The Edelbrock pulley part #15822 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley part #15822 is for use with any of our Professional Tuner systems. This pulley features a black anodized finish.- 3.00in. 6-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner SystemInstallation InstructionsInstallation Instructions

The Edelbrock pulley part #15821 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley part #15821 is for use with any of our Professional Tuner systems. This pulley features a black anodized finish.- 3.25in. 6-Rib Edelbrock's/C Pulley in Black Finish for - Pro Tuner SystemInstallation InstructionsInstallation Instructions

The new Edelbrock Supercharger System #15812 is now available for the 2019-2021 Ford F-150 powered by the 5.0L Ti-VCT Coyote V-8 engine. This bolt-on performance kit is 50-state emissions legal and produces an impressive 601 horsepower with 468 ft-lbs of torque at the rear wheels on pump gas. At the heart of this Edelbrock supercharger kit are the new high-efficiency Eaton R2650 Twin Vortices Series rotors featuring a four-lobe design with a 170-degree twist for maximum flow, minimum temperature rise and quiet operation. The R2650 TVS requires 18% less input power and uses larger bearings with thicker gears for increased durability and reliability. The inverted design of our system places the unit low in the F-150 engine valley, which allows runner length to be increased for more low-end torque. Contributing to the 68% power increase is a specially designed front drive with a short front-facing intake configuration that shortens the inlet path and completely eliminates the need for a power-robbing jackshaft found on other types of superchargers. And if you're concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy thanks to the supercharger's integrated bypass valve that mitigates parasitic power loss during normal driving. The Edelbrock supercharger kit for the 2019-2021 F-150 features an integrated DP-3C (Dual-Pass 3 Core) high-capacity air-to-water intercooler and includes all wiring harnesses, pre-formed hoses, hardware and color step-by-step installation manual. Whether you plan to tow a trailer, haul heavier loads, or you just want to feel your F-150 come to life without sacrificing daily drivability, the Edelbrock supercharger kit will deliver levels of performance and acceleration that you never thought possible from a stock-block engine. The Edelbrock supercharger comes finished in durable matte black powder-coat and is covered by our industry-leading 3-year/36,000-mile warranty.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2019-2020 Ford F-150 King Ranch 2019-2020 Ford F-150 Lariat 2019-2020 Ford F-150 Limited 2019-2020 Ford F-150 Platinum 2019-2020 Ford F-150 Police Responder 2019-2020 Ford F-150 Raptor 2019-2020 Ford F-150 SSV 2019-2020 Ford F-150 XL 2019-2020 Ford F-150 XLT

Edelbrock Part #15803 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2005-09 Mustang GT racing applications. Includes a 7.85in. long reusable open element filter, plastic shroud and all necessary hardware for installation. This kit is intended for use when upgrading from system #1580, which already includes a MAF sensor.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang GT

Edelbrock Supercharger System #156660 W/O TUNE is a bolt-on forced induction kit that features significant improvements for 2019-2021 Chevrolet/GMC 1500-series trucks with the 6.2L V8 engine. This kit is emissions-legal in all 50 states when used with the Edelbrock-specified calibration (not included) and standard 3.75-inch supercharger pulley. An Edelbrock Supercharger is the perfect power adder whether you plan to tow a boat, haul heavier loads, or you just want to feel your truck come to life without sacrificing daily drivability. Edelbrock Supercharger Kit #156660 for Chevy/GMC trucks features a redesigned lid with more clearance under the cowl for easier installation and a restyled badge lets people know that your system is Made in the USA by Edelbrock. Installation of this Edelbrock Supercharger system requires no cutting or modifications and fits neatly under the stock hood. If you're concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy during normal driving thanks to the system's integrated bypass valve that mitigates parasitic power loss. This is a true bolt-on kit that requires no additional modifications to the stock 6.2L engine. The Edelbrock Supercharger features a self-contained lubrication system with a 100,000-mile service interval and a patented high-capacity Dual-Pass 3-Core (DP3C) intercooler. The durable black powder-coating blends nicely with the engine and results in an attractive underhood presentation that looks like the factory put it there. Each Edelbrock Supercharger kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation.

