Over $1,000

Turn up your Dodge Challenger's exhaust note while maintaining a mild interior sound level. This 304 stainless steel cat-back system features a unique X-pipe and crossover balance tube design to improve flow, sound and performance.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2023 Dodge Challenger GT 2015-2023 Dodge Challenger SXT 2015-2018 Dodge Challenger SXT Plus

Unleash power and sound while improving the looks on your Z4 M Coupe with this MACH Force-Xp 2-1/2" 304 stainless steel cat back system. The larger diameter, mandrel bent tubing along with high-flow, stainless steel mufflers are less restricting for maximum flow, optimum sound and long lasting good looks. 100% hand TIG-welded for proven quality and durability, this MACH Force-Xp system is finished off with quad 3" polished, stainless steel exhaust tips with laser-etched aFe POWER logos to give your E86 a track-prepped, custom look. Performance Gains: In testing, the cat-back exhaust system resulted in gains up to +7 horsepower and +15 lbs. x ft. of torque, as measured on our in-house dyno. Quad 3" Diameter Stainless Steel Tips: Quad, rear exit, 3" diameter, angle cut stainless steel exhaust tips with an aFe POWER logo laser-etched on the top for a custom look. High-Flow Performance Muffler: Incorporating less-restricting dual, high-flow, 304 stainless steel mufflers into the exhaust system to eliminate exhaust drone, maintaining a smooth, unique sound. 2-1/2" 304 Stainless Steel Tubing: Less restrictive than stock exhaust allows maximum flow and low turbulence; increasing torque, horsepower and improved throttle response. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Hassle-Free Installation: This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware and clamps are included for a hassle-free installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006-2008 BMW Z4 M Coupe 2006-2008 BMW Z4 M Roadster

Unleash power and sound while improving the looks on your Z4 M Coupe with this MACH Force-Xp 2-1/2" 304 stainless steel cat back system. The larger diameter, mandrel bent tubing along with high-flow, stainless steel mufflers are less restricting for maximum flow, optimum sound and long lasting good looks. 100% hand TIG-welded for proven quality and durability, this MACH Force-Xp system is finished off with quad 3" polished, stainless steel exhaust tips with laser-etched aFe POWER logos to give your E86 a track-prepped, custom look. Performance Gains: In testing, the cat-back exhaust system resulted in gains up to +7 horsepower and +15 lbs. x ft. of torque, as measured on our in-house dyno. Quad 3" Diameter Stainless Steel Tips: Quad, rear exit, 3" diameter, angle cut stainless steel exhaust tips with an aFe POWER logo laser-etched on the top for a custom look. High-Flow Performance Muffler: Incorporating less-restricting dual, high-flow, 304 stainless steel mufflers into the exhaust system to eliminate exhaust drone, maintaining a smooth, unique sound. 2-1/2" 304 Stainless Steel Tubing: Less restrictive than stock exhaust allows maximum flow and low turbulence; increasing torque, horsepower and improved throttle response. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Hassle-Free Installation: This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware and clamps are included for a hassle-free installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006-2008 BMW Z4 M Coupe 2006-2008 BMW Z4 M Roadster

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design this system the fitment is precise and requires no modifications.This Part Fits: Year Make Model Submodel 2014-2016 BMW 228i Base 2015-2016 BMW 228i xDrive Base

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2" diameter black stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2" diameter polished stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

This MACH Force XP Cat-Back exhaust system is constructed of 2-1/2" mandrel-bent stainless steel tubing and comes complete with free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system produced +11 horsepower and +23 lbs. x ft. of torque over the stock exhaust system verified by our in house dyno. The system is finished off with a side exit 4" polished, stainless steel, tip for an aggressive style. Installation is a Snap: This MACH Force XP uses all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A straight-through designed, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.). All aFe exhaust systems are engineered and manufactured in our Corona, California facility.Installation Instructions

