The Mishimoto 2011?2014 F?150 EcoBoost Hot?Side Intercooler Pipe Kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum or wrinkle black piping accompanied by silicone couplers with DuraCore? technology. Engineered to eliminate restrictive bends, this hot?side pipe kit increases average airflow by 10-percent and internal volume by 41-percent when compared to stock. The DuraCore? couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, Mishimoto's Constant Tension T?bolt clamps are included for an accurate and secure installation. Pairing this kit with our Mishimoto 2011?2014 F?150 EcoBoost Cold?Side Intercooler Pipe kit gives your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 ft/lbs more torque. To further improve your charge?air system, combine this pipe kit with the Mishimoto 2011?2014 F?150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2016 Ford F-150 King Ranch 2011-2016 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014,2016 Ford F-150 Limited 2011-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2016 Ford F-150 XL 2011-2016 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

The Mishimoto 2011?2014 F?150 EcoBoost Cold?Side Intercooler Pipe Kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum or wrinkle black piping accompanied by silicone couplers with DuraCore? technology. Engineered to eliminate restrictive bends, this cold?side pipe kit increases internal volume by 34-percent when compared to stock. The DuraCore? couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, Mishimoto's constant tension T?bolt clamps are included for an accurate and secure installation.Pairing this kit with our Mishimoto 2011?2014 F?150 EcoBoost hot?side intercooler pipe kit gives your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 ft/lbs more torque. To further improve your charge?air system, combine this pipe kit with the Mishimoto 2011?2014 F?150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2016 Ford F-150 King Ranch 2011-2016 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014,2016 Ford F-150 Limited 2011-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2016 Ford F-150 XL 2011-2016 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

The Mishimoto 2011?2014 F?150 EcoBoost Cold?Side Intercooler Pipe Kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum or wrinkle black piping accompanied by silicone couplers with DuraCore? technology. Engineered to eliminate restrictive bends, this cold?side pipe kit increases internal volume by 34-percent when compared to stock. The DuraCore? couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, Mishimoto's constant tension T?bolt clamps are included for an accurate and secure installation.Pairing this kit with our Mishimoto 2011?2014 F?150 EcoBoost hot?side intercooler pipe kit gives your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 ft/lbs more torque. To further improve your charge?air system, combine this pipe kit with the Mishimoto 2011?2014 F?150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.This Part Fits: Year Make Model Submodel 2015-2017 Ford Expedition EL King Ranch 2015-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2015-2017 Ford Expedition EL XL 2015-2017 Ford Expedition EL XLT 2015-2017 Ford Expedition King Ranch 2015-2017 Ford Expedition Limited 2015-2017 Ford Expedition Platinum 2016-2017 Ford Expedition SSV 2015-2017 Ford Expedition XL 2015-2017 Ford Expedition XLT 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2016 Ford F-150 King Ranch 2011-2016 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014,2016 Ford F-150 Limited 2011-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 SVT Raptor 2011-2016 Ford F-150 XL 2011-2016 Ford F-150 XLT 2015 Lincoln Navigator Base 2015 Lincoln Navigator L 2016-2017 Lincoln Navigator L Reserve 2016-2017 Lincoln Navigator L Select 2016-2017 Lincoln Navigator Reserve 2016-2017 Lincoln Navigator Select

If you own an F10 or F13 M5/M6, chances are you’ve already thought about modifying it. A tune and increased boost pressure are usually one of the first mods done, but the factory plastic charge pipes may throw a wrench in your plans. The factory plastic charge pipes are a known weak link in the intake system and it’s not uncommon for them to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F1X M5/M6 Charge Pipes are a durable, full aluminum construction, expertly TIG-welded to ensure a smooth and strong airflow path for the S63’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To provide the utmost perfect fitment, along with the charge pipes, we also include a CNC-machined 6061 aluminum bracket to hold the metal coolant lines that are supported by the factory intake tubes. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto F1X M5/M6 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation.This Part Fits: Year Make Model Submodel 2013-2016,2018 BMW M5 Base 2012-2018 BMW M6 Base

Upgrade your restrictive and failure-prone factory intercooler pipe with the Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit, precision engineered for the Mitsubishi Evolution X.This kit features polished 2.5 mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure.This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power.The Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit will provide reliable charge-air connections as well as improved throttle response, perfect for your daily driver or rallycross Evo.This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2015 Mitsubishi Lancer Evolution Final Edition 2008,2010-2015 Mitsubishi Lancer Evolution GSR 2008,2010-2015 Mitsubishi Lancer Evolution MR 2010-2011 Mitsubishi Lancer Evolution MR Touring 2010 Mitsubishi Lancer Evolution SE 2009-2015 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

Upgrade your restrictive and failure-prone factory intercooler pipe with the Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit, precision engineered for the Mitsubishi Evolution X.This kit features polished 2.5 mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure.This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power.The Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit will provide reliable charge-air connections as well as improved throttle response, perfect for your daily driver or rallycross Evo.This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2015 Mitsubishi Lancer Evolution Final Edition 2008,2010-2015 Mitsubishi Lancer Evolution GSR 2008,2010-2015 Mitsubishi Lancer Evolution MR 2010-2011 Mitsubishi Lancer Evolution MR Touring 2010 Mitsubishi Lancer Evolution SE 2009-2015 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

Replace your restrictive and failure-prone factory intercooler pipe with the Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit, precision engineered for flawless fitment and optimal flow for the Mitsubishi Evolution X.The kit includes everything needed to upgrade your lower intercooler pipe, remove restrictive bends, and support substantial boost pressure and horsepower.This kit features polished 2.5 mandrel-bent aluminum piping and four-layer 100-percent silicone couplers with heat-resistant embedded fibers, which offer increased heat and pressure tolerance compared to the factory rubber connections.Whether you have a daily-driven Evo or a rally project, dependable charge-air connections are essential for reliable operation.The Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection.These clamps provide the holding power you need for increased boost pressures! This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2015 Mitsubishi Lancer Evolution Final Edition 2008,2010-2015 Mitsubishi Lancer Evolution GSR 2008,2010-2015 Mitsubishi Lancer Evolution MR 2010-2011 Mitsubishi Lancer Evolution MR Touring 2010 Mitsubishi Lancer Evolution SE 2009-2015 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

Replace your restrictive and failure-prone factory intercooler pipe with the Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit, precision engineered for flawless fitment and optimal flow. The kit includes everything needed to upgrade your intercooler piping, remove restrictive bends, and support substantial boost pressure and horsepower. This kit features polished 2.5-inch mandrel-bent aluminum piping and four-layer 100-percent silicone couplers with heat-resistant embedded fibers. These couplers offer increased heat and pressure tolerance compared to the factory rubber connections. Whether you have a daily-driven Evo or a rally project, dependable charge-air connections are essential for reliable operation. The Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection. These clamps provide the holding power you need for increased boost pressures! This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2015 Mitsubishi Lancer Evolution Final Edition 2008,2010-2015 Mitsubishi Lancer Evolution GSR 2008,2010-2015 Mitsubishi Lancer Evolution MR 2010-2011 Mitsubishi Lancer Evolution MR Touring 2010 Mitsubishi Lancer Evolution SE 2009-2015 Mitsubishi Lancer Ralliart 2010-2011 Mitsubishi Lancer Ralliart Sportback

Improve airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7/8/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. The Mishimoto Evolution 7/8/9 Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. The Mishimoto Evolution 7/8/9 intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty, ensuring superior quality and craftsmanship.This Part Fits: Year Make Model Submodel 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

Improve airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7/8/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. The Mishimoto Evolution 7/8/9 Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. The Mishimoto Evolution 7/8/9 intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty, ensuring superior quality and craftsmanship.This Part Fits: Year Make Model Submodel 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

Improve airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7/8/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. The Mishimoto Evolution 7/8/9 Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. The Mishimoto Evolution 7/8/9 intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty, ensuring superior quality and craftsmanship.This Part Fits: Year Make Model Submodel 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

Improve airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7/8/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. The Mishimoto Evolution 7/8/9 Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. The Mishimoto Evolution 7/8/9 intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty, ensuring superior quality and craftsmanship.This Part Fits: Year Make Model Submodel 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

Improve airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7/8/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. The Mishimoto Evolution 7/8/9 Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. The Mishimoto Evolution 7/8/9 intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty, ensuring superior quality and craftsmanship.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

Improve airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7/8/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. The Mishimoto Evolution 7/8/9 Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. The Mishimoto Evolution 7/8/9 intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty, ensuring superior quality and craftsmanship.This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150 XL 2015-2016 Ford F-150 XLT 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

Help the air flow through the intercooling system of your L15B7 with the Mishimoto Performance Intercooler Pipe Kit for your 2016-2021 Honda Civic 1.5T or 2017-2020 Civic Si! The stock equipment on your Honda Civic is riddled with bends, and is constructed from degradation-prone materials at a restrictive diameter. All of these are characteristics that will limit the potential of your turbo-Civic. We here at Mishimoto want to remove the restriction on the future potential of the L15B7. We started with the size of the pipes. We added 13mm overall to both sides of the piping system bumping the diameters from 42mm to 55mm, equating in a 30-percent increase in size. We also took the liberty of reducing the angles of the bends in the piping, giving the charged air a more direct flow through the intercooling system improving the flow. The size and direction of the piping wasn't the only change either. Gone is the degradation-prone plastic that makes up the cold-side piping, which has been replaced with a section of mandrel-bent aluminum pipe, giving your intercooler pipe kit an improvement in durability and style. We also took the liberty to replace the rubber in the stock kit with couplers constructed with 5 layers of durable silicone embedded with heat resistant fibers, keeping engine heat out of your intercooled charged air. The result of adding the Mishimoto Intercooler Pipe kit to you 2016-2021 Honda Civic 1.5T or 2017-2020 Civic Si is the addition of flow through your intercooling system, along with a few extra horses under the hood, with the potential for more with a tune. The 2016-2021 Honda Civic 1.5T Mishimoto Performance Intercooler Pipe Kit is available in wrinkle black and Rallye red, and includes the Mishimoto lifetime Warranty.This Part Fits: Year Make Model Submodel 2016-2021 Honda Civic EX 2016-2021 Honda Civic EX-L 2016-2018 Honda Civic EX-T 2016-2021 Honda Civic LX 2016-2018 Honda Civic LX-P 2017-2020 Honda Civic Si 2017-2021 Honda Civic Sport 2017-2021 Honda Civic Sport Touring 2016-2021 Honda Civic Touring 2017-2021 Honda Civic Type R 2021 Honda Civic Type R Limited Edition

Help the air flow through the intercooling system of your L15B7 with the Mishimoto Performance Intercooler Pipe Kit for your 2016-2021 Honda Civic 1.5T or 2017-2020 Civic Si! The stock equipment on your Honda Civic is riddled with bends, and is constructed from degradation-prone materials at a restrictive diameter. All of these are characteristics that will limit the potential of your turbo-Civic. We here at Mishimoto want to remove the restriction on the future potential of the L15B7. We started with the size of the pipes. We added 13mm overall to both sides of the piping system bumping the diameters from 42mm to 55mm, equating in a 30-percent increase in size. We also took the liberty of reducing the angles of the bends in the piping, giving the charged air a more direct flow through the intercooling system improving the flow. The size and direction of the piping wasn't the only change either. Gone is the degradation-prone plastic that makes up the cold-side piping, which has been replaced with a section of mandrel-bent aluminum pipe, giving your intercooler pipe kit an improvement in durability and style. We also took the liberty to replace the rubber in the stock kit with couplers constructed with 5 layers of durable silicone embedded with heat resistant fibers, keeping engine heat out of your intercooled charged air. The result of adding the Mishimoto Intercooler Pipe kit to you 2016-2021 Honda Civic 1.5T or 2017-2020 Civic Si is the addition of flow through your intercooling system, along with a few extra horses under the hood, with the potential for more with a tune. The 2016-2021 Honda Civic 1.5T Mishimoto Performance Intercooler Pipe Kit is available in wrinkle black and Rallye red, and includes the Mishimoto lifetime Warranty.This Part Fits: Year Make Model Submodel 2016-2021 Honda Civic EX 2016-2021 Honda Civic EX-L 2016-2018 Honda Civic EX-T 2016-2021 Honda Civic LX 2016-2018 Honda Civic LX-P 2017-2020 Honda Civic Si 2017-2021 Honda Civic Sport 2017-2021 Honda Civic Sport Touring 2016-2021 Honda Civic Touring 2017-2021 Honda Civic Type R 2021 Honda Civic Type R Limited Edition

