Snow Performance Hi-ram Water/Meth injection plate.

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 4 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder. NOTE: Nozzles not included and must be purchased separately.

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Chevy/ GMC LBZ / LLY/ LMM / LML / L5P Diesel Duramax! The Snow Performance Diesel Stage 2 Boost Cooler is available for all Duramax owners looking to have the benefit of water-methanol injection through out the Duramax's boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Chevy / GMC Duramax's that see light towing.This Part Fits: Year Make Model Submodel 2006-2010 Chevrolet Express 2500 Base 2006 Chevrolet Express 2500 LS 2006 Chevrolet Express 2500 LT 2006-2010 Chevrolet Express 3500 Base 2001-2005 Chevrolet Silverado 2500 HD Base 2020 Chevrolet Silverado 2500 HD Custom 2015-2020 Chevrolet Silverado 2500 HD High Country 2001-2006 Chevrolet Silverado 2500 HD LS 2001-2020 Chevrolet Silverado 2500 HD LT 2007-2020 Chevrolet Silverado 2500 HD LTZ 2004-2020 Chevrolet Silverado 2500 HD WT 2007 Chevrolet Silverado 2500 HD Classic LS 2007 Chevrolet Silverado 2500 HD Classic LT 2007 Chevrolet Silverado 2500 HD Classic WT 2001-2005 Chevrolet Silverado 3500 Base 2001-2006 Chevrolet Silverado 3500 LS 2001-2006 Chevrolet Silverado 3500 LT 2004,2006 Chevrolet Silverado 3500 WT 2007 Chevrolet Silverado 3500 Classic LS 2007 Chevrolet Silverado 3500 Classic LT 2007 Chevrolet Silverado 3500 Classic WT 2015-2020 Chevrolet Silverado 3500 HD High Country 2007-2020 Chevrolet Silverado 3500 HD LT 2007-2020 Chevrolet Silverado 3500 HD LTZ 2007-2020 Chevrolet Silverado 3500 HD WT 2006-2010 GMC Savana 2500 Base 2006-2010 GMC Savana 3500 Base 2020 GMC Sierra 2500 HD AT4 2002-2005,2015-2020 GMC Sierra 2500 HD Base 2011-2020 GMC Sierra 2500 HD Denali 2001-2002,2006 GMC Sierra 2500 HD SL 2001-2020 GMC Sierra 2500 HD SLE 2001-2020 GMC Sierra 2500 HD SLT 2003-2014 GMC Sierra 2500 HD WT 2007 GMC Sierra 2500 HD Classic SL 2007 GMC Sierra 2500 HD Classic SLE 2007 GMC Sierra 2500 HD Classic SLT 2007 GMC Sierra 2500 HD Classic WT 2002-2005 GMC Sierra 3500 Base 2001-2002,2006 GMC Sierra 3500 SL 2001-2006 GMC Sierra 3500 SLE 2001-2006 GMC Sierra 3500 SLT 2004-2006 GMC Sierra 3500 WT 2007 GMC Sierra 3500 Classic SL 2007 GMC Sierra 3500 Classic SLE 2007 GMC Sierra 3500 Classic SLT 2007 GMC Sierra 3500 Classic WT 2020 GMC Sierra 3500 HD AT4 2015-2020 GMC Sierra 3500 HD Base 2011-2020 GMC Sierra 3500 HD Denali 2007-2020 GMC Sierra 3500 HD SLE 2007-2020 GMC Sierra 3500 HD SLT 2007-2014 GMC Sierra 3500 HD WT 2006 Hummer H1 Alpha

Snow Performance Water Methanol Injection Nozzle 25GPH

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 (ISO 9001 Manufactured) controller offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors.. Comes with easy to install quick-connect fittings and 1/4" high temp nylon tubing.Installation Instructions

If you're looking for an offshore piece of junk regulator, this product is not for you! If you're looking for the best performing regulator on the market that is designed and built in the USA from the highest quality components available, this is your regulator. Snow Performance's High Flow Billet Fuel Pressure Regulator sets itself apart from the competition with anodized billet aluminum internal components, a Fluorosilicone coated Nomex diaphragm, and a silicon nitride ceramic ball which will never corrode, making this regulator safe for any type of fuel. Combine all these features with a corrosion-resistant spring, and a black anodized CNC machined aluminum body, your result is a fuel pressure regulator that responds lightning fast to your vehicle's ever-changing fuel flow demands and is compatible with any type of fuel, INCLUDING E-85 and METHANOL!,, Features:,, Made in the USA, Adjustable from 35-100psi, Two 8AN ORB inlet/outlet ports, 8AN ORB Return Port, 1/8 hose barb for 1:1 vacuum/boost reference, 1/8 NPT gauge port

Need to run a second nozzle on your Snow Performance water-methanol injection kit? The dual nozzle upgrade comes with the necessary fittings/plumbing to run a second water-methanol nozzle. (4AN Fittings) (Nozzle not included)

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps?Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit.Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH).These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol.This Part Fits: Year Make Model Submodel 2005 Chevrolet Silverado 1500 Base 2016-2019 Chevrolet Silverado 1500 Custom 2019 Chevrolet Silverado 1500 Custom Trail Boss 2014-2019 Chevrolet Silverado 1500 High Country 2005-2006,2009-2013 Chevrolet Silverado 1500 Hybrid 2005-2013,2015-2018 Chevrolet Silverado 1500 LS 2005-2019 Chevrolet Silverado 1500 LT 2019 Chevrolet Silverado 1500 LT Trail Boss 2007-2019 Chevrolet Silverado 1500 LTZ 2019 Chevrolet Silverado 1500 RST 2005-2006 Chevrolet Silverado 1500 SS 2015-2019 Chevrolet Silverado 1500 SSV 2005-2019 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2005 Chevrolet Silverado 1500 Z71 Off-Road 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2005 Chevrolet Silverado 1500 HD Base 2005 Chevrolet Silverado 1500 HD LS 2005-2006 Chevrolet Silverado 1500 HD LT 2007 Chevrolet Silverado 1500 HD Classic LT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2019 GMC Sierra 1500 AT4 2005,2014-2019 GMC Sierra 1500 Base 2005-2019 GMC Sierra 1500 Denali 2019 GMC Sierra 1500 Elevation 2005-2006,2009-2013 GMC Sierra 1500 Hybrid 2006-2013 GMC Sierra 1500 SL 2005-2019 GMC Sierra 1500 SLE 2005-2019 GMC Sierra 1500 SLT 2005-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2005-2006 GMC Sierra 1500 HD SLE 2005-2006 GMC Sierra 1500 HD SLT 2007 GMC Sierra 1500 HD Classic SLE 2007 GMC Sierra 1500 HD Classic SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE

The all new VC-50 water methanol injection controller from Snow Performance gives you the benefits of a boost gauge and water methanol controller/fail safe all in one! Heavily loaded, the VC-50 controller comes with built in manifold absolute pressure sensor that proportionality injects more or less water methanol according to boost pressure. Start and full points are adjustable to match what the engine requires. New dual tone 7 color (white, green, blue, red, orange, purple, yellow) OLED screen shows boost, percentage of injection, low level, second stage activation, and fault codes in a bright easy to read screen.

The Snow Performance VC-100 brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3.5 creates a 2D injection map based on boost and fuel pressure sensor input to deliver a highly accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling , ,

New Snow Performance low profile nozzle holders securely connect your water-methanol nozzle to 1/4" High Temp Nylon Tubing. Available in elbow and straight fittings.

Snow Performance 4 Cylinder Direct Port Water Methanol Distribution Block

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.Installation Instructions

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke! The Snow Performance Diesel Stage 2 Boost Cooler is available for all Ford Powerstroke owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford Powerstrokes that see light towing.

The stage 3 controller from Snow Performance stands as the most advanced water-methanol injection controller on the planet. Utilizing boost/fuel injector pulse width to command injection, the stage 3 will create a 2D MAP to calculate load of the engine and inject precise amounts of water-methanol exactly when your vehicle needs it. Taking it one step further, the stage 3 commands 2 nozzles independently of one another to ensure exact amounts of water-methanol is injected at all engine load states of the vehicle. If you are looking for the most sophisticated water-meth controller on the market look no further than the Snow Performance Stage 3.

