Add power, sound and taste to your Accord with this Takeda axle-back system. 2-1/4" to 1-3/4" mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +7 HP and +7 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.This Part Fits: Year Make Model Submodel 2013-2017 Honda Accord EX-L 2013-2017 Honda Accord Sport 2017 Honda Accord Sport Special Edition 2013-2017 Honda Accord Touring

This axle-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a smooth sound. Finishing off this exhaust system are dual 5 IN diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a smooth sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This system incorporates a factory style exhaust valve which use the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. A mitered merge is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2023 Hyundai Elantra N Base

Power, sound and good looks is what this Takeda axle-back exhaust delivers. Power gains of up to +7 horsepower and +10 lbs. x ft. torque as shown on our in-house dyno. 3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash the sound and performance of your RS. The high flow, stainless steel muffler is finished in high temp, metallic black powder coating for long lasting good looks. Dual 4 1/2" stainless steel exhaust tips with laser etched Takeda brand logo for a custom finish.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Ford Focus RS

Power, sound and good looks is what this Takeda axle-back exhaust delivers. Power gains of up to +7 horsepower and +10 lbs. x ft. torque as shown on our in-house dyno. 3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash the sound and performance of your RS. The high flow, stainless steel muffler is finished in high temp, metallic black powder coating for long lasting good looks. Dual 4 1/2" stainless steel exhaust tips with laser etched Takeda brand logo for a custom finish.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Ford Focus RS

aFe is proud to introduce the new Takeda Axle Back Exhaust System for the 2013-2016 Honda Accord Sport Sedan L4-2.4L. In recent testing this system produced 7 horsepower and 7 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 2.25in tubing that merges into dual 1.75in tubing which improves performance across the power band while maintaining a great tone. TIG-welded and brushed finish mandrel bent 304 stainless steel for maximum strength and durability, this system is equipped with dual high flow, polished mufflers for maximum flow and performance. To finish off this exhaust are dual laser etched, double wall, angle cut 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 Honda Accord EX 2013-2017 Honda Accord EX-L 2013-2016 Honda Accord LX 2013-2016 Honda Accord LX-S 2013-2017 Honda Accord Sport 2017 Honda Accord Sport Special Edition 2013-2017 Honda Accord Touring

Flow and Performance:This Takeda exhaust system is constructed of 2-1/2" mandrel bent 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2020,2022-2024 Subaru BRZ Limited 2013-2019,2022-2024 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020,2024 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition 2023 Toyota GR86 10th Anniversary Special Edition 2022-2024 Toyota GR86 Base 2022-2024 Toyota GR86 Premium 2024 Toyota GR86 TRUENO Edition

Flow and Performance: This Takeda exhaust system is constructed of 2-1/2" mandrel bent 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2020,2022-2024 Subaru BRZ Limited 2013-2019,2022-2024 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020,2024 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition 2023 Toyota GR86 10th Anniversary Special Edition 2022-2024 Toyota GR86 Base 2022-2024 Toyota GR86 Premium 2024 Toyota GR86 TRUENO Edition

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2017 Honda Accord EX-L 2016-2017 Honda Accord Touring

Takeda-ST 3 IN 304 Stainless Steel Axle-Back Exhaust System w/ Black Tips Hyundai Veloster N 19-20 L4-2.0L (t)Installation InstructionsThis Part Fits: Year Make Model Submodel 2019-2021 Hyundai Veloster N Base

Takeda-ST 3 IN 304 Stainless Steel Axle-Back Exhaust System w/ Polished Tips Hyundai Veloster N 19-20 L4-2.0L (t)Installation InstructionsThis Part Fits: Year Make Model Submodel 2019-2021 Hyundai Veloster N Base

This axle-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a smooth sound. Finishing off this exhaust system are dual 5 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a smooth sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This system incorporates a factory style exhaust valve which use the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. A mitered merge is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2023 Hyundai Elantra N Base

