Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-521. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2014 Ford F-150 and interchanges with OE part AL3Z-5E212-E. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2012 Ford F-150 Harley-Davidson Edition 2010-2014 Ford F-150 SVT Raptor

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-276. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2012 Subaru Legacy and interchanges with OE part 44612AA490. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2010-2012 Subaru Legacy 2.5GT

The MagnaFlow 2013-2015 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17147 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2013-2015 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17147 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17147's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17147 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.This Part Fits: Year Make Model Submodel 2013-2015 Toyota Tacoma Base 2013-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2013 Toyota Tacoma X-Runner

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17114 17114 brings additional off-roading prowess and our deep signature exhaust note to your Truck with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17114 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Truck exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17114's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17114 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.This Part Fits: Year Make Model Submodel 2001-2005 Ford Ranger Edge 2005-2009 Ford Ranger FX4 1998 Ford Ranger Splash 2006-2011 Ford Ranger Sport 2005-2007 Ford Ranger STX 2004 Ford Ranger Tremor 1998-2011 Ford Ranger XL 1998-2011 Ford Ranger XLT 2002,2005-2007 Mazda B3000 Base 2001-2007 Mazda B3000 DS 1998-2001,2003-2004 Mazda B3000 SE 1998,2000 Mazda B3000 SX 1999-2000 Mazda B3000 Troy Lee 2002-2009 Mazda B4000 Base 2001-2004 Mazda B4000 DS 1998-2001,2003-2008 Mazda B4000 SE 2000 Mazda B4000 Troy Lee

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2005-2007 Dodge Ram 2500 Laramie 2004-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2004-2007 Dodge Ram 2500 ST 2006-2007 Dodge Ram 2500 TRX4 2004-2007 Dodge Ram 3500 Laramie 2004-2007 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2004-2007 Dodge Ram 3500 ST 2007 Dodge Ram 3500 TRX4

This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a mild sound. Finishing off this exhaust system are dual 4-1/2" diameter blue flame 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system is slightly louder than the stock system, and has a mild sound compared to our muffler delete system. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2019-2020 Hyundai Elantra GT N Line 2018 Hyundai Elantra GT Sport

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2003 Dodge Ram 2500 Laramie 2003-2004 Dodge Ram 2500 SLT 2003-2004 Dodge Ram 2500 ST 2003-2004 Dodge Ram 3500 Laramie 2003-2004 Dodge Ram 3500 SLT 2003-2004 Dodge Ram 3500 ST

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a mild sound. This system produces a mild sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2019-2024 Audi Q3 Premium 2019-2024 Audi Q3 Premium Plus 2019 Audi Q3 Prestige 2020-2022 Audi Q3 S-Line Premium 2020-2022 Audi Q3 S-Line Premium Plus 2020 Audi Q3 S-Line Prestige

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93324 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1996 Ford F-150, 1996 Ford Bronco, and more, this direct-fit catalytic converter also interchanges with OE part F6TZ-5F250-ADB. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 1996 Ford Bronco Eddie Bauer 1996 Ford Bronco XL 1996 Ford Bronco XLT 1996 Ford Bronco XLT Sport 1996 Ford F-150 Eddie Bauer 1996 Ford F-150 Special 1996 Ford F-150 XL 1996 Ford F-150 XLT 1996 Ford F-250 Eddie Bauer 1996 Ford F-250 Special 1996 Ford F-250 XL 1996 Ford F-250 XLT

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2000-2004 Toyota Tundra Limited 2000-2004 Toyota Tundra SR5

Being able to have increased clearance is nice, but let's face it, we all buy exhaust systems to improve the sound our vehicle produces, and Injen Technology doesn't disappoint! The Injen Technology engineers designed a custom muffler that would provide great sound with the 2.7L and the 3.5L engine, which is no easy feat. The SES2200HT exhaust system is also made from mandrel-bent 304 stainless steel and not the lesser quality 409 like our competition uses. This provides you with an exhaust that not only looks great but will last you a lifetime.This Part Fits: Year Make Model Submodel 2016-2023 Toyota Tacoma Limited 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport

Being able to have increased clearance is nice, but let's face it, we all buy exhaust systems to improve the sound our vehicle produces, and Injen Technology doesn't disappoint! The Injen Technology engineers designed a custom muffler that would provide great sound with the 2.7L and the 3.5L engine, which is no easy feat. The SES2200 exhaust system is also made from mandrel-bent 304 stainless steel and not the lesser quality 409 like our competition uses. This provides you with an exhaust that not only looks great but will last you a lifetime.This Part Fits: Year Make Model Submodel 2016-2023 Toyota Tacoma Limited 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport

This system produced gains of up to +10 HP and +9 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2016 Hyundai Veloster Rally Edition 2013-2017 Hyundai Veloster Turbo 2014-2017 Hyundai Veloster Turbo R-Spec

This system produced gains of up to +10 HP and +9 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2016 Hyundai Veloster Rally Edition 2013-2017 Hyundai Veloster Turbo 2014-2017 Hyundai Veloster Turbo R-Spec

Akrapovic 2024+ BMW X5M/X6M (Face Lift) Sound Kit

The Jeep Wrangler exhaust that will sound good no matter where you are on the planet. The AWE Trail Edition is not only engineered to provide the best sounding exhaust note to ever be heard on the trail, it also provides maximum ground clearance while trekking rough terrain. The Trail Edition is a 3” straight-through Cat Back configuration featuring a bespoke mid pipe resonator, and ends right after the rear axle, tucked up well out of the way of danger. you're left with a rugged, USA-made exhaust that provides a bespoke, drone-free soundtrack and peace of mind unlike anything else on the market. Crawlers and overlanders: unite!This Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2012-2018 Jeep Wrangler Rubicon 2012-2017 Jeep Wrangler Sahara 2012-2018 Jeep Wrangler Sport 2016,2018 Jeep Wrangler Sport S 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2018 Jeep Wrangler Unlimited Rubicon 2012-2018 Jeep Wrangler Unlimited Sahara 2012-2018 Jeep Wrangler Unlimited Sport 2016,2018 Jeep Wrangler Unlimited Sport S

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2010-2014 Subaru Outback 2.5i 2010-2014 Subaru Outback 2.5i Limited 2010-2014 Subaru Outback 2.5i Premium

Remark 15-22 Subaru WRX STi VA Axle Back Exhaust Stainless Steel Single Wall Tip 4in Cerakote Black

Made to last the new Chevy Silverado Gibson Exhaust Dual Split Cat-Back System is here. For the enthusiast who wants an awesome look and aggressive throaty sound this Dual Split Cat back exhaust is for you. Gibson Exhaust Systems decrease backpressure and produce more torque and increased horsepower. Typical gains average of 18-20 horsepower. Exhaust exit uses the factory Tips and exit straight out the back. Exhaust sound is louder under towing conditions. Easy bolt-on installation. No welding required. Includes stainless band clamps. Backed by a Lifetime Limited Warranty.This Part Fits: Year Make Model Submodel 2023-2024 Chevrolet Silverado 1500 Custom Trail Boss 2023-2024 Chevrolet Silverado 1500 High Country 2023-2024 Chevrolet Silverado 1500 LT 2023-2024 Chevrolet Silverado 1500 LT Trail Boss 2023-2024 Chevrolet Silverado 1500 LTZ 2023-2024 Chevrolet Silverado 1500 RST 2019-2021,2023-2024 Chevrolet Silverado 1500 WT 2022 Chevrolet Silverado 1500 LTD WT 2019-2021,2023 GMC Sierra 1500 AT4 2019-2021 GMC Sierra 1500 Base 2019-2021,2023-2024 GMC Sierra 1500 Denali 2023-2024 GMC Sierra 1500 Elevation 2023-2024 GMC Sierra 1500 Pro 2019-2021,2023-2024 GMC Sierra 1500 SLE 2019-2021,2023-2024 GMC Sierra 1500 SLT 2022 GMC Sierra 1500 Limited Denali 2022 GMC Sierra 1500 Limited Elevation 2022 GMC Sierra 1500 Limited Pro 2022 GMC Sierra 1500 Limited SLE 2022 GMC Sierra 1500 Limited SLT

