
Fits Roll Bars up to 3 inches in Diameter
Tough PVC Handle
Three strong Hook and Loop Straps
Rubberized Mesh Grips the Bar and Keeps the Handle in Place
Attributes:
GTIN: 00603784102139
Brand Name: PRP
Color Code: 00
Variant: Color: Black
Warranty: 1 year
Extended Information:
Country of Origin: Taiwan
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.0 x 6.0 x 6.0 inches
Weight: 1.0 lb
PRP Polaris General/RZR S900/900 Trail/XP1000/Turbo/Turbo S/RS1 Seat Adapter Tubes
$10.00
Use these square tube mounts to adapt your PRP Seat to your Polaris General or RZR. The tubes attach to the stock slider underneath the seat, and allow you to adapt the seat base to the bottom of your PRP UTV Seat. These are used for the Front Seats, Rear Seats, and with our Rear Benches. Includes 2x Square tubes (that fit the one seat, or one side of a bench). Only fits PRP Seats with 1000 Style Seat frames.
Mount PRP seats into your Polaris General or RZR
Works for 2015+ Polaris General, RZR S900, 900 Trail, XP1000, Turbo, Turbo S, RS1
Includes 2x Adapter Tubes (That fit on one seat)
Only fits PRP Seats with 1000 Style Seat frames
Used to install PRP Front Seats, Rear Seat, and Benches
Attributes:
GTIN: 00669372002557
Brand Name: PRP
Color Code: 00
Warranty: 1 year
Extended Information:
Country of Origin: United States
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 14.0 x 4.0 x 4.0 inches
Weight: 2.0 lb
PRP 2018+ Textron Wildcat XX Seat Mount Kit
$19.99
$21.99
Use these square tube mounts to adapt your PRP Seat to your 2018 Textron Wildcat XX. Use the tubes to attach to the stock slider on the driver side. Includes 2x Square tubes (that fit the driver seat), and hardware for both seats. Only fits PRP Seats with 900 style seat frames.
Allows You to Adapt Your PRP Seat to a 2018 Textron Wildcat XX
Includes 2x Adapter Tubes (That Fit on the Driver Seat), and Hardware for Both Seats
Only Fits PRP Seats with 900 Style Seat Frames
Includes Hardware for Both Front Driver and Passenger Side
Attributes:
GTIN: 00603784106984
Brand Name: PRP
Color Code: 00
Variant: Position: Front
Warranty: 1 year
Extended Information:
Country of Origin: United States
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 4.0 x 4.0 x 20.0 inches
Weight: 1.0 lb
PRP Seat Mounting Tabs/Universal
$4.99
$5.49
Stamped, heat rolled tabs for mounting your PRP seats to any chassis.
Tabs for mounting your PRP seats to your custom chasis
3/16 in hot rolled steel
Set mounts at 14 in wide by 18 in deep for standard width PRP seats
Attributes:
GTIN: 00603784104867
Brand Name: PRP
Color Code: 00
Warranty: 1 year
Extended Information:
Country of Origin: United States
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.0 x 10.0 x 1.0 inches
Weight: 1.0 lb
PRP Seat Mount Spacer Kit for Extra Wide Seats
$19.99
$21.99
For use with all of PRPs aftermarket seat mounts, the Extra Wide Spacer Kit provides the hardware necessary to mount your extra wide PRP seat.
Adapt your extra wide PRP seats to any PRP seat mount (check the available space in your vehicle first)
Includes 4 extra long bolts, washers, nuts, and 4 reinforced steel sleeves
One kit needed per seat
Attributes:
GTIN: 00603784097947
Brand Name: PRP
Warranty: 1 year
Color Code: 00
Extended Information:
Country of Origin: United States
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packing Information:
Quantity of Each: 1
Package UOM: EA
Dimension: 6.0 x 10.0 x 1.0 inches
Weight: 1.0 lb