Our 6'' Basic Systems include steel coilover shock spacers that utilize the stock front coilover shocks for a factory like ride. This system includes our proven IFS technology with extended length ductile iron steering knuckles and arched crossmembers for exceptional suspension ground clearance with a 1/4'' thick differential skid plate, impact struts, heavy duty tie rods, rear add-a-leafs and more.This Part Fits: Year Make Model Submodel 2005-2014 Toyota Tacoma Base 2005-2014 Toyota Tacoma Pre Runner 2005-2013 Toyota Tacoma X-Runner

Our 6'' Basic Systems include steel coilover shock spacers that utilize the stock front coilover shocks for a factory like ride. This system includes our proven IFS technology with extended length ductile iron steering knuckles and arched crossmembers for exceptional suspension ground clearance with a 1/4'' thick differential skid plate, impact struts, heavy duty tie rods, rear add-a-leafs and more. Includes rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2005-2014 Toyota Tacoma Base 2005-2014 Toyota Tacoma Pre Runner 2005-2013 Toyota Tacoma X-Runner

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2005-2013 Toyota Tacoma Base 2005-2013 Toyota Tacoma Pre Runner 2005-2013 Toyota Tacoma X-Runner

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2005-2013 Toyota Tacoma Base 2005-2013 Toyota Tacoma Pre Runner 2005-2013 Toyota Tacoma X-Runner

Our 6'' Performance Systems features our Dirt Logic 2.5 Stainless Steel adjustable coilover shocks providing superior offroad dampening capacity with a good highway ride. This system includes our proven IFS technology with extended length ductile iron steering knuckles and arched crossmembers for exceptional suspension ground clearance with a 1/4'' thick differential skid plate, impact struts, heavy duty tie rods, rear add-a-leafs and more. Includes rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2005-2014 Toyota Tacoma Base 2005-2014 Toyota Tacoma Pre Runner 2005-2013 Toyota Tacoma X-Runner

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2005-2014 Toyota Tacoma Base 2005-2014 Toyota Tacoma Pre Runner 2005-2013 Toyota Tacoma X-Runner

With the success of our Dirt Logic Dual Steering Stabilizers we now offer a remote reservoir design. This system provides increased control for Super Duty's with oversized tires while having the benifit of additional oil and nitrogen capacity in the remote reservoirs.This Part Fits: Year Make Model Submodel 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty Harley-Davidson Edition 2005-2015,2020-2021 Ford F-250 Super Duty King Ranch 2005-2015,2020-2021 Ford F-250 Super Duty Lariat 2020-2021 Ford F-250 Super Duty Limited 2013-2015,2020-2021 Ford F-250 Super Duty Platinum 2005-2015,2020-2021 Ford F-250 Super Duty XL 2005-2015,2020-2021 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty Harley-Davidson Edition 2005-2015,2020-2021 Ford F-350 Super Duty King Ranch 2005-2015,2020-2021 Ford F-350 Super Duty Lariat 2020-2021 Ford F-350 Super Duty Limited 2013-2015,2020-2021 Ford F-350 Super Duty Platinum 2005-2015,2020-2021 Ford F-350 Super Duty XL 2005-2015,2020-2021 Ford F-350 Super Duty XLT

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. This system includes Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2006-2007 Dodge Ram 2500 Laramie 2006-2007 Dodge Ram 2500 Power Wagon 2006-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2006-2007 Dodge Ram 2500 ST 2006-2007 Dodge Ram 2500 TRX4 2006-2007 Dodge Ram 3500 Laramie 2006-2007 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2006-2007 Dodge Ram 3500 ST 2007 Dodge Ram 3500 TRX4

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The system includes Trac Bar bracketry, Pitman Arm, End Link, Bump Stops, and a transmission mount with rear lift coming from a Block and U-bolt system.This Part Fits: Year Make Model Submodel 2006-2007 Dodge Ram 2500 Laramie 2006-2007 Dodge Ram 2500 Power Wagon 2006-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2006-2007 Dodge Ram 2500 ST 2006-2007 Dodge Ram 2500 TRX4 2006-2007 Dodge Ram 3500 Laramie 2006-2007 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2006-2007 Dodge Ram 3500 ST 2007 Dodge Ram 3500 TRX4