Want to know when your water-meth supply is running low from the cab of any vehicle? The self sealing low level sensor upgrade is designed to be used with any water-methanol tank and alert the user of a low level situation. Comes complete with LED alert system.

Water-Methanol Line For Use With all Water-Methanol Injection Kits Utilizing 1/4" Quick Connect Fittings, 100% methanol resistant.

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) applications. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) Dodge Challenger/Chargers with 5.7 / 6.1 / 6.4 engine.This Part Fits: Year Make Model Submodel 2015-2020 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2020 Subaru WRX STI Limited 2016 Subaru WRX STI Series.HyperBlue 2018 Subaru WRX STI Type RA

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all turbo diesel owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel vehicles that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! This system is 50-State Legal! (C.A.R.B E.0.# D-723).

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstrokes that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)This Part Fits: Year Make Model Submodel 2003-2005 Ford E-350 Club Wagon Chateau 2003-2005 Ford E-350 Club Wagon XL 2003-2005 Ford E-350 Club Wagon XLT 1995-1998 Ford E-350 Econoline Base 1995-1998 Ford E-350 Econoline XL 1995-2002 Ford E-350 Econoline Club Wagon Chateau 1995-1996 Ford E-350 Econoline Club Wagon Chateau HD 1995-2000 Ford E-350 Econoline Club Wagon Custom 2001-2002 Ford E-350 Econoline Club Wagon XL 1995-1998 Ford E-350 Econoline Club Wagon XL HD 1995-2002 Ford E-350 Econoline Club Wagon XLT 1995-1998 Ford E-350 Econoline Club Wagon XLT HD 1999-2010 Ford E-350 Super Duty Base 2006 Ford E-350 Super Duty Chateau 1999-2000,2006-2008,2010 Ford E-350 Super Duty XL 2006-2010 Ford E-350 Super Duty XLT 2003-2005 Ford Excursion Eddie Bauer 2000-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2000-2005 Ford Excursion XLT 1995-1996 Ford F-250 Eddie Bauer 1995-1996 Ford F-250 Special 1993-1996 Ford F-250 XL 1993-1996 Ford F-250 XLT 1997 Ford F-250 HD XL 1997 Ford F-250 HD XLT 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2004-2010 Ford F-250 Super Duty Harley-Davidson Edition 2004-2020 Ford F-250 Super Duty King Ranch 1999-2020 Ford F-250 Super Duty Lariat 2018-2020 Ford F-250 Super Duty Limited 2013-2020 Ford F-250 Super Duty Platinum 1999-2020 Ford F-250 Super Duty XL 1999-2020 Ford F-250 Super Duty XLT 1997 Ford F-350 Base 1995 Ford F-350 Eddie Bauer 1995-1996 Ford F-350 Special 1993-1997 Ford F-350 XL 1993-1997 Ford F-350 XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2004-2010 Ford F-350 Super Duty Harley-Davidson Edition 2003-2020 Ford F-350 Super Duty King Ranch 1999-2020 Ford F-350 Super Duty Lariat 2018-2020 Ford F-350 Super Duty Limited 2013-2020 Ford F-350 Super Duty Platinum 1999-2020 Ford F-350 Super Duty XL 1999-2020 Ford F-350 Super Duty XLT

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 8 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder. NOTE: Nozzles not included and must be purchased separately.

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 2 4CYL distribution block, 2high flow solenoids, and all plumbing to install a nozzle in each cylinder. NOTE: Nozzles not included and must be purchased separately.

