Nissan 90-96 300ZX Twin Turbo HPS High Temp 4-ply Reinforced Silicone Intercooler Turbo Hoses Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon intercooler turbo hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone intercooler hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber intercooler hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel T-Bolt Clamps are included for easy installation. This product fits Nissan 1990-1996 300ZX Twin Turbo. OEM fitment has all the correct bends and curves for a perfect fit replacement on your 300ZX Twin Turbo with stock intercooler and turbo setup. No cutting or trimming is required. Made with correct bends and curves for perfect fitment. Material: 4-Ply Reinforced Polyester with High Temp Silicone. Max. Temp Rating: 350 deg. F (177 deg. C) HPS 100% Stainless Steel T-Bolt Clamps are included for easy installation Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition Attributes: GTIN: 00648044855653 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

The HPS Performance 7/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 7/8 inch inside diameter (22mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels.Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 41 psi. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 5-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 41psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891187 Brand Name: HPS Performance Inside Diameter: 22 Length: 9 Feet Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

The HPS Performance 7/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 7/8 inch inside diameter (22mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels.Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 41 psi. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 5-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 41psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891101 Brand Name: HPS Performance Inside Diameter: 22 Length: 9 Feet Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

The HPS Performance 3/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/4 inch (19mm) inside diameter can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 47 psi. Hose Inside Diameter: 3/4" (19mm). Hose Outside Diameter: 1.06" (27mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 47psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891194 Brand Name: HPS Performance Wall Thickness: 4mm Inside Diameter: 19 Length: 9 Feet Max Temp: 350F Outside Diameter: 27 Reinforced Layer: 1-ply Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 3/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/4 inch (19mm) inside diameter can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 47 psi. Hose Inside Diameter: 3/4" (19mm). Hose Outside Diameter: 1.06" (27mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 47psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891118 Brand Name: HPS Performance Inside Diameter: 19 Length: 9 Feet Max Temp: 350F Outside Diameter: 27 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 5/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/8 inch inside diameter (16mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 53 psi. Hose Inside Diameter: 0.62" (16mm). Hose Outside Diameter: 0.94" (24mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 53psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891200 Brand Name: HPS Performance Inside Diameter: 16 Length: 9 Feet Max Temp: 350F Outside Diameter: 24 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 5/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/8 inch inside diameter (16mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 53 psi. Hose Inside Diameter: 0.62" (16mm). Hose Outside Diameter: 0.94" (24mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 53psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891125 Brand Name: HPS Performance Inside Diameter: 16 Length: 9 Feet Max Temp: 350F Outside Diameter: 24 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 1/2" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with half inch inside diameter (13mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 55 psi. Hose Inside Diameter: 0.50" (13mm). Hose Outside Diameter: 0.83" (21mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891217 Brand Name: HPS Performance Inside Diameter: 13 Length: 9 Feet Max Temp: 350F Outside Diameter: 21 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 1/2" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with half inch inside diameter (13mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 55 psi. Hose Inside Diameter: 0.50" (13mm). Hose Outside Diameter: 0.83" (21mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891132 Brand Name: HPS Performance Inside Diameter: 13 Length: 9 Feet Max Temp: 350F Outside Diameter: 21 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 3/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/8 inch inside diameter (9.5mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 75 psi. Hose Inside Diameter: 0.38" (9.5mm). Hose Outside Diameter: 0.69" (17.5mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891224 Brand Name: HPS Performance Inside Diameter: 9.5 Length: 9 Feet Max Temp: 350F Outside Diameter: 17.5 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 9 x 3 inches Weight: 2 lb

The HPS Performance 3/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/8 inch inside diameter (9.5mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 75 psi. Hose Inside Diameter: 0.38" (9.5mm). Hose Outside Diameter: 0.69" (17.5mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891149 Brand Name: HPS Performance Inside Diameter: 9.5 Length: 9 Feet Max Temp: 350F Outside Diameter: 17.5 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 9 x 3 inches Weight: 2 lb

The HPS Performance 5/16" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/16 inch inside diameter (8mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 90 psi. Hose Inside Diameter: 5/16" (8mm). Hose Outside Diameter: 5/8" (16mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891231 Brand Name: HPS Performance Inside Diameter: 8 Length: 9 Feet Max Temp: 350F Outside Diameter: 16 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 9 x 3 inches Weight: 2 lb

The HPS Performance 5/16" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/16 inch inside diameter (8mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 90 psi. Hose Inside Diameter: 5/16" (8mm). Hose Outside Diameter: 5/8" (16mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891156 Brand Name: HPS Performance Inside Diameter: 8 Length: 9 Feet Max Temp: 350F Outside Diameter: 16 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 9 x 3 inches Weight: 2 lb