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2006-2007 Dodge Ram 2500 Laramie 2006-2007 Dodge Ram 2500 Power Wagon 2006-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2006-2007 Dodge Ram 2500 ST 2006-2007 Dodge Ram 2500 TRX4 2006-2007 Dodge Ram 3500 Laramie 2006-2007 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2006-2007 Dodge Ram 3500 ST 2007 Dodge Ram 3500 TRX4

The best shocks only get better with all new Stainless Steel and Aluminum construction. High grade 304 Stainless Steel shock bodies eclipse all other shocks on the market for maximum corrosion resistance. Each Stainless Steel shock body receives a finely detailed machine finish for a stunning appearance. Dirt Logic Stainless Steel reservoir shocks have been upgraded with black anodized 6061 Aluminum reservoir bodies. This includes both piggyback and remote reservoir shocks. The Aluminum resi construction allows for greater heat dissipation thereby keeping the shock cooler to reduce fade during aggressive offroad use. Finally each Dirt Logic piston rod has been upgraded to a NitroSteel(R) material that is super hard while providing increased corrosion resistance compared to chromed piston rods. Get the finest ride with maximum corrosion resistance only from Dirt Logic shocks. In addition to the specific Dirt Logics for each suspension system, there is also a line of universal Dirt Logic shocks available in reservoir and non-reservoir styles, ranging from 8 to 16 inches of stroke. These universal shocks are sold with universal hardware kits for easy installation. Dirt Logic 2.0 and 2.25 shocks feature urethane bushings in the mounting points to reduce road noise and rattling associated with spherical bearings. Dirt Logic coilover shocks utilize spherical bearings at each end for increased strength along with urethane misalignment cups in the top caps. The misalignment cups keep the road noise transferred through spherical bearings to a minimum. Dirt Logic 2.5 and 4.0 coilover shocks use coil springs made to the highest quality standards possible. All Dirt Logic coils posses the ability to go solid without breaking, settling or bowing. All Dirt Logic coilover shocks come preset with the proper amount of preload so they can be bolted on without any further adjustment necessary. Dirt Logics are available with or without an external reservoir.This Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX4 2011 Ram 1500 Big Horn 2011 Ram 1500 Laramie 2011 Ram 1500 Laramie Longhorn 2011-2012 Ram 1500 Outdoorsman 2011 Ram 1500 SLT 2011 Ram 1500 Sport 2011 Ram 1500 ST 2011 Ram 1500 Tradesman

Dirt Logic 2.5 Resi Coilovers. From our desert racing experience the Dirt Logic 2.5 has been developed for exceptional performance in a variety of Coilover applications. The Dirt Logic 2.5 will provide incredible dampening capacity for aggressive offroad driving. Features: 2.5in OD Stainless Steel Body. 2.25in OD Billet Aluminum Piston. 7/8in NitroSteel Black Piston Rod. Cold Wound Coil Springs. Adjustable Coilover Construction. 5/8in Spherical Ball Mounting Ends. 2.50in OD Aluminum Reservoir w/-8 Stainless Steel O-ring Hose. Extended Length - E27.20. Collasped Length - C21.66. Stroke Length - S5.55 . Top Mount - TP. Bottom Mount - CLV.This Part Fits: Year Make Model Submodel 2006-2010 Dodge Ram 1500 Laramie 2006-2010 Dodge Ram 1500 SLT 2006-2007,2009-2010 Dodge Ram 1500 Sport 2006-2010 Dodge Ram 1500 ST 2008 Dodge Ram 1500 SXT 2006-2007,2009-2010 Dodge Ram 1500 TRX4 2011-2015 Ram 1500 Big Horn 2012-2015 Ram 1500 Express 2011-2015 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2011-2015 Ram 1500 Laramie Longhorn 2015 Ram 1500 Limited 2014-2015 Ram 1500 Lone Star 2011-2015 Ram 1500 Outdoorsman 2015 Ram 1500 Rebel 2011-2015 Ram 1500 SLT 2014-2015 Ram 1500 Special Service 2011-2015 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2015 Ram 1500 Tradesman

