aFe is proud to introduce an all new MACH Force-Xp cat-back dual exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L or V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified by our in house dyno. (Tested on a 2015 Mustang V6-3.7L) This cat-back exhaust system utilizes full 3" tubing with 2-1/4" clamp-on reduction tubes to fit OE connections. Remove them and combine with the aFe Power Twisted Steel long tube headers and connection pipes (P/N: 48-33012-YC) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. aFe also added an X-pipe with resonators to balance and evenly distribute exhaust pulses traveling through the exhaust system, creating more efficient flow and better performance while minimizing exhaust drone resulting in an awesome sound. To finish off the exhaust, dual 4" gloss black 304 stainless steel tips are included. This is a direct bolt-on system no modifications necessary and includes necessary hardware for a hassle-free installation. Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. X-Pipe with Resonators Balance Tube: The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow for better performance while minimizing exhaust drone. Simple Installation: This is a direct bolt-on system which retains your factory exhaust tips and includes necessary hardware for a hassle-free in stallation. No modifications necessary. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Dual 304 SS Tips: Finishing off this unique exhaust system are dual, aFe laser etched, 4" gloss black 304 stainless steel tips for an aggressive style.This Part Fits: Year Make Model Submodel 2015-2018 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2018 Ford Mustang GT Premium 2015-2017 Ford Mustang V6

aFe is proud to introduce an all new MACH Force-Xp cat-back dual exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L & V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified by our in house dyno. (*Dyno results are from P/N: 49-33087-B) This cat-back exhaust system utilizes full 3" tubing with 2-1/4" clamp-on reduction tubes to fit OE connections. Remove them and combine with the aFe Power Twisted Steel long tube headers and connection pipes (P/N: 48-33012-YC) for added flow and performance. This system incorporates dual, high-flow 4" round mufflers to improve performance across the power band while maintaining an aggressive sound. aFe also added an X-pipe to balance and evenly distribute exhaust pulses traveling through the exhaust system, creating more efficient flow and better performance while minimizing exhaust drone resulting in an awesome sound. To finish off the exhaust, dual 4" gloss black 304 stainless steel tips are included. This is a direct bolt-on system no modifications necessary and includes necessary hardware for a hassle-free installation. Aggressive Sound: Dual free-flowing 4" round mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. X-Pipe Balance Tube: The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow for better performance while minimizing exhaust drone. Simple Installation: This is a direct bolt-on system which retains your factory exhaust tips and includes necessary hardware for a hassle-free installation. No modifications necessary. Leak-Free Seal High quality band clamps are used for a complete 360 degree sealing surface. Dual 304 SS Tips: Finishing off this unique exhaust system are dual, aFe laser etched, 4" gloss black 304 stainless steel tips for an aggressive style.This Part Fits: Year Make Model Submodel 2015-2018 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2018 Ford Mustang GT Premium 2015-2017 Ford Mustang V6

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system for the 2010-2017 Nissan Patrol (Y62) with the V8-5.6L (400 hp) engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp black powder-coated muffler, OE-style bayonet hangers, band clamps for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a high luster polished 304 stainless steel, rolled slash cut laser etched tip for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp black powder-coated 22" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2011-2013 INFINITI QX56 Base 2014-2018 INFINITI QX80 Base 2016-2017,2019-2020 INFINITI QX80 Limited 2019-2024 INFINITI QX80 Luxe 2021-2024 INFINITI QX80 Premium Select 2021-2024 INFINITI QX80 Sensory 2021-2024 Nissan Armada Midnight Edition 2017-2024 Nissan Armada Platinum 2018-2020 Nissan Armada Platinum Reserve 2021-2023 Nissan Armada S 2017-2024 Nissan Armada SL 2017-2024 Nissan Armada SV

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, single wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2019 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

aFe is proud to introduce an all new MACH Force-Xp cat-back exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L or V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified by our in house dyno. (*Dyno results are from P/N: 49-33087-B). This cat-back exhaust system utilizes full 3" tubing with reduction tubes to fit the OE connections. Remove them and combine with the aFe power Twisted Steel Long tube headers and connection pipes (48-33012-YC) for added flow and performance. This system incorporates dual, high-flow 4" round mufflers to improve performance across the power band while maintaining an aggressive sound. aFe also added an X-pipe to balance and evenly distribute exhaust pulses traveling through the exhaust system, creating more efficient flow and better performance while minimizing exhaust drone resulting in an awesome sound. To finish off the exhaust, dual 4" high-luster polished 304 stainless steel tips are included. This is a direct bolt-on system no modifications necessary and includes necessary hardware for a hassle-free installation. Aggressive Sound: Dual free-flowing 4" round mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. X-Pipe Balance Tube: The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow for better performance while minimizing exhaust drone. Simple Installation: This is a direct bolt-on system which retains your factory exhaust tips and includes necessary hardware for a hassle-free installation. No modifications necessary. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Dual 304 SS Tips: Finishing off this unique exhaust system are dual, aFe laser etched, 4" polished 304 stainless steel tips for an aggressive style.This Part Fits: Year Make Model Submodel 2015-2018 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2018 Ford Mustang GT Premium 2015-2017 Ford Mustang V6

This MACH Force-Xp Cat-Back exhaust system is constructed of 3" mandrel-bent stainless steel tubing and comes complete with free-flowing high temp black powder-coated muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Hi-Tuck: This exhaust system is finished off with a Hi-Tuck that is developed to give you extra clearance during extreme angle climbs or descents. Installation is a Snap: This MACH Force-Xp uses all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp black powder-coated 22" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2013 INFINITI QX56 Base 2014-2018 INFINITI QX80 Base 2016-2017,2019-2020 INFINITI QX80 Limited 2019-2024 INFINITI QX80 Luxe 2021-2024 INFINITI QX80 Premium Select 2021-2024 INFINITI QX80 Sensory 2021-2024 Nissan Armada Midnight Edition 2017-2024 Nissan Armada Platinum 2018-2020 Nissan Armada Platinum Reserve 2021-2023 Nissan Armada S 2017-2024 Nissan Armada SL 2017-2024 Nissan Armada SV

aFe is proud to introduce an all new MACH Force-Xp cat-back exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L & V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified by our in house dyno. This cat-back exhaust system utilizes full 3" tubing with reduction tubes to fit the OE connections. Remove them and combine with the aFe power Twisted Steel Long tube headers and connect ion pipes (48-33012-YC) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. aFe also added an X-pipe with resonators to balance and evenly distribute exhaust pulses traveling through the exhaust system, creating more efficient flow and better performance while minimizing exhaust drone resulting in an awesome sound. To finish off the exhaust, dual 4" high-luster polished 304 stainless steel tips are included. This is a direct bolt-on system no modifications necessary and includes necessary hardware for a hassle-free installation. Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. X-Pipe with Resonators Balance Tube: The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow for better performance while minimizing exhaust drone. Simple Installation: This is a direct bolt-on system which retains your factory exhaust tips and includes necessary hardware for a hassle-free installation. No modifications necessary. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Dual 304 SS Tips: Finishing off this unique exhaust system are dual, aFe laser etched, 4" polished 304 stainless steel tips for an aggressive style.This Part Fits: Year Make Model Submodel 2015-2018 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2018 Ford Mustang GT Premium 2015-2017 Ford Mustang V6

This MACH Force-Xp Cat-Back exhaust system is constructed of 3" mandrel-bent stainless steel tubing and comes complete with free-flowing muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system produced +11 horsepower and +22 lbs. x ft. of torque over the stock exhaust system verified by our in house dyno. (*Dyno results from 49-36115-B/P) of torque over the stock exhaust system verified by our in house dyno. Hi-Tuck: This exhaust system is finished off with a Hi-Tuck that is developed to give you extra clearance during extreme angle climbs or descents. Installation is a Snap: This MACH Force-Xp uses all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel, 22" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

Performance Gains: This system produced gains of up to +11 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.High-Flow Stainless Steel Black Muffler: This system features a high-flow stainless steel black muffler, producing a mild sound. The muffler has a black finish for ultimate corrosion resistance.Dual 4" Diameter Black Exhaust Tips: Finishing off this exhaust system are dual 4" diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style.Installation: Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. Some cutting required.Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motors (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.Integrated Mitered Merge Collector: A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2016 BMW 228i Base 2015-2016 BMW 228i xDrive Base 2014-2016 BMW M235i Base 2015-2016 BMW M235i xDrive Base

Performance Gains: This system produced gains of up to +11 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.High-Flow Stainless Steel Black Muffler: This system features a high-flow stainless steel black muffler, producing a mild sound. The muffler has a black finish for ultimate corrosion resistance.Dual 4" Diameter Polished Exhaust Tips: Finishing off this exhaust system are dual 4" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style.Installation: Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. Some cutting required.Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motors (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.Integrated Mitered Merge Collector: A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2016 BMW M235i Base 2015-2016 BMW M235i xDrive Base

Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Exhaust Valve: This axle-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: is MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 4" Polished Tips: Finishing off this system are quad 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. Note: Failures of original equipment AFM and NPP actuators are not covered by aFe Power(R) warranty. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design this system the fitment is precise and requires no modifications.This Part Fits: Year Make Model Submodel 2020 Audi S3 Premium 2015-2020 Audi S3 Premium Plus 2015-2019 Audi S3 Prestige 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang V6

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design this system the fitment is precise and requires no modifications.This Part Fits: Year Make Model Submodel 2020 Audi S3 Premium 2015-2020 Audi S3 Premium Plus 2015-2019 Audi S3 Prestige 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium 2015-2017 Ford Mustang V6

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and provides a hassel-free install.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Audi A4 Premium 2017-2019 Audi A4 Premium Plus 2017-2019 Audi A4 Prestige 2019 Audi A4 Titanium 2017-2019 Audi A4 allroad Premium 2017-2019 Audi A4 allroad Premium Plus 2017-2019 Audi A4 allroad Prestige 2017-2019 Audi A4 Quattro Premium 2017-2019 Audi A4 Quattro Premium Plus 2017-2019 Audi A4 Quattro Prestige 2019 Audi A4 Quattro Ultra sport

With mandrel-bent stainless steel tubing, a rear muffler delete, and aggressive looking tips, this MACH Force Xp exhaust system exceeds in all area the factory system didn’t.This Part Fits: Year Make Model Submodel 2015-2017 Volkswagen GTI Autobahn 2015-2017 Volkswagen GTI S 2015-2017 Volkswagen GTI SE 2017 Volkswagen GTI Sport

With mandrel-bent stainless steel tubing, a rear muffler delete, and aggressive looking tips, this MACH Force Xp exhaust system exceeds in all area the factory system didn’t.This Part Fits: Year Make Model Submodel 2015-2017 Volkswagen GTI Autobahn 2015-2017 Volkswagen GTI S 2015-2017 Volkswagen GTI SE 2017 Volkswagen GTI Sport

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and a hassel-free install.This Part Fits: Year Make Model Submodel 2018-2020 Volkswagen GTI Autobahn 2019 Volkswagen GTI Rabbit Edition 2018-2020 Volkswagen GTI S 2018-2020 Volkswagen GTI SE

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2024 Ram 2500 Big Horn 2014-2024 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2014-2021 Ram 2500 Laramie Longhorn 2016-2024 Ram 2500 Limited 2021-2024 Ram 2500 Limited Longhorn 2014-2015,2019-2024 Ram 2500 Lone Star 2014-2016 Ram 2500 Outdoorsman 2014-2024 Ram 2500 Power Wagon 2023-2024 Ram 2500 Rebel 2014-2018 Ram 2500 SLT 2024 Ram 2500 Special Service 2014-2024 Ram 2500 Tradesman 2014-2024 Ram 3500 Big Horn 2014-2024 Ram 3500 Laramie 2014-2020 Ram 3500 Laramie Longhorn 2016-2024 Ram 3500 Limited 2021-2024 Ram 3500 Limited Longhorn 2014-2015,2017,2019-2022 Ram 3500 Lone Star 2014-2018 Ram 3500 SLT 2024 Ram 3500 Special Service 2014-2024 Ram 3500 Tradesman

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restri ction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2024 Ram 2500 Big Horn 2014-2024 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2014-2021 Ram 2500 Laramie Longhorn 2016-2024 Ram 2500 Limited 2021-2024 Ram 2500 Limited Longhorn 2014-2015,2019-2024 Ram 2500 Lone Star 2014-2016 Ram 2500 Outdoorsman 2014-2024 Ram 2500 Power Wagon 2023-2024 Ram 2500 Rebel 2014-2018 Ram 2500 SLT 2024 Ram 2500 Special Service 2014-2024 Ram 2500 Tradesman 2014-2024 Ram 3500 Big Horn 2014-2024 Ram 3500 Laramie 2014-2020 Ram 3500 Laramie Longhorn 2016-2024 Ram 3500 Limited 2021-2024 Ram 3500 Limited Longhorn 2014-2015,2017,2019-2022 Ram 3500 Lone Star 2014-2018 Ram 3500 SLT 2024 Ram 3500 Special Service 2014-2024 Ram 3500 Tradesman

Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. This axle-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Includes quad 4" diameter, carbon fiber tips with an aFe POWER logo. This item does not incorporate the AFM vales and will not fit models equipped with them.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Corvette Z06

In recent testing this Mach Force XP cat-back exhaust system produced 10 horsepower and 9 lbs. x ft. of torque. This exhaust system is constructed out of mandrel bent, 2.50 IN stainless steel and includes MIG welded hangers and OE style band clamps for a simple, leak-free bolt-on installation. A 2.50 IN high flow resonator is used to keep exhaust drone to a minimum while maintaining a sporty sound. aFe utilizes 3.5 IN double wall, angle cut, polished, stainless steel dual tips with an aFe laser etched logo which provides an aggressive yet elegant look.This Part Fits: Year Make Model Submodel 2010-2013 Volkswagen GTI Base 2014 Volkswagen GTI Driver's Edition 2014 Volkswagen GTI Wolfsburg Edition

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang GT

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang GT

This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a powerful sound. Finishing off this exhaust system are quad 3-1/2" diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system incorporates a factory style exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2022-2025 BMW Z4 M40i 2020 BMW Z4 M40i First Edition 2020-2021 BMW Z4 sDrive M40i

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8 2018-2021 Jeep Grand Cherokee Trackhawk

This Mach FORCE Xp exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

This Mach FORCE Xp exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2010-2014 Chevrolet Camaro LS 2010-2014 Chevrolet Camaro LT

aFe is proud to introduce the Cat-Back Exhaust System for the 2008 Volkswagen R32 MKV with the V6-3.2L engine. In recent testing this system produced 16 horsepower and 18 lbs. x ft. of torque. This exhaust starts out with 2.5 in. mandrel bent 304 stainless steel tubing and merges into dual 2.5 in. tubing which improves performance across the power band. The high-flow, stainless steel muffler gives an aggressive sound at high RPMs, yet maintaining a subtle tone at cruising speeds. To finish off this 100% TIG-welded exhaust are dual, 4 in. aFe power laser etched, double wall, gloss black, 304 stainless steel tips. It is a direct bolt-on system which requires no cutting or drilling and includes all necessary hardware for a hassle free installation. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2008 Volkswagen R32 Base

aFe is proud to introduce the Dual Cat-Back Exhaust System for the 2012-2013 Volkswagen Beetle with the L4-2.0L Turbo engine. In recent testing this Mach Force XP cat-back exhaust system produced 7 horsepower and 14 lbs. x ft. of torque. This exhaust system is constructed out of mandrel-bent, 2.50 in. 304 stainless steel and includes MIG welded hangers and OE-style band clamps for a simple, leak-free, bolt-on installation. A huge 6 in. round high-flow muffler is used to keep exhaust drone to a minimum while maintaining a sporty sound. aFe utilizes dual 4 in. double wall, polished, stainless steel tips with an aFe laser-etched logo which provides an aggressive yet elegant look. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2014 Volkswagen Beetle GSR 2013-2015 Volkswagen Beetle R-Line 2016 Volkswagen Beetle R-Line S 2016 Volkswagen Beetle R-Line SE 2016 Volkswagen Beetle R-Line SEL 2013-2014 Volkswagen Beetle TDI 2012-2013 Volkswagen Beetle Turbo

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4 in. carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a has sle-free installation. No modifications necessary. All aFe exhaust systems are manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

aFe is proud to announce the MACH Force XP cat-back exhaust system for the 2010-2013 Chevrolet Camaro with the V8-6.2L engine. In recent testing this system produced 22 horsepower and 26 lbs. x ft. of torque. This exhaust system is constructed from 3?, mandrel-bent, stainless steel and is MIG-welded. The system uses dual, high-flow mufflers with 3? tubing which improves performance across the power band while maintaining the true muscle car sound. aFe has incorporated an equalizer balance tube to evenly distribute exhaust pulses traveling through the exhaust system. This not only creates a more efficient flow and better performance, the equalizer balance tube also reduces sound decibels, minimizing exhaust drone. Included in this system are dual 4", double wall, polished, 304 stainless steel, slash cut aFe laser-etched exhaust tips. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary.This Part Fits: Year Make Model Submodel 2010-2013 Chevrolet Camaro SS 2012-2013 Chevrolet Camaro ZL1