The HPS Performance 1/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with quarter inch inside diameter (6mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 93 psi. Hose Inside Diameter: 1/4" (6mm). Hose Outside Diameter: 9/16" (14mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/8". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891248 Brand Name: HPS Performance Inside Diameter: 6 Length: 9 Feet Max Temp: 350F Outside Diameter: 14 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 9 x 3 inches Weight: 2 lb

The HPS Performance 1/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with quarter inch inside diameter (6mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 93 psi. Hose Inside Diameter: 1/4" (6mm). Hose Outside Diameter: 9/16" (14mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/8". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891163 Brand Name: HPS Performance Inside Diameter: 6 Length: 9 Feet Max Temp: 350F Outside Diameter: 14 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 9 x 3 inches Weight: 2 lb

The HPS Performance 1" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with one inch inside diameter (25mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 34 psi. Hose Inside Diameter: 1.00" (25mm). Hose Outside Diameter: 1.30" (33mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/- 0.2mm. Bend Radius: 8". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 34psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891019 Brand Name: HPS Performance Inside Diameter: 25 Length: Sold per feet Max Temp: 350F Outside Diameter: 33 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 7/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 7/8 inch inside diameter (22mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels.Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 41 psi. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 5-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 41psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891026 Brand Name: HPS Performance Inside Diameter: 22 Length: Sold per feet Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 7/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 7/8 inch inside diameter (22mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels.Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 41 psi. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 5-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 41psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Attributes: GTIN: 00648044890944 Brand Name: HPS Performance Inside Diameter: 22 Length: Sold per feet Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 3/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/4 inch (19mm) inside diameter can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 47 psi. Hose Inside Diameter: 3/4" (19mm). Hose Outside Diameter: 1.06" (27mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 47psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891033 Brand Name: HPS Performance Inside Diameter: 19 Length: Sold per feet Max Temp: 350F Outside Diameter: 27 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 5/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/8 inch inside diameter (16mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 53 psi. Hose Inside Diameter: 0.62" (16mm). Hose Outside Diameter: 0.94" (24mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 53psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044890968 Brand Name: HPS Performance Inside Diameter: 16 Length: Sold per feet Max Temp: 350F Outside Diameter: 24 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 1/2" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with half inch inside diameter (13mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 55 psi. Hose Inside Diameter: 0.50" (13mm). Hose Outside Diameter: 0.83" (21mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891057 Brand Name: HPS Performance Inside Diameter: 13 Length: Sold per feet Max Temp: 350F Outside Diameter: 21 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 1/2" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with half inch inside diameter (13mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 55 psi. Hose Inside Diameter: 0.50" (13mm). Hose Outside Diameter: 0.83" (21mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044890975 Brand Name: HPS Performance Inside Diameter: 13 Length: Sold per feet Max Temp: 350F Outside Diameter: 21 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 3/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/8 inch inside diameter (9.5mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 75 psi. Hose Inside Diameter: 0.38" (9.5mm). Hose Outside Diameter: 0.69" (17.5mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891064 Brand Name: HPS Performance Inside Diameter: 9.5 Length: Sold per feet Max Temp: 350F Outside Diameter: 17.5 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 3/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/8 inch inside diameter (9.5mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 75 psi. Hose Inside Diameter: 0.38" (9.5mm). Hose Outside Diameter: 0.69" (17.5mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044890982 Brand Name: HPS Performance Inside Diameter: 9.5 Length: Sold per feet Max Temp: 350F Outside Diameter: 17.5 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 5/16" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/16 inch inside diameter (8mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 90 psi. Hose Inside Diameter: 5/16" (8mm). Hose Outside Diameter: 5/8" (16mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891071 Brand Name: HPS Performance Inside Diameter: 8 Length: Sold per feet Max Temp: 350F Outside Diameter: 16 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 5/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/8 inch inside diameter (16mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 53 psi. Hose Inside Diameter: 0.62" (16mm). Hose Outside Diameter: 0.94" (24mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 53psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891040 Brand Name: HPS Performance Inside Diameter: 16 Length: Sold per feet Max Temp: 350F Outside Diameter: 24 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 5/16" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/16 inch inside diameter (8mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 90 psi. Hose Inside Diameter: 5/16" (8mm). Hose Outside Diameter: 5/8" (16mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044890999 Brand Name: HPS Performance Inside Diameter: 8 Length: Sold per feet Max Temp: 350F Outside Diameter: 16 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 1/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with quarter inch inside diameter (6mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 93 psi. Hose Inside Diameter: 1/4" (6mm). Hose Outside Diameter: 9/16" (14mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/8". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891088 Brand Name: HPS Performance Inside Diameter: 6 Length: Sold per feet Max Temp: 350F Outside Diameter: 14 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