The Ford Maverick is made for those who never new they needed a truck. Let Gibson Exhaust show you why you need the Ford Maverick Exhaust! The all new Ford Maverick Exhaust System is built for all adventure. Add a little style to your truck without losing performance. Make your Maverick the center of attention as Gibson Performance Single Side Exit Exhaust System sets your vehicle apart on the street or in the dirt. Hassle free, bolt-on installation with professional looking results. No welding required. Backed by a Lifetime Limited Warranty. Gibson exhaust systems offer a powerful authoritative deep exhaust tone with no annoying noise inside the cab. Your truck will thank you!!! Dyno tested to assure increased horsepower and produce more torque. Gibson strives to provide top-quality products that are 100% made in the USA.This Part Fits: Year Make Model Submodel 2022-2024 Ford Maverick Lariat 2022-2024 Ford Maverick XL 2022-2024 Ford Maverick XLT

REMARK 2023+ Nissan Z Burnt Stainless Double Wall Tip Axle Back Exhaust

REMARK 2023+ Nissan Z Stainless Double Wall Tip Axle Back Exhaust

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2013 Honda Fit Base 2007-2013 Honda Fit Sport

The Large Bore HD Performance Cat-Back exhaust features 4" 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily. You will see increased performance and lower EGTs from this system. This system does not come with a tip.This Part Fits: Year Make Model Submodel 2006 Chevrolet Silverado 2500 HD LS 2006-2007 Chevrolet Silverado 2500 HD LT 2007 Chevrolet Silverado 2500 HD LTZ 2006-2007 Chevrolet Silverado 2500 HD WT 2007 Chevrolet Silverado 2500 HD Classic LS 2007 Chevrolet Silverado 2500 HD Classic LT 2007 Chevrolet Silverado 2500 HD Classic WT 2006 Chevrolet Silverado 3500 LS 2006 Chevrolet Silverado 3500 LT 2006 Chevrolet Silverado 3500 WT 2007 Chevrolet Silverado 3500 Classic LS 2007 Chevrolet Silverado 3500 Classic LT 2007 Chevrolet Silverado 3500 Classic WT 2007 Chevrolet Silverado 3500 HD LT 2007 Chevrolet Silverado 3500 HD LTZ 2007 Chevrolet Silverado 3500 HD WT 2006 GMC Sierra 2500 HD SL 2006-2007 GMC Sierra 2500 HD SLE 2006-2007 GMC Sierra 2500 HD SLT 2006-2007 GMC Sierra 2500 HD WT 2007 GMC Sierra 2500 HD Classic SL 2007 GMC Sierra 2500 HD Classic SLE 2007 GMC Sierra 2500 HD Classic SLT 2007 GMC Sierra 2500 HD Classic WT 2006 GMC Sierra 3500 SL 2006 GMC Sierra 3500 SLE 2006 GMC Sierra 3500 SLT 2006 GMC Sierra 3500 WT 2007 GMC Sierra 3500 Classic SL 2007 GMC Sierra 3500 Classic SLE 2007 GMC Sierra 3500 Classic SLT 2007 GMC Sierra 3500 Classic WT 2007 GMC Sierra 3500 HD SLE 2007 GMC Sierra 3500 HD SLT 2007 GMC Sierra 3500 HD WT

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52220. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2010-2016 Cadillac SRX and 2011 Saab 9-4X, this direct-fit catalytic converter also interchanges with OE parts 22913044 and 20899953. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2010-2016 Cadillac SRX Base 2010-2016 Cadillac SRX Luxury 2010-2016 Cadillac SRX Performance 2010-2016 Cadillac SRX Premium 2011 Saab 9-4X Base 2011 Saab 9-4X Premium

