Magnaflow 00-04 Chev Corvette V8 5.7L Comp Series Quad Ctr Rr Exit SS Cat-Back Perf Exhaust
$1,453.65
$1,998.78
The MagnaFlow Chevrolet Corvette Competition Series 15281 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.7L 2000-2004 Chevrolet Corvette with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Center Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Rolled Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15281 is engineered to make your vehicle’s engine produce Agressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15281’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2003
Chevrolet
Corvette
50th Anniversary Edition
2003
Chevrolet
Corvette
50th Anniversary Edition Pace Car
2000-2004
Chevrolet
Corvette
Base
2001-2004
Chevrolet
Corvette
Z06
MagnaFlow 00-05 Chevy Impala/Monte Carlo V6 3.4L/3.8L Dual Rear Exit Stainless Cat-Back Perf Exhaust
$1,164.05
$1,600.57
The MagnaFlow Chevrolet Street Series 16729 brings out the personality of your 3.4L, 3.8L 2000-2005 Chevrolet with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this Chevrolet exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16729 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16729 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2000-2005
Chevrolet
Impala
Base
2000-2005
Chevrolet
Impala
LS
2003
Chevrolet
Impala
LS Sport
2003-2005
Chevrolet
Impala
Police
2004-2005
Chevrolet
Impala
SS
2000-2005
Chevrolet
Monte Carlo
LS
2003
Chevrolet
Monte Carlo
LS Competition
2003
Chevrolet
Monte Carlo
LS Sport
2005
Chevrolet
Monte Carlo
LT
2000-2005
Chevrolet
Monte Carlo
SS
2002
Chevrolet
Monte Carlo
SS 35th Anniversary Edition
2002
Chevrolet
Monte Carlo
SS Dale Earnhardt Signature Edition
2003
Chevrolet
Monte Carlo
SS High Sport
2003
Chevrolet
Monte Carlo
SS Pace Car
MagnaFlow 01-04 Honda Civic DX/LX Manifold DF Converter
$1,058.00
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50884. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2001-2005 Honda Civic and 2001-2005 Acura EL, this direct-fit catalytic converter also interchanges with OE parts 18160-PLM-A00, 18160-PLM-A50, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.User 1This Part Fits:
Year
Make
Model
Submodel
2001-2005
Honda
Civic
DX
2001-2005
Honda
Civic
GX
2001-2005
Honda
Civic
HX
2001-2005
Honda
Civic
LX
2005
Honda
Civic
LX Special Edition
2004-2005
Honda
Civic
Value Package
MagnaFlow 02-06 Nisssan Altima/Sentra V4 2.5L Manifold Direct Fit Catalytic Converter
$1,102.00
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50805. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2002-2006 Nissan Altima and 2002-2006 Nissan Sentra, this direct-fit catalytic converter also interchanges with OE parts 14002-9J310, 14002-9J30B, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2002-2004,2006
Nissan
Altima
Base
2002-2006
Nissan
Altima
S
2002-2006
Nissan
Altima
SL
2003
Nissan
Sentra
Limited Edition
2004
Nissan
Sentra
S
2002-2006
Nissan
Sentra
SE-R
2002-2006
Nissan
Sentra
SE-R Spec V
MagnaFlow 02-08 Lexus SC430 L Stainless C/B SYS Performance exhaust
$1,137.65
$1,564.28
The MagnaFlow Lexus SC430 Street Series 16917 brings out the personality of your 4.3L 2002-2008 Lexus SC430 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5 x 5.5in. Polished Welded-Double Wall-Straight Cut-Rolled Edge tips, this Lexus SC430 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Lexus SC430’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16917 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16917 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2002-2008
Lexus
SC430
Base
MagnaFlow 03-06 Infiniti G35 V6 3.5L Dual Rear Exit Stainless Cat-Back Performance Exhaust
$1,194.03
$1,641.80
