Give your Jeep Wrangler a massive upgrade in lighting with the Putco Luminix high-power LED headlights. This pair of OEM replacement LED headlights push up to 12,000 lumens on high beams and 7,200 lumens on low beams. The construction of these lights is like no other on the market, constructed out of aircraft aluminum, and includes built-in thermal control chips with under/over voltage protection.Each bulb has a 50,000 hour LED  bulb life and is extremely water and dust-resistant. The Luminix headlights are direct plug-and-play with no cutting or drilling needed. So if you are in the market for new headlights the Luminix high-power LED are the perfect upgrade for you. The Jeep LED headlights are proudly designed and manufactured in the USA and are backed by a three-year warranty.WarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 1959-1966 Jeep CJ3 Base 1959-1983 Jeep CJ5 Base 1977-1980 Jeep CJ5 Golden Eagle 1980-1983 Jeep CJ5 Laredo 1982-1983 Jeep CJ5 Limited 1975-1983 Jeep CJ5 Renegade 1966-1968 Jeep CJ5A Base 1959-1975 Jeep CJ6 Base 1966-1968 Jeep CJ6A Base 1976-1986 Jeep CJ7 Base 1977-1979 Jeep CJ7 Golden Eagle 1980 Jeep CJ7 Golden Hawk 1980-1983,1985-1986 Jeep CJ7 Laredo 1982-1983 Jeep CJ7 Limited 1976-1986 Jeep CJ7 Renegade 1981-1985 Jeep Scrambler Base 1985 Jeep Scrambler Laredo 1985 Jeep Scrambler Renegade 1982-1983 Jeep Scrambler SL 1982-1984 Jeep Scrambler SR 1955-1958 Jeep Willys CJ-3 1955-1958 Jeep Willys CJ-5 1956-1958 Jeep Willys CJ-6 2006 Jeep Wrangler 65th Anniversary Edition 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2003-2017 Jeep Wrangler Rubicon 1997-2004,2007-2017 Jeep Wrangler Sahara 1997-2006 Jeep Wrangler SE 1997-2006,2010-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2004-2006 Jeep Wrangler Unlimited 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2005-2017 Jeep Wrangler Unlimited Rubicon 2007-2017 Jeep Wrangler Unlimited Sahara 2010-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2002-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

These LED light bars by Putco are 300% smaller than most LED light bars, but even more powerful with 3 watt / 0.25 amp power draw from each Nichia LED along with 50,000 hours of life. Putco Luminix LED lights comes with a wiring and are designed to work with 12V-36v without any modification. Each Luminix LED light bar includes a thermal control chip for over/under voltage protection and is rated to work from minus -100°F to 180°F. Available in straight or the unique radius light bars designed for applications such as on top of your factory bumper. Mount these LED lights just about anywhere on your truck or SUV, from on the factory bumper, to the roof top, behind the grille, under the bumper, with a billet grill insert and more. Each light bar includes adjustable mounting brackets and made in a 6000 series aluminum housing with a matte black (flat black) finish. Available in sizes from 4 in. to 70 in. lengths including 4 in. blocks, 5 in. round, 10 in., 20 in., 30 in., 40 in., 50 in., 60 in., & 70 in. straight & curved LED light bar.WarrantyInstallation Instructions

These LED light bars by Putco are 300% smaller than most LED light bars, but even more powerful with 3 watt / 0.25 amp power draw from each Nichia LED along with 50,000 hours of life. Putco Luminix LED lights comes with a wiring and are designed to work with 12V-36v without any modification. Each Luminix LED light bar includes a thermal control chip for over/under voltage protection and is rated to work from minus -100°F to 180°F. Available in straight or the unique radius light bars designed for applications such as on top of your factory bumper. Mount these LED lights just about anywhere on your truck or SUV, from on the factory bumper, to the roof top, behind the grille, under the bumper, with a billet grill insert and more. Each light bar includes adjustable mounting brackets and made in a 6000 series aluminum housing with a matte black (flat black) finish. Available in sizes from 4 in. to 70 in. lengths including 4 in. blocks, 5 in. round, 10 in., 20 in., 30 in., 40 in., 50 in., 60 in., & 70 in. straight & curved LED light bar.WarrantyInstallation Instructions

