Bumpers

Westins WJ2 Bumper is constructed with high-strength 3/16-inch plate steel. Our WJ2 Bumper improves ground and tire clearance while offering corner light mount points and rock light mount points, plus 2 side and 2 front off-road jack points. Your winch fits down inside the bumper to allow maximum air flow to your vehicles radiator and the WJ2 Bumper includes pre-drilled holes to allow installation of a winch while the bumper is already installed on your Jeep – most other brands wont! Product features recovery hooks with a recovery shackle mounting point to allow easy tow strap attachment. Bolt-on installation so no drilling is required. Recommended optional skid plate sold separately. Includes bumper, mounting hardware and install instructions. Rock Light Mount Points Bolt On Installation; No Drill Required Integrated Recovery Shackle Mount Points Includes Bumper; Mounting Hardware And Install Instructions Designed To Work With Factory Or Westin Hitches Auxiliary Light Mount Points 2 Off-Road Jack Points 0.1875 in. Plate Steel Construction Additional Attributes: GTIN: 00707742083475 Bumper Style: Full Width w/Center Winch Mount Color: Black Textured WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 76.0000 x 21.0000 x 15.0000 inches PDF: 75-598002

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel and features 2 off-road jack mount points. This clean, stylish bumper is designed to work with factory or Westin hitches. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Bolt on installation so no drilling is required. Includes bumper, mounting hardware and install instructions. 3/16-Inch Plate Steel Construction Designed To Work With Factory Or Westin Hitches Integrated Recovery Shackle Mount Points Auxiliary Light Mount Points Rock Light Mount Points 2 Off-Road Jack Points No Drilling Required - Bolt On Installation Includes Bumper; Mounting Hardware And Install Instructions Additional Attributes: GTIN: 00707742083499 Bumper Style: Custom Color: Black Textured WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 70.0000 x 18.0000 x 10.0000 inches PDF: 75-598200

Stand out from the Competition with the all new HDX Bandit Rear Bumper from Westin. Built to compliment the style, precision, and durability of the matching HDX Bandit Front Bumper, this all new "off-road style" rear bumper, is clearly a cut above. Unlike the competition, which features an overlapping two piece design and an ugly weld which can warp the metal and is prone to rust, the new HDX Bandit Rear Bumper features an extremely clean, one piece design. The stamped diamond plate step surface is constructed of 11 gauge plate steel and features a welded inner structure for maximum strength. A unique "corner step" design provides extra wide step area to allow easy access to bed and cargo area. HDX Bandit Rear Bumper includes hardware, mounting brackets, flush mount LED license plate lights and two standard LED back up lights. Fully compatible with blind spot monitors and parking sensors, and can also accommodate an OEM hitch. HDX Bandit Rear is designed for heavy duty performance and extended life that is backed by a 3 year warranty with a black powder coat finish. The new HDX Bandit Rear Bumper is truly in a class by itself. Protects Vehicle From Damage Against Wildlife And Road Debris Custom Die Cast Riveted Logo Badge Mounting Provisions For License Plate Hardware Mounting Brackets Included Provides Added Safety To Driver And Vehicle Heavy Duty Diamond Plate Steel Honeycomb Mesh Protects Grille/Gives Maximum Airflow 1.5 in. Headlight Protection Tubes 2 in. Full Wraparound Wings Ties Into Bumper Provisions For Factory Parking Sensors 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts Compatible For Factory Fog Lamps Or LED Post Mount Lights Additional Attributes: GTIN: 00707742098929 Color: Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 82.0000 x 22.0000 x 13.0000 inches

