100% Synthetic High Performance Fuel Economy Lubricant, specially designed for BMW and MINI vehicles, fitted with Gasoline engines meeting Euro 4, 5 and 6 emission standards, requiring a "FE ? Fuel Economy" engine oil type and approved BMW Long-Life 01 FE.

TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for BMW & MINI vehicles requiring an approved BMW Long Life-01 FE lubricant. Suitable also for Gasoline and Diesel engines requiring a 5W-30 viscosity grade Fuel Economy lubricant type with ACEA A5 /B5 standards. Compatible with catalytic converters (CAT).; Before use always refer to the owner manual of the vehicle. ; PERFORMANCES: BMW Long Life-01 FE standard imposes very severe constraints on lubricant, particularly because of Valvetronic and after-treatment systems. This standard LL-01 FE covers most BMW Gasoline engines from 2001 until 2004, requiring a "Fuel Economy" lubricant. The standard BMW LL-01 FE also covers the previous BMW standards such as BMW LL-01 and LL-98; SPECIFIC LL-01 FE 5W-30 is particularly resistant at high temperatures and allows better control of oil consumption. Provides excellent oil flow, instant oil pressure and faster engine warm-up. This improved fuel economy and low emissions performance meet these OEMs requirements for CO2 emissions reductions.; RECOMMENDATIONS: refer to manufacturers? recommendations for drain intervals.;Technical BulletinMaterial Safety Data Sheet

Do not use pure product. Mix with soft water according to the required freezing protection: refer to chart To maintain anti-corrosion properties, do not dilute below 33%.Water for dilution: If possible, use soft water: Maximum hardness 35Degrees F and chlorides and sulfates maximum contain 50 ppm.Drain intervals: Refer to the manufacturers' recommendation. Attention, control or drain the coolant only when the engine is cold. This product should not be used to protect drinking water systems against freezing. Dangerous. Respect the use and handling recommendations.

100% Synthetic Fuel economy engine oil?specially designed for recent gasoline engines, turbocharged or naturally aspirated, direct or indirect injection, designed to use SAE 0W-16 oil with very low friction and very low HTHS (High Temperature High Shear) viscosity.

TYPE OF USE: Fuel Economy Gasoline engine lubricant, specially designed for recent gasoline engines, turbocharged or naturally aspirated, direct or indirect injection, designed to use oil with low friction and very low HTHS (High Temperature High Shear) viscosity (= 2.6 mPa.s). Suitable for modern gasoline engines requiring a viscosity grade 20 and fuel economy lubricant (API SN standard).; Approved GM-dexos1 GEN2 for all new GM gasoline engines requiring this approval: BUICK, CADILLAC, CHEVROLET, GM, GMC, OPEL and VAUXHALL.; Compatible with Catalytic converter.; This type of oil may be unsuitable for use in some engines, refer to the owner manual if in doubt. ;PERFORMANCES: API SN Plus standard provides higher performance and especially adds protection against LSPI for downsized direct injection turbocharged gasoline engines. Viscosity grade SAE 5W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster. Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and tune to your own use. MOTUL 8100 Eco-lite 5W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.Technical BulletinMaterial Safety Data Sheet

Drain interval: refer to manufacturers' recommendations and tune to your own use.MOTUL 8100 X-cess 5W-30 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.

Drain interval: refer to manufacturers' recommendations and tune to your own use.MOTUL 8100 X-cess 5W-30 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.

Drain interval: refer to manufacturers' recommendations and tune to your own use.MOTUL 8100 X-cess 5W-30 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.

Drain interval: refer to manufacturers' recommendations and tune to your own use.MOTUL 8100 X-cess 5W-30 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.

100% Synthetic and fuel economy Engine lubricant. This lubricant is specially designed for cars powered by Gasoline or diesel engines requiring ACEA C5 standard. It provides Fuel economy due to the oil composition lowering friction and therefore helping the engine run more free. The additive package used in this product protects also the after treatment system due to its reduced Phosphorus and Sulphur rate.

