Idle Air Control Valve #36015 GM Stepper Type

The Edelbrock #36013 is a Replacement Bosch 4-wire switching, Narrow-Band Oxygen Sensor for ProFlo2, ProFlo2/XT, and Pro-Tuner EFI Systems.Warranty

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems. This Delphi Temperature Sensor designed for measurement of coolant, oil and other automotive fluids. It has 3/8-18 NPT threads with thread sealant pre-applied and can be used on a variety of applications.

The Edelbrock #3591 is a Replacement Narrow-Band Oxygen Sensor For ProFlo1 (#3500 Series) EFI Systems. It is a Bosch 3-Wire, Heated Sensor. It includes Replacement O2 Sensor and Weld-In Bung.Warranty

Edelbrock part #3589 Pro-Flo EFI replacement coolant temperature sensor is available for Pro-Flo and Pro-Flo XT EFI systems, Brass, Natural, 3/8 in. NPT Thread Size.

The Edelbrock #3588 Air Temp Sensor with 3/8"-18 NPT threads. This Edelbrock #36018 Threaded Air Temp Sensor has a range from -40 to 284 Deg Fahrenheit.Warranty

Edelbrock Manifold Absolute Pressure Sensor is for use with first generation Edelbrock Pro-Flo EFI systems.Warranty

Edelbrock part #3586 Pro-Flo EFI Fuel Pump Relay. Edelbrock Pro-Flo fuel pump relays can help restore proper function to your Pro-Flo EFI system so that it can perform its optimum bestWarranty

The Edelbrock #3578 Air Temp Sensor is for push in connections. This Edelbrock #36018 Air Temp Sensor includes a rubber grommet and has a range from -40 to 284 Deg Fahrenheit.Warranty

Edelbrock part #3546 for Pro-Flo 3 Fuel Sensor, It includes a 1/8-27 NPT fuel pressure sensor with a -6 AN fuel pressure take-off fittingInstallation Instructions

The Edelbrock 3519 is a new calibration module that will be a replacement or service part for any Pro-Flo kit.Warranty

Edelbrock Wire Separator Kit #22799 will organize spark plug wires on 4-, 6- and 8-cylinder engines and includes six separators (two 2-wire, two 3-wire and two 4-wire) designed to work with wire diameters up to 8.5mm. Edelbrock Separators are constructed of glass-fiber-reinforced nylon for durability that resists temperature up to 464 degrees. Each Separator features a click-lock folding design that securely hold wires in place to prevent cross-firing between cylinders. Separators have a textured black finish to blend in with any engine compartment and the Edelbrock logo lets everyone know that you've chosen the best.

Edelbrock part #22744 Max-Fire Coil-On-Plug ignition coil pack is for use with 1997-2014 Ford 4.6L, 5.4L and 6.8L engines with 2-valve cylinder heads. It's a direct bolt-on with OEM DIS electronic controls and aftermarket high performance ignition systems. Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. The coils are sealed with a high temperature epoxy for shock and vibration resistance?as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack best suited for your vehicle. Fits 2-valve engines only. Sold Individually.This Part Fits: Year Make Model Submodel 1997-2008,2010-2011 Ford Crown Victoria Base 2006-2009 Ford Crown Victoria Fleet 2002-2009 Ford Crown Victoria LWB 1997-2011 Ford Crown Victoria LX 2004-2006 Ford Crown Victoria LX Sport 1997-2011 Ford Crown Victoria Police Interceptor 1997-2005 Ford Crown Victoria S 2005 Ford Crown Victoria Special Edition 2003-2014 Ford E-150 Base 2006-2007 Ford E-150 Chateau 2006-2014 Ford E-150 XL 2006-2014 Ford E-150 XLT 2003-2005 Ford E-150 Club Wagon Chateau 2003-2005 Ford E-150 Club Wagon XL 2003-2005 Ford E-150 Club Wagon XLT 1997-2002 Ford E-150 Econoline Base 1997-2000 Ford E-150 Econoline XL 1997-2002 Ford E-150 Econoline Club Wagon Chateau 1997-2000 Ford E-150 Econoline Club Wagon Custom 2001-2002 Ford E-150 Econoline Club Wagon XL 1997-2002 Ford E-150 Econoline Club Wagon XLT 2003-2014 Ford E-250 Base 1997-2002 Ford E-250 Econoline Base 1997-2000 Ford E-250 Econoline XL 2003-2005 Ford E-350 Club Wagon Chateau 2003-2005 Ford E-350 Club Wagon XL 2003-2005 Ford E-350 Club Wagon XLT 1997-1998 Ford E-350 Econoline Base 1997-1998 Ford E-350 Econoline XL 1997-2002 Ford E-350 Econoline Club Wagon Chateau 1997-2000 Ford E-350 Econoline Club Wagon Custom 2001-2002 Ford E-350 Econoline Club Wagon XL 1997-1998 Ford E-350 Econoline Club Wagon XL HD 1997-2002 Ford E-350 Econoline Club Wagon XLT 1997-1998 Ford E-350 Econoline Club Wagon XLT HD 1999-2019 Ford E-350 Super Duty Base 2006 Ford E-350 Super Duty Chateau 1999-2000,2006-2014 Ford E-350 Super Duty XL 2006-2014 Ford E-350 Super Duty XLT 2003-2005 Ford Excursion Eddie Bauer 2000-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2000-2005 Ford Excursion XLT 1997-2004 Ford Expedition Eddie Bauer 2004 Ford Expedition NBX 2004 Ford Expedition XLS 1997-2004 Ford Expedition XLT 2004 Ford Expedition XLT Sport 2002-2005 Ford Explorer Eddie Bauer 2002-2005 Ford Explorer Limited 2004 Ford Explorer NBX 2002-2005 Ford Explorer XLT 2004-2005 Ford Explorer XLT Sport 1997-2000 Ford F-150 Base 2008 Ford F-150 FX2 2000-2003 Ford F-150 Harley-Davidson Edition 2001-2003 Ford F-150 King Ranch 1997-2003 Ford F-150 Lariat 1999-2003 Ford F-150 Lightning 2004-2010 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 1997-2010 Ford F-150 XL 1997-2010 Ford F-150 XLT 2004 Ford F-150 Heritage SVT Lightning 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT 1997-1999 Ford F-250 Base 1997-1999 Ford F-250 Lariat 1997-1999 Ford F-250 XL 1997-1999 Ford F-250 XLT 2004 Ford F-250 Super Duty Harley-Davidson Edition 2004 Ford F-250 Super Duty King Ranch 1999-2004 Ford F-250 Super Duty Lariat 1999-2004 Ford F-250 Super Duty XL 1999-2004 Ford F-250 Super Duty XLT 2004 Ford F-350 Super Duty Harley-Davidson Edition 2003-2004 Ford F-350 Super Duty King Ranch 1999-2004 Ford F-350 Super Duty Lariat 1999-2004 Ford F-350 Super Duty XL 1999-2004 Ford F-350 Super Duty XLT 1997-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 1997 Ford Thunderbird LX 1998-1999 Lincoln Navigator Base 1998-1999 Lincoln Town Car Base 1998-2003 Lincoln Town Car Cartier 2001-2003 Lincoln Town Car Cartier L 2006-2007 Lincoln Town Car Designer Series 1998-2010 Lincoln Town Car Executive 2001-2011 Lincoln Town Car Executive L 2003 Lincoln Town Car Executive Protection Series 2004-2006 Lincoln Town Car Protection Series 1998-2007 Lincoln Town Car Signature 2005-2011 Lincoln Town Car Signature L 2005-2011 Lincoln Town Car Signature Limited 2004 Lincoln Town Car Ultimate 2004 Lincoln Town Car Ultimate L 1998-2008 Mercury Grand Marquis GS 2005 Mercury Grand Marquis GSL 2005 Mercury Grand Marquis Limited Edition 1998-2011 Mercury Grand Marquis LS 2003 Mercury Grand Marquis LSE 2005 Mercury Grand Marquis Ultimate Edition 2002-2004 Mercury Mountaineer Base 2005 Mercury Mountaineer Convenience 2005 Mercury Mountaineer Luxury 2004-2005 Mercury Mountaineer Premier

Edelbrock Hardware Kit part #15905 includes all parts necessary to install a #1590 or #1591 Edelbrock Supercharger System on a 2010-2013 Corvette equipped with the Grand Sport trim package and a manual transmission. These vehicles have the dry sump oiling system found on the LS7 equipped Z06 Corvette.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 2010-2013 Chevrolet Corvette ZR1

The Edelbrock part #15902 kit contains all the parts necessary to upgrade an Edelbrock supercharger Kit part #1590 to the #1591 599 horsepower level. Parts supplied include the Z06 fuel pump and a 3.5" supercharger drive pulley.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2008-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport

The Edelbrock Stage II Upgrade Kit part #15882 allows customers using the 1588/15880 supercharger (2011-14 5.0L Mustang) to upgrade to stage 2. The Edelbrock Stage II Upgrade Kit part #15882 includes a 3.25in. supercharger pulley, complete competition air intake system, Gatorback belt, and an updated calibration file. This upgrade is intended for racing applications only and is not legal for use on pollution-controlled vehicles. A properly completed race-only form will need to be signed and submitted by the customer and accepted by Edelbrock to receive the race-only calibration file. A race-only calibration file will need to be modified by the customer for the specific race engine configuration.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2012-2013 Ford Mustang Boss 302 2011-2014 Ford Mustang GT