The MagnaFlow INFINITI G35 Street Series 16861 brings out the personality of your 3.5L 2003-2006 INFINITI G35 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this INFINITI G35 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other INFINITI G35’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16861 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16861 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2003-2006
Infiniti
G35
Base
2004-2006
Infiniti
G35
X
Magnaflow 04-09 Nissan Quest 3.5L Direct Fit Converter
$1,336.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592710. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2005-2009 Nissan Quest. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2005-2009
Nissan
Quest
Base
2005-2009
Nissan
Quest
S
2005-2009
Nissan
Quest
SE
2005-2009
Nissan
Quest
SL
MagnaFlow 05-06 Chrsyler Crossfire V6 3.2L S/C SRT-6 Dual Center Rear Exit Cat Back Perf Exhaust
$1,074.70
$1,477.71
The MagnaFlow Chrysler Crossfire Competition Series 15054 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.2L 2005-2006 Chrysler Crossfire with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Center Rear exit with 3.5 x 5.5in. Polished Welded-Double Wall-Straight Cut-Rolled Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 15054 is engineered to make your vehicle’s engine produce Agressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15054’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2005-2006
Chrysler
Crossfire
SRT-6
MagnaFlow 05-07 Audi A4 Quattro V6 3.2L SS Cat-Back Dual Split Rear Exit 2 Tips Perf Exhaust Sys
$1,542.73
$2,121.25
The MagnaFlow Audi A4 Quattro Touring Series 15326 brings enhanced engine sound and dyno-proven performance to your 3.2L 2005-2008 Audi A4 Quattro with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Audi A4 Quattro exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Audi A4 Quattro’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 4 Straight-Through muffler ending in a Dual Split Rear exit with 4 Polished Welded-Double Wall-Angle Cut-Rolled Edge-Resonated tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15326 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2005-2008
Audi
A4 Quattro
Avant
2005-2008
Audi
A4 Quattro
Base
2007-2008
Audi
A4 Quattro
Cabriolet
Magnaflow 05-11 Toyota Tacoma Converter DF 4.0L
$1,488.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5481342. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2005-2011 Toyota Tacoma, 2005-2009 Toyota 4Runner, and more, this direct-fit catalytic converter also interchanges with OE parts 17140-0P100 and 17140-31250, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2005-2009
Toyota
4Runner
Limited
2005-2009
Toyota
4Runner
Sport
2005-2009
Toyota
4Runner
SR5
2007-2009
Toyota
FJ Cruiser
Base
2008
Toyota
FJ Cruiser
Trail Teams Special Edition
2007
Toyota
FJ Cruiser
TRD Special Edition
2005-2011
Toyota
Tacoma
Base
2005-2011
Toyota
Tacoma
Pre Runner
2005-2011
Toyota
Tacoma
X-Runner
2005-2006
Toyota
Tundra
Base
2005-2006
Toyota
Tundra
SR5
MagnaFlow 06 Mitsubishi Raider Catalytic Converter DF (California)
$1,987.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4451627. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2006 Mitsubishi Raider and interchanges with OE part 5201 3780AB. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2006
Mitsubishi
Raider
DuroCross
2006
Mitsubishi
Raider
LS
MagnaFlow 06-08 Hyundai Sonata 2.4L Direct Fit CARB Compliant Manifold Catalytic Converter
$1,231.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531970. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2006-2008 Hyundai Sonata, 2006-2008 Kia Optima, and more, this direct-fit catalytic converter also interchanges with OE parts 28510-25250 and 28510-25450, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2006
Hyundai
Sonata
GL
2006-2008
Hyundai
Sonata
GLS
2008
Hyundai
Sonata
Limited