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for your 2005+ Subaru WRX STI equipped with the 2.5L engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2005-2014 Subaru WRX STI 2.5L engines.This Part Fits: Year Make Model Submodel 2004-2014 Subaru Impreza WRX STI 2007,2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 5.9L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 5.9L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system.This Part Fits: Year Make Model Submodel 1989-1993 Dodge D250 Base 1989-1993 Dodge D350 Base 1994-2002 Dodge Ram 2500 Base 2003,2005-2007 Dodge Ram 2500 Laramie 2003-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2003-2009 Dodge Ram 2500 ST 2006-2007 Dodge Ram 2500 TRX4 1994-2002 Dodge Ram 3500 Base 2003-2007 Dodge Ram 3500 Laramie 2003-2007 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2003-2007 Dodge Ram 3500 ST 2007 Dodge Ram 3500 TRX4 1989-1993 Dodge W250 Base 1989-1993 Dodge W350 Base

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 6 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder. NOTE: Nozzles not included and must be purchased separately.

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 4 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately.

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) 2010-2015 Gen 5 Chevy Camaro SS 6.2L LS3 engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2010-2015 Camaro SS 6.2L.This Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro SS 2012-2015 Chevrolet Camaro ZL1

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps?Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit.Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH).These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol.

1" thick adapter plates allow for a clean and easy install of any Snow Performance nozzles on carbureted applications using a Holley, Edlebrock, or Carter 4150 Carburetor. Comes with necessary gaskets/studs needed for install. (Machined with (2) 1/8" NPT ports) Warning! When using a injection plate a solenoid upgrade part# 40060 must be used to prevent vacuum siphoning.

Snow Performance Throttle Body Spacer Injection Plates are the easiest, best selling way to mount water-meth or nitrous nozzles on your 2011-2017 Ford F-150 3.5L EcoBoost. Simply fit between the throttle body and intake manifold and enjoy custom placement of two 1/8" NPT ports. Warning! When using a throttle body injection plate a solenoid upgrade part# 40060 must be used to prevent vacuum siphoning.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2015 Ford F-150 King Ranch 2011-2015 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2011-2015 Ford F-150 Platinum 2011-2015 Ford F-150 XL 2011-2015 Ford F-150 XLT

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 6 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately.

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Diesel! The Snow Performance Diesel Stage 2 Boost Cooler is available for all diesel truck owners looking to have the benefit of water-methanol injection through out the trucks boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel trucks that see light towing.

Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.This Part Fits: Year Make Model Submodel 2013-2015 Ford Focus ST

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a progressive controller with built in manifold absolute pressure (MAP) sensor that proportionally injects more or less water-methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. Comes with adjustable progressive VC-20 engine mount controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.Installation Instructions

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Diesel! The Snow Performance Diesel Stage 2 Boost Cooler is available for all diesel truck owners looking to have the benefit of water-methanol injection through out the trucks boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel trucks that see light towing.

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) Dodge Challengers/Chargers with the 5.7 / 6.1 / 6.4 engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) Dodge Challenger/Chargers with 5.7 / 6.1 / 6.4 engine.This Part Fits: Year Make Model Submodel 2013 Chrysler 300 Base 2008-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2008-2010 Chrysler 300 C SRT8 2018 Chrysler 300 Limited 2010,2012-2020 Chrysler 300 S 2012-2014 Chrysler 300 SRT8 2013 Chrysler 300 SRT8 Core 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2009-2020 Dodge Challenger R/T 2017-2019 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016-2020 Dodge Challenger R/T Scat Pack 2019-2020 Dodge Challenger R/T Scat Pack Widebody 2016 Dodge Challenger R/T Shaker 2015 Dodge Challenger Scat Pack 2015-2018 Dodge Challenger SRT 392 2008-2014 Dodge Challenger SRT8 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392 2017-2018 Dodge Charger Daytona 2017-2018 Dodge Charger Daytona 392 2008-2020 Dodge Charger Pursuit 2008-2020 Dodge Charger R/T 2017-2018 Dodge Charger R/T 392 2015-2016 Dodge Charger R/T Road & Track 2015-2018 Dodge Charger R/T Scat Pack 2019-2020 Dodge Charger Scat Pack 2020 Dodge Charger Scat Pack 392 Widebody 2008-2013 Dodge Charger SE 2015-2018 Dodge Charger SRT 392 2008-2010,2012-2014 Dodge Charger SRT8 2008 Dodge Magnum R/T 2008 Dodge Magnum SRT8