High friction pads increase stopping powerSteel staggered pistons in order to ensure even pad wearStainless steel pistons as standard for improved resistance to thermal conductivityPin mounted pads for quicker and easier pad changeThis Part Fits: Year Make Model Submodel 2020 Nissan GT-R 50th Anniversary Edition 2009-2010 Nissan GT-R Base 2012-2016 Nissan GT-R Black Edition 2015-2021 Nissan GT-R Nismo 2009-2021 Nissan GT-R Premium 2018-2019 Nissan GT-R Pure 2021 Nissan GT-R T-spec 2014-2015,2018-2020 Nissan GT-R Track Edition

High friction pads increase stopping powerSteel staggered pistons in order to ensure even pad wearStainless steel pistons as standard for improved resistance to thermal conductivityPin mounted pads for quicker and easier pad changeThis Part Fits: Year Make Model Submodel 2020 Nissan GT-R 50th Anniversary Edition 2009-2010 Nissan GT-R Base 2012-2016 Nissan GT-R Black Edition 2015-2021 Nissan GT-R Nismo 2009-2021 Nissan GT-R Premium 2018-2019 Nissan GT-R Pure 2021 Nissan GT-R T-spec 2014-2015,2018-2020 Nissan GT-R Track Edition

High friction pads increase stopping powerSteel staggered pistons in order to ensure even pad wearStainless steel pistons as standard for improved resistance to thermal conductivityPin mounted pads for quicker and easier pad changeThis Part Fits: Year Make Model Submodel 2020 Nissan GT-R 50th Anniversary Edition 2009-2010 Nissan GT-R Base 2012-2016 Nissan GT-R Black Edition 2015-2021 Nissan GT-R Nismo 2009-2021 Nissan GT-R Premium 2018-2019 Nissan GT-R Pure 2021 Nissan GT-R T-spec 2014-2015,2018-2020 Nissan GT-R Track Edition

High friction pads increase stopping powerSteel staggered pistons in order to ensure even pad wearStainless steel pistons as standard for improved resistance to thermal conductivityPin mounted pads for quicker and easier pad changeThis Part Fits: Year Make Model Submodel 2020 Nissan GT-R 50th Anniversary Edition 2009-2010 Nissan GT-R Base 2012-2016 Nissan GT-R Black Edition 2015-2021 Nissan GT-R Nismo 2009-2021 Nissan GT-R Premium 2018-2019 Nissan GT-R Pure 2021 Nissan GT-R T-spec 2014-2015,2018-2020 Nissan GT-R Track Edition

High friction pads increase stopping powerSteel staggered pistons in order to ensure even pad wearStainless steel pistons as standard for improved resistance to thermal conductivityPin mounted pads for quicker and easier pad changeThis Part Fits: Year Make Model Submodel 2020 Nissan GT-R 50th Anniversary Edition 2009-2010 Nissan GT-R Base 2012-2016 Nissan GT-R Black Edition 2015-2021 Nissan GT-R Nismo 2009-2021 Nissan GT-R Premium 2018-2019 Nissan GT-R Pure 2021 Nissan GT-R T-spec 2014-2015,2018-2020 Nissan GT-R Track Edition

High friction pads increase stopping powerSteel staggered pistons in order to ensure even pad wearStainless steel pistons as standard for improved resistance to thermal conductivityPin mounted pads for quicker and easier pad changeThis Part Fits: Year Make Model Submodel 2020 Nissan GT-R 50th Anniversary Edition 2009-2010 Nissan GT-R Base 2012-2016 Nissan GT-R Black Edition 2015-2021 Nissan GT-R Nismo 2009-2021 Nissan GT-R Premium 2018-2019 Nissan GT-R Pure 2021 Nissan GT-R T-spec 2014-2015,2018-2020 Nissan GT-R Track Edition