The HPS Performance 1/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with quarter inch inside diameter (6mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 93 psi. Hose Inside Diameter: 1/4" (6mm). Hose Outside Diameter: 9/16" (14mm). Length: Sold per Feet (Maximum 9 Feet). Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 1-1/8". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891002 Brand Name: HPS Performance Inside Diameter: 6 Length: Sold per feet Max Temp: 350F Outside Diameter: 14 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

HPS 8" (200mm), 6" Long High Temp 4-ply Aramid Reinforced Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication. Technical Specification: Product Type: Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 8" (200mm). Hose Outside Diameter: 8.27" (210mm). Hose Length: 6". Number of Rings: 3. Wall Thickness: 4.5mm (+/- 0.5mm). UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044825489 Brand Name: HPS Performance Inside Diameter: 200 Length: 6" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 210 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 5 lb

HPS 6" (152mm) x 8" Long High Temp 4-ply Aramid Reinforced Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication. Technical Specification: Product Type: Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 6" (152mm). Hose Outside Diameter: 6.38" (162mm). Hose Length: 8". Number of Rings: 3. Wall Thickness: 4.5mm (+/- 0.5mm). UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044825472 Brand Name: HPS Performance Inside Diameter: 152 Length: 8" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 162 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 7 x 7 inches Weight: 3 lb

HPS 6" (152mm), 6" Long High Temp 4-ply Aramid Reinforced Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication. Technical Specification: Product Type: Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 6" (152mm). Hose Outside Diameter: 6.38" (162mm). Hose Length: 6". Number of Rings: 3. Wall Thickness: 4.5mm (+/- 0.5mm). UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044825465 Brand Name: HPS Performance Inside Diameter: 152 Length: 6" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 162 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 7 x 7 inches Weight: 3 lb

HPS 6" (152mm), 6" Long High Temp 4-ply Reinforced Silicone Charge Air Cooler CAC Hose Cold Side meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication. Technical Specification: Product Type: Silicone Charge Air Cooler CAC Hose Cold Side. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 6" (152mm). Hose Outside Diameter: 6.38" (162mm). Hose Length: 6". Number of Rings: 3. Wall Thickness: 4.5mm (+/- 0.5mm). UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044825458 Brand Name: HPS Performance Inside Diameter: 152 Length: 6" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 162 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 7 x 7 inches Weight: 3 lb

HPS 5" (127mm) x 8" Long High Temp 4-ply Aramid Reinforced Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication. Technical Specification: Product Type: Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 5" (127mm). Hose Outside Diameter: 5.39" (137mm). Hose Length: 8". Number of Rings: 3. Wall Thickness: 4.5mm (+/- 0.5mm). UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044825441 Brand Name: HPS Performance Inside Diameter: 127 Length: 8" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 137 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 7 x 7 inches Weight: 3 lb

HPS 5" (127mm) x 8" Long High Temp 4-ply Reinforced Silicone Charge Air Cooler CAC Hose Cold Side meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication. Technical Specification: Product Type: Silicone Charge Air Cooler CAC Hose Cold Side. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 5" (127mm). Hose Outside Diameter: 5.43" (138mm). Hose Length: 8". Number of Rings: 3. Wall Thickness: 4.5mm (+/- 0.5mm). UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044825434 Brand Name: HPS Performance Inside Diameter: 127 Length: 8" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 138 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 10 x 10 inches Weight: 2.5 lb

HPS 8" (200mm) x 12" Long High Temp 8-ply Aramid Reinforced Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication. Technical Specification: Product Type: Silicone Charge Air Cooler CAC Hose Coupler Hot Side Bellow. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 8-ply Aramid. Hose Inside Diameter: 8" (200mm). Hose Outside Diameter: 8.43" (214mm). Hose Length: 12". Number of Rings: 3. Wall Thickness: 7mm. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 8-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, designed and engineered to provide a connection between engine mounted charge air system components Ideal for handling slight misalignments and isolating vibration between hose ends; great for marine and industrial use, custom turbo or intercooler piping fabrication UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044825496 Brand Name: HPS Performance Inside Diameter: 200 Length: 12" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 214 Reinforced Layer: 8-ply Aramid Wall Thickness: 7mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 10 x 10 inches Weight: 10 lb