These LED light bars by Putco are 300% smaller than most LED light bars, but even more powerful with 3 watt / 0.25 amp power draw from each Nichia LED along with 50,000 hours of life. Putco Luminix LED lights comes with a wiring and are designed to work with 12V-36v without any modification. Each Luminix LED light bar includes a thermal control chip for over/under voltage protection and is rated to work from minus -100°F to 180°F. Available in straight or the unique radius light bars designed for applications such as on top of your factory bumper. Mount these LED lights just about anywhere on your truck or SUV, from on the factory bumper, to the roof top, behind the grille, under the bumper, with a billet grill insert and more. Each light bar includes adjustable mounting brackets and made in a 6000 series aluminum housing with a matte black (flat black) finish. Available in sizes from 4 in. to 70 in. lengths including 4 in. blocks, 5 in. round, 10 in., 20 in., 30 in., 40 in., 50 in., 60 in., & 70 in. straight & curved LED light bar.WarrantyInstallation Instructions

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Upgrade the lighting capability of your Jeep Wrangler with the most advanced lighting solution on the market.The Putco Luminix Jeep LED roof-mounted kit includes direct-fit brackets that utilize the OEM mounting locations on your Roof for a fast and simple installation, this means no drills or Sawzall are required, it's a simple bolt-on installation!. The brackets are CNC Cut from a durable 12 gauge stainless steel and then finished with a durable black textured powder coat, this allows for a long-lasting corrosion-resistant bracket with a nice black finish for a flawless look.The kit is equipped with a 50" High Power Luminix Light Bar, boasting the thinnest design on the market. These light bars are constructed from a billet aluminum housing with a black anodized finish and equipped with high-power Cree LEDs behind each optic lens for maximum light output and a highly-focused beam that will illuminate everything in front of you!This product was designed and proudly manufactured in the USA by Putco Inc.WarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2007-2017 Jeep Wrangler Rubicon 2007-2017 Jeep Wrangler Sahara 2010-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2007-2017 Jeep Wrangler Unlimited Rubicon 2007-2017 Jeep Wrangler Unlimited Sahara 2010-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Putco's Luminix LED Light Bar is designed & engineered for a 15 degree focus lenses with output from 1200LM to 27,600LM for offroad lighting use. Built to handle the elements of all your adventures and creates a super bright LED beam pattern.  These offroad led light bars for trucks, side by sides, trailers and more are powered by 12 volt can also do 24 volts and 36 volts.  Putco Luminix light bars are the thinnest light bars in the world, made right here in the USA.The housing is made of anodize matte black billet aluminum with a UV protected anodized finish for durability and years of great looks and super strong durability. This LED light bar can handle of the bumper, jars, and pounding you are truck gets on and off-road and still work under extreme conditions. The Luminix LED light bars are the rated, with a 400 lumens per LED output, 6000k color temperature for the absolute best offroad lighting experience.  They have been vibration tested, dust, immersion, high spray water, salt and fog for superior performance.  Manufactured by Putco of Des Moines, IA.WarrantyInstallation Instructions

Pace Edwards 15-20 Ford F-Series Lightduty Jackrabbit Canister

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace's patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a in.soft Top in. look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 in. wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace's patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a in.soft Top in. look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 in. wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.This Part Fits: Year Make Model Submodel 2008 Ford F-150 FX2 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2014 Ford F-150 XL 2004-2014 Ford F-150 XLT 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace's patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a in.soft Top in. look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 in. wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.This Part Fits: Year Make Model Submodel 2007-2008,2010-2013 Ford F-150 FX2 2004-2014 Ford F-150 FX4 2006 Ford F-150 Harley-Davidson Edition 2008-2014 Ford F-150 King Ranch 2004-2014 Ford F-150 Lariat 2009-2014 Ford F-150 Platinum 2004-2014 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2014 Ford F-150 XL 2004-2014 Ford F-150 XLT 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace's patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a in.soft Top in. look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 in. wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace's patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a in.soft Top in. look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 in. wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace's patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a in.soft Top in. look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 in. wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.This Part Fits: Year Make Model Submodel 2008 Ford F-150 FX2 2008 Ford F-150 Lariat 2010 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2014 Ford F-150 XL 2004-2014 Ford F-150 XLT

