The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30- in. radius LED light bar. An additional 20- in. LED light bar can be mounted behind the central panel. Single 10 in. SR lights can be mounted behind each of the side panels.The HoneyBadger Raptor front bumper was designed to follow the body lines of the truck perfectly, while bringing a more aggressive edge to its stance. The steel is finished in a hammer black powder coat, while the aluminum panels are finished in a satin black powder coat. There are sensor holes to retain the OEM parking sensors, and sensor hole plugs are supplied if your Raptor does not have front sensors. The OEM tow hooks fit perfectly underneath the bumper.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30- in. radius LED light bar, which is partially protected by the top hoop. An additional 20- in. LED light bar can be mounted behind the central panel. Single 10 in. SR lights can be mounted behind each of the side panels. The HoneyBadger Raptor front bumper was designed to follow the body lines of the truck perfectly, while bringing a more aggressive edge to its stance. The steel is finished in a hammer black powder coat, while the aluminum panels are finished in a satin black powder coat. There are sensor holes to retain the OEM parking sensors, and sensor hole plugs are supplied if your Raptor does not have front sensors. The OEM tow hooks fit perfectly underneath the bumper.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

Made with plate steel and constructed in a modern box design, the HoneyBadger Raptor Rear Bumper provides superior protection. It's designed to flow with the Raptor's body lines tightly. Its factory dual exhaust and tow hooks fit comfortably below the bumper. Sensor cutouts retain full functionality of its parking/backup warning system. There are two, 1- in. clevis mounts that take 3/4- in. D-ring shackles to provide recovery options.Towards each end of the bumper are 10- in. LED light bar mounts behind satin black aluminum panels. Additionally, there are 2 pod light mounts on either side of the center of the bumper. A factory or aftermarket trailer wiring harness can be mounted to the bottom of the bumper near the hitch.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The Pro-Bolt On Front Bumper for the 2021+ Ford Raptor is our slimmest fitting bumper. The main radius .120- in. wall steel tube closely follows the contours of the front end and sits flush with the grille/valance. It features an 1/8- in. aluminum skid plate that is vented to ensure proper airflow reaches the OEM intercooler. Up to 6 cube lights, or a 20- in. radius LED light bar can be mounted in the bumper. We offer the optional ADD PRO Bolt-On Light Hoop if you'd like to mount up to four 6- in. round lights. As always, this Raptor bumper is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The ADD Pro Bolt-On Rear Bumper for the 2021+ Ford F-150 Raptor was constructed from .120- in. wall steel tubing, and provides durable protection to the rear of your truck. The top plate is constructed from CNC cut aluminum, and finished with a satin black powder coat. The steel tubing and structural steel plates are finished in a hammer black powder coat. There are pod light mounts towards both ends of the bumper, where 3 in. LED cube lights can be installed. The Pro Bolt-On rear bumper retains all OEM features such as the reverse sensors, license plate lights, hitch & trailer harness, and tow hooks. As always, this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The Race Series Chase Rack brings a race-inspired look to the bed of your TRX. Sitting atop the rack is an actuator-controlled mounting point for a 50-inch light bar. This enables you to raise and lower your light bar to fit in your garage or other low-clearance places. It also allows you to cut down on wind drag on the streets or freeway where you don't need the light bar. This was constructed using high strength .120 in. wall steel tubing and lightweight CNC cut aluminum paneling. It is then powder coated with a 2-stage process to protect against rust. Installation is simple, as the chase rack bolts-on without any modifications needed to your truck bed. Hardware and wiring harnesses for both the actuator and light bar are included with the rack. And as always this is Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ram 1500 TRX

Our ADD Pro Frame Cut Raptor Front Bumper maximizes your approach angle, and does it with a clean and refined style. It closely follows the body contours of the front end of your Raptor. Utilizing .120 in. wall steel tubing thats finished in a hammer black powder coat its low-profile fitment enables you to hit those desert whoops with virtually no worries about your ground clearance. A satin black aluminum skid plate helps protect the undercarriage when approaching steep hills or dunes. At the center of the bumper a 20-inch radius LED light bar can be mounted for the sake of nighttime adventures. Alternatively up to 6 cube lights can be mounted in place of the light bar. The light mount sits protected underneath the tube steel and above the skid plate. As always this bumper is made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

