The 4'' Ultimate System is available with our Uniball Upper Control Arms that feature .120'' wall 4130 Chromoly tubing with a 1.50'' OD 1'' FK Stainless PTFE Uniballs for 9'' of front wheel travel. The system also includes heavy duty ductile iron steering knuckles and forged adjusting torsion bar keys to provide the proper amount of lift without CV bind. The system will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1'' rear block kit is available. Uniball Upper Control Arms are available separately as an upgrade to stock, previously installed Fabtech'suspensions or other aftermarket suspension systems.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Zone Offroad 11-19 Chevrolet Silverado /GMC Sierra 1500/2500 HD 5in Torsion Bar Drop Lift Kit

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015 Chevrolet Silverado 2500 HD High Country 2011-2015 Chevrolet Silverado 2500 HD LT 2011-2015 Chevrolet Silverado 2500 HD LTZ 2011-2015 Chevrolet Silverado 2500 HD WT 2015 Chevrolet Silverado 3500 HD High Country 2011-2015 Chevrolet Silverado 3500 HD LT 2011-2015 Chevrolet Silverado 3500 HD LTZ 2011-2015 Chevrolet Silverado 3500 HD WT 2015 GMC Sierra 2500 HD Base 2011-2015 GMC Sierra 2500 HD Denali 2011-2015 GMC Sierra 2500 HD SLE 2011-2015 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015 GMC Sierra 3500 HD Base 2011-2015 GMC Sierra 3500 HD Denali 2011-2015 GMC Sierra 3500 HD SLE 2011-2015 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

The 4'' Ultimate System is available with our Uniball Upper Control Arms that feature .120'' wall 4130 Chromoly tubing with a 1.50'' OD 1'' FK Stainless PTFE Uniballs for 9'' of front wheel travel. The system also includes heavy duty ductile iron steering knuckles and forged adjusting torsion bar keys to provide the proper amount of lift without CV bind. The system will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1'' rear block kit is available. Uniball Upper Control Arms are available separately as an upgrade to stock, previously installed Fabtech'suspensions or other aftermarket suspension systems.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Rev up your ride with the Skyjacker 3-3.5 in. A-Arm Lift Kit engineered for GM 2500HD/3500HD models from 2011 to 2019. Designed for a 100% bolt-on installation, this lift kit offers a perfect fit and enhanced performance for both 2WD and 4WD configurations. Featuring high-strength DOM tubing reinforced with a 1/4-inch gusset plate stiffener, you can expect improved handling, durability, and a smoother ride.Key Features• 100% bolt-on installation with detailed instructions• High-strength DOM tubing with added gusset reinforcement• Optimized pivot ball joints for quicker alignment and easy maintenance• Greaseable fittings to extend component life• Includes torsion bar keys, a front differential spacer kit, rear blocks, and 2 unique rear Black Max B8500 shocksPerformance and DurabilityThis kit’s reinforced A-Arms and quality shock absorbers deliver a significant performance upgrade. Enjoy enhanced ride quality, increased rigidity, and a suspension system built to outperform OEM components, ensuring your truck remains at peak performance on any terrain.Why Choose SkyjackerChoose Skyjacker for its proven quality and reliable performance. Each component is designed to meet the demands of tough driving conditions while keeping maintenance simple. Compatible with various Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD models, this lift kit is a smart upgrade for both enthusiasts and professional drivers.For more Skyjacker products, visit our Skyjacker Collection. Upgrade your truck today and buy your Skyjacker lift kit for lasting performance and style.

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2014-2018 Chevrolet Silverado 2500 HD LT 2014-2018 Chevrolet Silverado 2500 HD LTZ 2014-2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2014-2018 GMC Sierra 2500 HD Denali 2014-2018 GMC Sierra 2500 HD SLE 2014-2018 GMC Sierra 2500 HD SLT 2014 GMC Sierra 2500 HD WT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Upgrade your ride with the Skyjacker 2011‑2019 GM 2500HD/3500HD 2WD/4WD 3‑3.5in UCA Lift Kit with Rear Hydro 7000 Shocks. Designed for dedicated enthusiasts and professional drivers, this Skyjacker lift kit delivers exceptional performance with its advanced rear hydro shocks and reinforced A-Arms made from high-strength DOM tubing. It’s a completely bolt‑on system that makes installation simple while enhancing durability and ride quality.Key Features & Technical Specs• Reinforced A-Arms – Built from high‑strength DOM tubing with a 1/4‑in gusset plate for increased rigidity.• Optimized Pivot Joints – Greasable design for faster alignment and longer service life.• Rear Hydro Shocks – Advanced Hydro 7000 shocks offer superior stability and a smoother ride.• Torsion Bar Keys & Front Differential Spacer – Improve overall suspension performance.• Complete System – Comes with rear blocks and additional Skyjacker shocks for a complete upgrade.Compatibility Details• Chevrolet Silverado 2500 HD (2011‑2019): High Country, LT, LTZ, WT.• Chevrolet Silverado 3500 HD (2011‑2019): High Country, LT, LTZ, WT.• GMC Sierra 2500 HD (2011‑2019): Base, Denali, SLE, SLT, WT.• GMC Sierra 3500 HD (2011‑2019): Base, Denali, SLE, SLT, WT.Note: Excludes vehicles equipped with Magnetic Ride Control.Experience the performance benefits and ease of installation by upgrading today. Learn more and shop our Suspension Lift Kits collection at https://www.everythingtruckparts.com/collections/suspension-lift-kits.

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Skyjacker Suspensions suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They help you get the right height, clearance, and attitude on your truck and maintain that factory ride quality, while improving handling. They come with all of the necessary mounting hardware and detailed instructions, and are available for 2WD or 4WD vehicles.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2015-2017 Chevrolet Silverado 3500 HD High Country 2011-2017 Chevrolet Silverado 3500 HD LT 2011-2017 Chevrolet Silverado 3500 HD LTZ 2011-2017 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2011-2018 GMC Sierra 2500 HD Denali 2011-2018 GMC Sierra 2500 HD SLE 2011-2018 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2017 GMC Sierra 3500 HD Base 2011-2017 GMC Sierra 3500 HD Denali 2011-2017 GMC Sierra 3500 HD SLE 2011-2017 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Skyjacker Suspensions suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They help you get the right height, clearance, and attitude on your truck and maintain that factory ride quality, while improving handling. They come with all of the necessary mounting hardware and detailed instructions, and are available for 2WD or 4WD vehicles.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2015-2017 Chevrolet Silverado 3500 HD High Country 2011-2017 Chevrolet Silverado 3500 HD LT 2011-2017 Chevrolet Silverado 3500 HD LTZ 2011-2017 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2011-2018 GMC Sierra 2500 HD Denali 2011-2018 GMC Sierra 2500 HD SLE 2011-2018 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2017 GMC Sierra 3500 HD Base 2011-2017 GMC Sierra 3500 HD Denali 2011-2017 GMC Sierra 3500 HD SLE 2011-2017 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

The 4 Budget System utilizes the factory front coil springs with a steel upper spacer providing 4 of lift. Radius Arm drop brackets retain the factory arms with correct caster setting for the increase ride height. System includes a Trac Bar relocation bracket that has been designed to center the axle under the vehicle and still works properly with the factory Pitman Arm. This eliminates the need to replace the Pitman Arm resulting in a lower cost and faster installation time. Rear lift is accomplished with lift blocks and extended length u-bolts. System allows installation of 35 tall tires with required inner fenderwell trimming for adequate tire clearance for street driving and light offroad use.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Experience a performance-enhancing upgrade with the Skyjacker 3-3.5 in. A-Arm kit. Built for durability using high-strength DOM tubing and precision OEM-aligned, greasable ball joints, this lift kit delivers increased ground clearance and superior off-road performance—all with an easy, 100% bolt-on installation.What’s Included Front A-Arms with integrated pivot ball joints Torsion Bar Keys Front Differential Spacer Kit Rear Blocks 2 Rear Skyjacker Monotube Shocks Value-added extras for enhanced performance Key Features & Benefits High-Strength DOM Tubing with 1/4” Gusset Plate: Engineered to endure extreme stresses while providing maximum rigidity. Greasable, Precision-Engineered Ball Joints: Maintain optimal OEM alignment for smoother, faster adjustments. 100% Bolt-On Installation: Enjoy a straightforward installation process that saves time and effort. Enhanced Off-Road Capability: Designed to support larger tires (up to 33-inch) for improved ground clearance. Compatibility Compatible with select 2011-2019 Chevrolet Silverado 2500 HD and Silverado 3500 HD models (including High Country, LT, LTZ, and WT trims) Fits 2011-2019 GMC Sierra 2500/3500 HD models Important DOES NOT fit models with rear overload springs or Magnetic Ride Control Professional installation is recommended for optimal results For more options, check out our Suspension Lift Kits.

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015-2017 Chevrolet Silverado 2500 HD High Country 2011-2017 Chevrolet Silverado 2500 HD LT 2011-2017 Chevrolet Silverado 2500 HD LTZ 2011-2017 Chevrolet Silverado 2500 HD WT 2015-2017 Chevrolet Silverado 3500 HD High Country 2011-2017 Chevrolet Silverado 3500 HD LT 2011-2017 Chevrolet Silverado 3500 HD LTZ 2011-2017 Chevrolet Silverado 3500 HD WT 2015-2017 GMC Sierra 2500 HD Base 2011-2017 GMC Sierra 2500 HD Denali 2011-2017 GMC Sierra 2500 HD SLE 2011-2017 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2017 GMC Sierra 3500 HD Base 2011-2017 GMC Sierra 3500 HD Denali 2011-2017 GMC Sierra 3500 HD SLE 2011-2017 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Established in 1975, Superlift remains a pioneer in the industry, and is one of the few suspension companies operated by true truck and off-road enthusiasts. We are passionate about trucks, wheeling and an outdoor lifestyle that go hand-in-hand. We can talk the talk because we walk the walk.This question.... ''What's best for the customer?''... is always at the top of our list in everything we do, from product planning and design to customer service. This simple guiding principal has served us well for decades, and will continue to guide us into the future.We are proud to provide the truck, Jeep and SUV owner products that perform better than advertised. We understand that most people spend the majority of their windshield time on-road, and our designs reflect this. You will be 100% satisfied with our products on-road or off - we guarantee it! Determining what product is right for your vehicle and lifestyle can be a complicated task, especially with so many companies and options to choose from. We urge you to carefully research your purchase. Most lift kits represent a considerable investment, and you will literally live with your choice for years. Talk to fellow off-roaders, and your local automotive specialty shop before making a purchase. We love to talk shop, and we encourage you to give our tech staff a call. Bottom line... if you do your homework, you'll discover that we've done ours.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Elevate your truck’s performance with the rugged Skyjacker lift kit for GM 2500HD and GM 3500HD. Designed as a 3-3.5-inch lift kit for GM trucks, it offers a precise fit and outstanding off-road capability. Its design seamlessly integrates with your factory suspension, boosting ground clearance while maintaining OEM geometry for a completely hassle-free bolt-on installation.Key Features• High-strength DOM tubing, reinforced with a 1/4-inch gusset plate stiffener, delivers maximum rigidity and durability.• Greasable pivot ball joints extend the life of the kit and simplify alignment, setting it apart from conventional kits.• Fully integrated with torsion bar keys, a front differential spacer kit, rear blocks, and two premium Skyjacker shocks to ensure balanced performance.• Built to handle demanding terrain, making it the perfect upgrade whether you’re a weekend explorer or a professional driver.This kit is engineered for GM trucks from 2011-2019, offering enhanced off-road dynamics and improved ride quality. Installation is straightforward, combining advanced shock technology with reinforced mounting hardware for uncompromised results. Enjoy the confidence of quality engineering backed by over 35 years of expertise.Discover more options in our Skyjacker collection and explore our range of Suspension Lift Kits for additional upgrades to your vehicle.

Arms eliminate upper ball joint w/ super strong 1in ID Stainless American Uniball. Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments. Allows for increased wheel travel when used with Dirt Logic 2.5 Coilover shocks. Chromoly tubing reduces flex found in stock arms for more positive road feel. 4340 Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature. Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Built with same materials as found on Trophy Trucks. .120in Wall 4130 Chromoly Tubing. 1.50in OD. .250in wall DOM Bushing Barrels. 1in ID Stainless Steel American Uniball. 17-4 Stainless MisalignmentsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2014-2018 Chevrolet Silverado 2500 HD LT 2014-2018 Chevrolet Silverado 2500 HD LTZ 2014-2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2014-2018 GMC Sierra 2500 HD Denali 2014-2018 GMC Sierra 2500 HD SLE 2014-2018 GMC Sierra 2500 HD SLT 2014 GMC Sierra 2500 HD WT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2015-2016,2018 Chevrolet Silverado 3500 HD High Country 2014-2016,2018 Chevrolet Silverado 3500 HD LT 2014-2016,2018 Chevrolet Silverado 3500 HD LTZ 2014-2016,2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2016,2018-2019 GMC Sierra 3500 HD Base 2014-2016,2018 GMC Sierra 3500 HD Denali 2014-2016,2018 GMC Sierra 3500 HD SLE 2014-2016,2018 GMC Sierra 3500 HD SLT 2014 GMC Sierra 3500 HD WT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Arms eliminate upper ball joint w/ super strong 1in ID Stainless American Uniball. Additional caster is built into Arms for greater align ability to help with problematic leveling kit alignments. Allows for increased wheel travel when used with Dirt Logic 2.5 Coilover shocks. Chromoly tubing reduces flex found in stock arms for more positive road feel. 4340 Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature. Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Built with same materials as found on Trophy Trucks. .120in Wall 4130 Chromoly Tubing. 1.50in OD. .250in wall DOM Bushing Barrels. 1in ID Stainless Steel American Uniball. 17-4 Stainless MisalignmentsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2014-2018 Chevrolet Silverado 2500 HD LT 2014-2018 Chevrolet Silverado 2500 HD LTZ 2014-2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2014-2018 GMC Sierra 2500 HD Denali 2014-2018 GMC Sierra 2500 HD SLE 2014-2018 GMC Sierra 2500 HD SLT 2014 GMC Sierra 2500 HD WT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Zone Offroad 11-19 Chevy/GMC HD 5in System w/Top Overload

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2018 Chevrolet Silverado 3500 HD High Country 2018 Chevrolet Silverado 3500 HD LT 2018 Chevrolet Silverado 3500 HD LTZ 2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2018-2019 GMC Sierra 3500 HD Base 2018 GMC Sierra 3500 HD Denali 2018 GMC Sierra 3500 HD SLE 2018 GMC Sierra 3500 HD SLT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015 Chevrolet Silverado 2500 HD High Country 2011-2015 Chevrolet Silverado 2500 HD LT 2011-2015 Chevrolet Silverado 2500 HD LTZ 2011-2015 Chevrolet Silverado 2500 HD WT 2015 Chevrolet Silverado 3500 HD High Country 2011-2015 Chevrolet Silverado 3500 HD LT 2011-2015 Chevrolet Silverado 3500 HD LTZ 2011-2015 Chevrolet Silverado 3500 HD WT 2015 GMC Sierra 2500 HD Base 2011-2015 GMC Sierra 2500 HD Denali 2011-2015 GMC Sierra 2500 HD SLE 2011-2015 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015 GMC Sierra 3500 HD Base 2011-2015 GMC Sierra 3500 HD Denali 2011-2015 GMC Sierra 3500 HD SLE 2011-2015 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Zone Offroad 11-19 Chevy/GMC 2500/3500 HD Torsion Bar Keys Leveling Kit

Established in 1975, Superlift remains a pioneer in the industry, and is one of the few suspension companies operated by true truck and off-road enthusiasts. We are passionate about trucks, wheeling and an outdoor lifestyle that go hand-in-hand. We can talk the talk because we walk the walk.This question.... ''What's best for the customer?''... is always at the top of our list in everything we do, from product planning and design to customer service. This simple guiding principal has served us well for decades, and will continue to guide us into the future.We are proud to provide the truck, Jeep and SUV owner products that perform better than advertised. We understand that most people spend the majority of their windshield time on-road, and our designs reflect this. You will be 100% satisfied with our products on-road or off - we guarantee it! Determining what product is right for your vehicle and lifestyle can be a complicated task, especially with so many companies and options to choose from. We urge you to carefully research your purchase. Most lift kits represent a considerable investment, and you will literally live with your choice for years. Talk to fellow off-roaders, and your local automotive specialty shop before making a purchase. We love to talk shop, and we encourage you to give our tech staff a call. Bottom line... if you do your homework, you'll discover that we've done ours.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2011-2019 GMC Sierra 3500 HD Denali 2011-2019 GMC Sierra 3500 HD SLE 2011-2019 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Tuff Country EZ-Ride suspension's 3.5? lift kits for the 2500HD/3500HD are an affordable lift solution that will allow up to 35 inch tires (w/minor trimming). The replacement torsion bars reindex the factory torsion bars while the new upper control arms keep the front end in proper geometry. 1? inch blocks and extended u-bolts raise the rear end. Also includes front shock relocation brackets, new shocks not required.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2013-2019 Chevrolet Silverado 3500 HD LT 2013-2019 Chevrolet Silverado 3500 HD LTZ 2013-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2013-2019 GMC Sierra 3500 HD Denali 2013-2019 GMC Sierra 3500 HD SLE 2013-2019 GMC Sierra 3500 HD SLT 2013-2014 GMC Sierra 3500 HD WT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2018 Chevrolet Silverado 3500 HD High Country 2018 Chevrolet Silverado 3500 HD LT 2018 Chevrolet Silverado 3500 HD LTZ 2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2018-2019 GMC Sierra 3500 HD Base 2018 GMC Sierra 3500 HD Denali 2018 GMC Sierra 3500 HD SLE 2018 GMC Sierra 3500 HD SLT

