Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1996,1998-2001 Jeep Cherokee Classic 1996-1997 Jeep Cherokee Country 1998-2001 Jeep Cherokee Limited 1996-2001 Jeep Cherokee SE 1996-2001 Jeep Cherokee Sport 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Wrangler 65th Anniversary Edition 2003-2006 Jeep Wrangler Rubicon 1997-2004 Jeep Wrangler Sahara 1997-2006 Jeep Wrangler SE 1997-2006 Jeep Wrangler Sport 2004-2006 Jeep Wrangler Unlimited 2005-2006 Jeep Wrangler Unlimited Rubicon 2002-2006 Jeep Wrangler X

HPS black high temp 3-ply reinforced silicone radiator and heater hose kit (part number 57-1690-BLK) replaces 1993-1998 Jeep Grand Cherokee ZJ 4.0L I6 Left Hand Drive stock OEM rubber upper and lower radiator hoses and heater coolant hoses with premium grade high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F). Compared to the local auto parts store universal hoses, HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fitment. HPS silicone coolant hose kit includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses. HPS silicone hoses can prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant hoses. Excellent for extreme ambient and radiant temperature conditions, HPS silicone hoses can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during daily driving or racing competition. HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty. Made with correct bends and curves for perfect fitment. Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant radiator heater hoses. Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat. Includes 100 percent stainless steel industrial grade embossed hose clamps which would not cut through the silicone hoses. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880570 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

Yukon 1541H alloy replacement right hand rear axle for Dana 44-Super(Hydra-Lok only), with a length of 29.34 inches and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a bolt-in axle.Installation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1998 Jeep Grand Cherokee 5.9 Limited 2006 Jeep Grand Cherokee 65th Anniversary Edition 1993 Jeep Grand Cherokee Base 1993-2008 Jeep Grand Cherokee Laredo 1993-2008 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 2002-2004,2006-2008 Jeep Grand Cherokee Overland 1994-1995 Jeep Grand Cherokee SE 2004 Jeep Grand Cherokee Special Edition 2002 Jeep Grand Cherokee Sport 2006-2008 Jeep Grand Cherokee SRT8 1997-1998 Jeep Grand Cherokee TSi

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4451226. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1996-1998 Jeep Grand Cherokee and 1996-1997 Jeep Cherokee. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 1996 Jeep Cherokee Classic 1996-1997 Jeep Cherokee Country 1996-1997 Jeep Cherokee SE 1996-1997 Jeep Cherokee Sport 1998 Jeep Grand Cherokee 5.9 Limited 1996-1998 Jeep Grand Cherokee Laredo 1996-1998 Jeep Grand Cherokee Limited 1997 Jeep Grand Cherokee Orvis 1997-1998 Jeep Grand Cherokee TSi

Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon Engineers use state-of-the art design & testing processes, backed by 2 in-house quality labs to ensure each item manufactured meets exacting specifications & quality standards. Yukon designed gear tooth surface finish reduces both friction & heat for long races & high torque conditions. We use high grade steel in both the ring & pinion, with fitment designed to OEM specs. Go ahead, add loads of horsepower & go big on tires because Yukon offers the widest selection of gear ratios to choose from. You?ll know that your gear choice was the right one, because you chose Yukon. Yukon Ring & Pinions come with a 1 year warranty against manufacture defects. Yukon offers a Y.E.S. Plan for a lifetime, comprehensive, no-questions-asked protection plan covering your gears for as long as you own the vehicle.Installation InstructionsInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2010-2011 Dodge Nitro Detonator 2010-2011 Dodge Nitro Heat 2007-2009 Dodge Nitro R/T 2009-2011 Dodge Nitro SE 2010-2011 Dodge Nitro Shock 2007-2009 Dodge Nitro SLT 2007-2008,2010-2011 Dodge Nitro SXT 1996,1998-2001 Jeep Cherokee Classic 1996-1997 Jeep Cherokee Country 1998-2001 Jeep Cherokee Limited 1996-2001 Jeep Cherokee SE 1996-2001 Jeep Cherokee Sport 1998 Jeep Grand Cherokee 5.9 Limited 1996-2004 Jeep Grand Cherokee Laredo 1996-2004 Jeep Grand Cherokee Limited 1997 Jeep Grand Cherokee Orvis 2002-2004 Jeep Grand Cherokee Overland 2004 Jeep Grand Cherokee Special Edition 2002 Jeep Grand Cherokee Sport 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Wrangler 65th Anniversary Edition 2003-2006 Jeep Wrangler Rubicon 1997-2004 Jeep Wrangler Sahara 1997-2006 Jeep Wrangler SE 1997-2006 Jeep Wrangler Sport 2004-2006 Jeep Wrangler Unlimited 2005-2006 Jeep Wrangler Unlimited Rubicon 2002-2006 Jeep Wrangler X