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51377. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2010 Volkswagen Beetle and interchanges with OE parts 1J0 254 508 R and 1J0 254 506 R, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2006-2007 Volkswagen Beetle 2.5 2009-2010 Volkswagen Beetle Base 2008 Volkswagen Beetle S 2008 Volkswagen Beetle SE

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 457002 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2002-2005 Hyundai Sonata and 2002-2006 Kia Optima, this direct-fit catalytic converter also interchanges with OE part 28610-3C875. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2002-2004 Hyundai Sonata Base 2004-2005 Hyundai Sonata GL 2002-2005 Hyundai Sonata GLS 2002-2005 Hyundai Sonata LX 2004-2006 Kia Optima EX 2002-2006 Kia Optima LX 2002-2003 Kia Optima SE

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452023 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-1999 Nissan Sentra and 1995-1998 Nissan 200SX, this direct-fit catalytic converter also interchanges with OE parts 14002-1M510 and 14002-3M200. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 1995-1998 Nissan 200SX Base 1995-1998 Nissan 200SX SE 1995-1998 Nissan Sentra Base 1995-1998 Nissan Sentra GLE 1995-1999 Nissan Sentra GXE 1995-1999 Nissan Sentra XE

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23058. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1996-1998 BMW 740iL, 1997-1998 BMW 540i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 30 7 505 322 and 18 30 1 437 354, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 1997-1998 BMW 540i Base 1997-1998 BMW 740i Base 1996-1998 BMW 740iL Base 2015 Chevrolet Express 3500 Base

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a mild sound. Finishing off this exhaust system are dual 4 IN diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2019-2024 Toyota RAV4 Adventure 2019-2024 Toyota RAV4 LE 2019-2024 Toyota RAV4 Limited 2020-2024 Toyota RAV4 TRD Off-Road 2019-2024 Toyota RAV4 XLE 2019-2024 Toyota RAV4 XLE Premium

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51916. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2008-2011 Mercedes-Benz C300, 2010-2011 Mercedes-Benz E350, and more, this direct-fit catalytic converter also interchanges with OE parts 204 490 07 20 80 and 204 490 14 19 80, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2008-2011 Mercedes-Benz C300 4Matic Luxury 2008-2011 Mercedes-Benz C300 4Matic Sport 2008-2011 Mercedes-Benz C300 Luxury 2008-2011 Mercedes-Benz C300 Sport 2008-2011 Mercedes-Benz C350 Sport 2010-2011 Mercedes-Benz E350 4Matic 2010-2011 Mercedes-Benz E350 Base

Now your 19-20 Silverado/Sierra can have that custom look with this aFe POWER Apollo GT cat-back exhaust system. 3" mandrel-bent, 409 stainless steel tubing and high-flow muffler improves performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability with a 5" polished 304 stainless steel exhaust tip for a custom look.3" 409 Stainless Steel Tubing: This system is constructed of durable mandrel-bent 3" 409 stainless steel tubing for strength and durability. Mandrel-bent tubing maximizes air flow and decreases turbulence, delivering increased torque, horsepower, and improved throttle response.High-Flow Performance Muffler: A high-flow stainless steel muffler allows increased exhaust flow and reduces exhaust drone, maintaining a deep, tuned sound.Polished 5" Tip: A 5" polished 304 stainless steel clamp on exhaust tip, with a laser cut aFe POWER badge for a custom-styled look.Perfect Fit: Factory-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions for a secure fit.Hassle-Free Installation: No cutting or modifications required. Quality hardware and clamps are included for a hassle-free installation.This item fits: Crew Cab / Short Bed (69.92"), Crew Cab / Standard Bed (79.44"), Double Cab / Standard Bed (79.44")Emissions Disclaimer: This product does not require a CARB EO#All aFe POWER exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.This Part Fits: Year Make Model Submodel 2019-2021 Chevrolet Silverado 1500 Custom 2019-2021 Chevrolet Silverado 1500 Custom Trail Boss 2019-2021 Chevrolet Silverado 1500 High Country 2019-2024 Chevrolet Silverado 1500 LT 2019-2021 Chevrolet Silverado 1500 LTZ 2019-2024 Chevrolet Silverado 1500 RST 2019-2021 Chevrolet Silverado 1500 SSV 2019-2024 Chevrolet Silverado 1500 WT 2019-2021 GMC Sierra 1500 AT4 2019-2021 GMC Sierra 1500 Base 2019-2024 GMC Sierra 1500 Denali 2019-2024 GMC Sierra 1500 Elevation 2022-2024 GMC Sierra 1500 Pro 2019-2024 GMC Sierra 1500 SLE 2019-2024 GMC Sierra 1500 SLT