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace's patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a in.soft Top in. look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 in. wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.This Part Fits: Year Make Model Submodel 2007-2008,2010-2014 Ford F-150 FX2 2004-2014 Ford F-150 FX4 2006 Ford F-150 Harley-Davidson Edition 2008-2014 Ford F-150 King Ranch 2004-2014 Ford F-150 Lariat 2009-2014 Ford F-150 Platinum 2004-2014 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2014 Ford F-150 XL 2004-2014 Ford F-150 XLT 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT

Pace Edwards 15-20 Ford F-Series Lightduty Switchblade Metal Canister

Pace Edwards JackRabbit retractable hard tonneau covers retract automatically with the turn of a knob, and close easily using a pull strap. The covers open and close without needing the key, have locking positions every 12 in., and automatically catch into each position as you pull them forward. They also have a low-profile, aerodynamic design that is 100 percent flush-mounted with textured finish rails and top cover. Featuring a clamp-in design and for easy accessibility, the handle and lock are mounted to the driver side for convenient, easy use.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Pace Edwards JackRabbit retractable hard tonneau covers retract automatically with the turn of a knob, and close easily using a pull strap. The covers open and close without needing the key, have locking positions every 12 in., and automatically catch into each position as you pull them forward. They also have a low-profile, aerodynamic design that is 100 percent flush-mounted with textured finish rails and top cover. Featuring a clamp-in design and for easy accessibility, the handle and lock are mounted to the driver side for convenient, easy use.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Pace Edwards JackRabbit retractable hard tonneau covers retract automatically with the turn of a knob, and close easily using a pull strap. The covers open and close without needing the key, have locking positions every 12 in., and automatically catch into each position as you pull them forward. They also have a low-profile, aerodynamic design that is 100 percent flush-mounted with textured finish rails and top cover. Featuring a clamp-in design and for easy accessibility, the handle and lock are mounted to the driver side for convenient, easy use.This Part Fits: Year Make Model Submodel 2021-2024 Ford F-250 Super Duty King Ranch 2021-2024 Ford F-250 Super Duty Lariat 2021-2024 Ford F-250 Super Duty Limited 2021-2024 Ford F-250 Super Duty Platinum 2021-2024 Ford F-250 Super Duty XL 2021-2024 Ford F-250 Super Duty XLT 2021-2024 Ford F-350 Super Duty King Ranch 2021-2024 Ford F-350 Super Duty Lariat 2021-2024 Ford F-350 Super Duty Limited 2021-2024 Ford F-350 Super Duty Platinum 2021-2024 Ford F-350 Super Duty XL 2021-2024 Ford F-350 Super Duty XLT

Pace Edwards JackRabbit retractable hard tonneau covers retract automatically with the turn of a knob, and close easily using a pull strap. The covers open and close without needing the key, have locking positions every 12 in., and automatically catch into each position as you pull them forward. They also have a low-profile, aerodynamic design that is 100 percent flush-mounted with textured finish rails and top cover. Featuring a clamp-in design and for easy accessibility, the handle and lock are mounted to the driver side for convenient, easy use.This Part Fits: Year Make Model Submodel 2021-2024 Ford F-150 King Ranch 2021-2024 Ford F-150 Lariat 2021-2024 Ford F-150 Platinum 2021-2024 Ford F-150 SSV 2024 Ford F-150 STX 2021-2024 Ford F-150 XL 2021-2024 Ford F-150 XLT

All of the features and benefits of the original JackRabbit truck bed covers come together with the added quality of an all-metal cover to create the Full Metal JackRabbits. All operation and installation of these covers is the same, but with the Full Metal JackRabbit tonneau covers, you get the added strength and good looks of all-metal, interlocked, powdercoated aluminum panels. The Full Metal JackRabbits' weather-sealed, low-profile, Latch-n-Lok handle system allows the covers to be latched every 12 in. With the Pace Edwards Continuous Tension Spring, smooth operation is ensured every time you open or close these truck bed covers. Their flush-mounted, top-cover design also provides a sleek, low-profile look that enhances the appearance of your truck.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

All of the features and benefits of the original JackRabbit truck bed covers come together with the added quality of an all-metal cover to create the Full Metal JackRabbits. All operation and installation of these covers is the same, but with the Full Metal JackRabbit tonneau covers, you get the added strength and good looks of all-metal, interlocked, powdercoated aluminum panels. The Full Metal JackRabbits' weather-sealed, low-profile, Latch-n-Lok handle system allows the covers to be latched every 12 in. With the Pace Edwards Continuous Tension Spring, smooth operation is ensured every time you open or close these truck bed covers. Their flush-mounted, top-cover design also provides a sleek, low-profile look that enhances the appearance of your truck.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

