The 2019+ Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet, and it deserves a cooling system that's equally capable. That's why Mishimoto has developed a performance intercooler kit that's as capable as the Ranger itself. This Mishimoto performance intercooler kit includes our bar-and-plate intercooler and mandrel-bent aluminum intercooler pipes. The intercooler's core is designed specifically to meet the Ranger's needs and is TIG-welded to durable cast-aluminum end tanks. The bar-and-plate core gives our intercooler increased durability against heat, pressure, and debris on the road or trail. The Mishimoto intercooler is also 24-percent less restrictive than stock, with a 46-percent increase in core volume, and a 49-percent increase in fin surface area over for even more efficient cooling. Our performance intercooler pipes are constructed from mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and more power potential. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy. This intercooler kit produces dyno-proven gains of 13.6 whp and 13.9 lb-ft of torque, all while maintaining less pressure drop than the stock intercooler system. This Mishimoto 2019+ Ford Ranger 2.3L EcoBoost Performance Intercooler Kit includes Mishimoto Silicone Boots with DuraCoreâ„¢ technology and high-torque worm gear clamps for consistent holding power. Bungs on the intercooler end tank and cold-side intercooler pipe can be drilled and tapped for a boost sensor or water-meth injection. The CNC-machined quick-disconnect inlet and outlet make installation a breeze. Like all our Ford Ranger parts, this 2019+ Ford Ranger Performance Intercooler kit is backed by our Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2022 Ford Ranger Lariat 2019-2022 Ford Ranger XL 2019-2022 Ford Ranger XLT

The 2019+ Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet, and it deserves a cooling system that's equally capable. That's why Mishimoto has developed a performance intercooler kit that's as capable as the Ranger itself. This Mishimoto performance intercooler kit includes our bar-and-plate intercooler and mandrel-bent aluminum intercooler pipes. The intercooler's core is designed specifically to meet the Ranger's needs and is TIG-welded to durable cast-aluminum end tanks. The bar-and-plate core gives our intercooler increased durability against heat, pressure, and debris on the road or trail. The Mishimoto intercooler is also 24-percent less restrictive than stock, with a 46-percent increase in core volume, and a 49-percent increase in fin surface area over for even more efficient cooling. Our performance intercooler pipes are constructed from mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and more power potential. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy. This intercooler kit produces dyno-proven gains of 13.6 whp and 13.9 lb-ft of torque, all while maintaining less pressure drop than the stock intercooler system. This Mishimoto 2019+ Ford Ranger 2.3L EcoBoost Performance Intercooler Kit includes Mishimoto Silicone Boots with DuraCoreâ„¢ technology and high-torque worm gear clamps for consistent holding power. Bungs on the intercooler end tank and cold-side intercooler pipe can be drilled and tapped for a boost sensor or water-meth injection. The CNC-machined quick-disconnect inlet and outlet make installation a breeze. Like all our Ford Ranger parts, this 2019+ Ford Ranger Performance Intercooler kit is backed by our Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2022 Ford Ranger Lariat 2019-2022 Ford Ranger XL 2019-2022 Ford Ranger XLT

Help your 2020+ Toyota GR Supra 3.0L stay cool with the Mishimoto Performance Aluminum Radiator kit! The latest Supra has taken over the role of being an icon for the tuning community, but even being backed by BMW, high coolant temperatures can still bring your track day or canyon carve to a screeching halt. It’s a tag-team effort to keep the A90 Supra cool, and we here at Mishimoto made sure to overhaul both the primary and auxiliary radiators for optimal cooling performance. All three radiators were revised from the ground up, starting with the construction. We ditched the slim stock core and plastic end tanks in favor of a full aluminum, TIG-welded construction, sure to stand up to the abuse from the street, track, or drag strip. The primary radiator features a 1.65" thick core, not only increasing fluid capacity but also the core volume by 31-percent for improved heat dissipation. In addition, the updated tube-and-fin design employed on this radiator also expands the external fin surface area by 57-percent to further improve the transfer of heat. Finally, to ensure a rock-solid core, we also utilized strutted tubes on our primary radiator for a core that resists chassis flex, preventing cracks or leaks in your cooling system. The auxiliary radiators also received a similar treatment and have been revamped with a full aluminum construction. Both cores measure in at 1.57" thick with a 30-percent boost in core volume and 180-percent increase in external fin surface area for maximum cooling properties. All three cores are available in a polished finish and include the Mishimoto Lifetime Warranty for a worry-free installation.This Part Fits: Year Make Model Submodel 2020-2021 BMW Z4 sDrive30i 2021-2022 Toyota GR Supra A91 Edition 2020-2022 Toyota GR Supra Base 2020 Toyota GR Supra Launch Edition 2020-2022 Toyota GR Supra Premium

Cool down those charge air temperatures with the Mishimoto direct-fit performance intercooler and pipe kit for the 2011-2014 Ford F-150 EcoBoost. The small, factory intercooler sits in the bottom part of a spacious and unconventionally shaped cavity behind the front bumper, which means There's a lot of wasted space there that could be used for cooling improvements. That?s why the Mishimoto intercooler has been cleverly engineered with a unique angled design to take full advantage of the space for maximum performance. This intercooler boasts an 88-percent increase in core size, 66-percent increase in internal core volume, and 40-percent increase in external fin surface area. The Mishimoto intercooler lowers intake temperatures by 50?F (28?C) compared to the factory part. But of course, no intercooler is complete without a set of pipes to complement it. This kit also includes Mishimoto 2011?2014 F?150 EcoBoost Intercooler Pipes which are an ideal upgrade in reliability and performance. Accompanied by silicone couplers with DuraCore? technology, Mishimoto's F?150 EcoBoost intercooler piping is engineered to eliminate restrictive bends while improving durability and airflow. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. These pipes alone have been dyno proven to provide your truck with up to 15 more horsepower and 21 Ft/lbs more torque.Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler and pipe kit again.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

Cool down those charge air temperatures with the Mishimoto direct-fit performance intercooler and pipe kit for the 2011-2014 Ford F-150 EcoBoost. The small, factory intercooler sits in the bottom part of a spacious and unconventionally shaped cavity behind the front bumper, which means There's a lot of wasted space there that could be used for cooling improvements. That's why the Mishimoto intercooler has been cleverly engineered with a unique angled design to take full advantage of the space for maximum performance. This intercooler boasts an 88-percent increase in core size, 66-percent increase in internal core volume, and 40-percent increase in external fin surface area. The Mishimoto intercooler lowers intake temperatures by 50F (28C) compared to the factory part. But of course, no intercooler is complete without a set of pipes to complement it. This kit also includes Mishimoto 2011-2014 F-150 EcoBoost Intercooler Pipes which are an ideal upgrade in reliability and performance. Accompanied by silicone couplers with DuraCore technology, Mishimoto's F-150 EcoBoost intercooler piping is engineered to eliminate restrictive bends while improving durability and airflow. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. These pipes alone have been dyno proven to provide your truck with up to 15 more horsepower and 21 Ft/lbs more torque. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler and pipe kit again.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

Cool down those charge air temperatures with the Mishimoto direct-fit performance intercooler kit for the 2011-2014 Ford F-150 EcoBoost. The small, factory intercooler sits in the bottom part of spacious, but unconventionally shaped cavity behind the front bumper -- There's a lot of wasted space there that could be used for cooling improvements! That's why the Mishimoto intercooler has been cleverly engineered to feature a unique angled design to take full advantage of the space for maximum performance, boasting an 88-percent increase in core size, a 66-percent increase in internal core volume, and a 40-percent increase in external fin surface area. Our all-aluminum, TIG-welded core is a tough and durable as the rest of your truck, and incorporates an NPT-threaded bung on the bottom to help deal with the condensation that the 2011-2014 F-150 is notorious for. Also included is a CNC bypass bung for 2011-2012 trucks, and a set of air diversion plates to guide ambient air directly through the core for the best performance possible. Speaking of performance, this intercooler has been dyno-tested for maximum gains using both the stock tune and a specialized tune to optimize the ECU to the improved cooling performance. The Mishimoto intercooler lowers intake temperatures by 50 F (10 C) compared to the factory part. Available in your choice of Stealth Black or Sleek Silver, every 2011-2014 F-150 EcoBoost intercooler fits with both the stock intercooler pipes and the upcoming Mishimoto performance hot and cold pipes, and each intercooler ships with the Mishimoto lifetime warranty.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

Cool down those charge air temperatures with the Mishimoto direct-fit performance intercooler kit for the 2011-2014 Ford F-150 EcoBoost. The small, factory intercooler sits in the bottom part of spacious, but unconventionally shaped cavity behind the front bumper -- There's a lot of wasted space there that could be used for cooling improvements! That's why the Mishimoto intercooler has been cleverly engineered to feature a unique angled design to take full advantage of the space for maximum performance, boasting an 88-percent increase in core size, a 66-percent increase in internal core volume, and a 40-percent increase in external fin surface area. Our all-aluminum, TIG-welded core is a tough and durable as the rest of your truck, and incorporates an NPT-threaded bung on the bottom to help deal with the condensation that the 2011-2014 F-150 is notorious for. Also included is a CNC bypass bung for 2011-2012 trucks, and a set of air diversion plates to guide ambient air directly through the core for the best performance possible. Speaking of performance, this intercooler has been dyno-tested for maximum gains using both the stock tune and a specialized tune to optimize the ECU to the improved cooling performance. The Mishimoto intercooler lowers intake temperatures by 50 F (10 C) compared to the factory part. Available in your choice of Stealth Black or Sleek Silver, every 2011-2014 F-150 EcoBoost intercooler fits with both the stock intercooler pipes and the upcoming Mishimoto performance hot and cold pipes, and each intercooler ships with the Mishimoto lifetime warranty.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

Cool down those charge air temperatures with the Mishimoto direct-fit performance intercooler and pipe kit for the 2011-2014 Ford F-150 EcoBoost. The small, factory intercooler sits in the bottom part of a spacious and unconventionally shaped cavity behind the front bumper, which means There's a lot of wasted space there that could be used for cooling improvements. That?s why the Mishimoto intercooler has been cleverly engineered with a unique angled design to take full advantage of the space for maximum performance. This intercooler boasts an 88-percent increase in core size, 66-percent increase in internal core volume, and 40-percent increase in external fin surface area. The Mishimoto intercooler lowers intake temperatures by 50?F (28?C) compared to the factory part. But of course, no intercooler is complete without a set of pipes to complement it. This kit also includes Mishimoto 2011?2014 F?150 EcoBoost Intercooler Pipes which are an ideal upgrade in reliability and performance. Accompanied by silicone couplers with DuraCore? technology, Mishimoto's F?150 EcoBoost intercooler piping is engineered to eliminate restrictive bends while improving durability and airflow. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. These pipes alone have been dyno proven to provide your truck with up to 15 more horsepower and 21 Ft/lbs more torque.Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler and pipe kit again.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

Cool down those charge air temperatures with the Mishimoto direct-fit performance intercooler and pipe kit for the 2011-2014 Ford F-150 EcoBoost. The small, factory intercooler sits in the bottom part of a spacious and unconventionally shaped cavity behind the front bumper, which means There's a lot of wasted space there that could be used for cooling improvements. That?s why the Mishimoto intercooler has been cleverly engineered with a unique angled design to take full advantage of the space for maximum performance. This intercooler boasts an 88-percent increase in core size, 66-percent increase in internal core volume, and 40-percent increase in external fin surface area. The Mishimoto intercooler lowers intake temperatures by 50?F (28?C) compared to the factory part. But of course, no intercooler is complete without a set of pipes to complement it. This kit also includes Mishimoto 2011?2014 F?150 EcoBoost Intercooler Pipes which are an ideal upgrade in reliability and performance. Accompanied by silicone couplers with DuraCore? technology, Mishimoto's F?150 EcoBoost intercooler piping is engineered to eliminate restrictive bends while improving durability and airflow. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. These pipes alone have been dyno proven to provide your truck with up to 15 more horsepower and 21 Ft/lbs more torque.Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler and pipe kit again.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

The Dodge Cummins straight-six is well known for its smooth power delivery and engine longevity. Mishimoto has released an intercooler for the 2013-2018 Dodge Ram 6.7L Cummins that is built to last, just like your truck. The Mishimoto Cummins intercooler is manufactured with robust cast aluminum end tanks and a dense bar-and-plate core. Our engineers developed an intercooler with increased core volume that can support substantial boost pressures and lower EGTs in your stock or modified truck. The Mishimoto Cummins performance intercooler features larger-than-factory intercooler outlets for increased flow. Included with this intercooler are two silicone boots with DuraCore technology and our signature Constant Tension T-bolt Clamps for consistent and reliable holding power. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. Save time and money by upgrading to the full Mishimoto 2013-2018 Dodge Ram 6.7L Cummins intercooler and piping kit, which pairs this intercooler with the Mishimoto 2013-2018 Dodge Ram 6.7L Cummins pipe and boot kit, at a special discounted price. Whether your Cummins is stock or modified, trust Mishimoto and our line of Cummins performance parts to keep your Dodge cool. This Cummins performance intercooler is offered in Sleek Silver or Stealth Black, like all of our Cummins performance parts, and comes backed by the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013-2018 Ram 2500 Power Wagon 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

The Dodge Cummins straight-six is well known for its smooth power delivery and engine longevity. Mishimoto has released an intercooler for the 2013-2016 Dodge Ram 6.7L Cummins that is built to last, just like your truck. The Mishimoto Cummins intercooler is manufactured with robust cast aluminum end tanks and a dense bar-and-plate core. Our engineers developed an intercooler with increased core volume that can support substantial boost pressures and lower EGTs in your stock or modified truck. The Mishimoto Cummins performance intercooler features larger-than-factory intercooler outlets for increased flow. Included with this intercooler are two silicone boots with DuraCore technology and our signature Constant Tension T-bolt Clamps for consistent and reliable holding power. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. Save time and money by upgrading to the full Mishimoto 2013-2016 Dodge Ram 6.7L Cummins intercooler and piping kit, which pairs this intercooler with the Mishimoto 2013-2016 Dodge Ram 6.7L Cummins pipe and boot kit, at a special discounted price. Whether your Cummins is stock or modified, trust Mishimoto and our line of Cummins performance parts to keep your Dodge cool. This Cummins performance intercooler is offered in Sleek Silver or Stealth Black, like all of our Cummins performance parts, and comes backed by the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013 Ram 2500 Power Wagon 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

Mishimoto has released a performance intercooler kit for the 2013-2018 Dodge 6.7L Cummins. This kit includes everything you need to improve airflow, substantially decrease charge-air temperatures and support your truck at any power level. The first key component is the Mishimoto 6.7L Cummins intercooler piping kit. Our engineers have maximized airflow by eliminating restrictive bends, allowing for smooth and unimpeded airflow. The piping is constructed of mandrel-bent 3in aluminum for smooth flow and rugged durability. Also included are Mishimoto silicone boots with DuraCore technology and Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding force. Mishimoto DuraCore technology comprises the innermost layer of all Mishimoto diesel silicone boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of your boots and prevents leaks or blowouts. This package also includes the Mishimoto 6.7L Cummins intercooler. Extremely durable cast aluminum end tanks and a bar-and-plate core provide cool, dense air to your engine, with the reliability you need. With a 76.65-percent increase in external fin surface area, and a 37.8-percent larger core, this intercooler is proven to reduce intake air temps by 12.5-percent. All the components in this kit are engineered to last, just like your truck. Offered with either a Sleek Silver or Stealth Black core, the Mishimoto 6.7L Cummins intercooler kit, like all our Dodge Ram performance parts, is protected by the Mishimoto Lifetime Warranty. Whether your Cummins is stock or modified, trust Mishimoto and our line of Dodge Ram performance parts to keep your Dodge cool.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013 Ram 2500 Power Wagon 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26-percent better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21-percent increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013-2018 is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26-percent better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21-percent increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013-2018 is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26-percent better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21-percent increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013-2018 is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26-percent better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21-percent increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013-2018 is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26-percent better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21-percent increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013-2018 is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26-percent better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21-percent increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013-2018 is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

The Mishimoto 2014-2018 Chevrolet Silverado 1500 V8 performance aluminum radiator is the ideal upgrade for the stock Silverado radiator. This direct-fit radiator is designed and specifically engineered to maximize the cooling efficiency of your 2014-2018 Silverado whether It's your daily driver, work truck, or dedicated off-road vehicle. Thanks to a 2-inch thick core, the Mishimoto 2014-2018 Silverado 1500 V8 radiator boasts a 45.45-percent increase in coolant capacity over the stock radiator. Tube and fin surface area is also increased by 92.8-percent and 74.5-percent respectively over stock to make the most use of the air flowing through your Silverado's grille. The all-aluminum construction, along with strutted tubes in the top and bottom 8 rows, make this radiator tough enough to handle anything you can throw at it. The built-in oil and transmission coolers with installed stock-style fittings make installation a breeze. As with all Mishimoto products, this radiator is backed by Mishimoto's Lifetime Warranty. So, whether you're towing your weekend toys, ferrying the kids to school, or bombing dunes, you can rest easy knowing that your 2014-2018 Silverado 1500's engine is cooled by Mishimoto.This Part Fits: Year Make Model Submodel 2015-2018 Cadillac Escalade Base 2015-2018 Cadillac Escalade Luxury 2015-2018 Cadillac Escalade Platinum 2015-2016 Cadillac Escalade Premium 2017-2018 Cadillac Escalade Premium Luxury 2015-2018 Cadillac Escalade ESV Base 2015-2018 Cadillac Escalade ESV Luxury 2015-2018 Cadillac Escalade ESV Platinum 2015-2016 Cadillac Escalade ESV Premium 2017-2018 Cadillac Escalade ESV Premium Luxury 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2015-2020 Chevrolet Suburban LS 2015-2020 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017-2020 Chevrolet Suburban Premier 2015-2020 Chevrolet Tahoe LS 2015-2020 Chevrolet Tahoe LT 2015-2016 Chevrolet Tahoe LTZ 2015-2020 Chevrolet Tahoe PPV 2017-2020 Chevrolet Tahoe Premier 2015-2020 Chevrolet Tahoe SSV 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE 2015-2020 GMC Yukon Denali 2015-2020 GMC Yukon SLE 2015-2020 GMC Yukon SLT

Many prototypes entered, but only one came out on top. The engineers went through multiple different designs for this Fiesta ST intercooler, weighing the benefits and downfalls of each. The final design consists of a tube-and-fin style intercooler in order to allow airflow to the radiator and reduce overall weight. The core size is 51-percent larger than stock, and also provides a 25-percent increase in internal core volume. During testing, this Fiesta ST intercooler dropped intake temperatures by a huge 26 F! This Fiesta ST intercooler kit includes air diversion plates to channel air through the cooler for maximum efficiency. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. The all-aluminum, TIG-welded construction is of the highest quality, and like all Mishimoto Fiesta ST parts, it is backed by the Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2014-2017 Ford Fiesta ST

Many prototypes entered, but only one came out on top. The engineers went through multiple different designs for this Fiesta ST intercooler, weighing the benefits and downfalls of each. The final design consists of a tube-and-fin style intercooler in order to allow airflow to the radiator and reduce overall weight. The core size is 51-percent larger than stock, and also provides a 25-percent increase in internal core volume. During testing, this Fiesta ST intercooler dropped intake temperatures by a huge 26 F! This Fiesta ST intercooler kit includes air diversion plates to channel air through the cooler for maximum efficiency. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. The all-aluminum, TIG-welded construction is of the highest quality, and like all Mishimoto Fiesta ST parts, it is backed by the Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2014-2017 Ford Fiesta ST

Many prototypes entered, but only one came out on top. The engineers went through multiple different designs for this Fiesta ST intercooler, weighing the benefits and downfalls of each. The final design consists of a tube-and-fin style intercooler in order to allow airflow to the radiator and reduce overall weight. The core size is 51-percent larger than stock, and also provides a 25-percent increase in internal core volume. During testing, this Fiesta ST intercooler dropped intake temperatures by a huge 26 F! This Fiesta ST intercooler kit includes air diversion plates to channel air through the cooler for maximum efficiency. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. The all-aluminum, TIG-welded construction is of the highest quality, and like all Mishimoto Fiesta ST parts, it is backed by the Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2014-2017 Ford Fiesta ST

Many prototypes entered, but only one came out on top. The engineers went through multiple different designs for this Fiesta ST intercooler, weighing the benefits and downfalls of each. The final design consists of a tube-and-fin style intercooler in order to allow airflow to the radiator and reduce overall weight. The core size is 51-percent larger than stock, and also provides a 25-percent increase in internal core volume. During testing, this Fiesta ST intercooler dropped intake temperatures by a huge 26 F! This Fiesta ST intercooler kit includes air diversion plates to channel air through the cooler for maximum efficiency. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. The all-aluminum, TIG-welded construction is of the highest quality, and like all Mishimoto Fiesta ST parts, it is backed by the Mishimoto Lifetime Warranty!This Part Fits: Year Make Model Submodel 2014-2017 Ford Fiesta ST

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58-percent increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in internal core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5inin hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. The precision CNC-machined BPV flange allows you to retain the stock BPV.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2021 Ford Mustang EcoBoost 2015-2021 Ford Mustang EcoBoost Premium 2015-2021 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

"For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58% increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25% increase in internal core volume and 165% increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5" hot-side and 2.75" cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. The precision CNC-machined BPV flange allows you to retain the stock BPV. As with all ouThis Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2021 Ford Mustang EcoBoost 2015-2021 Ford Mustang EcoBoost Premium 2015-2021 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

"For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58% increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25% increase in internal core volume and 165% increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5" hot-side and 2.75" cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. The precision CNC-machined BPV flange allows you to retain the stock BPV. As with all ouThis Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2021 Ford Mustang EcoBoost 2015-2021 Ford Mustang EcoBoost Premium 2015-2021 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58-percent increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in internal core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5inin hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. The precision CNC-machined BPV flange allows you to retain the stock BPV.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2021 Ford Mustang EcoBoost 2015-2021 Ford Mustang EcoBoost Premium 2015-2021 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Mishimoto is proud to release the Performance Cat-back for the 2015+ Subaru WRX/STI. The biggest complaint is the stock cat-back exhaust systems lack of aggressiveness. By installing the Mishimoto Performance Stainless Steel Cat-back, the exhaust system is able to breathe easier, providing horsepower, torque, and a rich exhaust tone. After comparing many different muffler sizes and designs, the Engineers at Mishimoto chose oval mufflers which prevent highway drone, but still provide an aggressive exhaust tone. During dyno pulls with the 2015+ Subaru WRX/STI w/ CVT, Mishimoto'saw gains of up to 9 whp and 8 wtq using 93 octane fuel while maintaining safe AFRs on a stock tune (see additional images for dyno chart). This exhaust installs in under one hour and features quad 3.5in staggered double wall polished tips. The Mishimoto Performance Cat-back Exhaust provides an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! The engineers at Mishimoto designed this cat-back as a four-piece design with precision TIG welded 304 Stainless Steel. This allows a smooth exhaust flow from the 3.0in 2-bolt exhaust flange all the way through the 2.25in y-section. To top it off, this cat-back includes two 2.25in V-Band clamps, a 3in exhaust band clamp, a new 3in 2-bolt flange gasket, and all stainless steel hardware, so you don't have to worry about your hardware rusting ever again! For 2015 WRX owners looking to get the most out of their WRX, this cat-back exhaust mates perfectly with the Mishimoto Performance Downpipe. The Mishimoto Cat-Back Exhaust is proudly made in the USA and comes with the Mishimoto Lifetime Warranty you know and trust.This Part Fits: Year Make Model Submodel 2017-2020 Chevrolet Camaro LS 2016-2020 Chevrolet Camaro LT 2016-2020 Chevrolet Camaro SS 2015-2021 Subaru WRX Base 2015-2021 Subaru WRX Limited 2015-2021 Subaru WRX Premium 2015-2021 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2021 Subaru WRX STI Limited 2019 Subaru WRX STI S209 2016 Subaru WRX STI Series.HyperBlue 2018 Subaru WRX STI Type RA

Already installed the Mishimoto charge pipe kit onto your WRX? Now you need to go all the way to ensure that your WRX is seeing maximum charge temp drops! The stock top-mount intercooler is prone to head soak during repeated wide open throttle pulls and during track use. Mishimoto engineers spent months designing and testing this new intercooler to ensure optimum performance on both the street and track. This intercooler utilizes durable cast aluminum end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto intercooler has a 4" thick core and a total volume of 625 in3, making it one of the largest topmount intercoolers you can buy. Thanks to this volume and a very dense offset fin pitch, we are able to optimize heat transfer and support vehicles from stock up to 500 whp. This intercooler endured rigorous testing, showing a 35°F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto downpipe and stage 2 EcuTek tune. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. This intercooler bolts right up to the Mishimoto or some other aftermarket charge pipes with the supplied hot side silicone coupler. The awesome, 4 piece Mishimoto air splitter is included with this intercooler as well, this will help divert the maximum amount of air into your intercooler. The kit also includes a silicone intercooler to throttle-body hose for maximum durability under high boost. These components negate the need to gather supplies for installation, and they ensure years of reliable service. This intercooler is available in a durable powder-coated finish of Stealth Black or Sleek Silver, and is backed by the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2017 Subaru WRX Base 2015-2017 Subaru WRX Limited 2015-2017 Subaru WRX Premium

Looking for a way to reduce high intake temperatures on your stock or modified WRX? The solution is the Mishimoto Top-Mount Intercooler and Charge Pipe System engineered specifically for the 2015+ Subaru WRX. The stock top-mount intercooler is prone to heat soak during repeated wide open throttle pulls and during track use. Mishimoto engineers spent months designing and testing this new intercooler to ensure optimum performance on both the street and track. This intercooler utilizes durable cast aluminum end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto Top-Mount Intercooler has a 4" thick core and a total volume of 625 in3, making it one of the largest topmount intercoolers you can buy. Thanks to this volume and a very dense offset fin pitch, we are able to optimize heat transfer and support vehicles from stock up to 500 whp. The Mishimoto Top-Mount Intercooler endured rigorous testing, showing a 35 F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto downpipe and Stage 2 EcuTek tune. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. Included with this intercooler is Mishimoto's innovative charge pipe, utilizing a one-piece construction without the need for several couplers and clamps. An innovative, air splitter is included with the intercooler, this will help divert the maximum amount of air into your Mishimoto intercooler. The kit also includes a new charge pipe to intercooler hose, an intercooler to throttle-body hose, new bypass valve hoses, and a hot side O-ring gasket. These components negate the need to gather supplies for installation, and they ensure years of reliable service. This intercooler is available in a durable powder-coated finish of Stealth Black or Sleek Silver, with your choice of either a polished or wrinkle black charge pipe, and it includes the Mishimoto Lifetime WarrantyThis Part Fits: Year Make Model Submodel 2014-2018 Subaru Forester 2.0XT Premium 2014-2018 Subaru Forester 2.0XT Touring 2015-2021 Subaru WRX Base 2015-2021 Subaru WRX Limited 2015-2021 Subaru WRX Premium

Looking for a way to reduce high intake temperatures on your stock or modified WRX? The solution is the Mishimoto Top-Mount Intercooler and Charge Pipe System engineered specifically for the 2015+ Subaru WRX. The stock top-mount intercooler is prone to heat soak during repeated wide open throttle pulls and during track use. Mishimoto engineers spent months designing and testing this new intercooler to ensure optimum performance on both the street and track. This intercooler utilizes durable cast aluminum end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto Top-Mount Intercooler has a 4" thick core and a total volume of 625 in3, making it one of the largest topmount intercoolers you can buy. Thanks to this volume and a very dense offset fin pitch, we are able to optimize heat transfer and support vehicles from stock up to 500 whp. The Mishimoto Top-Mount Intercooler endured rigorous testing, showing a 35 F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto downpipe and Stage 2 EcuTek tune. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. Included with this intercooler is Mishimoto's innovative charge pipe, utilizing a one-piece construction without the need for several couplers and clamps. An innovative, air splitter is included with the intercooler, this will help divert the maximum amount of air into your Mishimoto intercooler. The kit also includes a new charge pipe to intercooler hose, an intercooler to throttle-body hose, new bypass valve hoses, and a hot side O-ring gasket. These components negate the need to gather supplies for installation, and they ensure years of reliable service. This intercooler is available in a durable powder-coated finish of Stealth Black or Sleek Silver, with your choice of either a polished or wrinkle black charge pipe, and it includes the Mishimoto Lifetime WarrantyThis Part Fits: Year Make Model Submodel 2014-2018 Subaru Forester 2.0XT Premium 2014-2018 Subaru Forester 2.0XT Touring 2015-2021 Subaru WRX Base 2015-2021 Subaru WRX Limited 2015-2021 Subaru WRX Premium

BMW has a knack for maintaining their stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015-2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water intercooling system for a means of keeping cool. Where BMW's intercooler design was enough to help bring this generation of mid-sized M's to their peak, we here at Mishimoto found some weaknesses that we felt obliged to improve on. We started with the end tanks. The Mishimoto Performance Air-to-Water Intercooler features full, cast aluminum end tanks, TIG welded to our bar-and-plate core for maximum durability as you increase the boost in your Bimmer. Our end tanks also include internal air diverters on both the inlet and outlet to ensure an even flow of charged air through the core. When it comes to the core, bigger is better, and we were able to expand the size of our core in all dimensions, resulting in a 29-percent increase in core volume while abstaining from any modifications when it comes to installation. Our new core also features a unique single-pass internal fin layout for the coolant passage for optimal heat transfer from the charged air to the coolant. With our improvements combined, we saw the Mishimoto 2015-2020 BMW F8X M3 and M4 Performance Intercooler increase flow through the core by 16-percent and recorded a 12 F drop in intake air temperatures when tested with the Mishimoto Performance Heat Exchanger. We also recorded an average increase of 11whp and 8wtq during our testing with peak gains of up to 31whp and 10wtq. With the micro-wrinkle black finish and sleek header plate design, the Mishimoto Performance Air-to-Water Performance intercooler makes for not only the perfect addition to your F8X build, but also looks right at home in the M's engine bay. Like all of our products, the Mishimoto 2015-2020 BMW F8X M3, M4, and M2 Competition Performance Air-to-WateThis Part Fits: Year Make Model Submodel 2016-2018 BMW M2 Base 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

BMW has a knack for maintaining their stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015-2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water intercooling system for a means of keeping cool. Where BMW's intercooling system design was enough to help bring this generation of mid-sized M's to their peak, we here at Mishimoto found some weaknesses that we felt obliged to improve on. The Mishimoto 2015-2020 BMW F8X M3/M4 Performance Intercooler Power Pack looks at strengthening the weaknesses in BMW's design starting with the charge pipes. It's a common problem with the factory plastic charge pipes to crack under pressure, or split at the seams, a less than idea situation as you pilot your M3 or M4 in any situation. We created a brand new design for the charge pipes that inspire more confidence in handling the boost pressure. Our design features a full aluminum construction, with a cast mid-section designed specifically to squeeze past the intake. Our charge pipe kit also includes a pair of matte black silicone couplers for a sleek and secure connection to the intercooler. The non-descript silver box is out and the stylish new Mishimoto Performance Air-to-Water Intercooler is in. With a stylish new look, our new design fits perfectly, both in terms of installation and aesthetic, in the M3 and M4's engine bay. The beauty is more than just skin deep too. Our improved core design features a bar-and-plate core with a 29-percent increase in core volume, as well as a unique single-pass coolant flow layout for optimal heat transfer. Combined with our 16-percent increase in flow through the core we were able to record a 12 F temperature drop in intake air temperatures while testing our full Power Pack. An air-to-water intercooling system wouldn't be complete without the heat exchanger. When it came to BMW's design, it was a soliThis Part Fits: Year Make Model Submodel 2016-2018 BMW M2 Base 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Pump up the volume of your 2015-2017 Ford Mustang GT exhaust! The utilization of several different axleback setups will provide the perfect sound for all ears. The full 304 stainless steel, mandrel-bent construction provides optimal flow from the powerful Coyote engine. The dual 4.5in double wall polished tips will be sure to give your opponent a nice view at the local drag strip. If you want the best in exhaust performance, pair this 2015-2017 Ford Mustang GT exhaust with the Mishimoto X or H-Pipe. The Mishimoto 2015-2017 Ford Mustang GT exhaust fits both manual and automatic transmission vehicles, and just like all Mishimoto Mustang parts, comes with the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2017-2020 Chevrolet Camaro LS 2016-2020 Chevrolet Camaro LT 2016-2020 Chevrolet Camaro SS 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2020 Ford Mustang GT Premium

The mantra behind the grandfather of all hot-hatchbacks has long since been that big things come in small packages. The 2015+ Golf TSI/GTI/R's and its intercooling system are about to receive a much-needed overhaul with the Mishimoto Performance Intercooler Kit. The stock system can be best described as the meat in an intercooler sandwich. It's no wonder with it placed directly between the radiator and AC condenser that this tube-and-fin constructed intercooler has trouble keeping up. Where this lighter core coupled with plastic end tanks might be suited for mass production and tame street driving, it will struggle to keep your intake air temperatures down under more intense driving, especially after the boost is turned up. The Mishimoto 2015+ Volkswagen MK7/MK8 Golf TSI/GTI/R Performance Intercooler, armed with an arsenal of cooling technology, takes the place of the stock intercooler. Our engineers were able to squeeze in a larger core, increasing the overall volume by 89-percent over stock and bumping up the external fin surface area by 162-percent. On top of the larger core, our all-aluminum, TIG-welded intercooler features a more robust bar-and-plate construction for better heat dissipation characteristics. In addition, the cast aluminum end tanks are integrated with airflow diverters to ensure use of the full core. When combined, our innovations for the MK7 intercooling system yielded max power gains of 14 whp and 12 wtq on the stock tuning. In addition, our charged air cooler dropped intercooler outlet temperatures by 23 F over stock equipment. Our 2015+ Volkswagen MK7/MK8 Golf TSI/GTI/R Performance Intercooler also includes a pair of CNC-machined aluminum mounting brackets and the Mishimoto Lifetime Warranty for a precise and worry-free installation.This Part Fits: Year Make Model Submodel 2015-2020 Audi A3 Premium 2015-2020 Audi A3 Premium Plus 2015-2019 Audi A3 Prestige 2015-2016 Audi A3 TDI Premium 2015-2016 Audi A3 TDI Premium Plus 2015-2016 Audi A3 TDI Prestige 2019 Audi A3 Titanium 2015-2019 Audi A3 Quattro Premium 2015-2019 Audi A3 Quattro Premium Plus 2015-2019 Audi A3 Quattro Prestige 2020 Audi S3 Premium 2015-2020 Audi S3 Premium Plus 2015-2019 Audi S3 Prestige 2015-2021 Audi TT Quattro Base 2018-2021 Audi TT RS Quattro Base 2016-2021 Audi TTS Quattro Base 2016 Volkswagen Golf Base 2015 Volkswagen Golf Launch Edition 2015-2019 Volkswagen Golf S 2015-2016,2018-2019 Volkswagen Golf SE 2015-2016 Volkswagen Golf SEL 2015 Volkswagen Golf TDI S 2015 Volkswagen Golf TDI SE 2015 Volkswagen Golf TDI SEL 2020-2021 Volkswagen Golf TSi 2017 Volkswagen Golf Wolfsburg Edition 2017-2019 Volkswagen Golf Alltrack S 2017-2019 Volkswagen Golf Alltrack SE 2017-2019 Volkswagen Golf Alltrack SEL 2023 Volkswagen Golf R 20th Anniversary Edition 2015-2019,2022-2024 Volkswagen Golf R Base 2016 Volkswagen Golf SportWagen Limited Edition 2015-2019 Volkswagen Golf SportWagen S 2015-2019 Volkswagen Golf SportWagen SE 2015-2018 Volkswagen Golf SportWagen SEL 2015 Volkswagen Golf SportWagen TDI S 2015 Volkswagen Golf SportWagen TDI SE 2015 Volkswagen Golf SportWagen TDI SEL 2023 Volkswagen GTI 40th Anniversary Edition 2015-2024 Volkswagen GTI Autobahn 2019 Volkswagen GTI Rabbit Edition 2015-2024 Volkswagen GTI S 2015-2024 Volkswagen GTI SE 2017 Volkswagen GTI Sport

The mantra behind the grandfather of all hot-hatchbacks has long since been that big things come in small packages. The 2015- 2021 Golf TSI/GTI/R's and its intercooling system are about to receive a much-needed overhaul with the Mishimoto Performance Intercooler Kit. The stock system can be best described as the meat in an intercooler sandwich. It's no wonder with it placed directly between the radiator and AC condenser that this tube-and-fin constructed intercooler has trouble keeping up. Where this lighter core coupled with plastic end tanks might be suited for mass production and tame street driving, it will struggle to keep your intake air temperatures down under more intense driving, especially after the boost is turned up. The Mishimoto 2015- 2021 Volkswagen MK7 Golf TSI/GTI/R Performance Intercooler, armed with an arsenal of cooling technology, takes the place of the stock intercooler. Our engineers were able to squeeze in a larger core, increasing the overall volume by 89-percent over stock and bumping up the external fin surface area by 162-percent. On top of the larger core, our all-aluminum, TIG-welded intercooler features a more robust bar-and-plate construction for better heat dissipation characteristics. In addition, the cast aluminum end tanks are integrated with airflow diverters to ensure use of the full core. In addition to the more robust intercooler, our Performance Intercooler Kit for your 2015- 2021 Golf or Audi A3/S3 includes our Performance Intercooler Pipe Kit. We ditched the stock plastic piping and rubber couplers for mandrel-bent aluminum piping and 5-layer silicone couplers. Our piping increases the air channels to and from the intercooler to 2.75 inches, resulting in a 30-percent increase in flow.When combined, our innovations for the MK7 intercooling system yielded max power gains of 14.5 whp and 13 wtq on the stock tuning. In addition, our charged air cooler dropped intercooler outlet temperatures by 23 FThis Part Fits: Year Make Model Submodel 2015-2020 Audi A3 Premium 2015-2020 Audi A3 Premium Plus 2015-2019 Audi A3 Prestige 2015-2016 Audi A3 TDI Premium 2015-2016 Audi A3 TDI Premium Plus 2015-2016 Audi A3 TDI Prestige 2019 Audi A3 Titanium 2015-2019 Audi A3 Quattro Premium 2015-2019 Audi A3 Quattro Premium Plus 2015-2019 Audi A3 Quattro Prestige 2020 Audi S3 Premium 2015-2020 Audi S3 Premium Plus 2015-2019 Audi S3 Prestige 2015-2021 Audi TT Quattro Base 2018-2021 Audi TT RS Quattro Base 2015-2021 Audi TTS Quattro Base 2016 Volkswagen Golf Base 2015 Volkswagen Golf Launch Edition 2015-2018 Volkswagen Golf S 2015-2016,2018 Volkswagen Golf SE 2015-2016 Volkswagen Golf SEL 2015 Volkswagen Golf TDI S 2015 Volkswagen Golf TDI SE 2015 Volkswagen Golf TDI SEL 2020-2021 Volkswagen Golf TSi 2017 Volkswagen Golf Wolfsburg Edition 2017-2019 Volkswagen Golf Alltrack S 2017-2019 Volkswagen Golf Alltrack SE 2017-2019 Volkswagen Golf Alltrack SEL 2015-2019 Volkswagen Golf R Base 2015-2019 Volkswagen Golf SportWagen S 2015-2018 Volkswagen Golf SportWagen SE 2015-2018 Volkswagen Golf SportWagen SEL 2015-2020 Volkswagen GTI Autobahn 2019 Volkswagen GTI Rabbit Edition 2015-2021 Volkswagen GTI S 2015-2020 Volkswagen GTI SE 2017 Volkswagen GTI Sport