This system produced gains of up to +10 HP and +9 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2016 Hyundai Veloster Rally Edition 2013-2017 Hyundai Veloster Turbo 2014-2017 Hyundai Veloster Turbo R-Spec

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52401. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2015 Audi Q7 and interchanges with OE parts 7L8 254 350 SX and 7L8 254 350 NX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2015 Audi Q7 Premium 2011-2015 Audi Q7 Premium Plus 2011-2015 Audi Q7 Prestige 2011-2015 Audi Q7 TDI Premium 2011-2015 Audi Q7 TDI Premium Plus 2011-2015 Audi Q7 TDI Prestige

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51218. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2011-2015 Ford Explorer, 2011-2018 Ford Edge, and more, this direct-fit catalytic converter also interchanges with OE parts DA8Z-5G232-C and DG9Z-5G232-D, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2011-2014 Ford Edge Limited 2011-2015,2018 Ford Edge SE 2011-2018 Ford Edge SEL 2011-2014 Ford Edge Sport 2015-2018 Ford Edge Titanium 2011-2019 Ford Explorer Base 2011-2019 Ford Explorer Limited 2018-2019 Ford Explorer Platinum 2013-2015,2018-2019 Ford Explorer Sport 2011-2019 Ford Explorer XLT 2013-2019 Ford Flex Limited 2013-2019 Ford Flex SE 2013-2019 Ford Flex SEL 2013-2019 Ford Police Interceptor Sedan Base 2013-2019 Ford Police Interceptor Utility Base 2013-2019 Ford Taurus Limited 2013-2019 Ford Taurus SE 2013-2019 Ford Taurus SEL 2013-2019 Ford Taurus SHO 2019-2020 Lincoln Continental Base 2017-2020 Lincoln Continental Livery 2017-2018 Lincoln Continental Premiere 2017-2019 Lincoln Continental Select 2011-2016 Lincoln MKS Base 2011-2017 Lincoln MKT Base 2019 Lincoln MKT Limousine 2013-2017,2019 Lincoln MKT Livery 2018 Lincoln MKT Premiere 2011-2015 Lincoln MKX Base 2016-2018 Lincoln MKX Black Label 2016-2018 Lincoln MKX Premiere 2016-2018 Lincoln MKX Reserve 2016-2018 Lincoln MKX Select 2013-2016 Lincoln MKZ Base 2015-2016 Lincoln MKZ Black Label

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 333388 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1989-1994 Ford Ranger, 1991-1994 Ford Explorer, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 1990 Ford Bronco II Eddie Bauer 1990 Ford Bronco II XL 1990 Ford Bronco II XL Sport 1990 Ford Bronco II XLT 1990 Ford Bronco II XLT Plus 1991-1994 Ford Explorer Eddie Bauer 1993-1994 Ford Explorer Limited 1991-1994 Ford Explorer Sport 1991-1994 Ford Explorer XL 1991-1994 Ford Explorer XLT 1989-1992 Ford Ranger Custom 1989 Ford Ranger GT 1989-1992 Ford Ranger S 1990 Ford Ranger S Plus 1993-1994 Ford Ranger Splash 1991-1993 Ford Ranger Sport 1989-1994 Ford Ranger STX 1993-1994 Ford Ranger XL 1989-1994 Ford Ranger XLT 1992-1994 Mazda Navajo DX 1991-1994 Mazda Navajo LX