The Edelbrock Stage 1 Street Supercharger System part #15560 (No Tuner) for 2012-19 Scion FR-S, BRZ, or Toyota GT86 increases the performance of your 2.0L engine to 242 horsepower and 186 ft-lbs of torque at the rear wheels. This Edelbrock Supercharger System is designed exclusively for the FA20/4U-GSE engine. It's unique inverted design allows for maximum flow, while retaining great daily driving characteristics. It has been designed from the ground-up and utilizes the Eaton 1320 TVS rotor assembly for maximum efficiency in a compact package. As with all Edelbrock superchargers, this system features an efficient high flow inlet configuration that results in a shorter, less restrictive intake path for improved airflow and performance. To cool the incoming air, is a large air-to-water intercooler and heat exchanger. All of these features help the Edelbrock deliver dramatically improved performance, especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. Lastly, the supercharger assembly is finished with a durable black powder coating with red accents for a unique look that will let everybody know your car is Edelbrock powered. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Installation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2018 Subaru BRZ Limited 2013-2018 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018 Subaru BRZ TS 2017-2018 Toyota 86 Base 2018 Toyota 86 GT 2017 Toyota 86 Special Edition

The Edelbrock Stage 1 Street Supercharger system #15540 (No Tuner) for 2016-18 Mazda MX-5 Miata increases the performance of your SKYACTIV -G 2.0L engine to 198 horsepower and 182 ft-lbs of torque at the rear wheels. Its unique design allows for maximum flow, while retaining great daily driving characteristics. It has been designed from the ground-up and utilizes the Eaton R900 TVS rotor assembly for maximum efficiency in a compact package. To cool the incoming air, is an air-to-water intercooler and heat exchanger. All these features help the Edelbrock deliver dramatically improved performance with a smooth linear power curve. Lastly, the supercharger assembly is finished with a durable black powder coating for a unique look that will let everybody know your car is Edelbrock powered! Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting. Increases horsepower by 41% and torque by 36% over stock. Unique compact design fits under the stock hood. Supplied with preformed hoses for ease of installation - no trimming needed. Bolt-on installation - everything fits right out of the box with no cutting or welding needed. Features Eaton Gen VI R900 TVS rotor assembly; the same high-quality rotors used by many OEM manufacturers. Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required). Integrated bypass valve for minimal decrease in fuel economy. Available with a FREE 3-year 36,000 mile powertrain warranty. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Mazda MX-5 Miata Club 2016-2018 Mazda MX-5 Miata Grand Touring 2017-2018 Mazda MX-5 Miata RF Club 2017-2018 Mazda MX-5 Miata RF Grand Touring 2016-2018 Mazda MX-5 Miata Sport

The Edelbrock Stage 1 Street Supercharger system part #1554 for 2016-18 Mazda MX-5 Miata increases the performance of your SKYACTIV -G 2.0L engine to 198 RWHP and 182 ft-lbs of torque at the rear wheels. Its unique design utilizes the Eaton R900 TVS rotor assembly for maximum efficiency in a compact package. An air-to-water intercooler and front mount heat exchanger deliver a cool, dense air charge resulting in dramatically improved performance with a smooth and linear power curve. The supercharger assembly is finished with a durable black powder coating that integrates seamlessly into the Miata engine bay. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting. Increases horsepower by 41% and torque by 36% over stock. Unique compact design fits under the stock hood. Supplied with preformed hoses for ease of installation - no trimming needed. Bolt-on installation - everything fits right out of the box with no cutting or welding needed. Features Eaton Gen VI R900 TVS rotor assembly; the same high-quality rotors used by many OEM manufacturers. Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required). Includes an EcuTek Pro ECU Programming Kit with Edelbrock tune. Integrated bypass valve for minimal decrease in fuel economy. Available with a FREE 3-year 36,000 mile powertrain warranty.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Mazda MX-5 Miata Club 2016-2018 Mazda MX-5 Miata Grand Touring 2017-2018 Mazda MX-5 Miata RF Club 2017-2018 Mazda MX-5 Miata RF Grand Touring 2016-2018 Mazda MX-5 Miata Sport

Edelbrock heat exchanger part #15405 is a single pass/single row design and delivers 31,000 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting. Heat Exchanger part #15405 is a Single Pass/Single Row Universal Heat Exchanger with the following dimensions (22in. W x 16.5in. H x 1.5in. D) and has 8 threaded bungs. Edelbrock offers a wide selection of Universal Heat Exchangers to work with the Edelbrock Universal or Enforcer Supercharger systems. Edelbrock heat exchangers offer reliability and durable construction for high Performance's street applications.