The world's premier traction aid, an ARB Air Locker(TM) keep you moving in all conditions. With the flick of the switch an Air Locker gives instant lock at any moment and its super strong design allows activation at any speed allowing you to tackle the toughest terrain. The advantage of the Air Locker lies in the pneumatically operated locking system inside the differential. When activated, the Air Locker prevents the internal differential gears from rotating and therefore prevents the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates like a conventional open differential. An Air Locker equipped vehicle can be driven in a slower, safer and more controlled manner, greatly reducing the likelihood of vehicle damage and environmental impact.Product Specifications SheetWarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 1998-1999 Mitsubishi Montero Base 1995-1997 Mitsubishi Montero LS 1995-1997 Mitsubishi Montero SR 1997-2003 Mitsubishi Montero Sport ES 1999-2003 Mitsubishi Montero Sport Limited 1997-2004 Mitsubishi Montero Sport LS 1997-2004 Mitsubishi Montero Sport XLS 2001 Mitsubishi Montero Sport XS

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.Warranty

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.Installation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 1984-1985 Toyota 4Runner DLX 1984-1985 Toyota 4Runner SR5 1984-1985 Toyota Pickup Base 1984-1985 Toyota Pickup DLX 1985 Toyota Pickup DLX Turbo 1984-1985 Toyota Pickup SR5 1985 Toyota Pickup SR5 Turbo

Beginning after the secondary catalyst, the Touring Edition picks up right before the rear axle and provides a full single 3” route from this point and splits to dual patented drone-canceling 180 Technology™ resonators, followed by 3” tip outlets. Given the straight-through design and lack of packing material, the 180 Technology® resonators’ job is to defeat drone prone frequencies that would otherwise be experienced within the cabin. Maximum flow is maintained and exterior volume is increased with the interior experience being much more sophisticated and tame. The package is completed with dual 4.5” slash-cut, double-walled tips, available in chrome silver or diamond black. Crafted in PA, USA, from US-sourced .065”-wall T304L stainless steel, every aspect is meticulously engineered, designed, and manufactured in-house at AWE. Backed by AWE's Lifetime Warranty, No CEL Light Guarantee, and Perfect Fitment Guarantee.We recommend the following configurations--330i: if you plan to upgrade anything further upstream, we recommend the Touring Editon. If you're keeping everything stock, note the Touring Edition will resemble stock from within the cabin on the 330i sedan, and you should consider the Track Edition. 430i: Given the coupe design of the 430i, interior acoustics differ when compared to its sedan sibling, with new frequencies making their way into cabin. Due to this, and with all factory emissions equipment in place, we recommend equipping the Touring Edition to ensure an enjoyable driving experience. Drivers can, of course, equip a Track Edition, but it may be much for some, especially if anything upstream has been changed. You’ve been warned.Installation InstructionsDatasheetThis Part Fits: Year Make Model Submodel 2019-2024 BMW 330i Base 2019-2024 BMW 330i xDrive Base 2021-2024 BMW 430i Base 2021-2024 BMW 430i xDrive Base

Beginning after the secondary catalyst, the Touring Edition picks up right before the rear axle and provides a full single 3” route from this point and splits to dual patented drone-canceling 180 Technology™ resonators, followed by 3” tip outlets. Given the straight-through design and lack of packing material, the 180 Technology® resonators’ job is to defeat drone prone frequencies that would otherwise be experienced within the cabin. Maximum flow is maintained and exterior volume is increased with the interior experience being much more sophisticated and tame. The package is completed with dual 4.5” slash-cut, double-walled tips, available in chrome silver or diamond black. Crafted in PA, USA, from US-sourced .065”-wall T304L stainless steel, every aspect is meticulously engineered, designed, and manufactured in-house at AWE. Backed by AWE's Lifetime Warranty, No CEL Light Guarantee, and Perfect Fitment Guarantee.We recommend the following configurations--330i: if you plan to upgrade anything further upstream, we recommend the Touring Editon. If you're keeping everything stock, note the Touring Edition will resemble stock from within the cabin on the 330i sedan, and you should consider the Track Edition. 430i: Given the coupe design of the 430i, interior acoustics differ when compared to its sedan sibling, with new frequencies making their way into cabin. Due to this, and with all factory emissions equipment in place, we recommend equipping the Touring Edition to ensure an enjoyable driving experience. Drivers can, of course, equip a Track Edition, but it may be much for some, especially if anything upstream has been changed. You’ve been warned.Installation InstructionsDatasheetThis Part Fits: Year Make Model Submodel 2019-2024 BMW 330i Base 2019-2024 BMW 330i xDrive Base 2021-2024 BMW 430i Base 2021-2024 BMW 430i xDrive Base

AWE Tuning 05-07 C6 Chevrolet Corvette 6.0L Touring Edition Axleback Exhaust w/ Chrome Silver TipsThis Part Fits: Year Make Model Submodel 2005-2008 Chevrolet Corvette Base

AWE Tuning 05-07 C6 Chevrolet Corvette 6.0L Touring Edition Axleback Exhaust w/ Diamond Black Tips

AWE Tuning 05-07 C6 Chevrolet Corvette 6.0L Track Edition Axleback Exhaust w/ Chrome Silver Tips

AWE Tuning 05-07 C6 Chevrolet Corvette 6.0L Track Edition Axleback Exhaust w/ Diamond Black Tips

AWE Tuning 09-13 Chevrolet Corvette 6.2L Touring Edition Axle-back Exhaust w/ Chrome Silver TipsThis Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport

AWE Tuning 09-13 Chevrolet Corvette 6.2L Touring Edition Axle-back Exhaust w/ Diamond Black TipsThis Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport

AWE Tuning 09-13 Chevrolet Corvette 6.2L Track Edition Axle-back Exhaust w/ Chrome Silver TipsThis Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport

AWE Tuning 09-13 Chevrolet Corvette 6.2L Track Edition Axle-back Exhaust w/ Diamond Black TipsThis Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport

Raw, rowdy, and lightweight. The AWE Track Edition Axle Back is the perfect dose of steel for drivers looking for the loudest of the lot. Retaining the 3” diameter T304L stainless steel construction, the Track Edition Axle Back mirrors all of the precision engineering and perfect fitment found in its Touring Edition counterpart, minus the 180 Technology®. Instead, the Track Edition features straight pipe sections to deliver the thunder. The C7 Track Edition Exhaust is not for the faint of heart, and for this reason, Track Edition Exhausts cannot be returned based on sound preference. Choose your weapon wisely. If you're running the Track Edition and want to tone it down, we made it easy to convert catbacks from a Track Edition to a Touring Edition with our Conversion Kits. Easy! AWE includes our AFM Valve Simulators (required for the Corvette Stingray / Z51 Auto / Z51 Manual (2014-2016) / Grand Sport Auto) in every kit. The AFM Valve Simulators provide a worry-free solution for removing AFM valves from the exhaust route without causing a check engine light. They flaunt CNC laser-cut T304 stainless steel construction, and are a direct bolt-on to factory AFM valve motors. Simply remove the AFM valve motors from the factory exhaust, bolt them onto the AWE AFM Valve Simulator, and secure them safely to the vehicle. Once installed, the AFM valve motors will retain their factory operation, and keep your car’s ECU happy. Vehicles without AFM valves do not need to use the AFM Valve Simulators. All tip options are 4.5” slash-cut, and include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1

