Over $1,000

Additional Attributes: GTIN: 00674866094116 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 47 x 47 x 5 inches

Obtain 3.5in of front end lift without changing the front leaf springs. The super stout spring hangers replace the factory units without welding or cutting. Excursion models will require a 2in rear block kit to level off the ride height. 2001-05 Excursion systems include replacement front frame crossmember and bumper brackets. Additional Attributes: GTIN: 00674866024502 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 36.5 x 25.12 x 11.6 inches

This system features our Performance shock absorber with a replacement coil spring and adjustable coil seat and Dirt Logic 2.25 Stainless Steel rear shocks for a good highway and offroad ride. Additional Attributes: GTIN: 00674866097834 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 32 x 16.4 x 15 inches

Built for aggressive offroad driving, this kit features 2.5 Dirt Logic Stainless Steel coil over shocks with height adjustability coming from the threaded body and performance coil spring. Offroad dampening capacity is so superior with this coilover we caution drivers to not drive past the limits of the stock components of the vehicle. Includes rear 2.25 Dirt Logic Stainless Steel shocks. Additional Attributes: GTIN: 00674866097841 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 35.75 x 17.75 x 15.13 inches

Utilizing the vehicle's stock I beams and radius arms the heavy duty 1/4'' thick brackets relocate these components with extended length coil springs for increased ride height and proper front suspension geometry. System includes heavy duty brackets, drop pitman arm, front and rear performance shocks and a rear block kit. Additional Attributes: GTIN: 00674866025974 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 42.12 x 16 inches

Utilizing the vehicle's stock I beams and radius arms the heavy duty 1/4'' thick brackets relocate these components with extended length coil springs for increased ride height and proper front suspension geometry. System includes heavy duty brackets, drop pitman arm, front and rear performance shocks and a rear block kit. Additional Attributes: GTIN: 00674866025998 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 42.12 x 16 inches

Utilizing the vehicle's stock I beams and radius arms the heavy duty 1/4'' thick brackets relocate these components with extended length coil springs for increased ride height and proper front suspension geometry. System includes heavy duty brackets, drop pitman arm, front and rear Stealth shocks and a rear block kit. Additional Attributes: GTIN: 00674866092099 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 42.12 x 16 inches

Utilizing the vehicle's stock I beams and radius arms the heavy duty 1/4'' thick brackets relocate these components with extended length coil springs for increased ride height and proper front suspension geometry. System includes heavy duty brackets, drop pitman arm, front and rear Stealth shocks and a rear block kit. Additional Attributes: GTIN: 00674866092112 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 42.12 x 16 inches

Obtain 3.5'' of front end lift without changing the front leaf springs. The super stout spring hangers replace the factory units without welding or cutting. The system includes replacement front frame crossmember and bumper brackets. Additional Attributes: GTIN: 00674866024427 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 36.5 x 19.52 x 11.6 inches

Additional Attributes: GTIN: 00674866008649 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 25 x 22 x 12.5 inches

The 8in Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4in thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37in tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2in add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Includes front and rear 2.25 Dirt Logic Stainless Steel shocks. Additional Attributes: GTIN: 00674866095601 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 45.5 x 50.52 x 22 inches

The 8in Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4in thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37in tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Additional Attributes: GTIN: 00674866023437 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 45.5 x 45.04 x 22 inches

The 8in Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4in thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37in tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Additional Attributes: GTIN: 00674866091221 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 45.5 x 45.04 x 22 inches

Additional Attributes: GTIN: 00674866008656 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 45.5 x 14.5 x 13 inches

Additional Attributes: GTIN: 00674866008663 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 42.5 x 11.5 x 7.02 inches

Additional Attributes: GTIN: 00674866008595 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 25 x 22 x 12.5 inches