Designed for heavy off-road driving, the Krawler Front Bumper features high clearance angles perfect for rock crawling. Multiple off-road lighting options are available. These include (2) 3 - 4-inch round light mounts in the bumper, (2) light mounts on top of the bumper wings that fit up to 6-inch round lights, and an angular bull bar with (3) light mounts that can fit up to 6-inch round lights. A winch mount sits protected behind the bull bar, and heavily reinforced clevis mounts that take ¾-inch D-ring shackles provide recovery options. Mounts for the OEM parking sensors retain full functionality. An optional 3/16-inch aluminum skid plate is available. The bumper was finished in a hammer black powder coat, and the aluminum accent panels are finished in a satin black powder coat. As always, the Krawler is fully bolt-on and made in America.* Please Note: Our adaptive cruise control relocation bracket is required to retain functionality of the feature on included models. ** Please Note: If using the factory plastic skid, some modification is required for fitment.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2022-2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

The Krawler Rear Bumper was designed for heavy trail use and features high clearance angles. Its low profile fitment and modern plate steel construction is well suited for rock crawling. Two 3-4-inch round light mounts provide options for supplemental rear lighting. The Krawler accommodates the OEM Tire Mount & back-up camera, as well as the factory hitch and trailer harness. Included with the bumper is a 3rd brake light extension bracket compatible with up to a 37-inch spare tire, and a license plate relocation bracket that mounts to the carrier. Recovery options include heavily reinforced clevis mounts for ¾-inch D-ring shackles. The bumper is finished in a hammer black powder coat, while its aluminum accent panels are finished in a satin black powder coat. As always, the Krawler is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2022-2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

The Pro-Bolt On Front Bumper for the 2021-2023 Ford F-150 is our slimmest fitting bumper and was constructed in a prerunner style, giving your truck a serious but stylish look. Constructed with a heavy-duty .120-inch wall steel tube that fits right up against the grille/valance area, you'll get plenty of protection while keeping drag and weight down. An included 1/8-inch aluminum skid plate is vented to ensure maximum airflow reaches your intercooler & radiator, leaving it running cooler even as speed picks up. Plus, its design allows you to keep the intercooler in its original position so you can keep your overall setup simple and efficient. At the center of the bumper is a universal light mount with a couple of lighting options. Up to 6 cube lights, or a 20-inch radius LED light bar can be mounted here. The lights are protected from impact by the lower steel tube & skid plate, as well as side steel plating. As always, this F-150 bumper is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT

The 2021-2023 Ford F-150 PRO Bolt-On Rear Bumper showcases a sleek prerunner design and superior protection so you can take your next adventure in style. Constructed from .120 inch wall steel tubing and finished with hammer black powder coating this is the ultimate rear bumper for off-road durability. The top plate is CNC cut aluminum coated with a satin black powder finish - providing an elegant aesthetic when youre on or off the road. The PRO Bolt-On also retains all OEM features such as reverse sensors, license plate lights, hitch and trailer harness and tow hooks, so you don't have to compromise on safety either. For added convenience and safety, there are pod light mounts to fit 3 in. LED cube lights which are easily wired to power backup lighting while driving off the beaten path. Bring your F-150 to the next level with the stylish and functional PRO Bolt-On Rear Bumper. As always this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT

Addictive Desert Designs 22+ Toyota Tundra Black Label Front Bumper

Transform the front of your Jeep with the Addictive Desert Designs Rock Fighter front bumper. The Rock Fighter is a stubby width bumper, meaning it will look good with any aftermarket fender you want to put on your JL. The patented universal light mount system in the center of the bumper allows you to mount any brand/size of light up to a 20 in. RDS or 5 cube lights. There are two additional cube light mounts on each top corner of the bumper. The two clevis mounts on the front of the bumper accept a 3/4 in. D-Ring and are reinforced to help out in tough situations. The Rock Fighter provides a greater approach angle to maximize offroad performance and two different top hoop options for even more front-end protection. This bumper is available with a low profile top hoop or a stinger. The main bumper structure comes in hammer black powder coat with satin black panels. This product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2022-2023 Ford Bronco Raptor

The Rock Fighter Rear Bumper is the perfect addition for those looking to enhance their Bronco Raptor. With a low profile and sleek design, it's designed with contours engineered to flow seamlessly with the rear end - including the large Raptor fender flares. The modern plate steel construction guarantees durability even whether you're crawling rocks on the trail, or racing through the desert. In addition, you don't have to worry about sacrificing any convenience features: its design allows for compatibility with the factory-installed tire mount, backup camera, parking sensors, and license plate light. We've also incorporated two reinforced clevis mounts accept soft shackles for maximum recovery options in case of an emergency. The Rock Fighter can be installed with or without the factory mud flaps. As always, this is fully bolt-on and Made in the USA.This Part Fits: Year Make Model Submodel 2022-2023 Ford Bronco Raptor