Thanks to AWE’s drone-canceling 180 Technology® and countless hours of R&D, we were able to craft a system for the SQ5 that enables perfect part throttle cruising when you want it, and a disobedient soundtrack when you're feeling a bit more… aggressive. In other words, the AWE SQ5 Touring Edition Exhaust is the best of both worlds: SQ5. Unlocked: Featuring AWE’s drone-canceling solution: 180 Technology® Engineered around the SQ5’s specific Tiptronic tuning Direct bolt-on Gains of 8 hp and 9 lb-ft of torque to the crank X-Pipe for enhanced exhaust scavenging and improved tone Available with chrome silver or diamond black adjustable quad outlet 102mm tips Crafted from 2.5” T304L stainless steel No CEL Guarantee Fitment Guarantee Lifetime Exhaust Warranty Since there is no independent control of the valves (except “Sport” mode which changes a number of other things), the AWE 180 Technology equipped exhaust responds to driver inputs seamlessly, removing the need for valving. 180 Technology® is not the standard, typical approach to performance exhaust design.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1

A straight-through design, the AWE Touring Edition Axleback is a 3” T304L stainless steel configuration featuring AWE’s proprietary, drone-canceling solution, 180 Technology®. With aggression on-tap, the Touring Edition provides the ultimate experience for drivers wanting the ability to unleash the fury of the 6.2L while providing drone-free in-cabin acoustics at cruising speeds. Responsive to throttle input, the 180 Technology®-equipped Touring Edition is capable of remaining tame until provoked by the driver. The Touring Edition Axleback comes complete with over-axle tubes, rear 180 Technology® resonators, quad 4.5” double-walled tips in chrome silver or diamond black, and all necessary hardware for installation. AWE AFM Valve Simulators (included) are required for vehicles equipped with AFM valves; i.e. Corvette Stingray / Z51 Auto / Z51 Manual (2014-2016) / Grand Sport Auto. All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1

Raw, rowdy, and lightweight. The AWE Track Edition Axle Back is the perfect dose of steel for drivers looking for the loudest of the lot. Retaining the 3” diameter T304L stainless steel construction, the Track Edition Axle Back mirrors all of the precision engineering and perfect fitment found in its Touring Edition counterpart, minus the 180 Technology®. Instead, the Track Edition features straight pipe sections to deliver the thunder. The C7 Track Edition Exhaust is not for the faint of heart, and for this reason, Track Edition Exhausts cannot be returned based on sound preference. Choose your weapon wisely. If you're running the Track Edition and want to tone it down, we made it easy to convert catbacks from a Track Edition to a Touring Edition with our Conversion Kits. Easy! AWE includes our AFM Valve Simulators (required for the Corvette Stingray / Z51 Auto / Z51 Manual (2014-2016) / Grand Sport Auto) in every kit. The AFM Valve Simulators provide a worry-free solution for removing AFM valves from the exhaust route without causing a check engine light. They flaunt CNC laser-cut T304 stainless steel construction, and are a direct bolt-on to factory AFM valve motors. Simply remove the AFM valve motors from the factory exhaust, bolt them onto the AWE AFM Valve Simulator, and secure them safely to the vehicle. Once installed, the AFM valve motors will retain their factory operation, and keep your car’s ECU happy. Vehicles without AFM valves do not need to use the AFM Valve Simulators. All tip options are 4.5” slash-cut, and include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1

In Axleback form, the AWE Touring Edition Exhaust retains the SS’ factory mid-section, coming in right at the rear axle. The Axleback AWE Touring Edition Exhaust maintains a 3” diameter, shaves weight from the rear, and features AWE’s drone-canceling solution, 180 Technology®. Tip Options: All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.This Part Fits: Year Make Model Submodel 2020-2024 Chevrolet Camaro LT1 2016-2024 Chevrolet Camaro SS

In Axleback form, the AWE Touring Edition Exhaust retains the SS’ factory mid-section, coming in right at the rear axle. The Axleback AWE Touring Edition Exhaust maintains a 3” diameter, shaves weight from the rear, and features AWE’s drone-canceling solution, 180 Technology®. Tip Options: All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.This Part Fits: Year Make Model Submodel 2020-2024 Chevrolet Camaro LT1 2016-2024 Chevrolet Camaro SS 2017-2024 Chevrolet Camaro ZL1