These BedLocker combos are Pace Edwards' innovative electric retractable tonneau covers. They feature a flush-mounted design and a textured black finish for tremendous strength, security, durability, and style. Operated via remote control, they open and close at the touch of a button in less than 30 seconds, and can be stopped at any point. With their drop-in, clamp-in design, these systems require no drilling on most applications, and install in less than one hour. Packed with value-added features, the BedLocker's patented silicone rubber hinge seal will not allow water to penetrate the retractable blanket. The covers are equipped with a motor drive for ultimate performance and reliability.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

These BedLocker combos are Pace Edwards' innovative electric retractable tonneau covers. They feature a flush-mounted design and a textured black finish for tremendous strength, security, durability, and style. Operated via remote control, they open and close at the touch of a button in less than 30 seconds, and can be stopped at any point. With their drop-in, clamp-in design, these systems require no drilling on most applications, and install in less than one hour. Packed with value-added features, the BedLocker's patented silicone rubber hinge seal will not allow water to penetrate the retractable blanket. The covers are equipped with a motor drive for ultimate performance and reliability.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

With a built-in RES(TM) rail expansion system, UltraGroove(TM)  makes it easy to attach nearly any Thule(R) or Yakima(R) rack for bikes, kayaks, cargo baskets and more. With or without racks, it's incredibly easy to use and it's covered with a weather-resistant, padded ArmorTek deck laminated to rigid aluminum panels. It opens quickly with just a turn of the lock knob and closes just as easily with a pull on the built-in strap.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

With a built-in RES(TM) rail expansion system, UltraGroove(TM)  makes it easy to attach nearly any Thule(R) or Yakima(R) rack for bikes, kayaks, cargo baskets and more. With or without racks, it's incredibly easy to use and it's covered with a weather-resistant, padded ArmorTek deck laminated to rigid aluminum panels. It opens quickly with just a turn of the lock knob and closes just as easily with a pull on the built-in strap.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

With a built-in RES(TM) rail expansion system, UltraGroove(TM)  makes it easy to attach nearly any Thule(R) or Yakima(R) rack for bikes, kayaks, cargo baskets and more. With or without racks, it's incredibly easy to use and it's covered with a weather-resistant, padded ArmorTek deck laminated to rigid aluminum panels. It opens quickly with just a turn of the lock knob and closes just as easily with a pull on the built-in strap.This Part Fits: Year Make Model Submodel 2007-2008,2010-2014 Ford F-150 FX2 2004-2014 Ford F-150 FX4 2006 Ford F-150 Harley-Davidson Edition 2008-2014 Ford F-150 King Ranch 2004-2014 Ford F-150 Lariat 2009-2014 Ford F-150 Platinum 2004-2014 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2014 Ford F-150 XL 2004-2014 Ford F-150 XLT

Pace Edwards 15-16 Ford F-Series LightDuty 6ft 5in Bed UltraGroove (Box 1 for KRFA06A29)

UltraGroove Metal(TM) is a retractable tonneau that makes it easy to attach nearly any Thule(R) or Yakima(R) rack to carry bikes, kayaks, cargo baskets and more. It offers truck owners the metal look with heavy-gauge aluminum panels and a tough, powder-coated, matte-black surface. With or without racks, UltraGroove Metal is a great-looking retractable tonneau that's incredibly easy to use. It opens quickly with just a turn of the lock knob and closes just as easily with a pull on the built-in strap. ' The built-in RES(TM) rail expansion system can quickly be outfitted with racks to carry your recreational gear.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

UltraGroove Metal(TM) is a retractable tonneau that makes it easy to attach nearly any Thule(R) or Yakima(R) rack to carry bikes, kayaks, cargo baskets and more. It offers truck owners the metal look with heavy-gauge aluminum panels and a tough, powder-coated, matte-black surface. With or without racks, UltraGroove Metal is a great-looking retractable tonneau that's incredibly easy to use. It opens quickly with just a turn of the lock knob and closes just as easily with a pull on the built-in strap. ' The built-in RES(TM) rail expansion system can quickly be outfitted with racks to carry your recreational gear.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT