Introducing the first AWE Exhaust for the VW Golf R to ever feature patented drone-canceling 180 Technology®. The Touring Edition features a 3” inlet complete with an adapter to accommodate the factory downpipe perfectly while leaving an open 3” connection. In the rear resides AWE’s patented 180 Technology® resonators responsible for maintaining straight-through performance while decimating drone-prone frequencies. Thanks to the design and construction of 180 Technology® resonators, the internals will not break down and degrade over time causing tone change. Just full-bodied, drone-free rumble for life from the point of installation. This configuration provides the best ratio of interior refinement and exterior rumble on the market. No valves needed. Switch driving modes and the exhaust will render the same result as a vavled exhaust. It's the do-it-all exhaust for every day drivers. Comes complete with quad 4.5" slash-cut, double-walled tips in chrome silver.This Part Fits: Year Make Model Submodel 2023 Volkswagen Golf R 20th Anniversary Edition 2022-2024 Volkswagen Golf R Base

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 458058 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 2002-2003 Ford F-150 and 2004 Ford F-150 Heritage. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2002-2003 Ford F-150 Harley-Davidson Edition 2002-2003 Ford F-150 King Ranch 2002-2004 Ford F-150 Lariat 2002-2003 Ford F-150 Lightning 2002-2004 Ford F-150 XL 2002-2004 Ford F-150 XLT 2004 Ford F-150 Heritage SVT Lightning 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT

This 2.75" diameter system was designed specifically for the Bronco Raptor R 3.0L V6 Twin Turbo. The system features Active Exhaust Valves. Muffler contains an Internal H-Pipe. This system features the aggressive ATAK sound. BORLA's advanced muffler technology delivers great sound outside the vehicle with no drone or resonance inside the vehicle. It features 4" black coated T-304 stainless steel tips. The entire tail pipe assemblies are black coated. A system with 4" bright chrome on T-304 stainless steel tips is also avaiable. BORLA Cat-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere.ach system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit.This Part Fits: Year Make Model Submodel 2023-2024 Ford Bronco Raptor

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 447122 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2001 Ford F-150 and 2001 Ford Expedition, this direct-fit catalytic converter also interchanges with OE parts 2L3Z-5E212-CA and 1L3Z-5E212-CA. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2001 Ford Expedition Eddie Bauer 2001 Ford Expedition XLT 2001 Ford F-150 King Ranch 2001 Ford F-150 Lariat 2001 Ford F-150 XL 2001 Ford F-150 XLT

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24540. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2008 Chrysler Crossfire and 2001-2003 Mercedes-Benz SLK320, this direct-fit catalytic converter also interchanges with OE parts 170 490 01 20 80 and 170 490 03 20 64, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2004-2007 Chrysler Crossfire Base 2005-2008 Chrysler Crossfire Limited 2001-2003 Mercedes-Benz SLK320 Base

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-122. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2014-2019 Mazda CX-5 and interchanges with OE parts PY39-20-50X and PYE9-20-50X, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2017 Mazda CX-5 Grand Select 2014-2020 Mazda CX-5 Grand Touring 2019 Mazda CX-5 Grand Touring Reserve 2019 Mazda CX-5 Signature 2015-2020 Mazda CX-5 Sport 2014-2020 Mazda CX-5 Touring

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-536. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2013-2019 Land Rover Range Rover and 2014-2019 Land Rover Range Rover Sport, this direct-fit catalytic converter also interchanges with OE parts LR052356 and LR037492. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2013-2020 Land Rover Range Rover Autobiography 2014 Land Rover Range Rover Autobiography Black 2013 Land Rover Range Rover Base 2013,2020 Land Rover Range Rover HSE 2013-2019 Land Rover Range Rover Supercharged 2016-2020 Land Rover Range Rover SV Autobiography 2018-2020 Land Rover Range Rover SV Autobiography Dynamic 2014-2017 Land Rover Range Rover Sport Autobiography 2018-2020 Land Rover Range Rover Sport Autobiography Dynamic 2020 Land Rover Range Rover Sport HSE 2020 Land Rover Range Rover Sport HSE Dynamic 2014-2018 Land Rover Range Rover Sport Supercharged 2016,2018-2019 Land Rover Range Rover Sport Supercharged Dynamic 2015-2020 Land Rover Range Rover Sport SVR

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5411010. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2004-2008 Mercury Grand Marquis, 2004-2008 Ford Crown Victoria, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2004-2008 Ford Crown Victoria Base 2006-2008 Ford Crown Victoria Fleet 2004-2008 Ford Crown Victoria LWB 2004-2008 Ford Crown Victoria LX 2004-2006 Ford Crown Victoria LX Sport 2004-2008 Ford Crown Victoria Police Interceptor 2004-2005 Ford Crown Victoria S 2005 Ford Crown Victoria Special Edition 2006-2007 Lincoln Town Car Designer Series 2004-2010 Lincoln Town Car Executive 2004-2011 Lincoln Town Car Executive L 2004-2006 Lincoln Town Car Protection Series 2004-2007 Lincoln Town Car Signature 2005-2011 Lincoln Town Car Signature L 2005-2011 Lincoln Town Car Signature Limited 2004 Lincoln Town Car Ultimate 2004 Lincoln Town Car Ultimate L 2004-2008 Mercury Grand Marquis GS 2005 Mercury Grand Marquis GSL 2005 Mercury Grand Marquis Limited Edition 2004-2008 Mercury Grand Marquis LS 2005 Mercury Grand Marquis Ultimate Edition

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49186. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2007 Jeep Liberty and interchanges with OE parts 5212 9439AE and 5212 9078AB, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2006 Jeep Liberty 65th Anniversary Edition 2005-2007 Jeep Liberty Limited 2005-2006 Jeep Liberty Renegade 2005 Jeep Liberty Rocky Mountain Edition 2005-2007 Jeep Liberty Sport

The AWE Audi allroad Touring Edition Exhaust the AWE Audi allroad Touring Edition Exhaust rises to the standard of all AWE Performance technology. AWE Research and Development has yielded an exhaust that is remarkably civil while idling / part throttle cruising, but unleashed at full throttle it produces what some have called a "war-cry wail." Our exhausts are like bespoke suits: each is hand-made utilizing only the finest materials, and they command respect while never losing composure…Sophisticated, refined, and powerful, all in one package. Perfect for the allroad. Highlights The allroad’s stock exhaust system is full of crimped tubing that hurts exhaust flow and robs horsepower. The AWE Audi allroad Touring Edition Exhaust was designed using CAD modeling software to produce smooth, gradual bends, specifically engineered to eliminate any interruption to the flow of exhaust gasses. AWE’s improvements to the exhaust path result in gains of 8-9 horsepower and 6-7 lb. ft of torque at the crank. In addition to achieved power gains, replacing the large, restrictive factory mufflers also unlocks the tone of the 2.0T engine. Our exhaust systems give the 2.0T a civilized, more melodious voice, with specific attention paid to low rpm situations at part throttle.This Part Fits: Year Make Model Submodel 2013-2016 Audi allroad Premium 2013-2016 Audi allroad Premium Plus 2013-2015 Audi allroad Prestige

Stainless Works 2024 Mustang GT Catback Quad Tips Redline Sound X-Pipe Performance Connect Exhaust

Stainless Works 2024 Mustang GT Catback Dual Tips Legend Sound X-Pipe Performance Connect Exhaust

Stainless Works 2024 Mustang GT Catback Dual Tips Legend Sound H-Pipe Factory Connect Exhaust

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52410. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2011-2018 Porsche Cayenne and 2011-2017 Volkswagen Touareg, this direct-fit catalytic converter also interchanges with OE parts 7P0 254 301 CX and 958 113 021 GX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2014,2016-2018 Porsche Cayenne Base 2017-2018 Porsche Cayenne GTS 2014,2017-2018 Porsche Cayenne Platinum Edition 2017-2018 Porsche Cayenne S 2012-2017 Volkswagen Touareg V6 Executive 2012-2016 Volkswagen Touareg V6 Lux 2014-2015 Volkswagen Touareg V6 R-Line 2012-2017 Volkswagen Touareg V6 Sport 2017 Volkswagen Touareg V6 Wolfsburg 2011 Volkswagen Touareg VR6

Add power, sound and taste to your Accord with this Takeda cat-back system. 2-1/2" to 1-3/4" mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +13 HP and +16 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, oval, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.This Part Fits: Year Make Model Submodel 2013-2017 Honda Accord EX 2013-2017 Honda Accord EX-L 2013-2017 Honda Accord LX 2013-2017 Honda Accord Sport 2017 Honda Accord Sport Special Edition

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 444307. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2002-2006 Subaru Impreza and interchanges with OE parts 44612AA150 and 44612AA410, among others. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2006 Subaru Impreza 2.5i 2006 Subaru Impreza Outback Sport 2002-2003,2006 Subaru Impreza WRX 2006 Subaru Impreza WRX Limited 2006 Subaru Impreza WRX STI 2006 Subaru Impreza WRX TR

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter blue flame 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2023-2024 Toyota GR Corolla Circuit Edition 2023-2024 Toyota GR Corolla Core 2023 Toyota GR Corolla Morizo Edition 2024 Toyota GR Corolla Premium

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2023-2024 Toyota GR Corolla Circuit Edition 2023-2024 Toyota GR Corolla Core 2023 Toyota GR Corolla Morizo Edition 2024 Toyota GR Corolla Premium

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2023-2024 Toyota GR Corolla Circuit Edition 2023-2024 Toyota GR Corolla Core 2023 Toyota GR Corolla Morizo Edition 2024 Toyota GR Corolla Premium

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52411. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2011-2018 Porsche Cayenne and 2011-2017 Volkswagen Touareg, this direct-fit catalytic converter also interchanges with OE parts 7P0 254 301 BX and 958 113 022 EX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2014,2016-2018 Porsche Cayenne Base 2017-2018 Porsche Cayenne GTS 2014,2017-2018 Porsche Cayenne Platinum Edition 2017-2018 Porsche Cayenne S 2012-2017 Volkswagen Touareg V6 Executive 2012-2016 Volkswagen Touareg V6 Lux 2014-2015 Volkswagen Touareg V6 R-Line 2012-2017 Volkswagen Touareg V6 Sport 2017 Volkswagen Touareg V6 Wolfsburg 2011 Volkswagen Touareg VR6

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4561258. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2000-2003 Acura TL and 2001-2003 Acura CL, this direct-fit catalytic converter also interchanges with OE parts 18160-P8A-A00 and 18160-P8C-305, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2002-2003 Acura CL Base 2001 Acura CL Premium 2000-2003 Acura TL Base

BORLA(r) Performance Industries has designed a great total performance Cat-Back(tm) system for the 2004-2015 Nissan Titan V8 5.6L engine package (Part #140079). This system fits both the short bed crew cab and extended cab. BORLA(r) R&D Engineers have designed this dual exhaust system as a true bolt-on for either 2 or 4 wheel drive, automatic or manual transmission models. System features polished T-304 stainless steel tips. Once again, BORLA(r) technology produces a sound resembling a polite growl indicative of an old school big block while being tame enough for a cross country run. Muffler contains a H-Pipe for increased performance and improved sound. Weighs the same as the factory single system and flows 135cfm greater. This flow improvement accounts for the double digit horsepower increase and even greater potential if the engine is modified with induction upgrades because all BORLA(r) exhaust is tuned to maximize the output of any aftermarket performance upgrade. Nissan has developed a great truck as their introduction to the American full sized pick-up market, and BORLA(r) has complimented their efforts with a serious performance exhaust. BORLA(r) Performance Industries, the original pioneers of premium, high-quality austenitic T-304 stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA(r) street products carry an unsurpassed written million-mile warrantyThis Part Fits: Year Make Model Submodel 2004-2010 Nissan TITAN LE 2008-2015 Nissan TITAN PRO-4X 2011-2015 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015 Nissan TITAN SL 2011-2015 Nissan TITAN SV 2004-2010 Nissan TITAN XE

The lower priced sibling of our renowned Touring Edition Exhaust, the Track Edition for the B8 S4 3.0T is made of the same quality T304L stainless, is crafted in house, and delivers the same power gains. The difference comes in the removal of AWE’s sound-cancelling 180 Technology™ rear-mufflers, which can be found on our Touring Edition Exhaust. Warning - this thing gets rowdy! This system will produce a louder tone in the mid range. S-Tronic owners beware: This system will be especially loud at part throttle. Given the removal of the rear-mufflers, this system cannot be returned due to sound.As far as downpipes (sold separately), AWE offers Resonated and Non-Resonated Downpipes. The AWE Resonated Downpipes feature resonators larger than the stock units in order to produce a more mellow sound volume, and AWE's Non-Resonated Downpipes are suited for owners seeking the loudest AWE has to offer have to offer in the S4 line up. Both our Resonated and Non-Resonated Downpipes feature larger than stock tubing diameter. Note: In limited cases, the factory downpipes have been known to emit minor rattling noises when paired with the AWE S4 exhaust system. The possibility of rattling is eliminated with the addition of AWE downpipes.Hand-crafted, every detail of these exhausts was labored over to ensure maximum performance and longevity - what you'd expect from AWE.This Part Fits: Year Make Model Submodel 2013 Audi S4 Base 2014-2016 Audi S4 Premium Plus 2014-2016 Audi S4 Prestige

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561810. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2004-2010 Volvo S40 and 2005-2010 Volvo V50. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2006-2010 Volvo S40 2.4i 2004-2005 Volvo S40 i 2006-2010 Volvo V50 2.4i 2005 Volvo V50 i

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 444327. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2000-2005 Volkswagen Passat, 2000-2001 Audi A6 Quattro, and more, this direct-fit catalytic converter also interchanges with OE parts 4B0 254 550 LX and 4B0 253 012 PX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2000-2001 Audi A4 Base 2000-2001 Audi A6 Base 2000-2001 Audi A6 Quattro Avant 2000-2001 Audi A6 Quattro Base 2000 Volkswagen Passat 4 Motion 2003-2004 Volkswagen Passat GL 2000-2005 Volkswagen Passat GLS 2001-2002,2005 Volkswagen Passat GLS 4 Motion 2000-2005 Volkswagen Passat GLX 2001-2005 Volkswagen Passat GLX 4 Motion

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280445. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2016-2019 Ford F-750, 2016-2019 Ford F-650, and more, this direct-fit catalytic converter also interchanges with OE parts LU9Z-5E212-A and FC4Z-5E212-C, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

This 2.5" diameter BORLA Cat-Back system is the perfect addition to Civic Sport Touring vehicles. Our Cat-Back system is specifically tuned for the 1.5L turbocharged engine and is designed for easy, bolt-on installation. It features BORLA's Polyphonic Harmonizer Technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Our classic S-Type sound level delivers a sporty sound that enhances the driving experience without any drone inside the vehicle. The system features a 2.5" tail pipes that exit thru the O.E. tips/valance. Tips NOT included. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. To top it off, our systems are drone-free and made with premium, high-quality T-304 austenitic stainless steel to give you unmatched durability. Best of all, it comes with BORLA's Million-Mile warranty.This Part Fits: Year Make Model Submodel 2023 Acura Integra A-Spec 2022-2024 Honda Civic Sport Touring

This 2.75" diameter system was designed specifically for the Bronco Raptor R 3.0L V6 Twin Turbo. The 2.75" diameter BORLA High Clearance Climber system is perfect for off-roading, overlanding, and rock crawling. The system features Active Exhaust Valves. Muffler contains an Internal H-Pipe.This system features the aggressive ATAK sound. BORLA's advanced muffler technology delivers great sound outside the vehicle with no drone or resonance inside the vehicle. It features dual 2.75" brushed T-304 stainless steel tail pipes with turn down tips. BORLA Cat-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit.This Part Fits: Year Make Model Submodel 2023-2024 Ford Bronco Raptor

his 2.75" diameter system was designed specifically for the Bronco Raptor R 3.0L V6 Twin Turbo. The system features Active Exhaust Valves. Muffler contains an Internal H-Pipe. The system provides the aggressive ATAK sound. BORLA's advanced muffler technology delivers great sound outside the vehicle with no drone or resonance inside the vehicle. It features 4" bright chrome on T-304 stainless stel tips. A system with black coated 4" T-304 stainless steel tips are also avaiable. BORLA Cat-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere.ach system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit.This Part Fits: Year Make Model Submodel 2023-2024 Ford Bronco Raptor

Smooth bends, tight packaging, and two attitudes. The SwitchPath™ Exhaust is comprised of handcrafted 3-inch and 2.5-inch U.S.-sourced T304L stainless steel with a valved passenger-side tip outlet. SwitchPath™ retains the factory valve behavior and obeys the Golf R’s ECU commands based on throttle input, engine speed, and Drive Select. Sneaking out in the morning or creeping through town? Close the valve. Ready to rip? Toggle into Dynamic and your Golf R will sing a signature AWE tune with enhanced crackles that will provoke a firm grin. And we made it easy to convert between SwitchPath™ and Track Edition if you decide at a later date to change your volume with our Conversion Kit. Easy. AWE SwitchPath™ comes standard with 102mm double-walled, slash-cut tips in your choice of Chrome Silver or Diamond Black, complete with stamped AWE logo. If you're interested in push button mood control beyond what the factory wanted for you... you're in luck. The AWE SwitchPath™ Remote and accompanying control box (both sold separately) overrides the factory valving to allow the exhaust valves, whether it be on the AWE SwitchPath™ Exhaust or the stock exhaust, to be opened or closed manually via the SwitchPath™ Remote. Please note, the AWE SwitchPath™ Remote overrides the stock valve control, meaning the exhaust must be opened and closed with the remote as desired.An exhaust for the hottest of VW’s hatchbacks - with options to suit every taste, and unmatched quality, fitment, performance and tone.This Part Fits: Year Make Model Submodel 2015-2017 Volkswagen Golf R Base

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 447173 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 2000-2002 Toyota Tundra and interchanges with OE parts 17450-0F020 and 17450-0F040. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2000-2002 Toyota Tundra Limited 2000-2002 Toyota Tundra SR5

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49939. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2015 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro SS 2012-2015 Chevrolet Camaro ZL1

The MagnaFlow Chevrolet Tahoe/GMC Yukon Street Series Cat-Back Performance Exhaust System #19540 is the perfect choice if you want your 2021-2024 Chevrolet Tahoe (Z71/RST/LT/LS) or GMC Yukon to sound and perform as great as it looks while keeping interior noise to a minimum. Noise control is possible thanks to MagnaFlow’s No Drone Technology (NDT), which utilizes quarter-wave passive noise cancellation tuned to the specific droning frequency of your Chevrolet Tahoe or GMC Yukon to eliminate droning. NDT was designed to take the most popular bolt-on modifications into consideration. This cat-back exhaust kit will inject your 2021-2024 Chevrolet Tahoe (Z71/RST/LT/LS) or GMC Yukon with MagnaFlow’s deep signature exhaust tone and dyno proven performance thanks to its 3” diameter main piping, straight-through muffler, quarter-wave resonator, 4” black chromed tip and single passenger side rear exit layout. The entire exhaust kit is made of stainless steel and designed with mild interior noise levels, weight and ground clearance in mind for optimal durability and utility. CNC precision manufacturing and mandrel bent tubing guarantee a perfect fit, allowing the whole exhaust system to bolt on easily for installation.This Part Fits: Year Make Model Submodel 2021-2024 Chevrolet Tahoe LS 2021-2024 Chevrolet Tahoe LT 2021-2024 Chevrolet Tahoe PPV 2021-2024 Chevrolet Tahoe RST 2021-2024 Chevrolet Tahoe SSV 2021-2024 Chevrolet Tahoe Z71 2021-2024 GMC Yukon AT4 2021-2024 GMC Yukon SLE 2021-2024 GMC Yukon SLT

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51601 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2003-2007 INFINITI G35, 2003-2006 Nissan 350Z, and more, this direct-fit catalytic converter also interchanges with OE parts 208B3-AC325 and 208B3-AM625, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2003-2008 INFINITI FX35 Base 2003-2007 INFINITI G35 Base 2007 INFINITI G35 Journey 2007 INFINITI G35 Sport 2004-2007 INFINITI G35 X 2006-2008 INFINITI M35 Base 2006-2007 INFINITI M35 Sport 2006-2008 INFINITI M35 X 2005 Nissan 350Z 35th Anniversary Edition 2003-2006 Nissan 350Z Base 2003-2006 Nissan 350Z Enthusiast 2005-2006 Nissan 350Z Grand Touring 2003-2005 Nissan 350Z Performance 2003-2006 Nissan 350Z Touring 2003-2006 Nissan 350Z Track

The MagnaFlow 2016-2024 Chevrolet Camaro Competition Series Axle-Back Performance Exhaust System 19339 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 6.2L 2016-2024 Chevrolet Camaro with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system's axle-back layout replaces your ride's exhaust system from near the rear axle on back. Exhaust system 19339 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19339's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2024 Chevrolet Camaro SS 2017-2018 Chevrolet Camaro ZL1

The MagnaFlow 2016-2024 Chevrolet Camaro Competition Series Axle-Back Performance Exhaust System 19332 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 3.6L 2016-2024 Chevrolet Camaro with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system's axle-back layout replaces your ride's exhaust system from near the rear axle on back. Exhaust system 19332 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19332's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2018 Chevrolet Camaro LS 2016-2024 Chevrolet Camaro LT