Fabtech's Uniball Upper Control Arms are designed for severe duty use with stock and most aftermarket suspension systems. These Arms replace the thin stock upper control arms that are prone to flex and ball joint failure with heavy duty construction designed for aggressive offroad driving. The Dirt Logic 2.5 Stainless Steel Coilover front shocks provide superior damping for rugged offroad use with additional wheel travel when combined with the Uniball Upper Control Arms. Front sway bar relocation bracket are included to provide clearance for the large Dirt Logic 2.5 Coilover Stainless Steel shocks. The rear of the vehicle receives Dirt Logic 2.25 Stainless Steel reservoir shocks. Reservoir shocks are required so that there is no loss of suspension travel due to the large component sizes of the Dirt Logic 2.25 shocks. This high end system will provide outstanding suspension performance with minimal lift for clearance of 33'' tall tires. Replaces upper ball joints with 1'' FK Stainless PTFE Uniballs. Heavy duty upgrade for stock and aftermarket suspensions. No modification to spindle required for installation. Includes Arms, Uniballs, Pins and Misalignments. UCA Tube Specs - .120'' Wall 4130 Chromoly. 1.25'' ODThis Part Fits: Year Make Model Submodel 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Fabtech's Uniball Upper Control Arms are designed for severe duty use with stock and most aftermarket suspension systems. These Arms replace the thin stock upper control arms that are prone to flex and ball joint failure with heavy duty construction designed for aggressive offroad driving. The Dirt Logic 2.50 Coilover front shocks provide superior damping for rugged offroad use with additional wheel travel when combined with the Uniball Upper Control Arms. Front sway bar relocation bracket are included to provide clearance for the large Dirt Logic 2.5 Coilover shocks. The rear of the vehicle receives Dirt Logic 2.25 reservoir shocks. Reservoir shocks are required so that there is no loss of suspension travel due to the large component sizes of the Dirt Logic 2.25 shocks. This high end system will provide outstanding suspension performance with minimal lift for clearance of 33'' tall tires. Form and Function - Replaces upper ball joints with 1'' FK Stainless PTFE Uniballs - Heavy duty upgrade for stock and aftermarket suspensions - No modification to spindle required for installation - Includes Arms, Uniballs, Pins, Misalignments Dirt Logic Shocks - UCA Tube Specs - .120'' Wall 4130 Chromoly. 1.25'' ODThis Part Fits: Year Make Model Submodel 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Fabtech's FJ system features extended length steering knuckles attaching to one piece lower control arm crossmembers for a full 6 inches of lift to clear 35in tires. Front lower crossmembers feature adjustable alignment cams along with an integrated 1/4'' thick steel differential skid plate. The Basic system retains the front strut assembly for a smooth highway ride with ease of installation. The rear suspension system includes tubular upper and lower link arms, utilizing the stock rear coil springs for a supple highway ride with excellent offroad articulation. Installation does not require relocation of the Rack and Pinion or disassembly of the front strut assemblies. The stock front and rear driveshafts are retained due to Fabtech's precise suspension geometry. Includes rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Fabtech's FJ system features extended length steering knuckles attaching to one piece lower control arm crossmembers for a full 6 inches of lift to clear 35'' tires. Front lower crossmembers feature adjustable alignment cams along with an integrated 1/4'' thick steel differential skid plate. The Basic system retains the front strut assembly for a smooth highway ride with ease of installation. The Basic rear suspension systems include tubular upper and lower link arms, utilizing the stock rear coil springs for a supple highway ride with excellent offroad articulation. Installation does not require relocation of the Rack and Pinion or disassembly of the front strut assemblies. The stock front and rear driveshafts are retained due to Fabtech's precise suspension geometry.This Part Fits: Year Make Model Submodel 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