The Edelbrock Supercharger System #1528 for your 2015-18 Wrangler delivers 317 RWHP and 277 RWTQ for a manual and 303 RWHP and 262 RWTQ for an automatic. This Supercharger is exclusively for the Pentastar 3.6L V6 Engine featuring a unique design with minimal components make it possible to fit under the stock hood. The core of each system is the Eaton Gen VI 1320 TVS rotating assembly with a four-lobe design and 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path that for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. Part #1528 will require the ECM and TCM to be sent into Edelbrock for modification, no handheld programmer is included with these systems. This is an 8-10 day process/waiting period from the time they are received.Installation InstructionsMaterial Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2015-2017 Jeep Wrangler Rubicon 2015-2017 Jeep Wrangler Sahara 2015-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2015-2017 Jeep Wrangler Unlimited Rubicon 2015-2017 Jeep Wrangler Unlimited Sahara 2015-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

Edelbrock has exciting news for owners of the updated 2017-2020 Chevy Colorado and GMC Canyon pickup with the new Gen 2 LGZ 3.6L V6 engine: they've just released their supercharger kit for the popular midsize truck equipped with the second-generation HFV6 engine. If you opted for the "best in class" horsepower of the V6 but wish you had even more passing power and torque to haul, this supercharger for the 2017-2020 Chevy Colorado and GMC Canyon lets you have the best of both worlds. With 345 horsepower and 306 ft-lbs of torque at the rear wheels, this Edelbrock supercharger boosts the V6 engine's power output by 24% and is designed to fit seamlessly under the stock Colorado/Canyon hood with no permanent modifications. The heart of the system is the R1740 TVS head unit that sits on top of an air-to-water intercooled manifold for low inlet air temperatures and increased power. The supercharger is finished with a durable, black powder-coating so the system looks as good as it performs. Other Features Include: Integrated bypass valve for minimal decrease in fuel economy. Self-contained oiling system with a 100,000-mile service interval. 3-year/36,000-mile powertrain warranty coverage when applicable. Full color step-by-step instructions for an easy install.Material Safety Data SheetInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Chevrolet Colorado Base 2017-2021 Chevrolet Colorado LT 2017-2021 Chevrolet Colorado WT 2017-2021 Chevrolet Colorado Z71 2017-2021 Chevrolet Colorado ZR2 2018-2020 GMC Canyon All Terrain 2017-2020 GMC Canyon Base 2017-2021 GMC Canyon Denali 2017-2020 GMC Canyon SL 2017-2020 GMC Canyon SLE 2017-2020 GMC Canyon SLT

The Bypass Actuator Kit #15001 has been developed for owners of Edelbrock-supercharged Scion FR-S, Subaru BRZ and Toyota 86 vehicles equipped with older #1556 and #15560 supercharger systems who have experienced an actuator fail or who would like to proactively replace the component before a failure occurs. This bypass actuator valve is a bolt-on replacement that requires no other modification. Bypass Actuator Kit #15001 includes a new vacuum actuator, mounting bracket, hardware and detailed installation instructions.This Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2019 Subaru BRZ Series.Gray 2016 Subaru BRZ Series.HyperBlue 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition

Garrett G35-900 Super Core - Reverse Rotation

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

The NX Dry Direct Port System provide nitrous directly into each cylinder through a set of high flow NX Dry Nozzles. These systems are designed to be used with an engine management system that can add nitrous enrichment through the engine's fuel system. Includes jets for 50-300hp per stage as well as a tech card with lbs/hr flow data for each jet setting. Includes .093 NX Lightning Solenoid, WOT switch, stainless bottle brackets, 4an nitrous feedline, relay, relay harness and all necessary hardware to complete installation. You can get the system with either 1/16 (default) or 1/8NPT nozzles

By combining atmosphere venting with the proven performance benefits of our ground-breaking DV+, the VTA delivers an aggressive blow-off sound, improved throttle response, as well as superior boost holding and reliability. The integrated low-profile solenoid ensures a direct fit installation. With its low-profile integrated solenoid and compact design, installing the T9481 is a breeze. Just swap out your factory diverter valve with the VTA, and you’re good to go! T9481 is a direct bolt-on for most Audi, VW, Seat and Skoda vehicles that have a Pierburg-branded OEM diverter valve. For specific fitment information head to GFB.com.auInstallation InstructionsThis Part Fits: Year Make Model Submodel 2006-2013 Audi A3 Base 2015-2020 Audi A3 Premium 2015-2020 Audi A3 Premium Plus 2015-2019 Audi A3 Prestige 2010-2013 Audi A3 TDI 2015-2016 Audi A3 TDI Premium 2015-2016 Audi A3 TDI Premium Plus 2015-2016 Audi A3 TDI Prestige 2019 Audi A3 Titanium 2009-2013 Audi A3 Quattro Base 2015-2020 Audi A3 Quattro Premium 2015-2020 Audi A3 Quattro Premium Plus 2015-2019 Audi A3 Quattro Prestige 2005-2014 Audi A4 Base 2007-2009 Audi A4 Cabriolet 2015-2020 Audi A4 Premium 2015-2020 Audi A4 Premium Plus 2015,2017-2020 Audi A4 Prestige 2019 Audi A4 Titanium 2006-2012 Audi A4 Quattro Avant 2006-2014 Audi A4 Quattro Base 2007-2009 Audi A4 Quattro Cabriolet 2015-2020 Audi A4 Quattro Premium 2015-2020 Audi A4 Quattro Premium Plus 2015,2017-2020 Audi A4 Quattro Prestige 2019-2020 Audi A4 Quattro Ultra sport 2010-2014 Audi A5 Cabriolet 2010-2014 Audi A5 Quattro Base 2010-2014 Audi A5 Quattro Cabriolet 2015-2016,2018-2020 Audi A5 Quattro Premium 2015-2016,2018-2020 Audi A5 Quattro Premium Plus 2015,2018-2020 Audi A5 Quattro Prestige 2017 Audi A5 Quattro Sport 2018-2020 Audi A5 Sportback Premium 2018-2020 Audi A5 Sportback Premium Plus 2018-2020 Audi A5 Sportback Prestige 2012-2018 Audi A6 Premium 2012-2018 Audi A6 Premium Plus 2018 Audi A6 Sport 2011-2012,2018-2020 Audi Q5 Premium 2011-2012,2018-2020 Audi Q5 Premium Plus 2018-2020 Audi Q5 Prestige 2020 Audi Q5 Titanium Premium 2020 Audi Q5 Titanium Premium Plus 2020 Audi Q5 Titanium Prestige 2017-2020 Audi RS3 Base 2020 Audi S3 Premium 2015-2020 Audi S3 Premium Plus 2015-2019 Audi S3 Prestige 2008-2009 Audi TT Base 2012-2013,2018 Audi TT RS Quattro Base 2009-2018 Audi TTS Quattro Base 2017-2020 Porsche Macan Base 2019-2020 Volkswagen Arteon SE 2019 Volkswagen Arteon SE R-Line 2019-2020 Volkswagen Arteon SEL 2019 Volkswagen Arteon SEL Premium 2019-2020 Volkswagen Arteon SEL Premium R-Line 2019-2020 Volkswagen Arteon SEL R-Line 2007 Volkswagen Eos 2.0T 2007 Volkswagen Eos Base 2012-2015 Volkswagen Eos Executive 2015 Volkswagen Eos Final Edition 2008-2015 Volkswagen Eos Komfort 2008-2013 Volkswagen Eos Lux 2013-2014 Volkswagen Eos Sport 2008 Volkswagen Eos Turbo 2017-2019 Volkswagen Golf Alltrack S 2017-2019 Volkswagen Golf Alltrack SE 2017-2019 Volkswagen Golf Alltrack SEL 2012-2013,2015-2019 Volkswagen Golf R Base 2015-2020 Volkswagen GTI Autobahn 2006-2013 Volkswagen GTI Base 2014 Volkswagen GTI Driver's Edition 2007 Volkswagen GTI Fahrenheit 2019 Volkswagen GTI Rabbit Edition 2015-2020 Volkswagen GTI S 2015-2020 Volkswagen GTI SE 2017 Volkswagen GTI Sport 2014 Volkswagen GTI Wolfsburg Edition 2006-2007 Volkswagen Jetta 2.0T 2006-2009,2012,2017-2018 Volkswagen Jetta GLI 2019 Volkswagen Jetta GLI 35th Anniversary Edition 2019-2020 Volkswagen Jetta GLI Autobahn 2019-2020 Volkswagen Jetta GLI S 2016 Volkswagen Jetta GLI SE 2016 Volkswagen Jetta GLI SEL 2009 Volkswagen Jetta SEL 2008-2010 Volkswagen Jetta Wolfsburg Edition 2006-2007 Volkswagen Passat 2.0T 2008-2010 Volkswagen Passat Komfort 2015 Volkswagen Passat Limited Edition 2008 Volkswagen Passat Lux 2016-2018,2020 Volkswagen Passat R-Line 2014-2018,2020 Volkswagen Passat S 2014-2018,2020 Volkswagen Passat SE 2019 Volkswagen Passat SE R-Line 2016,2020 Volkswagen Passat SEL 2014-2018 Volkswagen Passat SEL Premium 2015 Volkswagen Passat Sport 2008 Volkswagen Passat Turbo 2006-2007 Volkswagen Passat Value Edition 2007,2014-2015,2019 Volkswagen Passat Wolfsburg Edition 2014-2016 Volkswagen Tiguan R-Line 2010-2020 Volkswagen Tiguan S 2010-2016,2018-2020 Volkswagen Tiguan SE 2020 Volkswagen Tiguan SE R-Line Black 2010-2020 Volkswagen Tiguan SEL 2018-2019 Volkswagen Tiguan SEL Premium 2019-2020 Volkswagen Tiguan SEL Premium R-Line 2019 Volkswagen Tiguan SEL R-Line 2019 Volkswagen Tiguan SEL R-Line Jet Black 2017 Volkswagen Tiguan Sport 2010,2017 Volkswagen Tiguan Wolfsburg Edition

Turbosmart Raceport Gen-V Universal - Black (No Weld Flange) Female (Green Spring)

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapter with an o-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2016-2018 Ram 1500 Laramie 2016-2018 Ram 1500 Laramie Longhorn 2016-2018 Ram 1500 Limited 2016-2018 Ram 1500 Lone Star 2016 Ram 1500 Outdoorsman 2016-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2016-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

This BladeRunner GT Series Radiator keeps your 2007-11 Jeep Wrangler JK with the 3.8L running cooler, longer. 100% aircraft-grade 5052 aluminum, 1-3/4" bar and plate core design and 1/8" aluminum fabricated end tanks handle rock-crawling and street hauling. Includes upper and lower 5-ply polyester reinforced silicone hoses and quality stainless steel, T-Bolt clamps for a simple, secure installation. Unique 1-3/4" Bar and Plate Core Design: 25% more efficient than factory tube and fin core design. The BladeRunner features a bar and plate core design which provides greater heat dissipation and better coolant flow for optimum cooling efficiency. Flow and Performance: Aircraft-grade aluminum construction and larger core offers 25% more coolant capacity to maintain cooler temperatures. Includes both upper and lower 5-ply polyester reinforced silicone hoses that withstand high-temperatures and outlast factory rubber hoses. End Tanks: The unique BladeRunner end tanks are constructed out of 1/8'' TIG-welded aluminum plates for strength and durability. Billet Aluminum Inlet/Outlet: 1 1/2" diameter billet aluminum inlet and outlet for long-lasting reliability. TIG-Welded: 100% TIG-welded by certified craftsmen for race proven strength and durability. TIG-welding provides the strongest welds reducing stress cracks. Brass Drainage Valve: This radiator includes a 1/4" NPT brass drain valve with a barbed fitting to connect a hose for draining coolant easy and mess free. Perfect Fit: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality, stainless steel, T-Bolt clamps and heavy-duty 5-ply silicone hoses for strength. Custom Appearance: Brushed aluminum finish with an aFe Power logo painted on the front. Radiator hoses are finished in black silicone with an aFe Power logo printed on them.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2007-2011 Jeep Wrangler Rubicon 2007-2011 Jeep Wrangler Sahara 2010-2011 Jeep Wrangler Sport 2011 Jeep Wrangler Unlimited 70th Anniversary 2007-2011 Jeep Wrangler Unlimited Rubicon 2007-2011 Jeep Wrangler Unlimited Sahara 2010-2011 Jeep Wrangler Unlimited Sport 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2016-2018 Ram 1500 Laramie 2016-2018 Ram 1500 Laramie Longhorn 2016-2018 Ram 1500 Limited 2016-2018 Ram 1500 Lone Star 2016 Ram 1500 Outdoorsman 2016-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2016-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This intercooler tube kit features a factory style billet aluminum quick-connect adapter with an O-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Finished in Wrinkle Black powder coating with a unique laser-etched aFe power logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2025 BMW Z4 M40i

BorgWarner SuperCore Assembly EFR B2 8474 (Aluminum B. Hsg)

Garrett GVB-50R 50mm RCV BOV - Black

Garrett GVB-50A 50mm VTA BOV - Blue

Garrett PUMA Air / Air Intercooler CAC Core (26.80in x 10.40in x 4.0in) - 950 HP

Garrett G47 Turbine Hsg Kit 1.08 A/R T6 V-Band In/Out

CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 20" x 12" x 4" Horizontal Flow Core is rated for 850 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.

BorgWarner Actuator Bracket Kit EFR 62-76mm CW 0.83 0.94 TH

BorgWarner Turbocharger SX S400SX4 T6 A/R 1.32 80mm Inducer w/ Race Cover

Garrett GVB-50R 50mm RCV BOV - Silver

Garrett GVB-50R 50mm RCV BOV - Blue

Garrett GVB-50R 50mm RCV BOV - Red

Garrett GVB-50A 50mm VTA BOV - Silver

Garrett GVB-50A 50mm VTA BOV - Black

Garrett GVB-50A 50mm VTA BOV - Red

Garrett GVW-60 60mm Wastegate Kit - Silver