This 8-Rib Belt Drive Conversion Kit is for use with Edelbrock equipped 2013-2020 5.0L Mustangs. It enables the use of a wider, 8-Rib supercharger pulley instead of the standard 6-Rib design. The 8-Rib belt drive will allow customers to substantially increase boost levels by installing smaller 8-Rib supercharger pulleys. The larger belt contact area on the wider pulley will help eliminate belt slip prone to small-pulley, 6-Rib configurations. For use with 2.625in. to 3.75in. pulleys.This Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2020 Ford F-150 King Ranch 2011-2020 Ford F-150 Lariat 2013-2014,2016-2020 Ford F-150 Limited 2011-2020 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2017-2020 Ford F-150 Raptor 2016-2020 Ford F-150 SSV 2011-2014 Ford F-150 STX 2013-2014 Ford F-150 SVT Raptor 2011-2020 Ford F-150 XL 2011-2020 Ford F-150 XLT 2013-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2019-2020 Ford Mustang Bullitt 2015-2020 Ford Mustang EcoBoost 2015-2020 Ford Mustang EcoBoost Premium 2011-2020 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2020 Ford Mustang GT Premium 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2013-2014,2020 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Edelbrock 3.25in. part #15873 pulley allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley is a 8-rib design for use with any of our Professional Tuner systems. Edelbrock pulley feature a black anodized finish.- 3.25in. 8-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner System

Edelbrock 3.00in. part #15872 pulley allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley is a 8-rib design for use with any of our Professional Tuner systems. Edelbrock pulley feature a black anodized finish.- 3.00in. 8-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner System

Edelbrock 2.75in. part #15871 pulley allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley is a 8-rib design for use with any of our Professional Tuner systems. Edelbrock pulley feature a black anodized finish.- 2.75in. 8-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner System

Edelbrock 2.750in. pulley part #15854 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15854 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger systems. Edelbrock pulley part #15854 offers a Black Anodized finish. - 2.75in. 10-Rib Edelbrock's/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

Edelbrock 3.250in. pulley part #15852 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15852 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger systems. Edelbrock pulley part #15852 offers a Black finish. - 3.00in. 10-Rib Edelbrock's/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

Edelbrock Comkpetition 3.250in. pulley part #15850 allows you to fine tune the air flow and performance of your E-Force C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15850 features a 10-rib design for use with our E-Force street rod and muscle car Supercharger systems. Edelbrock Competition pulley part #15850 offers a Black Anodized finish.- 3.25in. 10-Rib E-Force S/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

Edelbrock 3.500in. pulley part #15849 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15849 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger systems. Edelbrock pulley part #15849 offers a Black Anodized finish. - 3.50in. 10-Rib Edelbrock's/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

Edelbrock 3.750in. pulley part #15848 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15848 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger systems. Edelbrock pulley part #15848 offers a Black Anodized finish. - 3.75in. 10-Rib Edelbrock's/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

Edelbrock 3.875in. pulley part #15847 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15847 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger systems. Edelbrock pulley part #15847 offers a Black Anodized finish. - 3.875in. 10-Rib Edelbrock's/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

Edelbrock 4.000in. pulley part #15846 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15846 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger systems. Edelbrock pulley part #15846 offers a Black Anodized finish. - 4in. 10-Rib Edelbrock's/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

Edelbrock 4.125in. pulley part #15845 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15845 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger systems. Edelbrock pulley part #15845 offers a Black Anodize finish. - 4.125in. 10-Rib Edelbrock's/C Pulley in Black Finish for Enforcer SystemsInstallation Instructions

The Edelbrock Competition Supercharger 8 rib, 3.75" Pulley part #15831 is the perfect upgrade for your Edelbrock supercharger kit when more boost is wanted. Compatible with 2016+ Camaro Supercharger kits (use 8 Rib Pulleys standard) and 2011+ Mustang Supercharger kits equipped with optional 8-Rib conversion kit #15879.

The Edelbrock pulley part #15826 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley part #15826 is for use with any of our Professional Tuner systems. This pulley features a black anodized finish.- 4.125in. 6-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner SystemInstallation Instructions

The Edelbrock pulley part #15825 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley part #15825 is for use with any of our Professional Tuner systems. This pulley features a black anodized finish.- 3.75in. 6-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner SystemInstallation InstructionsInstallation Instructions

The Edelbrock pulley part #15824 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley part #15824 is for use with any of our Professional Tuner systems. This pulley features a black anodized finish.- 3.875in. 6-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner SystemInstallation InstructionsInstallation Instructions

The Edelbrock pulley part #15820 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley part #15820 is for use with any of our Professional Tuner systems. This pulley features a black anodized finish.- 3.50in. 6-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner SystemInstallation InstructionsInstallation Instructions

Crankshaft drive pulley adapter for use with the Edelbrock Enforcer superchargers on a Small-Block Chevy LS based engine. Edelbrock Pulley part #15818 has a GM Truck/GEN V Camaro belt offset.

Crankshaft drive pulley adapter for use with the Edelbrock Enforcer superchargers on a Small-Block Chevy LS based engine. Edelbrock Pulley part #15817 has a GM Corvette belt offset. This pulley is included with the Edelbrock Enforcer supercharger kits for LS engines.

Edelbrock part #15815 is a 15% overdrive crank pulley is for use with a 2014-19 Corvette Stingray with an Edelbrock Supercharger System installed. It features an 8.7in. diameter 10-rib secondary and stock diameter primary drive that delivers maximum traction and stability in supercharged applications. It's an ideal solution when a smaller pulley is not an option.This Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06