The best shocks only get better with all new Stainless Steel and Aluminum construction. High grade 304 Stainless Steel shock bodies eclipse all other shocks on the market for maximum corrosion resistance. Each Stainless Steel shock body receives a finely detailed machine finish for a stunning appearance. Dirt Logic Stainless Steel reservoir shocks have been upgraded with black anodized 6061 Aluminum reservoir bodies. This includes both piggyback and remote reservoir shocks. The Aluminum resi construction allows for greater heat dissipation thereby keeping the shock cooler to reduce fade during aggressive offroad use. Finally each Dirt Logic piston rod has been upgraded to a NitroSteel(R) material that is super hard while providing increased corrosion resistance compared to chromed piston rods. Get the finest ride with maximum corrosion resistance only from Dirt Logic shocks. In addition to the specific Dirt Logics for each suspension system, there is also a line of universal Dirt Logic shocks available in reservoir and non-reservoir styles, ranging from 8 to 16 inches of stroke. These universal shocks are sold with universal hardware kits for easy installation. Dirt Logic 2.0 and 2.25 shocks feature urethane bushings in the mounting points to reduce road noise and rattling associated with spherical bearings. Dirt Logic coilover shocks utilize spherical bearings at each end for increased strength along with urethane misalignment cups in the top caps. The misalignment cups keep the road noise transferred through spherical bearings to a minimum. Dirt Logic 2.5 and 4.0 coilover shocks use coil springs made to the highest quality standards possible. All Dirt Logic coils posses the ability to go solid without breaking, settling or bowing. All Dirt Logic coilover shocks come preset with the proper amount of preload so they can be bolted on without any further adjustment necessary. Dirt Logics are available with or without an external reservoir.This Part Fits: Year Make Model Submodel 2010-2020 Toyota 4Runner Limited 2020 Toyota 4Runner Nightshade 2010-2020 Toyota 4Runner SR5 2018-2020 Toyota 4Runner SR5 Premium 2010-2016 Toyota 4Runner Trail 2017-2020 Toyota 4Runner TRD Off-Road 2018-2020 Toyota 4Runner TRD Off-Road Premium 2018-2020 Toyota 4Runner TRD Pro 2020 Toyota 4Runner Venture 2007-2013 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition 2005-2013 Toyota Tacoma Pre Runner

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2007-2008 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Fabtech's FJ system features extended length steering knuckles attaching to one piece lower control arm crossmembers for a full 6 inches of lift to clear 35'' tires. Front lower crossmembers feature adjustable alignment cams along with an integrated 1/4'' thick steel differential skid plate. The Basic system retains the front strut assembly for a smooth highway ride with ease of installation. The Performance system includes Fabtech's Dirt Logic 2.5 Coilover shocks, replacing the stock front strut assemblies. Both the Basic and Performance rear suspension systems include tubular upper and lower link arms, utilizing the stock rear coil springs for a supple highway ride with excellent offroad articulation. Installation does not require relocation of the Rack and Pinion or disassembly of the front strut assemblies. The stock front and rear driveshafts are retained due to Fabtech's precise suspension geometry.This Part Fits: Year Make Model Submodel 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Fabtech's FJ system features extended length steering knuckles attaching to one piece lower control arm crossmembers for a full 6 inches of lift to clear 35in tires. Front lower crossmembers feature adjustable alignment cams along with an integrated 1/4'' thick steel differential skid plate. The Performance system includes Fabtech's Dirt Logic 2.5 Stainless Steel Coilover shocks, replacing the stock front strut assemblies. The rear suspension system includes tubular upper and lower link arms, utilizing the stock rear coil springs for a supple highway ride with excellent offroad articulation. Installation does not require relocation of the Rack and Pinion or disassembly of the front strut assemblies. The stock front and rear driveshafts are retained due to Fabtech's precise suspension geometry. Includes rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. This system includes Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2007-2008 Dodge Ram 2500 Laramie 2007-2008 Dodge Ram 2500 Power Wagon 2007-2008 Dodge Ram 2500 SLT 2007 Dodge Ram 2500 Sport 2007-2008 Dodge Ram 2500 ST 2008 Dodge Ram 2500 SXT 2007 Dodge Ram 2500 TRX4 2007-2008 Dodge Ram 3500 Laramie 2007-2008 Dodge Ram 3500 SLT 2007 Dodge Ram 3500 Sport 2007-2008 Dodge Ram 3500 ST 2008 Dodge Ram 3500 SXT 2007 Dodge Ram 3500 TRX4