Whether you're winding your way through the scenic route or heading out for your morning commute, nothing makes it easier to enjoy the drive than the original Ventvisor by AVS. Externally mounted and made of impact-resistant acrylic, this curved side window de?ector will shield you from whatever weather comes your way. But it does more than just protect you from the elements -- it refreshes your ride by circulating air and eliminating unwanted odors. When your cab gets musty or wet and your windows start to fog, just roll them down and air it out without worrying about the weather. The Ventvisor is made from ultra-tough materials with a UV resistant finish that refuses to fade, even after extended sun exposure. Its high-grade acrylic material is just the right thickness to be strong yet ?exible and comes precision-engineered to fit your vehicle's year, make, and model. Installation is a breeze with no drilling or special hardware required -- attach with the included 3M automotive grade adhesive and you're ready to hit the road. Plus, it's backed by a Limited Lifetime Warranty. Proudly made in the USA with global materials.Installation InstructionsWarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi

Because Jeep enthusiasts need power from idle to 3000 RPM, Gibson designed their jeep exhaust to enhance low and mid range power for climbing and towing. This single exhaust exits straight out the back, Complemented with polished Stainless Tip. Hassle free, bolt-on installation with professional looking results. Backed by a Lifetime Limited Warranty.This Part Fits: Year Make Model Submodel 1996-1997 Jeep Grand Cherokee Laredo 1996-1997 Jeep Grand Cherokee Limited 1997 Jeep Grand Cherokee Orvis 1997 Jeep Grand Cherokee TSi

This Heavy Duty RLTF Trackmount system is attached to a set of Trackmounts Rhino-Rack have designed specifically for your vehicle's roof. This product fits permanently to your vehicle providing a sleek and ultimately stable roof rack system. The high profile design is ideal for highly curved roofs and when extra height is required to level out multiple bars. Lifetime warranty is the surest guarantee that we trust the Heavy Duty RLTF Trackmount system for all your outdoor and adventure needs.This Part Fits: Year Make Model Submodel 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi

For extreme off-road use, there's nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.Certificate of OriginInstallation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi

Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy's proprietary Hyper-Flex(TM) material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi 2006 Jeep Wrangler 65th Anniversary Edition 2003-2006 Jeep Wrangler Rubicon 1997-2004 Jeep Wrangler Sahara 1997-2006 Jeep Wrangler SE 1997-2006 Jeep Wrangler Sport 2004-2006 Jeep Wrangler Unlimited 2005-2006 Jeep Wrangler Unlimited Rubicon 2002-2006 Jeep Wrangler X

CSF 93-98 Jeep Grand Cherokee 5.2L OEM Plastic Radiator

The Rhino-Rack RLTF Legs are attached to your roof via a set of removable mounting brackets or Rhino's own tracks. Its high profile design is ideal for highly curved roofs or when the extra height is required to level out multiple bars. Rhino-Rack RLTF Legs are compatible with Rhino-Rack HD Bars and Vortex Bars.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2009 Dodge Sprinter 2500 Base 2007-2009 Dodge Sprinter 3500 Base 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi 2007-2009 Land Rover LR3 HSE 2009 Land Rover LR3 HSE Lux 2007-2008 Land Rover LR3 SE 2011 Land Rover LR4 Base 2010-2011 Land Rover LR4 HSE 2010 Land Rover LR4 V8 2010 Mercedes-Benz Sprinter 2500 Base 2010 Mercedes-Benz Sprinter 3500 Base 1991-1997 Toyota Previa DX 1991-1997 Toyota Previa LE