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated metallic black finish and a stamped aFe power logo. Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 3-1/2" Stainless Steel Tips:Finishing off this system are Quad 3-1/2" diameter, 304 stainless steel tips with laser-etched aFe POWER logos. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 2-1/2" to 3" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated metallic black finish and a stamped aFe power logo. Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 3-1/2" Stainless Steel Tips:Finishing off this system are Quad 3-1/2" diameter, 304 stainles s steel tips with laser-etched aFe POWER logos. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 2-1/2" to 3" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Unleash power and sound while improving the looks on your M3 Coupe with this MACH Force-Xp cat back system by aFe POWER. The larger diameter, mandrel-bent tubing along with high-flow stainless steel mufflers optimize the sound and looks of your vehicle. This 100% hand TIG-welded system offers proven the quality and durability found in aFe POWER products, and is finished off with four massive 3" stainless steel exhaust tips with laser-etched logos.Installation InstructionsThis Part Fits: Year Make Model Submodel 2001-2006 BMW M3 Base

MACH Force-Xp 304 Stainless Steel Cat-Back Exhaust System w/ Black Tip Ford Explorer ST 20-21 V6-3.0L (tt)Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Explorer King Ranch 2020-2023 Ford Explorer Platinum 2020-2023 Ford Explorer ST 2020-2023 Lincoln Aviator Base 2020-2023 Lincoln Aviator Black Label 2020-2021 Lincoln Aviator Grand Touring 2022-2023 Lincoln Aviator Livery 2020-2023 Lincoln Aviator Reserve

MACH Force-Xp 304 Stainless Steel Cat-Back Exhaust System w/ Polished Tip Ford Explorer ST 20-21 V6-3.0L (tt)Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Explorer King Ranch 2020-2023 Ford Explorer Platinum 2020-2023 Ford Explorer ST 2020-2023 Lincoln Aviator Base 2020-2023 Lincoln Aviator Black Label 2020-2021 Lincoln Aviator Grand Touring 2022-2023 Lincoln Aviator Livery 2020-2023 Lincoln Aviator Reserve

Add power, sound and unique style to your BMW X5/X6 M with this aFe Power cat-back system which produced gains of up to +15 horsepower and +23 lbs. x ft. torque as measured on our in-house dyno. Dual 3" to 2-1/2" mandrel-bent, TIG welded, brush finished 304 stainless steel tubing keeps exhaust flowing smoothly for power gains you can feel. The factory exhaust valve motor is used to regulate the exhaust flow from a closed-valve, aggressive tone to wide-open, competition sound.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 BMW X5 M 2015-2019 BMW X6 M

Add more power and sound to your Challenger with this MACH Force-Xp cat-back system. Dual 3" mandrel-bent, MIG welded, 304 stainless steel tubing with x-pipe and crossover balance tube keeps exhaust flowing smoothly and evenly for power gains you can feel and hear. This system utilizes spherical clamps to retain the factory tips for a stock appearance. Dual stainless steel, high flow mufflers finished in high temp powder coating deliver an aggressive, performance exhaust note.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2016 Dodge Challenger R/T 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2" diameter carbon fiber stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2" diameter polished stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find you r particular application, please use our new search engines. If you do not see your particular application listed, please contact us.This Part Fits: Year Make Model Submodel 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.This Part Fits: Year Make Model Submodel 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

aFe POWER MACH Force-Xp cat-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers and produces an aggressive sound. A mitered merge X-pipe is used to balance and evenly distribute exhaust pulses traveling, minimizing exhaust drone and maximizing scavenging. The crossover tube balances distribution of exhaust pulses resulting reduced drone, and improving sound. This system includes factory style exhaust valves which require the remounding of the factory exhaust valve motors. These valves help regulate, direct and control the flow and back-pressure for maximum performance. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation., and is 100% MIG-Welded for race proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2022 Dodge Challenger SRT Hellcat Widebody 2023 Dodge Challenger SRT Hellcat Widebody Jailbreak 2017-2018 Dodge Charger Daytona 392 2017-2018 Dodge Charger R/T 392 2015-2018 Dodge Charger R/T Scat Pack 2019-2023 Dodge Charger Scat Pack 2020 Dodge Charger Scat Pack 392 Widebody 2022-2023 Dodge Charger Scat Pack Widebody 2015-2018 Dodge Charger SRT 392 2015-2020 Dodge Charger SRT Hellcat 2020-2023 Dodge Charger SRT Hellcat Widebody