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift options include replacement Coil Springs or our Dirt Logic 4.0 Coilover Conversion system. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The Coilover Conversion features our Dirt Logic 4.0 for maximum suspension dampening in rugged offroad conditions. The conversion system does not require elimination of the factory coil spring bucket and is a 100% bolt on installation. The vehicle specific Dirt Logic 4.0 Coilovers features a 4'' OD remote reservoir connected via -10 hose assembly and includes large billet reservoir clamps and limiting straps. As an upgrade to the Coilover Conversion we offer an optional front Dirt Logic Hydraulic Bumps Stop system that aids in compression dampening for severe offroad driving. Both systems include Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system.This Part Fits: Year Make Model Submodel 2007-2008 Dodge Ram 2500 Laramie 2007-2008 Dodge Ram 2500 Power Wagon 2007-2008 Dodge Ram 2500 SLT 2007 Dodge Ram 2500 Sport 2007-2008 Dodge Ram 2500 ST 2008 Dodge Ram 2500 SXT 2007 Dodge Ram 2500 TRX4 2007-2008 Dodge Ram 3500 Laramie 2007-2008 Dodge Ram 3500 SLT 2007 Dodge Ram 3500 Sport 2007-2008 Dodge Ram 3500 ST 2008 Dodge Ram 3500 SXT 2007 Dodge Ram 3500 TRX4

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift options include replacement Coil Springs or our Dirt Logic 4.0 Coilover Conversion system. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The Coilover Conversion features our Dirt Logic 4.0 for maximum suspension dampening in rugged offroad conditions. The conversion system does not require elimination of the factory coil spring bucket and is a 100% bolt on installation. The vehicle specific Dirt Logic 4.0 Coilovers features a 4'' OD remote reservoir connected via -10 hose assembly and includes large billet reservoir clamps and limiting straps. As an upgrade to the Coilover Conversion we offer an optional front Dirt Logic Hydraulic Bumps Stop system that aids in compression dampening for severe offroad driving. Both systems include Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system.This Part Fits: Year Make Model Submodel 2007-2008 Dodge Ram 2500 Laramie 2007-2008 Dodge Ram 2500 Power Wagon 2007-2008 Dodge Ram 2500 SLT 2007 Dodge Ram 2500 Sport 2007-2008 Dodge Ram 2500 ST 2008 Dodge Ram 2500 SXT 2007 Dodge Ram 2500 TRX4 2007-2008 Dodge Ram 3500 Laramie 2007-2008 Dodge Ram 3500 SLT 2007 Dodge Ram 3500 Sport 2007-2008 Dodge Ram 3500 ST 2008 Dodge Ram 3500 SXT 2007 Dodge Ram 3500 TRX4

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Includes front and rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

Arms eliminate upper ball joint w/ super strong 1" ID Stainless American Uniball - Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments - Allows for increased wheel travel when used with Dirt Logic 2.5 Coilover shocks - Chromoly tubing reduces flex found in stock arms for more positive road feel - 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature - Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Material Construction Specs. - Built with same materials as found on Trophy Trucks - .120" Wall 4130 Chromoly Tubing. 1.50" OD. - .250" wall DOM Bushing Barrels - 1" ID Stainless Steel American Uniball - 17-4 Stainless Misalignments - Heat Treated 17-4 Stainless Steel Tapered Uniball Pins.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2014-2018 GMC Sierra 1500 Base 2011-2013,2015-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