Expose your 2.0T LTG engine to improved airflow with the Mishimoto Performance Intercooler Pipe Kit for the 2016+ Chevrolet Camaro. The stock intercooler pipes are plagued by bends and a restrictive diameter. Both slow the airflow to your intercooler. The stock piping is also constructed of plastic and rubber, which will deteriorate over time on top of restricting air to your engine. This Mishimoto intercooler pipe kit is constructed of mandrel-bent aluminum and features a larger diameter to minimize any airflow restrictions. These pipes can handle the power you throw at them when turning up the boost on your LTG. Plastic is a material that Mishimoto always strives to replace with our products, and the stock cold-side intercooler pipe needed some work. Half of the stock cold-side pipe is constructed of plastic, which is prone to cracks and leaks. The Mishimoto cold-side pipe is a single section of mandrel-bent, aluminum piping featuring a CNC-machined sensor flange for use of the stock pressure sensor, a port for methanol injection, or a port for a boost gauge sensor. The hot-side pipe includes more precise machining with a perfect match of the turbo manifold flange designed for a painless installation. The hot-side pipe also has a bigger diameter for better airflow and an increase in overall volume. Mishimoto's 2016+ Camaro 2.0T performance intercooler pipe kit includes durable silicone couplers and stainless steel T-bolt clamps to ensure leak free connections between the hot-side sections and to the intercooler. Installation can be completed without modification to the engine bay as it is compatible with the stock intercooler. The Mishimoto performance intercooler pipe kit is available in either wrinkle black or a polished finish, and like all our Camaro 2.0T performance parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2019 Cadillac ATS Base 2013-2019 Cadillac ATS Luxury 2013-2016 Cadillac ATS Performance 2013-2016 Cadillac ATS Premium 2017-2019 Cadillac ATS Premium Luxury 2017-2019 Cadillac ATS Premium Performance 2016-2019 Cadillac ATS V 2017-2023 Chevrolet Camaro LS 2016-2023 Chevrolet Camaro LT

Expose your 2.0T LTG engine to improved airflow with the Mishimoto Cold-Side Intercooler Pipe Kit for the 2016+ Chevrolet Camaro. The stock intercooler pipe is plagued by bends and a restrictive diameter. Both slow the airflow to your intercooler. The stock piping is also constructed of plastic and rubber, which will deteriorate over time. The Mishimoto intercooler pipe, on the other hand, is constructed of mandrel-bent aluminum and has a 2.75? diameter to minimize any airflow restrictions. This pipe can handle the power you throw at it when you?re turning up the boost on your LTG. Plastic is a material Mishimoto always strives to replace with our products, and the stock cold-side intercooler pipe needed some work. Half of the stock cold-side pipe is constructed of plastic, which is prone to cracks and leaks. The Mishimoto cold-side pipe is a single section of mandrel-bent, aluminum piping featuring a CNC-machined sensor flange for use of the stock pressure sensor, a port for methanol injection, or a port for a boost gauge sensor. Mishimoto's cold-side Camaro 2.0T intercooler pipe also includes a durable 90-degee silicone coupler and stainless steel T-bolt clamps to ensure a leak free connection. Installation can be completed without modification to the engine bay as it is compatible with the stock intercooler. The Mishimoto cold-side intercooler pipe is available in either wrinkle black or a polished finish, and like all our Camaro 2.0T performance parts, includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2019 Cadillac ATS Base 2013-2019 Cadillac ATS Luxury 2013-2016 Cadillac ATS Performance 2013-2016 Cadillac ATS Premium 2017-2019 Cadillac ATS Premium Luxury 2017-2019 Cadillac ATS Premium Performance 2016-2019 Cadillac ATS V 2017-2023 Chevrolet Camaro LS 2016-2023 Chevrolet Camaro LT

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.7L EcoBoost that allows you to maximize the performance potential of your 2.7L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance stock location intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.----Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we’ve replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.----But durability isn’t the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 13 HP and 16 lb.-ft. of torque on the stock tune when added to the Mishimoto stock location intercooler.----If you’re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they’re backed by our Lifetime Warranty, so you can drive easy knowing we’ve got you covered.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2021-2023 Ford Bronco Wildtrak

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.7L EcoBoost that allows you to maximize the performance potential of your 2.7L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance high-mount intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.----Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we’ve replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.----But durability isn’t the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 11.6 HP and 13.7 lb.-ft. of torque on the stock tune when added to the Mishimoto high-mount intercooler.----If you’re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they’re backed by our Lifetime Warranty, so you can drive easy knowing we’ve got you covered.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2021-2023 Ford Bronco Wildtrak

The Bronco is back, and with two powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 325 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn’t want more from their vehicle? We here at Mishimoto are never ones to settle for stock, so that’s why we’ve developed these performance intercooler pipes for your 2021+ Ford Bronco 2.7L EcoBoost.----Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we’ve replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.----But durability isn’t the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 5 HP and 6.1 lb-ft. of torque on the stock tune.----If you’re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they’re backed by our Lifetime Warranty, so you can drive easy knowing we’ve got you covered.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2021-2023 Ford Bronco Wildtrak

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows you to maximize the performance potential of your 2.3L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance stock location intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.----Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore technology. The Mishimoto intercooler pipes flow up to 61-percent better than the stock pipes, allowing your 2.3L EcoBoost to breathe freely and make the most of its turbo. DuraCore­­ boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. The upgrade kit also includes CNC-machined aluminum intercooler outlets which provide unrestricted flow from the pipes to the intercooler, maximizing flow and performance.----As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost intercooler pipe kit is backed by our Mishimoto Lifetime Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2023 Ford Bronco Heritage Edition 2021-2023 Ford Bronco Outer Banks

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows you to maximize the performance potential of your 2.3L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance stock location intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.----Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore technology. The Mishimoto intercooler pipes flow up to 61-percent better than the stock pipes, allowing your 2.3L EcoBoost to breathe freely and make the most of its turbo. DuraCore­­ boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. The upgrade kit also includes CNC-machined aluminum intercooler outlets which provide unrestricted flow from the pipes to the intercooler, maximizing flow and performance.----As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost intercooler pipe kit is backed by our Mishimoto Lifetime Warranty.User 1This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2023 Ford Bronco Heritage Edition 2021-2023 Ford Bronco Outer Banks

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows you to maximize the performance potential of your 2.3L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance high-mount intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.---- Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore technology. The Mishimoto intercooler pipes flow up to 61-percent better than the stock pipes, allowing your 2.3L EcoBoost to breathe freely and make the most of its turbo. When combined with our high-mount intercooler, the charge air system produces power gains of 4.5 HP and 10.8 lb.-ft of torque. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. The included upgrade couplers provide unrestricted flow from the pipes to the intercooler, maximizing flow and performance.----As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost intercooler pipe kit is backed by our Mishimoto Lifetime Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2023 Ford Bronco Heritage Edition 2021-2023 Ford Bronco Outer Banks

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows you to maximize the performance potential of your 2.3L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance high-mount intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.---- Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore technology. The Mishimoto intercooler pipes flow up to 61-percent better than the stock pipes, allowing your 2.3L EcoBoost to breathe freely and make the most of its turbo. When combined with our high-mount intercooler, the charge air system produces power gains of 4.5 HP and 10.8 lb.-ft of torque. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. The included upgrade couplers provide unrestricted flow from the pipes to the intercooler, maximizing flow and performance.----As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost intercooler pipe kit is backed by our Mishimoto Lifetime Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2023 Ford Bronco Heritage Edition 2021-2023 Ford Bronco Outer Banks

 Mishimoto has developed a direct-fit Intercooler Pipe kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows owners to maximize the performance potential of their 2.3L Bronco. Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore™ technology. The larger volume of our pipes allows your 2.3L EcoBoost to breathe freely and make the most of its turbo boost. DuraCore™ boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. Combine this kit with the Mishimoto 2021+ Bronco Stock Location or High-Mount Intercooler to unleash everything the 2.3L EcoBoost engine is capable of. As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost Intercooler Pipe kit is backed by our Lifetime Warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2023 Ford Bronco Heritage Edition 2021-2023 Ford Bronco Outer Banks

 Mishimoto has developed a direct-fit Intercooler Pipe kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows owners to maximize the performance potential of their 2.3L Bronco. Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore™ technology. The larger volume of our pipes allows your 2.3L EcoBoost to breathe freely and make the most of its turbo boost. DuraCore™ boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. Combine this kit with the Mishimoto 2021+ Bronco Stock Location or High-Mount Intercooler to unleash everything the 2.3L EcoBoost engine is capable of. As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost Intercooler Pipe kit is backed by our Lifetime Warranty.User 1This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2023 Ford Bronco Heritage Edition 2021-2023 Ford Bronco Outer Banks

Help reduce the heat in your engine bay with the Mishimoto Turbo Blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer, and 96-percent silica inner layer, the Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Our turbo blankets interior are rated to 2300 F, and can wIt'stand up to 1800 F direct exterior heat. The Mishimoto Turbo Blankets are available in a selection of sizes and also include the Mishimoto Lifetime Warranty for a worry free installation.

Help reduce the heat in your engine bay with the Mishimoto Turbo Blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer, and 96-percent silica inner layer, the Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Our turbo blankets interior are rated to 2300 F, and can wIt'stand up to 1800 F direct exterior heat. The Mishimoto Turbo Blankets are available in a selection of sizes and also include the Mishimoto Lifetime Warranty for a worry free installation.

Help reduce the heat in your engine bay with the Mishimoto Turbo Blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer, and 96-percent silica inner layer, the Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Our turbo blankets interior are rated to 2300 F, and can wIt'stand up to 1800 F direct exterior heat. The Mishimoto Turbo Blankets are available in a selection of sizes and also include the Mishimoto Lifetime Warranty for a worry free installation.

Help reduce the heat in your engine bay with the Mishimoto Turbo Blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer, and 96-percent silica inner layer, the Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Our turbo blankets interior are rated to 2300 F, and can wIt'stand up to 1800 F direct exterior heat. The Mishimoto Turbo Blankets are available in a selection of sizes and also include the Mishimoto Lifetime Warranty for a worry free installation.

Designed in-house at AWE, our ColdFront™ product line is the solution for consistent and reliable performance for modified vehicles looking for maximum power and security. AWE ® ColdFront™ products include: The AWE ® ColdFront™ Reservoir - part of the ColdFront family - is CNC Machined from 6061 Billet Aluminum and plumbed directly into the heat exchanger coolant system to increase supercharger coolant capacity. The increase in coolant capacity leads to lower coolant temperatures, in turn supporting lower air intake temperatures. To further reduce coolant temperatures, the AWE ® ColdFront™ Reservoir incorporates a true flow through design which acts to reduce coolant temperature as it flows through the unit. The AWE ® ColdFront™ Reservoir features an anodized aluminum cap laser etched with the AWE logo, ensuring that checking the coolant level is a breeze. The AWE ® ColdFront™ Reservoir can be used either in combination with other members of the AWE ® ColdFront™ product line or can be used with the factory heat exchanger.This Part Fits: Year Make Model Submodel 2013-2017 Audi Q5 Premium Plus 2013-2017 Audi Q5 Prestige 2014-2017 Audi SQ5 Premium Plus 2014-2017 Audi SQ5 Prestige

Designed in-house at AWE, our ColdFront™ product line is the solution for consistent and reliable performance for modified vehicles looking for maximum power and security. AWE ® ColdFront™ products include: The AWE ® ColdFront™ Reservoir - part of the ColdFront family - is CNC Machined from 6061 Billet Aluminum and plumbed directly into the heat exchanger coolant system to increase supercharger coolant capacity. The increase in coolant capacity leads to lower coolant temperatures, in turn supporting lower air intake temperatures. To further reduce coolant temperatures, the AWE ® ColdFront™ Reservoir incorporates a true flow through design which acts to reduce coolant temperature as it flows through the unit. The AWE ® ColdFront™ Reservoir features an anodized aluminum cap laser etched with the AWE logo, ensuring that checking the coolant level is a breeze. The AWE ® ColdFront™ Reservoir can be used either in combination with other members of the AWE ® ColdFront™ product line or can be used with the factory heat exchanger.This Part Fits: Year Make Model Submodel 2010-2013 Audi S4 Base 2014-2016 Audi S4 Premium Plus 2014-2016 Audi S4 Prestige 2013,2017 Audi S5 Base 2010-2013 Audi S5 Cabriolet 2014-2016 Audi S5 Premium Plus 2014-2016 Audi S5 Prestige

The AWE ® ColdFront™ Protection Screen is the solution for guarding the ColdFront™ Heat Exchanger from road debris. The Protection Screen guards the full face of the heat exchanger with durable stainless wire mesh and is surrounded by a stainless steel frame, protecting it against any small objects that may find their way past the vehicle’s grill. This keeps the heat exchanger fins free of damage, allowing them to perform with maximum efficiency.This Part Fits: Year Make Model Submodel 2013-2017 Audi Q5 Premium Plus 2013-2017 Audi Q5 Prestige 2010-2013 Audi S4 Base 2014-2016 Audi S4 Premium Plus 2014-2016 Audi S4 Prestige 2013,2017 Audi S5 Base 2010-2013 Audi S5 Cabriolet 2014-2016 Audi S5 Premium Plus 2014-2016 Audi S5 Prestige 2014-2017 Audi SQ5 Premium Plus 2014-2017 Audi SQ5 Prestige

Cast aluminum end tanks with internal baffling and a robust bar/plate aluminum core for maximum heat transfer render a 130% increase in frontal surface area and a massive 83% increase in volume over the factory B9 SQ5 intercooler. Regardless if your vehicle is producing higher-than-stock boost levels, or you’re keeping it within factory spec, the ColdFront™ Intercooler solves any potential heat-related issues. By keeping intake air temperature low, and pressure drop at a minimum, engine output remains consistent even when outside temperatures rise. The ColdFront™ will provide the safety margin needed in order for you to push the limit with confidence. There is no cutting required when installing this intercooler. The ColdFront™ Intercooler reuses the factory intercooler hoses and clamps.This Part Fits: Year Make Model Submodel 2019-2024 Audi SQ5 Premium 2018-2024 Audi SQ5 Premium Plus 2018-2024 Audi SQ5 Prestige

Presenting the AWE ColdFront™ Intercooler for the Audi B9 A4/A5 2.0T & S4/S5 3.0T. Cast aluminum end tanks with internal baffling and a robust bar/plate aluminum core for maximum heat transfer render a 130% increase in frontal surface area and a massive 83% increase in volume over the factory B9 intercooler. Regardless if your vehicle is producing higher-than-stock boost levels, or you’re keeping it within factory spec, the ColdFront™ Intercooler solves any potential heat-related issues. By keeping intake air temperature low, and pressure drop at a minimum, engine output remains consistent even when outside temperatures rise. The ColdFront™ will provide the safety margin needed in order for you to push the limit with confidence. There is no cutting required when installing this intercooler. The ColdFront™ Intercooler reuses the factory intercooler hoses and clamps. Cool to the core.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Audi A4 Premium 2017-2020 Audi A4 Premium Plus 2017-2020 Audi A4 Prestige 2019 Audi A4 Titanium 2018-2020 Audi A4 allroad Premium 2018-2020 Audi A4 allroad Premium Plus 2018-2020 Audi A4 allroad Prestige 2017-2024 Audi A4 Quattro Premium 2017-2024 Audi A4 Quattro Premium Plus 2017-2024 Audi A4 Quattro Prestige 2019-2020 Audi A4 Quattro Ultra sport 2018-2024 Audi A5 Quattro Premium 2018-2024 Audi A5 Quattro Premium Plus 2018-2024 Audi A5 Quattro Prestige 2019-2024 Audi S4 Premium 2018-2024 Audi S4 Premium Plus 2018-2024 Audi S4 Prestige 2019-2024 Audi S5 Premium 2018-2024 Audi S5 Premium Plus 2018-2024 Audi S5 Prestige 2020-2021 Audi S5 Sportback Premium 2018-2024 Audi S5 Sportback Premium Plus 2018-2024 Audi S5 Sportback Prestige