Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Includes front and rear 2.25 Dirt Logic Stainless Steel shocks.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket.This Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

Zone Offroad 2001-2010 Chevy/GMC HD 6in Suspension System

Skyjacker Suspensions suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They help you get the right height, clearance, and attitude on your truck and maintain that factory ride quality, while improving handling. They come with all of the necessary mounting hardware and detailed instructions, and are available for 2WD or 4WD vehicles.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1977-1981 Chevrolet K30 Cheyenne 1981-1986 Chevrolet K30 Custom 1977-1980 Chevrolet K30 Custom Deluxe 1981 Chevrolet K30 Deluxe 1977-1986 Chevrolet K30 Scottsdale 1977-1986 Chevrolet K30 Silverado 1987 Chevrolet V30 Custom Deluxe 1987 Chevrolet V30 Scottsdale 1987 Chevrolet V30 Silverado 1977-1978 GMC K35 Base 1977-1978 GMC K35 High Sierra 1977-1978 GMC K35 Sierra Classic 1977-1978 GMC K35 Sierra Grande 1979-1986 GMC K3500 Base 1979-1986 GMC K3500 High Sierra 1979-1986 GMC K3500 Sierra Classic 1979-1982 GMC K3500 Sierra Grande 1987 GMC V3500 Base 1987 GMC V3500 High Sierra 1987 GMC V3500 Sierra Classic