Arms eliminate upper ball joint w/ super strong 1'' ID Stainless American Uniball - Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments - Allows for increased wheel travel when used with Dirt Logic 2.5 Resi Coilover shocks - Chromoly tubing reduces flex found in stock arms for more positive road feel - 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature - Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Material Construction Specs - Built with same materials as found on Trophy Trucks - .120'' Wall 4130 Chromoly Tubing. 1.50'' OD. - .250'' wall DOM Bushing Barrels - 1'' ID Stainless Steel American Uniball - 17-4 Stainless Misalignments - Heat Treated 17-4 Stainless Steel Tapered Uniball Pins NOTE- Before ordering visually check your vehicle's factory suspension for aluminum or steel version. This system will only fit factory steel suspension vehicles.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013,2015-2018 Chevrolet Silverado 1500 LS 2007-2018 Chevrolet Silverado 1500 LT 2007-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2007-2018 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2007 Chevrolet Silverado 1500 HD Classic LT 2014-2018 GMC Sierra 1500 Base 2007-2018 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2018 GMC Sierra 1500 SLE 2007-2018 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2007 GMC Sierra 1500 HD Classic SLE 2007 GMC Sierra 1500 HD Classic SLT

Our 6in Suspension systems for the T900 platform uses our industry leading crossmember and spindle technology. Fabtech pushes the envelope with superior ride height to properly clear 35in tall tires. Extensive design work was given to the extended length steering knuckles to keep the track width near stock with superior turning radius for maneuverability in tight spots. Lower control arm crossmembers are strengthened with cross tubes backed up by tubular frame struts to distribute front suspension impact loads. The front differential is protected with a tightly formed 1/4in thick steel skid plate. Rear suspension lift is accomplished via a block and add a leaf system.With two systems available, the Basic system features all the above componentry with a front coilover spacer system utilizing the factory coilover assembly for a stock like ride. The Performance system also offers the same componentry but with an upgrade to the Dirt Logic 2.5 or Dirt Logic 4.0 Adjustable Coilover shock in place of the factory front coilover assembly. Rear shock options include Performance shocks or Dirt Logic 2.25 shocks. Both systems have been properly designed to work with the factory Stabilitrak safety functions without reprogramming the vehicle's computer.This Part Fits: Year Make Model Submodel 2012-2013 Chevrolet Silverado 1500 Hybrid 2008-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2011-2013 GMC Sierra 1500 Denali 2012-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

Our 6in Suspension systems for the T900 platform uses our industry leading crossmember and spindle technology. Fabtech pushes the envelope with superior ride height to properly clear 35in tall tires. Extensive design work was given to the extended length steering knuckles to keep the track width near stock with superior turning radius for maneuverability in tight spots. Lower control arm crossmembers are strengthened with cross tubes backed up by tubular frame struts to distribute front suspension impact loads. The front differential is protected with a tightly formed 1/4in thick steel skid plate. Rear suspension lift is accomplished via a block and add a leaf system.With two systems available, the Basic system features all the above componentry with a front coilover spacer system utilizing the factory coilover assembly for a stock like ride. The Performance system also offers the same componentry but with an upgrade to the Dirt Logic 2.5 or Dirt Logic 4.0 Adjustable Coilover shock in place of the factory front coilover assembly. Rear shock options include Performance shocks, Stealth or Dirt Logic 2.25 shocks. Both systems have been properly designed to work with the factory Stabilitrak safety functions without reprogramming the vehicle's computer.This Part Fits: Year Make Model Submodel 2012-2013 Chevrolet Silverado 1500 Hybrid 2008-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2011-2013 GMC Sierra 1500 Denali 2012-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

6in Performance Suspension. Integrated Lower Control Arm Crossmembers includes Differential Skid Plate. Offset Ductile Iron Steering knuckles retain stock like track width. Includes crossmember cross tubes and impact struts to distribute front suspension impact loads through frame. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks. Systems compatible with factory Stabilitrak models. Rack and Pinion is retained in stock positionThis Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2011-2013 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

Our 6in Suspension systems for the T900 platform uses our industry leading crossmember and spindle technology. Fabtech pushes the envelope with superior ride height to properly clear 35in tall tires. Extensive design work was given to the extended length steering knuckles to keep the track width near stock with superior turning radius for maneuverability in tight spots. Lower control arm crossmembers are strengthened with cross tubes backed up by tubular frame struts to distribute front suspension impact loads. The front differential is protected with a tightly formed 1/4in thick steel skid plate. Rear suspension lift is accomplished via a block and add-a-leaf system. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks. This system has been properly designed to work with the factory Stabilitrak safety functions without reprogramming the vehicle's computer.This Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2011-2013 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