aFe POWER MACH Force-Xp cat-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system is a muffler-less system and produces an aggressive sound. A mitered merge X-pipe is used to balance and evenly distribute exhaust pulses traveling, minimizing exhaust drone and maximizing scavenging. The crossover tube balances distribution of exhaust pulses resulting reduced drone, and improving sound. This system includes factory style exhaust valves which require the remounding of the factory exhaust valve motors. These valves help regulate, direct and control the flow and back-pressure for maximum performance. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation., and is 100% MIG-Welded for race proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2022 Dodge Challenger SRT Hellcat Widebody 2023 Dodge Challenger SRT Hellcat Widebody Jailbreak 2017-2018 Dodge Charger Daytona 392 2017-2018 Dodge Charger R/T 392 2015-2018 Dodge Charger R/T Scat Pack 2019-2023 Dodge Charger Scat Pack 2020 Dodge Charger Scat Pack 392 Widebody 2022-2023 Dodge Charger Scat Pack Widebody 2015-2018 Dodge Charger SRT 392 2015-2020 Dodge Charger SRT Hellcat 2020-2023 Dodge Charger SRT Hellcat Widebody

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2015 BMW 335i Base 2014-2016 BMW 435i Base

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2015 BMW 335i Base 2014-2016 BMW 435i Base

Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance. 3" mandrel bent, 409 stainless steel tubing and high-flow, muffler improve performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, 5" polished stainless steel tips with aFe Power logo badging for a unique, custom appearance.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2019-2023 Ram 1500 Big Horn 2019-2023 Ram 1500 Laramie 2019-2021 Ram 1500 Laramie Longhorn 2019-2023 Ram 1500 Limited 2021-2023 Ram 1500 Limited Longhorn 2019-2023 Ram 1500 Lone Star 2021 Ram 1500 Longhorn 2019-2023 Ram 1500 Rebel 2020-2021 Ram 1500 Special Service 2019-2023 Ram 1500 Tradesman

Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance. 3" mandrel bent, 409 stainless steel tubing and high-flow, muffler improve performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, 5" polished stainless steel tips with aFe Power logo badging for a unique, custom appearance.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2019-2023 Ram 1500 Big Horn 2019-2023 Ram 1500 Laramie 2019-2021 Ram 1500 Laramie Longhorn 2019-2023 Ram 1500 Limited 2021-2023 Ram 1500 Limited Longhorn 2019-2023 Ram 1500 Lone Star 2021 Ram 1500 Longhorn 2019-2023 Ram 1500 Rebel 2020-2021 Ram 1500 Special Service 2019-2023 Ram 1500 Tradesman

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2022 Chevrolet Colorado LT 2017-2022 Chevrolet Colorado WT 2017-2022 Chevrolet Colorado Z71 2017-2022 Chevrolet Colorado ZR2 2018-2020 GMC Canyon All Terrain 2021-2022 GMC Canyon AT4 2017-2020 GMC Canyon Base 2017-2022 GMC Canyon Denali 2021-2022 GMC Canyon Elevation 2021-2022 GMC Canyon Elevation Standard 2017-2020 GMC Canyon SLE 2017-2020 GMC Canyon SLT

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.This Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2" diameter carbon fiber stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

This system produced gains of up to +9 HP and +10 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow high-temperature metallic black muffler, producing a powerful sound. The muffler has a high-temperature metallic black finish for ultimate corrosion resistance. Finishing off this exhaust system are quad 4-1/2" diameter black stainless steel clamp-on exhaust tips. The tips feature a laser etched aFe POWER logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. The aFe Muffler features an integrated x-pipe to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

This system produced gains of up to +9 HP and +10 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow high-temperature metallic black muffler, producing a powerful sound. The muffler has a high-temperature metallic black finish for ultimate corrosion resistance. Finishing off this exhaust system are quad 4-1/2" diameter carbon fiber stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. The aFe Muffler features an integrated x-pipe to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

This system produced gains of up to +9 HP and +10 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow high-temperature metallic black muffler, producing a powerful sound. The muffler has a high-temperature metallic black finish for ultimate corrosion resistance. Finishing off this exhaust system are quad 4-1/2" diameter polished stainless steel clamp-on exhaust tips. The tips feature a laser etched aFe POWER logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. The aFe Muffler features an integrated x-pipe to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2023 Chevrolet Corvette Stingray

Undoubtedly, your Ford Raptor with the V6-3.5L (tt) EcoBoost is fully capable of handling anything you can throw at it. Now you can maximize your Raptor's full power, sound and style potential with aFe's MACH Force-Xp cat-back exhaust system. Constructed of 3" and 3 1/2" mandrel-bent, 304 stainless steel tubing, the MACH Force-Xp is 100% hand MIG-welded by certified craftsmen for race proven strength and durability for the long haul and uses factory style flanges and hanger locations for a secure, leak-free seal and hassle-free Install. aFe's 7" round x 24" long, free-flowing muffler is high-temp powder-coated metallic-black to improve performance across the Raptor's power band while delivering a powerful, aggressive tone. This dual rear-exit system is finished off with 4-1/2" polished, angle-cut, rolled stainless steel exhaust tips with laser-cut aFe POWER badge for a custom-styled look. Dual Y-Merge Assemblies: Evenly distributes exhaust pulses to minimize interior drone and enhance external tone. Aggressive Sound: Free-flowing, stainless steel, black powder-coated 24" length round muffler to absorb high pitch tones producing a powerful sound and unleashing more horsepower and t orque potential. Dual 4-1/2" stainless steel exhaust tips: This dual rear-exit system features 4-1/2" dia. polished, angle-cut rolled 304 stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This MACH Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

aFe is proud to introduce the MACH Force-Xp "Hi-Tuck" Cat-Back exhaust system for the 2017 Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" into 3-1/2" mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an "Old School" traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4" Tips: Finishing off this system are dual 4" diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

aFe is proud to introduce the MACH Force-Xp "Hi-Tuck" Cat-Back exhaust system for the 2017 Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" into 3-1/2" mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an "Old School" traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4" Tips: Finishing off this system are dual 4" diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not chan ge with time.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Raptor

Unleash power and sound while improving the looks on your M3 Coupe with this MACH Force-Xp cat back system by aFe POWER. The larger diameter, mandrel-bent tubing along with high-flow stainless steel mufflers optimize the sound and looks of your vehicle. This 100% hand TIG-welded system offers proven the quality and durability found in aFe POWER products, and is finished off with four massive 3" stainless steel exhaust tips with laser-etched logos.Installation InstructionsThis Part Fits: Year Make Model Submodel 2001-2006 BMW M3 Base

Introducing the new aFe Power MACH Force XP cat back exhaust system for the 07-13 BMW 328i E92 & E93 non-turbo. In recent testing, this system produced 4 horsepower and 8 lbs. x ft. of torque. This exhaust is constructed from 2.5in. brushed finish, mandrel bent, 304 stainless steel and is TIG-welded. A high flow, 304 stainless steel, single in dual o ut muffler was used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust are dual, aFe laser etched, 3in. polished 304 stainless steel tips. This exhaust uses all factory hanger locations. Note: Cutting is required and should be performed by a skilled technician.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006 BMW 325i Base 2006 BMW 325xi Base 2007-2013 BMW 328i Base 2009-2013 BMW 328i xDrive Base 2007-2008 BMW 328xi Base

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang Base