Edelbrock part #178060 is a rebuild kit for electric fuel pumps. This kit includes hardware and internal components of the fuel pump. For gasoline and alcohol applications only.Installation Instructions

The Edelbrock Carburetor Spacer #8713 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8711 4-hole spacer is 2" thick and made of Black Phenolic Plastic.Warranty

The Edelbrock Carburetor Spacer #8712 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8710 open spacer is 2" thick and made of Black Phenolic Plastic.Warranty

Edelbrock #1469 EPS And Thunder?Series AVS Float kit ?(Includes Two Floats, Two Pins And A Float Setting Gauge)?Warranty

Performer Series and Thunder AVS Carburetor Metering Rods .065 x .052in. (Qty 2)WarrantyInstallation Instructions

Carb Metering Rod #1453 Size .071 x .047 AVS2, Performer & Thunder Carbs (Pair)WarrantyInstallation Instructions

The Edelbrock Carburetor Spacer #8724 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8724 is 1/2" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Standard Flange Adapter #8716 adapts 4150 Series standard-flange carburetor to 4500 Series intake manifold flange.Warranty

The Edelbrock Carburetor Adaptor #2691 is designed mounts 4-bbl. Carter Thermo-Quad carburetors to square-bore, single plane intake manifolds.Warranty

The Edelbrock #1499 air horn gasket is placed in between the carburetor lid and base upon lid installation. The set comes with a total of 5 gaskets.Installation InstructionsWarrantyInstallation InstructionsInstallation Instructions

The Edelbrock #1493 throttle cable plate kit was designed for 351C, 351M/400 Fords with cable activated throttle and automatic transmission kickdown rods. The Edelbrock #1493 throttle cable plate kit repositions the stock throttle cable bracket to align with the Edelbrock carburetor throttle arm. Use with Edelbrock throttle lever adapter #1483 and stock cable bracket when necessary. Available in Gold iridited finish. Edelbrock throttle cable plate kits only work when the throttle bracket is mounted to the intake.?This kit makes hooking up your throttle a simple task.WarrantyThis Part Fits: Year Make Model Submodel 1970 Ford Falcon Base 1970 Ford Falcon Futura 1972-1974 Ford Gran Torino Base 1974 Ford Gran Torino Brougham 1974 Ford Gran Torino Elite 1972-1974 Ford Gran Torino Sport 1972-1974 Ford Gran Torino Squire 1970-1973 Ford Mustang Base 1970-1973 Ford Mustang Grande 1970-1973 Ford Mustang Mach 1 1970-1974 Ford Ranchero 500 1970-1971 Ford Ranchero Base 1970-1974,1977-1978 Ford Ranchero GT 1970-1974 Ford Ranchero Squire 1971 Ford Torino 500 1970-1974 Ford Torino Base 1970-1971 Ford Torino Brougham 1971 Ford Torino Cobra 1970-1971 Ford Torino GT 1970-1971 Ford Torino Squire 1970-1973 Mercury Cougar Base 1970-1974 Mercury Cougar XR-7 1970-1971 Mercury Cyclone Base 1970-1971 Mercury Cyclone GT 1971 Mercury Cyclone Spoiler 1970-1974 Mercury Montego Base 1972-1973 Mercury Montego GT 1970-1974 Mercury Montego MX 1970-1974 Mercury Montego MX Brougham 1970-1974 Mercury Montego Villager

Edelbrock Marine Series 1409 carburetor calibration kit when installed on a 4.3L 90 Deg V6Warranty

Carb Metering Rod #1463 Size .067 x .055 AVS2, Performer & Thunder Carbs (Pair)WarrantyInstallation Instructions

Carb Metering Rod #1461 Size .065 x .057 AVS2, Performer & Thunder Carbs (Pair)WarrantyInstallation Instructions

Carb Metering Rod #1451 Size .070 x .047 AVS2, Performer & Thunder Carbs (Pair)WarrantyInstallation Instructions

The Edelbrock 94 Carburetor choke bracket kit #1156 provides users with a means of holding a manual choke cable in place upon attaching the cable pull to the carburetor. It includes the bracket and associated hardware. It is a replica of the original Ford bracket that mounted to the carburetor.Installation Instructions

Edelbrock part #9290 A/B epoxy is a two part epoxy that is great for cylinder head and intake modifications. Simply mix the two parts, apply and let cure. Once cured, it can be sanded to shape, drilled and tapped. Wash hands well after handling.Warranty

The Edelbrock part #9179 Automatic divorced choke rod was designed to be used with Edelbrock Intake Manifold part #2161 and 3761 with a Q-Jet carburetor. The Edelbrock 9179 Automatic Divorced Choke Rod will allow for a simple installation. Comes with a retaining clip.?Warranty

Edelbrock #9141 Throttle Rod Shoulder Stud - ChevyWarranty

The Edelbrock?Choke Block-Off for Small Block Ford 351W/ 351C ?Intake ManifoldsWarranty

The Edelbrock #8971?Choke Block-Off Small Block Ford 351M/ 400M for #2171, #3711 Intake ManifoldWarranty

The Edelbrock #8961 Choke Block-Off for Big Block Chevrolet With #2161 Intake Manifold.Warranty

The Edelbrock #8951 Choke Block-Off For?Small Block Oldsmobile for #3711 Intake ManifoldWarranty

The Edelbrock #8901 Choke Block-Off For?Small Block Chevrolet With #2101, #2104, #3701 Intake ManifoldsWarranty

This Edelbrock #8751 is a 1/4" heat insulator spacer kit for Edelbrock 94 Series and Stromberg 97 3-bolt carburetors. The black wood laminate fiber spacer is ideal for reducing heat transfer from the intake manifold to the carburetor. Includes all necessary hardware for a complete installation. Highly recommended!

The Edelbrock Q-Jet Carburetor Spacer #8726 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8726 spacer is 3/4" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Q-Jet Carburetor Spacer #8726 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8726 spacer is 3/4" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Carburetor Spacer #8723 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8723 spacer is 1/2" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Carburetor Spacer #8723 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8723 spacer is 1/2" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Carburetor Spacer #8720 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8720 is 1" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Carburetor Spacer #8719 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8719 is 3/4" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Carburetor Spacer #8719 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8719 is 3/4" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.Warranty

The Edelbrock Carburetor Spacer #8718 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8718 cloverleaf, aluminum, open spacer is 1" thick and works with Edelbrock 4500 Series cloverleaf manifolds.Warranty

The Edelbrock Carburetor Spacer #8717 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8717 aluminum open spacer is 1" thick and works with 4500 Series carbs.Warranty

The Edelbrock Carburetor Spacer #8712 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8710 open spacer is 2" thick and made of Black Phenolic Plastic.Warranty

The Edelbrock Carburetor Spacer #8710 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8710 open spacer is 1" thick and made of Black Phenolic Plastic.Warranty