The best shocks only get better with all new Stainless Steel and Aluminum construction. High grade 304 Stainless Steel shock bodies eclipse all other shocks on the market for maximum corrosion resistance. Each Stainless Steel shock body receives a finely detailed machine finish for a stunning appearance. Dirt Logic Stainless Steel reservoir shocks have been upgraded with black anodized 6061 Aluminum reservoir bodies. This includes both piggyback and remote reservoir shocks. The Aluminum resi construction allows for greater heat dissipation thereby keeping the shock cooler to reduce fade during aggressive offroad use. Finally each Dirt Logic piston rod has been upgraded to a NitroSteel(R) material that is super hard while providing increased corrosion resistance compared to chromed piston rods. Get the finest ride with maximum corrosion resistance only from Dirt Logic shocks. In addition to the specific Dirt Logics for each suspension system, there is also a line of universal Dirt Logic shocks available in reservoir and non-reservoir styles, ranging from 8 to 16 inches of stroke. These universal shocks are sold with universal hardware kits for easy installation. Dirt Logic 2.0 and 2.25 shocks feature urethane bushings in the mounting points to reduce road noise and rattling associated with spherical bearings. Dirt Logic coilover shocks utilize spherical bearings at each end for increased strength along with urethane misalignment cups in the top caps. The misalignment cups keep the road noise transferred through spherical bearings to a minimum. Dirt Logic 2.5 and 4.0 coilover shocks use coil springs made to the highest quality standards possible. All Dirt Logic coils posses the ability to go solid without breaking, settling or bowing. All Dirt Logic coilover shocks come preset with the proper amount of preload so they can be bolted on without any further adjustment necessary. Dirt Logics are available with or without an external reservoir.This Part Fits: Year Make Model Submodel 2014-2015 Chevrolet Silverado 1500 High Country 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013,2015 Chevrolet Silverado 1500 LS 2007-2015 Chevrolet Silverado 1500 LT 2007-2015 Chevrolet Silverado 1500 LTZ 2015 Chevrolet Silverado 1500 SSV 2007-2015 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2007 Chevrolet Silverado 1500 HD Classic LT 2014-2015 GMC Sierra 1500 Base 2007-2015 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2015 GMC Sierra 1500 SLE 2007-2015 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2007 GMC Sierra 1500 HD Classic SLE 2007 GMC Sierra 1500 HD Classic SLT

Our 6in Suspension systems for the T900 platform uses our industry leading crossmember and spindle technology. Fabtech pushes the envelope with superior ride height to properly clear 35in tall tires. Extensive design work was given to the extended length steering knuckles to keep the track width near stock with superior turning radius for maneuverability in tight spots. Lower control arm crossmembers are strengthened with cross tubes backed up by tubular frame struts to distribute front suspension impact loads. The front differential is protected with a tightly formed 1/4in thick steel skid plate. Rear suspension lift is accomplished via a block and add-a-leaf system. The Basic system features all the above componentry with a front coilover spacer system utilizing the factory coilover assembly for a stock like ride. This system has been properly designed to work with the factory Stabilitrak safety functions without reprogramming the vehicle's computer.This Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT

Our 6in Suspension systems for the T900 platform uses our industry leading crossmember and spindle technology. Fabtech pushes the envelope with superior ride height to properly clear 35in tall tires. Extensive design work was given to the extended length steering knuckles to keep the track width near stock with superior turning radius for maneuverability in tight spots. Lower control arm crossmembers are strengthened with cross tubes backed up by tubular frame struts to distribute front suspension impact loads. The front differential is protected with a tightly formed 1/4in thick steel skid plate. Rear suspension lift is accomplished via a block and add-a-leaf system. The Basic system features all the above componentry with a front coilover spacer system utilizing the factory coilover assembly for a stock like ride. This system has been properly designed to work with the factory Stabilitrak safety functions without reprogramming the vehicle's computer.This Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Silverado 1500 Hybrid 2008-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2009-2013 GMC Sierra 1500 Hybrid 2008-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT