The 2019+ Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet. With its direct-injected and turbocharged engine producing 310 lb-ft of torque, the 2019+ Ranger combines efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces plenty of power to let you roam free, but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger, but the stock intercooler pipes can only handle so much boost. That’s why Mishimoto has developed this aluminum intercooler pipe and boot kit for the 2019+ Ford Ranger 2.3L EcoBoost.Our all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and dyno-proven max gains of 9.7 wheel horsepower and 9 lb-ft of torque when combined with Mishimoto intercooler pipes. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy.This kit includes Mishimoto Silicone Boots with DuraCore™ technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto high-torque worm gear clamps for consistent holding power.Like all our Ranger products, this 2019+ Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2019-2022 Ford Ranger Lariat 2019-2022 Ford Ranger XL 2019-2022 Ford Ranger XLT

The 2019+ Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet. With its direct-injected and turbocharged engine producing 310 lb-ft of torque, the 2019+ Ranger combines efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces plenty of power to let you roam free, but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger, but the stock intercooler pipes can only handle so much boost. That’s why Mishimoto has developed this aluminum intercooler pipe and boot kit for the 2019+ Ford Ranger 2.3L EcoBoost.Our all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and dyno-proven max gains of 9.7 wheel horsepower and 9 lb-ft of torque when combined with Mishimoto intercooler pipes. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy.This kit includes Mishimoto Silicone Boots with DuraCore™ technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto high-torque worm gear clamps for consistent holding power.Like all our Ranger products, this 2019+ Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2019-2022 Ford Ranger Lariat 2019-2022 Ford Ranger XL 2019-2022 Ford Ranger XLT

Mishimoto has developed an intercooler pipe and boot kIt'specifically engineered for use on the 1994-2002 Dodge 5.9L Cummins. The Mishimoto intercooler pipes are constructed of 3inin mandrel-bent aluminum and provide substantial improvements in power, airflow, and EGTs. Mishimoto DuraCore boots and constant-tension T-bolt clamps are also included in this kit. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The Mishimoto Dodge 5.9L Cummins intercooler piping and boot kit is designed to work with our Dodge 5.9L Cummins Performance Intercooler. Like all of our Cummins performance parts, this kit includes the Mishimoto Lifetime Warranty.inThis Part Fits: Year Make Model Submodel 1994-2002 Dodge Ram 2500 Base 1994-2002 Dodge Ram 3500 Base 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT

Mishimoto has developed an intercooler pipe and boot kit specifically engineered for use on the 2013+ Dodge 6.7L Cummins. After investigating the pipe routing and size, our engineers identified numerous areas where improvement was necessary. The Mishimoto Cummins performance intercooler pipes are constructed of mandrel-bent aluminum routed in a way that eliminates restrictive bends present in the factory pipes. Mishimoto engineers also increased the pipe diameter to provide substantial improvements in airflow. Mishimoto DuraCore? boots and Constant-Tension T-bolt clamps are also included in this Cummins performance kit. Mishimoto DuraCore? technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The Mishimoto Dodge 6.7L Cummins Intercooler Pipe and Boot Kit is designed to work with the Mishimoto Dodge 6.7L Cummins Performance Intercooler and like all of our Cummins performance parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

Mishimoto has developed an intercooler pipe and boot kIt'specifically engineered for use on the 2010-2012 Dodge 6.7L Cummins. After investigating the pipe routing and size, our engineers identified numerous areas where improvement was necessary. The Mishimoto intercooler pipes are constructed of mandrel bent aluminum routed in a way that eliminates restrictive bends present in the factory pipes. Along with this we increased the pipe diameter from 3in to 3.5in to provide substantial improvements in power, airflow, and EGTs. Mishimoto DuraCore boots and constant-tension T-bolt clamps are also included in this kit. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The Mishimoto Dodge 6.7L Cummins intercooler piping and boot kit is designed to work with our performance intercooler. The kit is made in the USA and includes the Mishimoto lifetime warranty.This Part Fits: Year Make Model Submodel 2010 Dodge Ram 2500 Laramie 2010 Dodge Ram 2500 SLT 2010 Dodge Ram 2500 ST 2010 Dodge Ram 2500 SXT 2010 Dodge Ram 2500 TRX 2009-2010 Dodge Ram 3500 Laramie 2009-2010 Dodge Ram 3500 SLT 2009-2010 Dodge Ram 3500 ST 2009 Dodge Ram 3500 SXT 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2011-2012 Ram 2500 Laramie 2011-2012 Ram 2500 Laramie Longhorn 2012 Ram 2500 Outdoorsman 2011-2012 Ram 2500 SLT 2011-2012 Ram 2500 ST 2011-2012 Ram 3500 Laramie 2011-2012 Ram 3500 Laramie Longhorn 2011-2012 Ram 3500 SLT 2011-2012 Ram 3500 ST

Mishimoto has developed an intercooler pipe and boot kIt'specifically engineered for use on the 2007.5-2009 Dodge 6.7L Cummins.After investigating the pipe routing and size, our engineers identified numerous areas where improvement was necessary.The Mishimoto intercooler pipes are made in the USA and constructed of mandrel bent aluminum, routed in a way that eliminates restrictive bends present in the factory pipes.Along with this we increased the pipe diameter from 3 to 3.5 to provide substantial improvements in power, airflow, and EGTs.Mishimoto DuraCore boots and constant-tension T-bolt clamps are also included in this kit.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.The Mishimoto Dodge 6.7L Cummins intercooler piping and boot kit is designed to work in conjunction with our performance intercooler and includes the Mishimoto lifetime warranty.This Part Fits: Year Make Model Submodel 2007-2009 Dodge Ram 2500 Laramie 2007-2009 Dodge Ram 2500 Power Wagon 2007-2009 Dodge Ram 2500 SLT 2007 Dodge Ram 2500 Sport 2007-2009 Dodge Ram 2500 ST 2008-2009 Dodge Ram 2500 SXT 2007 Dodge Ram 2500 TRX4 2007-2009 Dodge Ram 3500 Laramie 2007-2009 Dodge Ram 3500 SLT 2007 Dodge Ram 3500 Sport 2007-2009 Dodge Ram 3500 ST 2008-2009 Dodge Ram 3500 SXT 2007 Dodge Ram 3500 TRX4 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT

Mishimoto has developed an intercooler pipe and boot kIt'specifically engineered for use on the 2003-2007 Dodge 5.9L Cummins.After investigating the pipe routing and size, our engineers identified numerous areas where improvement was necessary.The Mishimoto intercooler pipes are made in the USA and are constructed of mandrel bent aluminum routed in a way that eliminates restrictive bends present in the factory pipes.Along with this we increased the pipe diameter from 3 to 3.5 to provide substantial improvements in power, airflow, and EGTs.Mishimoto DuraCore boots and constant-tension T-bolt clamps are also included in this kit.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.The Mishimoto Dodge 5.9L Cummins intercooler piping and boot kit is designed to work with our performance intercooler and includes the Mishimoto lifetime warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003,2005-2007 Dodge Ram 2500 Laramie 2006-2007 Dodge Ram 2500 Power Wagon 2003-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2003-2007 Dodge Ram 2500 ST 2006-2007 Dodge Ram 2500 TRX4 2003-2007 Dodge Ram 3500 Laramie 2003-2007 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2003-2007 Dodge Ram 3500 ST 2007 Dodge Ram 3500 TRX4 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT

Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new intercooler pipe kit designed specifically for the 2015-2023 Ford Mustang EcoBoost. This EcoBoost Mustang kit features 2.5 hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This 2015-2023 Mustang kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under one hour. The precision CNC-machined BPV flange allows you to retain the stock EcoBoost Mustang BPV. The Mishimoto Mustang EcoBoost Intercooler Pipe Kit is available in either polished or wrinkle black finish and lilke our entire line of Mustang parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2019-2020 Ford Mustang Bullitt 2015-2021 Ford Mustang EcoBoost 2015-2021 Ford Mustang EcoBoost Premium 2015-2021 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new intercooler pipe kit designed specifically for the 2015-2023 Ford Mustang EcoBoost. This EcoBoost Mustang kit features 2.5 hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This 2015-2023 Mustang kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under one hour. The precision CNC-machined BPV flange allows you to retain the stock EcoBoost Mustang BPV. The Mishimoto Mustang EcoBoost Intercooler Pipe Kit is available in either polished or wrinkle black finish and lilke our entire line of Mustang parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2019-2020 Ford Mustang Bullitt 2015-2021 Ford Mustang EcoBoost 2015-2021 Ford Mustang EcoBoost Premium 2015-2021 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2020-2021 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Improve the flow of the charged air through your MK7 with the Mishimoto Intercooler Pipe Kit! The GTI has a long pedigreed history in the realm of hot-hatchbacks, especially when it comes to models powered with 4-cylinder turbo engines. The stock piping in Volkswagen?s star player, however, doesn?t quite live up to the hype. Full of bends, restrictive diameters, and constructed from degradation-prone materials, the stock charge pipes can be a hold-up for your MK7, especially when cranking up the boost. Here at Mishimoto, we improved on the intercooler piping system so that you can make your hot-hatch even hotter. We started with replacing all of the plastic and rubber with a more robust construction of mandrel-bent aluminum, and 5-layer, heat resistant silicone couplers to ensure a sturdy and long-lasting connection to and from the intercooler. We also reduced the amount of bends on top of increasing the piping diameter to 2.75 inches, together equating to a 30-percent increase in air flow, making these the perfect combination with an aftermarket tune.The Mishimoto MK7 Intercooler Pipe Kit is available in a polished or wrinkle black finish to suit the style of your MK7. We also stand behind the craftsmanship of our products which is why this piping kit also includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2020 Audi A3 Premium 2015-2020 Audi A3 Premium Plus 2015-2019 Audi A3 Prestige 2015-2016 Audi A3 TDI Premium 2015-2016 Audi A3 TDI Premium Plus 2015-2016 Audi A3 TDI Prestige 2019 Audi A3 Titanium 2020 Audi S3 Premium 2015-2020 Audi S3 Premium Plus 2015-2019 Audi S3 Prestige 2015-2021 Audi TT Quattro Base 2018-2021 Audi TT RS Quattro Base 2016-2021 Audi TTS Quattro Base 2017-2019 Volkswagen Golf S 2018-2019 Volkswagen Golf SE 2020-2021 Volkswagen Golf TSi 2017 Volkswagen Golf Wolfsburg Edition 2015-2019 Volkswagen Golf R Base 2019 Volkswagen Golf SportWagen S 2019 Volkswagen Golf SportWagen SE 2015-2020 Volkswagen GTI Autobahn 2019 Volkswagen GTI Rabbit Edition 2015-2021 Volkswagen GTI S 2015-2020 Volkswagen GTI SE 2017 Volkswagen GTI Sport

Improve the flow of the charged air through your MK7 with the Mishimoto Intercooler Pipe Kit! The GTI has a long pedigreed history in the realm of hot-hatchbacks, especially when it comes to models powered with 4-cylinder turbo engines. The stock piping in Volkswagen?s star player, however, doesn?t quite live up to the hype. Full of bends, restrictive diameters, and constructed from degradation-prone materials, the stock charge pipes can be a hold-up for your MK7, especially when cranking up the boost. Here at Mishimoto, we improved on the intercooler piping system so that you can make your hot-hatch even hotter. We started with replacing all of the plastic and rubber with a more robust construction of mandrel-bent aluminum, and 5-layer, heat resistant silicone couplers to ensure a sturdy and long-lasting connection to and from the intercooler. We also reduced the amount of bends on top of increasing the piping diameter to 2.75 inches, together equating to a 30-percent increase in air flow, making these the perfect combination with an aftermarket tune.The Mishimoto MK7 Intercooler Pipe Kit is available in a polished or wrinkle black finish to suit the style of your MK7. We also stand behind the craftsmanship of our products which is why this piping kit also includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2020 Audi A3 Premium 2015-2020 Audi A3 Premium Plus 2015-2019 Audi A3 Prestige 2015-2016 Audi A3 TDI Premium 2015-2016 Audi A3 TDI Premium Plus 2015-2016 Audi A3 TDI Prestige 2019 Audi A3 Titanium 2020 Audi S3 Premium 2015-2020 Audi S3 Premium Plus 2015-2019 Audi S3 Prestige 2015-2021 Audi TT Quattro Base 2018-2021 Audi TT RS Quattro Base 2016-2021 Audi TTS Quattro Base 2017-2019 Volkswagen Golf S 2018-2019 Volkswagen Golf SE 2020-2021 Volkswagen Golf TSi 2017 Volkswagen Golf Wolfsburg Edition 2015-2019 Volkswagen Golf R Base 2019 Volkswagen Golf SportWagen S 2019 Volkswagen Golf SportWagen SE 2015-2020 Volkswagen GTI Autobahn 2019 Volkswagen GTI Rabbit Edition 2015-2021 Volkswagen GTI S 2015-2020 Volkswagen GTI SE 2017 Volkswagen GTI Sport

Mishimoto has developed a direct-fit intercooler pipe for the 2018-2023 Jeep Wrangler JL 2.0L that lets you maximize the performance of your turbocharged Hurricane engine.Our kit replaces the weak, unattractive, and restrictive stock intercooler pipe with a free-flowing and durable cast-aluminum pipe. By smoothing out the bumps, dips, and curves of the stock pipe, we were able to improve flow by 36-percent for dyno-proven gains of up to 12 lb-ft of torque and 7 horsepower.But power isn’t the only improvement we’ve made. This pipe is constructed from 100-percent cast aluminum for greater strength against heat and high boost pressure. The included silicone couplers with DuraCore™ technology are constructed from five layers of silicone and heat-resistant fibers for greater durability and strength. The DuraCore™ inner lining is also more resistant to fuel and oil for greater longevity. To add another layer of durability, this intercooler pipe has a wrinkle black powder coating for maximum resistance to corrosion and the elements.This cast aluminum intercooler pipe also allows for even more customizability and future upgrades. An area of thicker casting at the end of the pipe allows you to drill and tap for anything from boost sensors to nitrous or methanol injection. We’ve also included a removable bypass valve adapter that allows you to use the stock bypass valve or aftermarket blow-off valves.Like all Mishimoto Jeep Wrangler parts, this 2018-2023 Jeep Wrangler JL 2.0L intercooler pipe is backed by our Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2021 Jeep Wrangler 80th Anniversary 2021 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2021 Jeep Wrangler Rubicon 2018-2021 Jeep Wrangler Sport 2018-2021 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021 Jeep Wrangler Unlimited Freedom 2021 Jeep Wrangler Unlimited High Altitude 2021 Jeep Wrangler Unlimited High Altitude 4xe 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2021 Jeep Wrangler Unlimited Rubicon 2021 Jeep Wrangler Unlimited Rubicon 392 2021 Jeep Wrangler Unlimited Rubicon 4xe 2018-2021 Jeep Wrangler Unlimited Sahara 2021 Jeep Wrangler Unlimited Sahara 4xe 2021 Jeep Wrangler Unlimited Sahara Altitude 2018-2021 Jeep Wrangler Unlimited Sport 2021 Jeep Wrangler Unlimited Sport Altitude 2018-2021 Jeep Wrangler Unlimited Sport S 2021 Jeep Wrangler Unlimited Willys 2021 Jeep Wrangler Unlimited Willys Sport 2021 Jeep Wrangler Willys 2021 Jeep Wrangler Willys Sport

The venerable S58 found in the G8X M2, M3, and M4 follows BMW's tried and true formula of six cylinders in a row sending power to the back wheels for maximum tire-torturing fun. From the factory, the S58 cranks out up to 503 horsepower and 479 lb.-ft. of torque, but the two turbos tucked next to the engine whisper a tale of limitless possibilities with every shove of the throttle. If you can't hear them, it might be time to let them whisper a little louder with this performance charge pipe from Mishimoto.----The stock M2/M3/M4 charge pipe has the crucial job of transporting boost from both turbos to the intake manifold and intercooler so it can be turned into power by the engine. Looking at the stock charge pipe, however, you might not think BMW thought this was particularly important. Two rubber hoses carry that precious boost out of the turbos and into an (ugly) plastic merge before it enters the intercooler. Some owners are already seeing cracks and failures of this plastic merge on M2s, M3s, and M4s pushing more boost. Luckily, Mishimoto has a solution.----The Mishimoto G8X M2/M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that's stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades.----This performance charge pipe is a direct fit for your 2021+ BMW G8X M2/M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you're ready to unleash the limitless potential of your M2, M3, or M4, this Mishimoto performance charge pipe is for you.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023-2024 BMW M2 Base 2021-2024 BMW M3 Base 2021-2024 BMW M3 Competition 2022-2024 BMW M3 Competition xDrive 2024 BMW M3 CS 2021-2024 BMW M4 Base 2021-2024 BMW M4 Competition 2021-2024 BMW M4 Competition xDrive 2023-2024 BMW M4 CSL 2021-2024 BMW X3 M 2021-2022 BMW X3 M Competition

Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends, restrictive piping diameters, and degradation-prone materials, all of which slow the air to and from your intercooler putting a strain on the FOST?s performance. We here at Mishimoto'strive to free the flow of the charged air in your sporty Focus. To start we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct flow from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches of high-grade aluminum, allowing for a 14-percent increase in volume and 26-percent greater flow over the stock equipment. The stock rubber connections have also been replaced with sturdy silicone couplers to ensure solid connection between piping and intercooler. The improvements don?t stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire ensuring that it keeps its shape under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator.The result of adding the Mishimoto full Performance Intercooler and Piping kit to your 2013-2018 Focus ST in conjunction with the Mishimoto Performance intake is a 21-percent increase in flow of the charged air through the system, and an additional 8hp and 10ft/lb of torque boost on top of intake and intercooler gains on the stock tune.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends, restrictive piping diameters, and degradation-prone materials, all of which slow the air to and from your intercooler putting a strain on the FOST?s performance. We here at Mishimoto strive to free the flow of the charged air in your sporty Focus. To start we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct flow from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches of high-grade aluminum, allowing for a 14-percent increase in volume and 26-percent greater flow over the stock equipment. The stock rubber connections have also been replaced with sturdy silicone couplers to ensure solid connection between piping and intercooler. The improvements don't stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire ensuring that it keeps its shape under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator. The result of adding the Mishimoto full Performance Intercooler and Piping kit to your 2013-2018 Focus ST in conjunction with the Mishimoto Performance intake is a 21-percent increase in flow of the charged air through the system, and an additional 8hp and 10ft/lb of torque boost on top of intake and intercooler gains on the stock tune.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends, a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto's hot-side intercooler kit not only reduces the amount of bends, but also increased the diameter to 2.5? giving it a 14-percent increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already, the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat, and is covered under Mishimoto's Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends, a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto's hot-side intercooler kit not only reduces the amount of bends, but also increased the diameter to 2.5? giving it a 14-percent increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already, the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat, and is covered under Mishimoto's Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

Increase the flow of charged air from the intercooler in your 2013-2018 Ford Focus ST with the Mishimoto performance cold-side intercooler pipe. The piping included from the factory is constructed from rubber, which not only degrades over time, but also tends to move around in the engine bay as you put your Focus ST through the paces.We here at Mishimoto ditched the degradation-prone rubber for 5 layers of durable silicone reinforced with steel wire to make sure it stays put in the engine bay and holds its shape against the serious boost pressures running through it. Speaking of shape, the Mishimoto performance intercooler pipe is designed with a unique elliptical shape to accommodate for an upgrade to the Mishimoto performance radiator.Our silicone piping also features a 2.5-inch inner diameter, increasing volume 10-percent over the stock piping and resulting in a 40-percent increase in flow. The Mishimoto performance cold-side intercooler pipe includes two high-torque worm gear clamps to ensure a secure connection, and is covered under the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2018 Ford Focus ST

Increase the airflow to your 1.6L EcoBoost with Mishimoto intercooler piping for the 2014-2019 Ford Fiesta ST. The stock Fiesta ST intercooler piping is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your hot hatch, Mishimoto's Fiesta ST intercooler piping will have no problem supporting the power you throw at them. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. Installation requires no modifications to the engine bay, as these Fiesta ST intercooler pipes are a direct fit and work with both the stock and the Mishimoto Fiesta ST intercooler. Mishimoto Fiesta ST intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2014-2016 Ford Fiesta ST

Increase the airflow to your 1.6L EcoBoost with Mishimoto intercooler piping for the 2014-2019 Ford Fiesta ST. The stock Fiesta ST intercooler piping is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your hot hatch, Mishimoto's Fiesta ST intercooler piping will have no problem supporting the power you throw at them. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. Installation requires no modifications to the engine bay, as these Fiesta ST intercooler pipes are a direct fit and work with both the stock and the Mishimoto Fiesta ST intercooler. Mishimoto Fiesta ST intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2014-2016 Ford Fiesta ST

Increase the airflow to your 1.6L EcoBoost with the Mishimoto hot-side Fiesta ST intercooler pipe kit for the 2014-2019 Ford Fiesta ST. The stock hot-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. These hot-side Fiesta ST intercooler pipes feature durable silicone couplers and stainless steel T-bolt clamps to insure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as Mishimoto's Fiesta ST intercooler piping is a direct fit and works with both the stock and Mishimoto performance Fiesta ST intercooler. The Mishimoto Fiesta ST hot-side intercooler pipe kit is available in either a polished or wrinkle black finish and, like all of our Fiesta ST parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2014-2016 Ford Fiesta ST

Increase the airflow to your 1.6L EcoBoost with the Mishimoto hot-side Fiesta ST intercooler pipe kit for the 2014-2019 Ford Fiesta ST. The stock hot-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. These hot-side Fiesta ST intercooler pipes feature durable silicone couplers and stainless steel T-bolt clamps to insure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as Mishimoto's Fiesta ST intercooler piping is a direct fit and works with both the stock and Mishimoto performance Fiesta ST intercooler. The Mishimoto Fiesta ST hot-side intercooler pipe kit is available in either a polished or wrinkle black finish and, like all of our Fiesta ST parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2014-2016 Ford Fiesta ST

Increase the airflow to your 1.6L EcoBoost with the Mishimoto Fiesta ST cold-side intercooler pipe kit for the 2014-2019 Ford Fiesta ST. The stock cold-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. Plastic is always a material Mishimoto'strives to eliminate, and the stock cold-side Fiesta ST intercooler pipe is unacceptable. The stock pipe is constructed completely of weak plastic that is bound to leak over time. The Mishimoto cold-side intercooler pipe is comprised entirely of lightweight aluminum and features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's cold-side Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps to ensure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as these cold-side Fiesta ST intercooler pipes are a direct fit and work with both the stock and Mishimoto performance Fiesta ST intercoolers. Mishimoto's Fiesta ST cold-side intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2014-2016 Ford Fiesta ST

Increase the airflow to your 1.6L EcoBoost with the Mishimoto Fiesta ST cold-side intercooler pipe kit for the 2014-2019 Ford Fiesta ST. The stock cold-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. Plastic is always a material Mishimoto'strives to eliminate, and the stock cold-side Fiesta ST intercooler pipe is unacceptable. The stock pipe is constructed completely of weak plastic that is bound to leak over time. The Mishimoto cold-side intercooler pipe is comprised entirely of lightweight aluminum and features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's cold-side Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps to ensure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as these cold-side Fiesta ST intercooler pipes are a direct fit and work with both the stock and Mishimoto performance Fiesta ST intercoolers. Mishimoto's Fiesta ST cold-side intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2014-2016 Ford Fiesta ST

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost and style flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color matched charge pipe kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a lifetime of performance.This Part Fits: Year Make Model Submodel 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT?s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, It's not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55?s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and OEM styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Performance Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation.This Part Fits: Year Make Model Submodel 2016-2018 BMW M2 Base 2019-2020 BMW M2 Competition 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Mishimoto has developed a direct-fit 2017-2021 3.5L F-150 EcoBoost Intercooler Pipe kit that allows owners to maximize the performance potential of their F-150 or second-gen Raptor. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore? technology. The larger volume of our pipes allows your 2017-2021 3.5L F-150 EcoBoost to breathe freely and make the most of the its two turbochargers. DuraCore? boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every F-150 EcoBoost or second-gen Raptor from the show to the track. Combine this kit with the Mishimoto 2015-2021 F-150 EcoBoost Intercooler to unleash everything the twin-turbo 3.5L EcoBoost engine is capable of. As with all Mishimoto products, this 2017-2021 3.5L F-150 EcoBoost Intercooler Pipe kit is backed by our Lifetime Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2022 Ford F-150 King Ranch 2015-2022 Ford F-150 Lariat 2016-2022 Ford F-150 Limited 2015-2022 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2017-2022 Ford F-150 Raptor 2016-2022 Ford F-150 SSV 2021-2022 Ford F-150 Tremor 2015-2022 Ford F-150 XL 2015-2022 Ford F-150 XLT

Mishimoto has developed a direct-fit 2017-2021 3.5L F-150 EcoBoost Intercooler Pipe kit that allows owners to maximize the performance potential of their F-150 or second-gen Raptor. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore? technology. The larger volume of our pipes allows your 2017-2021 3.5L F-150 EcoBoost to breathe freely and make the most of the its two turbochargers. DuraCore? boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every F-150 EcoBoost or second-gen Raptor from the show to the track. Combine this kit with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 3.5L EcoBoost engine is capable of. As with all Mishimoto products, this 2017-2021 3.5L F-150 EcoBoost Intercooler Pipe kit is backed by our Lifetime Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2022 Ford F-150 King Ranch 2015-2022 Ford F-150 Lariat 2016-2022 Ford F-150 Limited 2015-2022 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2017-2022 Ford F-150 Raptor 2016-2022 Ford F-150 SSV 2021-2022 Ford F-150 Tremor 2015-2022 Ford F-150 XL 2015-2022 Ford F-150 XLT