2008
Hyundai
Sonata
SE
2006-2008
Kia
Optima
EX
2006-2008
Kia
Optima
LX
2007-2008
Kia
Rondo
EX
2007-2008
Kia
Rondo
LX
MagnaFlow 06-09 Honda S2000 2.2L California Catalytic Converter Direct Fit
$1,385.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461261. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2006-2009 Honda S2000 and interchanges with OE part 18160-PZX-000. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2006-2009
Honda
S2000
Base
2008-2009
Honda
S2000
CR
MagnaFlow 06-10 Dodge Charger 2.7L/3.5L Duals Sys CB
$1,432.79
$1,970.08
The MagnaFlow Dodge Charger Street Series 16936 brings out the personality of your 2.7L, 3.5L 2006-2010 Dodge Charger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Rolled Edge-Resonated tips, this Dodge Charger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Charger’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16936 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16936 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2006-2007
Dodge
Charger
Base
2006-2010
Dodge
Charger
Pursuit
2006-2010
Dodge
Charger
SE
2006-2010
Dodge
Charger
SXT
MagnaFlow 06-15 Mazda MX-5 Miata Direct Fit CARB Compliant Manifold Catalytic Converter
$1,139.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531919. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2006-2015 Mazda MX-5 Miata and interchanges with OE parts LFYJ-20-50XB and LFZJ-20-50XB. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2015
Mazda
MX-5 Miata
25th Anniversary Edition
2006
Mazda
MX-5 Miata
Base
2013-2015
Mazda
MX-5 Miata
Club
2006
Mazda
MX-5 Miata
Club Spec
2006-2015
Mazda
MX-5 Miata
Grand Touring
2011-2012
Mazda
MX-5 Miata
Special Edition
2006-2015
Mazda
MX-5 Miata
Sport
2007-2009
Mazda
MX-5 Miata
SV
2006-2012
Mazda
MX-5 Miata
Touring
MagnaFlow 07 Audi Q7 V8 4.2L Dual Split Rear Exit Stainless Cat-Back Perf Exhaust
$1,440.50
$1,980.69
The MagnaFlow Audi Q7 Street Series 15085 brings out the personality of your 3.0L, 4.2L 2007-2015 Audi Q7 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this Audi Q7 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Audi Q7’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15085 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15085 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2007
Audi
Q7
Base
2007-2009,2011-2015
Audi
Q7
Premium
2011-2015
Audi
Q7
Premium Plus
2010-2015
Audi
Q7
Prestige
MagnaFlow 07-10 Dodge Charger 3.5L CARB Compliant Direct Fit Catalytic Converter
$1,822.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561539. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed to fit the 2007-2010 Dodge Charger, 2007-2010 Chrysler 300, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2007-2010
Chrysler
300
Limited
2010
Chrysler
300
S
2009
Chrysler
300
Signature Series
2007-2010
Chrysler
300
Touring
2007
Dodge
Charger
Base
2007-2010
Dodge
Charger
Pursuit
2007-2010
Dodge
Charger
SE
2007-2010
Dodge
Charger
SXT
2007-2008
Dodge
Magnum
SE
2007-2008
Dodge
Magnum
SXT
MagnaFlow 07-10 Dodge Charger 3.5L CARB Compliant Direct Fit Catalytic Converter
$1,822.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561540. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed to fit the 2007-2010 Dodge Charger, 2007-2010 Chrysler 300, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2007-2010
Chrysler
300
Limited
2010
Chrysler
300
S
2009
Chrysler
300
Signature Series
2007-2010
Chrysler
300
Touring
2007
Dodge
Charger
Base
2007-2010
Dodge
Charger
Pursuit
2007-2010
Dodge
Charger
SE
2007-2010
Dodge
Charger
SXT
2007-2008
Dodge
Magnum
SE
2007-2008
Dodge
Magnum
SXT
MagnaFlow 07-11 Mini Cooper L4-1.6LGAS California Catalytic Converter Direct Fit
$1,115.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531028. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2007-2011 Mini Cooper and interchanges with OE part 18 40 7 559 400. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2007-2010
Mini
Cooper
Base
2008-2011
Mini
Cooper
Clubman
MagnaFlow 07-13 BMW 328i 3.0L L6 California Catalytic Converter Direct Fit
$1,398.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5571765. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2007-2013 BMW 328i, 2009-2013 BMW 328i xDrive, and more, this direct-fit catalytic converter also interchanges with OE parts 18 30 7 547 840 and 18 30 7 566 937. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2006
BMW
325i
Base
2006
BMW
325xi
Base
2007-2013
BMW
328i
Base
2009-2013
BMW
328i xDrive
Base
2007-2008
BMW
328xi
Base
2006
BMW
330i
Base
2006
BMW
330xi
Base
Magnaflow 07-18 Toyota Tundra 5.7L CARB Compliant Direct-Fit Catalytic Converter
$2,993.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582630. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2018 Toyota Tundra and 2008-2017 Toyota Sequoia, this direct-fit catalytic converter also interchanges with OE parts 17410-0S011 and 17410-0S020, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2008-2017
Toyota
Sequoia
Limited
2008-2017
Toyota
Sequoia
Platinum
2008-2017
Toyota
Sequoia
SR5
2014-2017
Toyota
Tundra
1794 Edition
2007-2013
Toyota
Tundra
Base
2007-2017
Toyota
Tundra
Limited
2010-2017
Toyota
Tundra
Platinum
2014-2018
Toyota
Tundra
SR
2007-2011,2014-2018
Toyota
Tundra
SR5
2015-2017
Toyota
Tundra
TRD Pro
MagnaFlow 08-10 BMW 535i California Catalytic Converter Direct Fit 2.5in Pipe Diameter
$1,884.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5411062. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2008-2010 BMW 535i, 2008 BMW 535xi, and more, this direct-fit catalytic converter also interchanges with OE part 18 30 7 565 331. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2008-2010
BMW
535i
Base
2009-2010
BMW
535i xDrive
Base
2008
BMW
535xi
Base
MagnaFlow 08-10 Pontiac G6 2.4L Underbody Direct Fit CARB Compliant Manifold Catalytic Converter
$1,047.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531060. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed to fit the 2008-2010 Chevrolet Malibu, 2008-2010 Pontiac G6, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to be certified by CARB for legal use in CA/CARB restricted states for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2008-2010
Chevrolet
Malibu
Hybrid
2008-2010
Chevrolet
Malibu
LS
2008-2009
Chevrolet
Malibu
LT
2008-2010
Pontiac
G6
Base
2007-2008
Saturn
Aura
Green Line
2009
Saturn
Aura
Hybrid
2008-2009
Saturn
Aura
XE
2009
Saturn
Aura
XR
Magnaflow 08-17 Toyota Sequoia 5.7L CARB Compliant Direct-Fit Catalytic Converter
$3,203.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582559. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2008-2017 Toyota Sequoia. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2008-2017
Toyota
Sequoia
Limited
2008-2017
Toyota
Sequoia
Platinum
2008-2017
Toyota
Sequoia
SR5
MagnaFlow 09-10 Dodge Grand Caravan 3.8L CARB Compliant Direct Fit Catalytic Converter
$1,756.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551510. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.Designed to fit the 2010 Chrysler Town & Country and 2009-2010 Dodge Grand Caravan, this direct-fit catalytic converter also interchanges with OE part 6804 0858AC. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2010
Chrysler
Town & Country
LX
2010
Chrysler
Town & Country
Touring
2010
Chrysler
Town & Country
Touring Plus
2010
Chrysler
Town & Country
Walter P. Chrysler Signature Series
2009-2010
Dodge
Grand Caravan
SXT
Magnaflow 09-11 Chev Corvette V8 6.2L Comp Series Quad Center Rear Exit SS Cat-Back Perf Exhaust
$1,295.81
$1,781.74
The MagnaFlow Chevrolet Corvette Race Series 15283 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 6.2L 2009-2013 Chevrolet Corvette take on any pretenders, whether on the track or the street. Exhaust kit 15283 is engineered to produce our powerful, resonant signature exhaust note at VeryAggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Chevrolet Corvette exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Quad Center Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15283’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15283 is backed by MagnaFlow’s limited lifetime warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2009-2013
Chevrolet
Corvette
Base
2010-2013
Chevrolet
Corvette
Grand Sport
2009-2011
Chevrolet
Corvette
ZR1
Magnaflow 09-13 Dodge Ram 1500 V6 3.6L Dual Spilt Rear Exit Polished Stainless C/B Perf Exhaust
$1,192.76
$1,640.05
The MagnaFlow Street Series 15249 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-Single Wall-Angle Cut-Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Agressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15249 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15249 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2009-2010
Dodge
Ram 1500
ST
2014-2018,2022
Ram
1500
Big Horn
2014-2018
Ram
1500
Express
2013-2017,2022
Ram
1500
HFE
2014-2018
Ram
1500
Laramie
2022
Ram
1500
Limited Longhorn
2014-2018,2022
Ram
1500
Lone Star
2013-2016
Ram
1500
Outdoorsman
2015-2018,2022
Ram
1500
Rebel
2013-2018
Ram
1500
SLT
2017-2018
Ram
1500
Sport
2011-2012
Ram
1500
ST
2013-2018,2022
Ram
1500
Tradesman
2019
Ram
1500 Classic
Big Horn
2019-2023
Ram
1500 Classic
Express
2019
Ram
1500 Classic
Lone Star
2019-2023
Ram
1500 Classic
SLT
2019-2023
Ram
1500 Classic
Tradesman
2019-2023
Ram
1500 Classic
Warlock
Magnaflow 09-15 Dodge Ram 1500 V8 Dual Spilt Rear Exit Black Stainless C/B Perf Exhaust
$1,347.60
$1,852.95
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow MF Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2009-2010
Dodge
Ram 1500
Laramie
2009-2010
Dodge
Ram 1500
SLT
2009-2010
Dodge
Ram 1500
Sport
2009-2010
Dodge
Ram 1500
ST
2009-2010
Dodge
Ram 1500
TRX
2009-2010
Dodge
Ram 1500
TRX4
2011-2018
Ram
1500
Big Horn
2012-2018
Ram
1500
Express
2016-2017
Ram
1500
HFE
2011-2018
Ram
1500
Laramie
2014-2015
Ram
1500
Laramie Limited
2011-2018
Ram
1500
Laramie Longhorn
2015-2018
Ram
1500
Limited
2022
Ram
1500
Limited Longhorn
2014-2018
Ram
1500
Lone Star
2011-2016
Ram
1500
Outdoorsman
2013
Ram
1500
R/T
2015-2018
Ram
1500
Rebel
2011-2018
Ram
1500
SLT
2014-2018
Ram
1500
Special Service
2011-2018
Ram
1500
Sport
2011-2012
Ram
1500
ST
2011-2018
Ram
1500
Tradesman
2012
Ram
1500
Tradesman HD
2019
Ram
1500 Classic
Big Horn
2019-2023
Ram
1500 Classic
Express
2019
Ram
1500 Classic
Lone Star
2019-2023
Ram
1500 Classic
SLT
2019-2023
Ram
1500 Classic
Special Service
2019-2023
Ram
1500 Classic
Tradesman
2019-2023
Ram
1500 Classic
Warlock
MagnaFlow 09-19 Ford F53 V10 6.8L Underbody 6.8L Direct Fit Catalytic Converter
$2,449.00
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280435. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment.^Designed to fit the 2014-2019 Ford F-59 Commercial Stripped Chassis and 2009-2019 Ford F-53 Motorhome Chassis, this direct-fit catalytic converter also interchanges with OE parts 9U9Z-5E212-A and 7U9Z-5E212-AA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
MagnaFlow 10-11 Camaro 6.2L V8 2.5 inch Competition Series Stainless Catback Performance Exhaust
$1,665.90
$2,290.60
The MagnaFlow Chevrolet Camaro Competition Series 15090 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 6.2L 2010-2013 Chevrolet Camaro with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 5in. Polished Welded-Single Wall-Angle Cut-Rolled Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15090 is engineered to make your vehicle’s engine produce Agressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15090’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2010-2013
Chevrolet
Camaro
SS
MagnaFlow 10-11 Camaro 6.2L V8 2.5 inch Street Series Axle Back Stainless Cat Back Exhaus
$1,218.63
$1,675.61
The MagnaFlow Chevrolet Camaro Street Series 15092 brings enhanced engine sound and dyno-proven performance to your 6.2L 2010-2013 Chevrolet Camaro with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Camaro exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Camaro’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15092 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2010-2013
Chevrolet
Camaro
SS
MagnaFlow 10-11 Camaro 6.2L V8 2.5 inch Street Series Stainless Cat Back Performance Exhaust
$2,043.74
$2,810.15
The MagnaFlow Chevrolet Camaro Street Series 15089 brings out the personality of your 6.2L 2010-2013 Chevrolet Camaro with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips, this Chevrolet Camaro exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Camaro’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15089 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15089 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2010-2013
Chevrolet
Camaro
SS
MagnaFlow 10-11 Camaro 6.2L V8 3 inch Competition Series Stainless Catback Performanc Exhaust
$2,187.00
$3,007.12
The MagnaFlow Chevrolet Camaro Competition Series 16483 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 6.2L 2010-2013 Chevrolet Camaro with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-Double Wall-Angle Cut-Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16483 is engineered to make your vehicle’s engine produce Agressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16483’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.User 1Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2010-2013
Chevrolet
Camaro
SS
MagnaFlow 10-11 Honda CR-V California Catalytic Converter Direct Fit
$1,205.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531781. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2010-2011 Honda CR-V. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to be certified by CARB for legal use in CA/CARB restricted states for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2010-2011
Honda
CR-V
EX
2010-2011
Honda
CR-V
EX-L
2010-2011
Honda
CR-V
LX
2011
Honda
CR-V
SE
MagnaFlow 10-11 Jeep Wrangler 3.8L Direct Fit CARB Compliant Catalytic Converter
$3,172.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551458. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment.This direct-fit catalytic converter is designed specifically for the 2010-2011 Jeep Wrangler. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits:
Year
Make
Model
Submodel
2011
Jeep
Wrangler
70th Anniversary
2010-2011
Jeep
Wrangler
Rubicon
2010-2011
Jeep
Wrangler
Sahara
2010-2011
Jeep
Wrangler
Sport
2011
Jeep
Wrangler
Unlimited 70th Anniversary
2010-2011
Jeep
Wrangler
Unlimited Rubicon
2010-2011
Jeep
Wrangler
Unlimited Sahara
2010-2011
Jeep
Wrangler
Unlimited Sport
2010
Jeep
Wrangler
Unlimited X
2010
Jeep
Wrangler
X
MagnaFlow 10-11 Jeep Wrangler 3.8L OEM Direct-Fit Catalytic Converter
$1,131.00
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-458. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2011 Jeep Wrangler and interchanges with OE parts 6804 0901AB and 6804 0901AA. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits:
Year
Make
Model
Submodel
2011
Jeep
Wrangler
70th Anniversary
2010-2011
Jeep
Wrangler
Rubicon
2010-2011
Jeep
Wrangler
Sahara
2010-2011
Jeep
Wrangler
Sport
2011
Jeep
Wrangler
Unlimited 70th Anniversary
2010-2011
Jeep
Wrangler
Unlimited Rubicon
2010-2011
Jeep
Wrangler
Unlimited Sahara
2010-2011
Jeep
Wrangler
Unlimited Sport
2010
Jeep
Wrangler
Unlimited X
2010
Jeep
Wrangler
X