Skyjacker Suspensions suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They help you get the right height, clearance, and attitude on your truck and maintain that factory ride quality, while improving handling. They come with all of the necessary mounting hardware and detailed instructions, and are available for 2WD or 4WD vehicles.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2015-2017 Chevrolet Silverado 3500 HD High Country 2011-2017 Chevrolet Silverado 3500 HD LT 2011-2017 Chevrolet Silverado 3500 HD LTZ 2011-2017 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2011-2018 GMC Sierra 2500 HD Denali 2011-2018 GMC Sierra 2500 HD SLE 2011-2018 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2017 GMC Sierra 3500 HD Base 2011-2017 GMC Sierra 3500 HD Denali 2011-2017 GMC Sierra 3500 HD SLE 2011-2017 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2015 Chevrolet Silverado 2500 HD High Country 2011-2015 Chevrolet Silverado 2500 HD LT 2011-2015 Chevrolet Silverado 2500 HD LTZ 2011-2015 Chevrolet Silverado 2500 HD WT 2015 Chevrolet Silverado 3500 HD High Country 2011-2015 Chevrolet Silverado 3500 HD LT 2011-2015 Chevrolet Silverado 3500 HD LTZ 2011-2015 Chevrolet Silverado 3500 HD WT 2015 GMC Sierra 2500 HD Base 2011-2015 GMC Sierra 2500 HD Denali 2011-2015 GMC Sierra 2500 HD SLE 2011-2015 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015 GMC Sierra 3500 HD Base 2011-2015 GMC Sierra 3500 HD Denali 2011-2015 GMC Sierra 3500 HD SLE 2011-2015 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Skyjacker Suspensions suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They help you get the right height, clearance, and attitude on your truck and maintain that factory ride quality, while improving handling. They come with all of the necessary mounting hardware and detailed instructions, and are available for 2WD or 4WD vehicles.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2015-2017 Chevrolet Silverado 3500 HD High Country 2011-2017 Chevrolet Silverado 3500 HD LT 2011-2017 Chevrolet Silverado 3500 HD LTZ 2011-2017 Chevrolet Silverado 3500 HD WT 2015-2018 GMC Sierra 2500 HD Base 2011-2018 GMC Sierra 2500 HD Denali 2011-2018 GMC Sierra 2500 HD SLE 2011-2018 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2017 GMC Sierra 3500 HD Base 2011-2017 GMC Sierra 3500 HD Denali 2011-2017 GMC Sierra 3500 HD SLE 2011-2017 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Zone Offroad 11-19 GM HD 5in System w/ Top Overload - Nitro

Zone Offroad 11-19 GM HD 5in System w/o Top Overload

Tuff Country EZ-Ride suspension's 3.5 in. lift kits for the 2500HD/3500HD are an affordable lift solution that will allow up to 35 inch tires (w/minor trimming). The replacement torsion bars reindex the factory torsion bars while the new upper control arms keep the front end in proper geometry. 1 in. inch blocks and extended u-bolts raise the rear end. Also includes front shock relocation brackets, new shocks not required.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2013-2019 Chevrolet Silverado 3500 HD LT 2013-2019 Chevrolet Silverado 3500 HD LTZ 2013-2019 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2019 GMC Sierra 3500 HD Base 2013-2019 GMC Sierra 3500 HD Denali 2013-2019 GMC Sierra 3500 HD SLE 2013-2019 GMC Sierra 3500 HD SLT 2013-2014 GMC Sierra 3500 HD WT