The Stealth Fighter Winch Front Bumper is the perfect upgrade for your 3rd Gen Toyota Tundra. This aggressive yet modern bumper design embraces the Tundra's rugged and powerful exterior, providing a seamless fit. Not only does this front bumper add style to your truck, but it comes with additional protection and extreme utility.This Part Fits: Year Make Model Submodel 2022-2023 Toyota Tundra 1794 Edition 2022-2023 Toyota Tundra Capstone 2022-2023 Toyota Tundra Limited 2022-2023 Toyota Tundra Platinum 2022-2023 Toyota Tundra SR 2022-2023 Toyota Tundra SR5 2022-2023 Toyota Tundra TRD Pro

Sleek, tough, and ready to take on anything, the 3rd Gen Tundra Stealth Fighter Rear Bumper is perfect for anyone who wants to add a little extra edge to their truck. With its mid-width design and integrated light pod mounts, this bumper is sure to turn heads no matter where you go. It's finished in a hammered black powder coat with satin black aluminum accent panels for a touch of rugged sophistication. We've integrated the factory reverse and license plate lights seamlessly into its design. The bumper retains Factory Blind Spot Detection and OEM Backup Sensor Functionality, so you can drive with confidence knowing that your safety is always our top priority. No cutting of the body panels is required for installation. The factory hitch & receiver fit perfectly with the bumper and function as intended. As always, this is fully bolt-on and Made in the USA.This Part Fits: Year Make Model Submodel 2022-2023 Toyota Tundra 1794 Edition 2022-2023 Toyota Tundra Capstone 2022-2023 Toyota Tundra Limited 2022-2023 Toyota Tundra Platinum 2022-2023 Toyota Tundra SR 2022-2023 Toyota Tundra SR5 2022-2023 Toyota Tundra TRD Pro

Addictive Desert Designs 24+ GMC 2500/3500 Phantom Front Bumper w/Winch- Hammer Black

Addictive Desert Designs 25+ RAM 1500 RHO Bomber Front Bumper (20 Inch Lights)

The Addictive Desert Designs ADD-Lander overland rack is now available for all full-size pickup trucks (with some exceptions). The universal design uses a clamp mounting system, so there is no drilling into your bed rails required for installation. This will fit Ram, Chevy, GMC and Ford 1500/2500/3500 series trucks. The combination of plate steel and tube gives a unique look while providing a sturdy mounting point for heavier items up top, such as rooftop tents. Slotted rails along the side of the universal overland rack give a mounting point almost any off-road accessory. As always, this product is powder coated hammer black and made in America.

CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!WarrantyInstallation InstructionsInstallation Instructions

AEM CD5 Carbon Flat Panel Digital Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon car dashboard monitors, but do not have buttons or an LED shade hood built into the enclosure. AEM CD5 Carbon Flat Panel Digital Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the car dashboard monitor's enclosure and are fully programmableInstallation InstructionsInstallation Instructions

CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

AEM CD5 Carbon Flat Panel Digital Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon car dashboard monitors, but do not have buttons or an LED shade hood built into the enclosure. AEM CD5 Carbon Flat Panel Digital Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the car dashboard monitor's enclosure and are fully programmableInstallation InstructionsInstallation Instructions

CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

AEM CD5 Carbon Flat Panel Digital Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon car dashboard monitors, but do not have buttons or an LED shade hood built into the enclosure. AEM CD5 Carbon Flat Panel Digital Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the car dashboard monitor's enclosure and are fully programmableInstallation InstructionsInstallation Instructions

CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

AEM CD5 Carbon Flat Panel Digital Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon car dashboard monitors, but do not have buttons or an LED shade hood built into the enclosure. AEM CD5 Carbon Flat Panel Digital Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the car dashboard monitor's enclosure and are fully programmableInstallation InstructionsInstallation Instructions

AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.Installation InstructionsInstallation Instructions

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation Instructions

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.Installation InstructionsInstallation Instructions

AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.Installation InstructionsInstallation Instructions

AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.Installation InstructionsInstallation Instructions

The AEM EV Combined Charging Unit (CCU) combines both an On-Board Charger (OBC) and a DC-DC Converter (DCDC). The OBC charges the HV Battery Pack by taking 120v or 240v AC energy from the grid, converting it to high voltage DC and charging the high voltage battery in the vehicle. The DC-DC converter takes the high voltage from the battery pack and converts it to low voltage to maintain the charge in the vehicles 12V battery. The DC-DC converter performs the duties that the alternator does in an ICE vehicle. The CCU is fully controlled by the VCU via the CAN bus and the OBC and DC-DC report voltage, current and status information back to the VCU.Installation Instructions