TYPE OF USE: Fuel Economy Gasoline engine lubricant, specially formulated for OEMs requiring engine oil with very low HTHS viscosity (High Temperature High Shear) = 2.6 mPa.s. and "Mid SAPS" with reduced content of Sulfated Ash (= 0.8%), Phosphorus (0.07% = x = 0.09%) and Sulfur (= 0.3%). Suitable for latest generation Gasoline and Diesel engines meeting very low emission standards, when a viscosity grade 20 and "Fuel Economy" is required. ; PERFORMANCES: The ACEA C5 standard requires significant oil film resistance and low emissions.; MB 229.71 standard is particularly demanding in terms of Fuel Economy performance. 8100 ECO-CLEAN 0W-20 provides significant fuel economy performance (up to 1% compared to a reference 5W-30 MB 229.51 oil).; MB-Approval 229.71 is a unique approval and as such is not backward compatible and does not cover any other MB standards.; FIAT 9.55535-DSX specification requires the lubricant to be both SAE 0W-20 and Mid-SAPS in order to perfectly lubricate some of the latest generation of Gasoline and Diesel engines from FIAT (Fiat, Alfa-Romeo, Lancia). ; RECOMMENDATIONS: Drain interval: according to manufacturers? recommendations and tune to your own use. Do not mix with lubricants not ACEA C5 compliant. Before use always refer to the owner manual of the vehicle.Material Safety Data SheetTechnical Bulletin

TYPE OF USE: High Performance Technosynthese lubricant specially designed for powerful and recent cars, powered by large displacement engines, turbo Diesel direct injection, or Gasoline engines with injection and catalytic converter. Suitable for all type of fuels: leaded or unleaded Gasoline, ethanol, LPG and Diesel. Compatible for catalytic converters. Before use always refer to the owner manual or handbook of the vehicle. ;PERFORMANCES: The MB 229.3 standard is more stringent than the 229.1 in terms of aging resistance (extended drain interval: on board computer) and Fuel Economy Performance: 1.2 percent Fuel Economy improvement compare to a 15W-40 oil reference. The MB 229.3 standard applies for most of MERCEDES Gasoline engines and the majority of MERCEDES Diesel engines without DPF (Diesel Particulate Filter). The ACEA B4 performance requires an outstanding detergent/dispersant capacity and a better viscosity increase resistance due to soot produced by direct injection Diesel engines (except VW unit injector engines that require MOTUL SPECIFIC 505 01 502 00 505 00 5W-40 or MOTUL 8100 X-CLEAN 5W-40). The API SN performance guarantees the highest level of performance for the lubricant in terms of engine cleanliness and wear protection. Before use, always refer to the owner manual or handbook of the vehicle. The viscosity grade SAE 10W-40 is fully suitable for recent Gasoline and Diesel engines. The synthetic base stock reinforced with Technosynthese provides very high lubricating power which reduces frictions decreases the volatility and ensures resistance to very high temperatures reached in modern engines. Anti-oxidation, Anti-wear, Anti-corrosion, Anti-foam properties. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and tune to your own use. Can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.Material Safety Data SheetTechnical Bulletin

TYPE OF USE: High Performance Technosynthese lubricant specially designed for powerful and recent cars, powered by large displacement engines, turbo Diesel direct injection, or Gasoline engines with injection and catalytic converter. Suitable for all type of fuels: leaded or unleaded Gasoline, ethanol, LPG and Diesel. Compatible for catalytic converters. Before use always refer to the owner manual or handbook of the vehicle. ;PERFORMANCES: The MB 229.3 standard is more stringent than the 229.1 in terms of aging resistance (extended drain interval: on board computer) and Fuel Economy Performance: 1.2 percent Fuel Economy improvement compare to a 15W-40 oil reference. The MB 229.3 standard applies for most of MERCEDES Gasoline engines and the majority of MERCEDES Diesel engines without DPF (Diesel Particulate Filter). The ACEA B4 performance requires an outstanding detergent/dispersant capacity and a better viscosity increase resistance due to soot produced by direct injection Diesel engines (except VW unit injector engines that require MOTUL SPECIFIC 505 01 502 00 505 00 5W-40 or MOTUL 8100 X-CLEAN 5W-40). The API SN performance guarantees the highest level of performance for the lubricant in terms of engine cleanliness and wear protection. Before use, always refer to the owner manual or handbook of the vehicle. The viscosity grade SAE 10W-40 is fully suitable for recent Gasoline and Diesel engines. The synthetic base stock reinforced with Technosynthese provides very high lubricating power which reduces frictions decreases the volatility and ensures resistance to very high temperatures reached in modern engines. Anti-oxidation, Anti-wear, Anti-corrosion, Anti-foam properties. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and tune to your own use. Can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.Material Safety Data SheetTechnical Bulletin

Low SAPS Lubricant for Heavy Duty diesel engines, specially designed for the last generation of trucks, buses, construction machinery, farm machinery, stationary engines, and boat engines running with low Sulfur fuel (= 50 ppm). Low emissions turbo diesel direct injection engines, Euro II, Euro III, Euro IV, Euro V or Euro VI emission regulation compliant, fitted with EGR System (Exhaust Gas Re-circulation) and/or SCR (Selected Catalyst Reduction) system and with or without DPF (diesel Particulate Filter), working in highly severe conditions of load and service, requiring an engine oil ACEA E9 "Low SAPS" with reduced content of Sulfated Ash (= 1.0%), Phosphorus (= 0.12 %) and Sulfur (= 0.4%).

Motul 60L OEM Synthetic Engine Oil TEKMA MEGA+ 15W40

Low SAPS Lubricant for Heavy Duty diesel engines, specially designed for the last generation of trucks, buses, construction machinery, farm machinery, stationary engines, and boat engines running with low Sulfur fuel (= 50 ppm). Low emissions turbo diesel direct injection engines, Euro II, Euro III, Euro IV, Euro V or Euro VI emission regulation compliant, fitted with EGR System (Exhaust Gas Re-circulation) and/or SCR (Selected Catalyst Reduction) system and with or without DPF (diesel Particulate Filter), working in highly severe conditions of load and service, requiring an engine oil ACEA E9 "Low SAPS" with reduced content of Sulfated Ash (= 1.0%), Phosphorus (= 0.12 %) and Sulfur (= 0.4%).

Motul 10W50 300V Factory Line Synthetic Racing Oil - 12X1L - Case of 12

TYPE OF USE: Fuel Economy Gasoline engine lubricant, specially designed for recent gasoline engines, turbocharged or naturally aspirated, direct or indirect injection, designed to use oil with low friction and very low HTHS (High Temperature High Shear) viscosity (= 2.6 mPa.s). Suitable for modern gasoline engines requiring a viscosity grade 20 and fuel economy lubricant (API SN standard).; Approved GM-dexos1 GEN2 for all new GM gasoline engines requiring this approval: BUICK, CADILLAC, CHEVROLET, GM, GMC, OPEL and VAUXHALL.; Compatible with Catalytic converter.; This type of oil may be unsuitable for use in some engines, refer to the owner manual if in doubt. ;PERFORMANCES: The API SN standard is fully backward compatible over API SM requirements and all former API standards. API SN lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature during the whole oil life span. Viscosity grade SAE 0W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster. Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and tune to your own use. MOTUL 8100 Eco-lite 0W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.Technical BulletinMaterial Safety Data Sheet

TYPE OF USE: Fuel Economy engine oil specially formulated for recent gasoline engines, turbocharged or naturally aspirated, indirect or direct injection, designed to use engine oil with low friction and low HTHS (High Temperature High Shear) viscosity (= 2.9 mPa.s). Suitable for modern gasoline engines requiring a viscosity grade 30 and fuel economy lubricant (API SN and/or ILSAC GF-5 standard). ; Approved GM-dexos1 GEN2 for all new GM gasoline engines requiring this approval: BUICK, CADILLAC, CHEVROLET, GM, and GMC.; Compatible with catalytic converters. This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt.; PERFORMANCES: The API SN standard is fully backward compatible over API SM standard and all former API standards. Based on the API SN specification, the ILSAC GF-5 standard is even more severe especially on the energy saving criteria. GM dexos1 standard combines very stringent requirements from international standards like API, ACEA and ILSAC, together with specific GM requirements to prove Fuel Economy benefits and engine durability. GM has developed its dexos1 standard in order for the oils to provide a high thermal stability and insure an outstanding resistance at high temperatures to avoid black sludge and viscosity increase that soot, coming from combustion residues, may create. Some other OEMs require for their most recent Gasoline engines an API SN and/or ILSAC GF-5 lubricant to guarantee the maximum performance and durability. Examples of MOTUL 8100 Eco-lite 5W-30 possible use for these OEMs: HONDA, SUBARU and TOYOTA gasoline engines. Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and tune to your own use. MOTUL 8100 Eco-lite 5W-30 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.Material Safety Data SheetTechnical Bulletin

TYPE OF USE: Fuel Economy engine oil specially formulated for recent gasoline engines, turbocharged or naturally aspirated, indirect or direct injection, designed to use engine oil with low friction and low HTHS (High Temperature High Shear) viscosity (= 2.9 mPa.s). Suitable for modern gasoline engines requiring a viscosity grade 30 and fuel economy lubricant (API SN and/or ILSAC GF-5 standard). ; Approved GM-dexos1 GEN2 for all new GM gasoline engines requiring this approval: BUICK, CADILLAC, CHEVROLET, GM, and GMC.; Compatible with catalytic converters. This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt.; PERFORMANCES: The API SN standard is fully backward compatible over API SM standard and all former API standards. Based on the API SN specification, the ILSAC GF-5 standard is even more severe especially on the energy saving criteria. GM dexos1 standard combines very stringent requirements from international standards like API, ACEA and ILSAC, together with specific GM requirements to prove Fuel Economy benefits and engine durability. GM has developed its dexos1 standard in order for the oils to provide a high thermal stability and insure an outstanding resistance at high temperatures to avoid black sludge and viscosity increase that soot, coming from combustion residues, may create. Some other OEMs require for their most recent Gasoline engines an API SN and/or ILSAC GF-5 lubricant to guarantee the maximum performance and durability. Examples of MOTUL 8100 Eco-lite 5W-30 possible use for these OEMs: HONDA, SUBARU and TOYOTA gasoline engines. Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and tune to your own use. MOTUL 8100 Eco-lite 5W-30 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.Material Safety Data SheetTechnical Bulletin

Motul SNOWPOWER SYNTH 2T 1L

Motul Twin Gear Oil 75w90 Synthetic - 1qt

TYPE OF USE: Advanced Technosynthese lubricant for High Performance and High Protection.; Recommended for BMW (OEM Approved) as well as MERCEDES, RENAULT and VAG (Volkswagen, Audi, Skoda et Seat).; Specifically designed for powerful and recent cars fitted with Gasoline and Diesel engines, naturally aspirated or turbocharged, indirect or direct injection.; Suitable for all type of fuels: leaded or unleaded Gasoline, Ethanol, LPG, Diesel and biofuels.; Compatible with catalytic converters (CAT).Technical BulletinMaterial Safety Data Sheet

TYPE OF USE: Advanced Technosynthese lubricant for High Performance and High Protection.; Recommended for BMW (OEM Approved) as well as MERCEDES, RENAULT and VAG (Volkswagen, Audi, Skoda et Seat).; Specifically designed for powerful and recent cars fitted with Gasoline and Diesel engines, naturally aspirated or turbocharged, indirect or direct injection.; Suitable for all type of fuels: leaded or unleaded Gasoline, Ethanol, LPG, Diesel and biofuels.; Compatible with catalytic converters (CAT).Technical BulletinMaterial Safety Data Sheet

Drain interval: refer to manufacturers' recommendations and tune to your own use.MOTUL 6100 SYN-nergy 5W-30 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual or handbook of the vehicle.Technical BulletinMaterial Safety Data Sheet

TYPE OF USE: Advanced Technosynthese lubricant for High Performance and High Protection.; Recommended for BMW (OEM Approved) as well as MERCEDES, RENAULT and VAG (Volkswagen, Audi, Skoda et Seat).; Specifically designed for powerful and recent cars fitted with Gasoline and Diesel engines, naturally aspirated or turbocharged, indirect or direct injection.; Suitable for all type of fuels: leaded or unleaded Gasoline, Ethanol, LPG, Diesel and biofuels.; Compatible with catalytic converters (CAT).Technical BulletinMaterial Safety Data Sheet

TYPE OF USE: Advanced Technosynthese lubricant for High Performance and High Protection.; Recommended for BMW, FORD, GM, MERCEDES, RENAULT and VAG (Volkswagen, Audi, Skoda and Seat).; Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, indirect or direct injection, EURO 4, EURO 5 or EURO 6 emission regulation compliant and requiring an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (= 0.8Fully), Phosphorus (0.07 = x = 0.09Fully) and Sulfur (= 0.3Fully).; Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF).; Always refer to the owner?s manual if in doubt.Technical BulletinMaterial Safety Data Sheet

Technosynthese lubricant providing high protection and high performance. Specially designed for the latest generation of cars powered by gasoline and diesel engine requiring ACEA C3 / API SN standards. This product has Technosynthese synthetic base stocks coupled with specific friction modifier molecules and formulation that generate outstanding oil film resistance, reduce friction in the engine and provide after treatment devices compatibility. It also has high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. It can achieve extended drain intervals as managed by the vehicle on-board computer.

Motul 4L 3000 4T Oil 10W40 - Case of 4

TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for VAG group latest generation engines requiring an approved VW 508 00 509 00 lubricant. Particularly dedicated to some high performance Gasoline and Diesel engines from VW and AUDI brands, fitted with catalytic converters (CAT) and Diesel Particulate Filter (DPF). Suitable also for engines requiring a 0W-20 viscosity grade Fuel Economy lubricant type with ACEA A1 / B1 standard. Suitable for all types of fuels: gasolines, Diesels and biofuels. Before use always refer to the owner manual of the vehicle. ;PERFORMANCES: Exclusively formulated to lubricate the latest generation of VAG group Gasoline and Diesel engines from VW and AUDI requiring VW 508 00 509 00 specification. The standard VW 508 00 509 00 is particularly demanding on the Fuel Economy performance and associated with the ACEA A1 / B1 standard for lubricants, MOTUL SPECIFIC 508 00 509 00 0W-20 provides significant energy saving performance (up to 1.5percent compare to a 5W-30 reference oil). This improved fuel economy implies lower levels of pollutants and fully satisfies commitments of manufacturers such as VW and AUDI for CO2 reduction. VW 508 00 509 00 specification is a unique specification and therefore is not backward compatible and do not cover over any other VW standards.; Viscosity grade SAE 0W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold.; Through its exceptional lubricating properties, MOTUL SPECIFIC 508 00 509 00 0W-20 provides high level of wear resistance, high temperature resistance and oxidation resistance. It reduces the formation of deposits, reduces wear and enables perfect control of oil consumption. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and to be adapted to your own use. MOTUL SPECIFIC 508 00 509 00 0W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.Technical BulletinMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2017 Audi A4 Premium 2017 Audi A4 Premium Plus 2017 Audi A4 Prestige 2016 Audi S5 Premium Plus 2016 Audi S5 Prestige

TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for VAG group latest generation engines requiring an approved VW 508 00 509 00 lubricant. Particularly dedicated to some high performance Gasoline and Diesel engines from VW and AUDI brands, fitted with catalytic converters (CAT) and Diesel Particulate Filter (DPF). Suitable also for engines requiring a 0W-20 viscosity grade Fuel Economy lubricant type with ACEA A1 / B1 standard. Suitable for all types of fuels: gasolines, Diesels and biofuels. Before use always refer to the owner manual of the vehicle. ;PERFORMANCES: Exclusively formulated to lubricate the latest generation of VAG group Gasoline and Diesel engines from VW and AUDI requiring VW 508 00 509 00 specification. The standard VW 508 00 509 00 is particularly demanding on the Fuel Economy performance and associated with the ACEA A1 / B1 standard for lubricants, MOTUL SPECIFIC 508 00 509 00 0W-20 provides significant energy saving performance (up to 1.5percent compare to a 5W-30 reference oil). This improved fuel economy implies lower levels of pollutants and fully satisfies commitments of manufacturers such as VW and AUDI for CO2 reduction. VW 508 00 509 00 specification is a unique specification and therefore is not backward compatible and do not cover over any other VW standards.; Viscosity grade SAE 0W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold.; Through its exceptional lubricating properties, MOTUL SPECIFIC 508 00 509 00 0W-20 provides high level of wear resistance, high temperature resistance and oxidation resistance. It reduces the formation of deposits, reduces wear and enables perfect control of oil consumption. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and to be adapted to your own use. MOTUL SPECIFIC 508 00 509 00 0W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.Material Safety Data SheetTechnical BulletinThis Part Fits: Year Make Model Submodel 2017 Audi A4 Premium 2017 Audi A4 Premium Plus 2017 Audi A4 Prestige 2016 Audi S5 Premium Plus 2016 Audi S5 Prestige

TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for JAGUAR LAND ROVER latest generation Gasoline engines requiring an approved STJLR.51.5122 lubricant. Suitable also for Gasoline engines requiring a 0W-20 viscosity grade Fuel Economy lubricant type with ACEA A1 / B1 standard. Compatible with catalytic converters. Suitable for all types of gasolines and biofuels. Before use always refer to the owner manual of the vehicle. ;PERFORMANCES: Formulated to perfectly lubricate the latest generation of JAGUAR LAND ROVER Gasoline engines 6-cylinders 3.0L and 8-cylinders 5.0L, naturally aspirated and supercharged, requiring an approved STJLR.51.5122 lubricant. The specification STJLR.51.5122 also covers many V6 and V8 Gasoline engines from JAGUAR LAND ROVER currently requiring FORD WSS M2C 925 A whenever product with this specification is not available. If in doubt, always check the vehicle owner' s manual.; Based on ACEA A5/B5 sequences engine tests requirements, MOTUL SPECIFIC 5122 0W-20 provides significant energy savings (>3.8percent) while exceeding robustness requirements of Ford 925 A. This improved fuel economy and low emissions performance meet these OEMs requirements for CO2 emissions reductions.; MOTUL SPECIFIC 5122 0W-20 delivers outstanding oil film resistance, while facilitating cold start, reducing friction in the engine, maintaining the oil pressure and lowering engine operating temperatures. Viscosity grade SAE 0W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold.; Through its exceptional lubricating properties, MOTUL SPECIFIC 5122 0W-20 provides high level of wear resistance, high temperature resistance and oxidation resistance. It reduces the formation of deposits, reduces wear and enables perfect control of oil consumption. ;RECOMMENDATIONS: MOTUL SPECIFIC 5122 0W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.Material Safety Data SheetTechnical BulletinThis Part Fits: Year Make Model Submodel 2017 Jaguar F-Pace Base 2017 Jaguar F-Pace First Edition 2017 Jaguar F-Pace Premium 2017 Jaguar F-Pace Prestige 2017 Jaguar F-Pace R-Sport 2017 Jaguar F-Pace S 2014-2017 Jaguar F-Type Base 2017 Jaguar F-Type British Design Edition 2017 Jaguar F-Type Premium 2016 Jaguar F-Type Project 7 2015-2017 Jaguar F-Type R 2014-2017 Jaguar F-Type S 2017 Jaguar F-Type SVR 2014-2015 Jaguar F-Type V8 S 2017 Jaguar XE Base 2017 Jaguar XE Premium 2017 Jaguar XE Prestige 2017 Jaguar XE R-Sport 2013-2014 Jaguar XF 3.0L 2013-2014 Jaguar XF 3.0L AWD 2010-2014,2017 Jaguar XF Base 2012,2015 Jaguar XF Portfolio 2010-2011,2015-2017 Jaguar XF Premium 2016-2017 Jaguar XF Prestige 2016-2017 Jaguar XF R-Sport 2016-2017 Jaguar XF S 2015 Jaguar XF Sport 2010-2015 Jaguar XF Supercharged 2012 Jaguar XFR Base 2013-2015 Jaguar XFR-S Base 2011-2015 Jaguar XJ Base 2011 Jaguar XJ L 2012-2017 Jaguar XJ L Portfolio 2011-2017 Jaguar XJ L Supercharged 2011-2013 Jaguar XJ L Supersport 2013 Jaguar XJ L Ultimate 2016-2017 Jaguar XJ R-Sport 2011-2017 Jaguar XJ Supercharged 2011-2013 Jaguar XJ Supersport 2009 Jaguar XJ8 Base 2009 Jaguar XJ8 L 2014-2017 Jaguar XJR Base 2014-2017 Jaguar XJR L 2014-2016 Land Rover LR4 Base 2014-2016 Land Rover LR4 HSE 2014-2016 Land Rover LR4 HSE Lux 2014-2017 Land Rover Range Rover Autobiography 2014 Land Rover Range Rover Autobiography Black 2014-2017 Land Rover Range Rover Base 2014-2017 Land Rover Range Rover HSE 2014-2017 Land Rover Range Rover Supercharged 2016-2017 Land Rover Range Rover SV Autobiography 2013-2017 Land Rover Range Rover Sport Autobiography 2013 Land Rover Range Rover Sport GT Limited Edition 2013-2017 Land Rover Range Rover Sport HSE 2017 Land Rover Range Rover Sport HSE Dynamic 2013 Land Rover Range Rover Sport HSE Lux 2016 Land Rover Range Rover Sport HST 2014-2017 Land Rover Range Rover Sport SE 2013-2017 Land Rover Range Rover Sport Supercharged 2016 Land Rover Range Rover Sport Supercharged Dynamic 2015-2017 Land Rover Range Rover Sport SVR

TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for JAGUAR LAND ROVER latest generation Gasoline engines requiring an approved STJLR.51.5122 lubricant. Suitable also for Gasoline engines requiring a 0W-20 viscosity grade Fuel Economy lubricant type with ACEA A1 / B1 standard. Compatible with catalytic converters. Suitable for all types of gasolines and biofuels. Before use always refer to the owner manual of the vehicle. ;PERFORMANCES: Formulated to perfectly lubricate the latest generation of JAGUAR LAND ROVER Gasoline engines 6-cylinders 3.0L and 8-cylinders 5.0L, naturally aspirated and supercharged, requiring an approved STJLR.51.5122 lubricant. The specification STJLR.51.5122 also covers many V6 and V8 Gasoline engines from JAGUAR LAND ROVER currently requiring FORD WSS M2C 925 A whenever product with this specification is not available. If in doubt, always check the vehicle owner' s manual.; Based on ACEA A5/B5 sequences engine tests requirements, MOTUL SPECIFIC 5122 0W-20 provides significant energy savings (>3.8percent) while exceeding robustness requirements of Ford 925 A. This improved fuel economy and low emissions performance meet these OEMs requirements for CO2 emissions reductions.; MOTUL SPECIFIC 5122 0W-20 delivers outstanding oil film resistance, while facilitating cold start, reducing friction in the engine, maintaining the oil pressure and lowering engine operating temperatures. Viscosity grade SAE 0W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold.; Through its exceptional lubricating properties, MOTUL SPECIFIC 5122 0W-20 provides high level of wear resistance, high temperature resistance and oxidation resistance. It reduces the formation of deposits, reduces wear and enables perfect control of oil consumption. ;RECOMMENDATIONS: MOTUL SPECIFIC 5122 0W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.Material Safety Data SheetTechnical BulletinThis Part Fits: Year Make Model Submodel 2017 Jaguar F-Pace Base 2017 Jaguar F-Pace First Edition 2017 Jaguar F-Pace Premium 2017 Jaguar F-Pace Prestige 2017 Jaguar F-Pace R-Sport 2017 Jaguar F-Pace S 2014-2017 Jaguar F-Type Base 2017 Jaguar F-Type British Design Edition 2017 Jaguar F-Type Premium 2016 Jaguar F-Type Project 7 2015-2017 Jaguar F-Type R 2014-2017 Jaguar F-Type S 2017 Jaguar F-Type SVR 2014-2015 Jaguar F-Type V8 S 2017 Jaguar XE Base 2017 Jaguar XE Premium 2017 Jaguar XE Prestige 2017 Jaguar XE R-Sport 2013-2014 Jaguar XF 3.0L 2013-2014 Jaguar XF 3.0L AWD 2010-2014,2017 Jaguar XF Base 2012,2015 Jaguar XF Portfolio 2010-2011,2015-2017 Jaguar XF Premium 2016-2017 Jaguar XF Prestige 2016-2017 Jaguar XF R-Sport 2016-2017 Jaguar XF S 2015 Jaguar XF Sport 2010-2015 Jaguar XF Supercharged 2012 Jaguar XFR Base 2013-2015 Jaguar XFR-S Base 2011-2015 Jaguar XJ Base 2011 Jaguar XJ L 2012-2017 Jaguar XJ L Portfolio 2011-2017 Jaguar XJ L Supercharged 2011-2013 Jaguar XJ L Supersport 2013 Jaguar XJ L Ultimate 2016-2017 Jaguar XJ R-Sport 2011-2017 Jaguar XJ Supercharged 2011-2013 Jaguar XJ Supersport 2009 Jaguar XJ8 Base 2009 Jaguar XJ8 L 2014-2017 Jaguar XJR Base 2014-2017 Jaguar XJR L 2014-2016 Land Rover LR4 Base 2014-2016 Land Rover LR4 HSE 2014-2016 Land Rover LR4 HSE Lux 2014-2017 Land Rover Range Rover Autobiography 2014 Land Rover Range Rover Autobiography Black 2014-2017 Land Rover Range Rover Base 2014-2017 Land Rover Range Rover HSE 2014-2017 Land Rover Range Rover Supercharged 2016-2017 Land Rover Range Rover SV Autobiography 2013-2017 Land Rover Range Rover Sport Autobiography 2013 Land Rover Range Rover Sport GT Limited Edition 2013-2017 Land Rover Range Rover Sport HSE 2017 Land Rover Range Rover Sport HSE Dynamic 2013 Land Rover Range Rover Sport HSE Lux 2016 Land Rover Range Rover Sport HST 2014-2017 Land Rover Range Rover Sport SE 2013-2017 Land Rover Range Rover Sport Supercharged 2016 Land Rover Range Rover Sport Supercharged Dynamic 2015-2017 Land Rover Range Rover Sport SVR

TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for BMW & MINI recent vehicles fitted with Gasoline and Diesel requiring an approved BMW Long Life -12 FE lubricant. Suitable also for Gasoline and Diesel engines requiring a 0W-30 viscosity grade Fuel Economy lubricant type with ACEA C2 standards. Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF). Suitable for all types of fuels: gasolines, diesels and biofuels. Before use always refer to the owner manual of the vehicle. ;PERFORMANCES: Formulated to lubricate perfectly the latest generation of BMW and MINI Gasoline and Diesel engines requiring the specification BMW LL-12 FE. The BMW Longlife-12 FE norm is required for the Gasoline and Diesel engines from MY2012/2013, but especially for the Nx7K1, Nx7U1 and Nx701 engines European Union countries, Norway, Switzerland and Lichtenstein. The BMW Longlife-12 FE standard is only suitable for BMW Diesel engines certified for this purpose and produced from model year 2014 (all 3-cylinder B37 engines, 4-cylinder engines from model year 2014 and 6-cylinder engines from model year 2013) fitted with one turbocharger maximum, and for all BMW Gasoline engines from model year 2002, and is restricted only to the European Union countries, Norway, Switzerland and Liechtenstein. BMW LL-12 FE specification is not valid for engines fitted with 2 or 3 turbochargers. If in doubt, always refer to the owner manual of the vehicle.; Associated with ACEA C2 standard for lubricants, MOTUL SPECIFIC LL-12 FE 0W-30 provides significant energy savings (up to 1.5percent compare to the BMW LL-01 reference lubricant) while exceeding robustness requirements of BMW LL-04 specification. This improved fuel economy and low emissions performance meet these OEMs requirements for CO2 emissions reductions.; ;RECOMMENDATIONS: MOTUL SPECIFIC LL-12 FE 0W-30 can be mixed with synthetic or mineral oils.Material Safety Data SheetTechnical BulletinThis Part Fits: Year Make Model Submodel 2014-2017 Mini Cooper Base 2014 Mini Cooper Clubman 2014-2015 Mini Cooper Coupe 2014-2015 Mini Cooper Coupe John Cooper Works 2014-2015 Mini Cooper Coupe S 2014-2017 Mini Cooper John Cooper Works 2014 Mini Cooper John Cooper Works Clubman 2014-2015 Mini Cooper Roadster 2014-2015 Mini Cooper Roadster John Cooper Works 2014-2015 Mini Cooper Roadster S 2014-2017 Mini Cooper S 2014 Mini Cooper S Clubman

TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for BMW & MINI recent vehicles fitted with Gasoline and Diesel requiring an approved BMW Long Life -12 FE lubricant. Suitable also for Gasoline and Diesel engines requiring a 0W-30 viscosity grade Fuel Economy lubricant type with ACEA C2 standards. Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF). Suitable for all types of fuels: gasolines, diesels and biofuels. Before use always refer to the owner manual of the vehicle. ;PERFORMANCES: Formulated to lubricate perfectly the latest generation of BMW and MINI Gasoline and Diesel engines requiring the specification BMW LL-12 FE. The BMW Longlife-12 FE norm is required for the Gasoline and Diesel engines from MY2012/2013, but especially for the Nx7K1, Nx7U1 and Nx701 engines European Union countries, Norway, Switzerland and Lichtenstein. The BMW Longlife-12 FE standard is only suitable for BMW Diesel engines certified for this purpose and produced from model year 2014 (all 3-cylinder B37 engines, 4-cylinder engines from model year 2014 and 6-cylinder engines from model year 2013) fitted with one turbocharger maximum, and for all BMW Gasoline engines from model year 2002, and is restricted only to the European Union countries, Norway, Switzerland and Liechtenstein. BMW LL-12 FE specification is not valid for engines fitted with 2 or 3 turbochargers. If in doubt, always refer to the owner manual of the vehicle.; Associated with ACEA C2 standard for lubricants, MOTUL SPECIFIC LL-12 FE 0W-30 provides significant energy savings (up to 1.5percent compare to the BMW LL-01 reference lubricant) while exceeding robustness requirements of BMW LL-04 specification. This improved fuel economy and low emissions performance meet these OEMs requirements for CO2 emissions reductions.; ;RECOMMENDATIONS: MOTUL SPECIFIC LL-12 FE 0W-30 can be mixed with synthetic or mineral oils.Technical BulletinMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2014-2017 Mini Cooper Base 2014 Mini Cooper Clubman 2014-2015 Mini Cooper Coupe 2014-2015 Mini Cooper Coupe John Cooper Works 2014-2015 Mini Cooper Coupe S 2014-2017 Mini Cooper John Cooper Works 2014 Mini Cooper John Cooper Works Clubman 2014-2015 Mini Cooper Roadster 2014-2015 Mini Cooper Roadster John Cooper Works 2014-2015 Mini Cooper Roadster S 2014-2017 Mini Cooper S 2014 Mini Cooper S Clubman

TYPE OF USE: Fully Synthetic "Fuel economy" engine oil specially designed for Hybrid Electric Vehicles (H.E.V) and Plug-in Hybrid Electric Vehicles (P.H.E.V) fitted with recent gasoline engines, turbocharged or naturally aspirated, direct or indirect injection, designed to use SAE 0W-16 oil with low friction and very low HTHS (High Temperature High Shear) viscosity (= 2.6 mPa.s); Suitable also for battery electric vehicles (B.E.V) fitted with thermal gasoline engine used as Range Extender; Suitable for modern gasoline engines requiring a viscosity grade SAE 0W-16 lubricant or a ?Fuel Economy? lubricant in viscosity grade 16: Standards API SN, API SN-RC and/or ILSAC GF-5.; Compatible with catalytic converters.; This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt; MOTUL HYBRID 0W-16 is specially formulated to meet the specific needs of hybrid electric vehicles, where multiples unexpected stops and starts of the Gasoline engine are involved during the different operating phases of the hybrid vehicle. This particular mode of operation of the internal combustion engine on a hybrid vehicle generates very specific constraints for the lubricant, and in this, MOTUL HYBRID 0W-16 fully meets all these requirements.Material Safety Data SheetTechnical Bulletin