ARB Jack Mount Plug
$4.86
ARB offers a wide array of bumper accessories such as winch installation kits, driving lights, looms, license plate kits, and hardware to complement our range of different bumpers, from the sleek Deluxe and Sahara styles, to the more functional Commercial bumper.Warranty
ARB Slimline Roof Rack Light -For Use with ARB BASE Racks
$480.00
Complementing the sleek design of the ARB BASE Rack, ARB has added to its family of driving lights a dedicated roof rack mounted light bar. Using a uniquely tuned reflector design to limit reflection off bar work and the vehicle, this slimline bar pumps out a competitive 1 lux @ 2388ft with up to 196ft of spread. Manufactured from extruded aluminium with high pressure die cast aluminium caps, this heat dissipation chassis provides great longevity to the LEDs and allows for a couple of hits from low hanging branches while out on the trails. The body is fully powder coated in a stealth black finish, with a light tint added to the polycarbonate lens providing a non-obtrusive look. The unique half cup reflectors throws the light down the road where needed, providing a defined beam line that has been tuned into a spot/flood ?combo? configuration. Using the mounting system build into the ARB BASE Rack allows the light to be setup in minutes with different mounting options in front of the rack and below the rack which provides additional protection and a hidden look.WarrantyInstallation Instructions
ARB Roof Rack Base with Mount Kit - Flat Rack with Wind Deflector
$1,112.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack?s dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won?t collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift? Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.WarrantyThis Part Fits:
Year
Make
Model
Submodel
1998-2007
Toyota
Land Cruiser
Base
ARB Roof Rack 100X1250mm 43X49
$597.00
ARB roof racks are built to support the full rated roof load capacity of a vehicle with the mounting system and structural integrity of the rack being designed to withstand the most demanding of conditions. ARB racks are available in a variety of lengths and widths for vehicles with or without gutters, so you can choose the appropriate size to suit your requirements. Supplied with stainless steel hardware, and variable height fitting kits, an ARB Roof Rack is a great investment for any vehicle. Both steel and aluminum roof racks are available, and along with fitting a roof rack to your vehicle, you can also select from a number of optional extras to tailor it more specifically to your load carrying needs.WarrantyThis Part Fits:
Year
Make
Model
Submodel
1984-1993
Jeep
Cherokee
Base
1991-1992
Jeep
Cherokee
Briarwood
1985-1988
Jeep
Cherokee
Chief
1996,1998-2001
Jeep
Cherokee
Classic
1993-1997
Jeep
Cherokee
Country
1985-1992
Jeep
Cherokee
Laredo
1987-1992,1998-2001
Jeep
Cherokee
Limited
1985-1990
Jeep
Cherokee
Pioneer
1994-2001
Jeep
Cherokee
SE
1989-2001
Jeep
Cherokee
Sport
ARB Jl4D Roof Rack Fit Kit
$543.00
With the growing popularity of the Jeep Wrangler JL for overlanding and long distance travel, ARB has developed a Roof Rack Fitting Kit to fit in conjunction with ARB's range of roof racks. The fitting kit uses the strength of the Wrangler JL roll cage and tub to evenly distribute the load. ARB's Roof Rack mount kit achieves the load rating of 287lbs by mounting directly to the vehicle roll cage and the top of the vehicle tub section. The internal frame kit is mounted with a combination of M6, M8, and M10 fasteners and includes rubber gaskets for the mount holes required to be drilled into the factory hardtop. The Wrangler JL Roof Rack Fitting Kit is available in a ‘kit' with roof rack to specifically suit the vehicle, in both steel and alloy with mesh.WarrantyInstallation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2021
Jeep
Wrangler
Unlimited 80th Anniversary
2021
Jeep
Wrangler
Unlimited Freedom
2021-2023
Jeep
Wrangler
Unlimited High Altitude
2021-2023
Jeep
Wrangler
Unlimited High Altitude 4xe
2022
Jeep
Wrangler
Unlimited High Tide
2021
Jeep
Wrangler
Unlimited Islander
2018-2019
Jeep
Wrangler
Unlimited Moab
2018-2023
Jeep
Wrangler
Unlimited Rubicon
2021-2023
Jeep
Wrangler
Unlimited Rubicon 392
2021-2023
Jeep
Wrangler
Unlimited Rubicon 4xe
2018-2023
Jeep
Wrangler
Unlimited Sahara
2021-2023
Jeep
Wrangler
Unlimited Sahara 4xe
2021-2023
Jeep
Wrangler
Unlimited Sahara Altitude
2018-2023
Jeep
Wrangler
Unlimited Sport
2021-2023
Jeep
Wrangler
Unlimited Sport Altitude
2018-2023
Jeep
Wrangler
Unlimited Sport S
2021-2023
Jeep
Wrangler
Unlimited Willys
2023
Jeep
Wrangler
Unlimited Willys 4xe
2021-2023
Jeep
Wrangler
Unlimited Willys Sport
ARB Slimline Lens Cover-Black-One Pair-For Use with Slimline Roof Rack Light (1780500)
$14.56
Complementing the sleek design of the ARB BASE Rack, ARB has added to its family of driving lights a dedicated roof rack mounted light bar. Using a uniquely tuned reflector design to limit reflection off bar work and the vehicle, this slimline bar pumps out a competitive 1 lux @ 2388ft with up to 196ft of spread. Manufactured from extruded aluminium with high pressure die cast aluminium caps, this heat dissipation chassis provides great longevity to the LEDs and allows for a couple of hits from low hanging branches while out on the trails. The body is fully powder coated in a stealth black finish, with a light tint added to the polycarbonate lens providing a non-obtrusive look. The unique half cup reflectors throws the light down the road where needed, providing a defined beam line that has been tuned into a spot/flood "combo" configuration. Using the mounting system build into the ARB BASE Rack allows the light to be setup in minutes with different mounting options in front of the rack and below the rack which provides additional protection and a hidden look.Warranty
ARB Slimline Lens Cover - Clear - 2pc - Use w/ Slimline Roof Rack Light (1780500)
$14.56
Complementing the sleek design of the ARB BASE Rack, ARB has added to its family of driving lights a dedicated roof rack mounted light bar. Using a uniquely tuned reflector design to limit reflection off bar work and the vehicle, this slimline bar pumps out a competitive 1 lux @ 2388ft with up to 196ft of spread. Manufactured from extruded aluminium with high pressure die cast aluminium caps, this heat dissipation chassis provides great longevity to the LEDs and allows for a couple of hits from low hanging branches while out on the trails. The body is fully powder coated in a stealth black finish, with a light tint added to the polycarbonate lens providing a non-obtrusive look. The unique half cup reflectors throws the light down the road where needed, providing a defined beam line that has been tuned into a spot/flood ?combo configuration. Using the mounting system build into the ARB BASE Rack allows the light to be setup in minutes with different mounting options in front of the rack and below the rack which provides additional protection and a hidden look.WarrantyWarranty
ARB BASE Roof Rack Slimline LED Light Bar Kit
$555.00
Illuminating the darkest night doesn't have to be flashy. The BASE Rack Slimline LED Light Bar is sleek and low profile. Enjoy three mounting options above, in front of, and below the roof rack. The kit combines the Slimline Roof Rack Light Bar with wiring loom to make installation a breeze.