High and Tight best describes the great looking new Pro-Series Rear Bumpers from Westin. This all new "off road style" rear bumper features a light weight, slim, one-piece design, adding a modern, aggressive look to your truck. Built to improve ground clearance and departure angles when driving in more rugged terrain. The Pro-Series Rear Bumper is fully compatible for OEM parking sensors, hitch, and blind spot monitors. It also includes two LED license plate lights and can accommodate LED back up lights (sold separately). Featuring a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements with easy bolt-on installation. Just add the original Pro-Mod Front Bumper, and your transformation from stock to custom is complete. Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Compatible For Blind Spot Monitors And Parking Sensors Accommodate For Oem Hitch And Led Back Up Lights Configured To Accept 2 Fm6 Led Flush Mount Custom Laser-Cut Westin Logo Hardware And Mounting Brackets Included Bolt-On Installation - No Drilling Required Additional Attributes: GTIN: 00707742095898 Color: Textured Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 82.0000 x 20.0000 x 10.0000 inches

High and Tight best describes the great looking new Pro-Series Rear Bumpers from Westin. This all new "off road style" rear bumper features a light weight, slim, one-piece design, adding a modern, aggressive look to your truck. Built to improve ground clearance and departure angles when driving in more rugged terrain. The Pro-Series Rear Bumper is fully compatible for OEM parking sensors, hitch, and blind spot monitors. It also includes two LED license plate lights and can accommodate LED back up lights (sold separately). Featuring a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements with easy bolt-on installation. Just add the original Pro-Mod Front Bumper, and your transformation from stock to custom is complete. Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Compatible For Blind Spot Monitors And Parking Sensors Accommodate For Oem Hitch And Led Back Up Lights Configured To Accept 2 Fm6 Led Flush Mount Custom Laser-Cut Westin Logo Hardware And Mounting Brackets Included Bolt-On Installation - No Drilling Required Additional Attributes: GTIN: 00707742096192 Color: Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 76.0000 x 13.0000 x 12.0000 inches

Westins Pro-Mod Front Bumper combines enhanced vehicle protection, with great looks. Pro-Mods revolutionary lightweight modular design is uniquely engineered with outrigger reinforcement brackets to provide maximum front end protection without compromising on strength, integrity or durability. The "high and tight" bumper profile creates a greater approach angle, which significantly improves off-road driving capabilities. The lightweight design also requires smaller shipping packages which dramatically reduces shipping costs. Pro-Mod bumpers feature a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements. Once you see the Pro-Mod Front Bumper, the choice becomes obvious. Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength Outrigger Brackets Support Wings Of Bumper For Maximum Strength Hardware And Mounting Brackets Included E-Coated Base Coat Provides Long Lasting Corrosion Protection Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area Has Provisions For Factory Sensors - On Some Applications 10 Gauge Steel Valance Included - On Some Applications Valance Features Laser-Cut Westin Logo Bolt On Skid Plate Available - Sold Separately Compatible For Factory Tow Hooks - On Some Applications Additional Attributes: GTIN: 00707742092484 Bumper Style: Modular Color: Textured Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 56.0000 x 15.0000 x 13.0000 inches

Stand out from the Competition with the all new HDX Bandit Rear Bumper from Westin. Built to compliment the style, precision, and durability of the matching HDX Bandit Front Bumper, this all new "off-road style" rear bumper, is clearly a cut above. Unlike the competition, which features an overlapping two piece design and an ugly weld which can warp the metal and is prone to rust, the new HDX Bandit Rear Bumper features an extremely clean, one piece design. The stamped diamond plate step surface is constructed of 11 gauge plate steel and features a welded inner structure for maximum strength. A unique "corner step" design provides extra wide step area to allow easy access to bed and cargo area. HDX Bandit Rear Bumper includes hardware, mounting brackets, flush mount LED license plate lights and two standard LED back up lights. Fully compatible with blind spot monitors and parking sensors, and can also accommodate an OEM hitch. HDX Bandit Rear is designed for heavy duty performance and extended life that is backed by a 3 year warranty with a black powder coat finish. The new HDX Bandit Rear Bumper is truly in a class by itself. Protects Vehicle From Damage Against Wildlife And Road Debris Custom Die Cast Riveted Logo Badge Mounting Provisions For License Plate Hardware Mounting Brackets Included Provides Added Safety To Driver And Vehicle Heavy Duty Diamond Plate Steel Honeycomb Mesh Protects Grille/Gives Maximum Airflow 1.5 in. Headlight Protection Tubes 2 in. Full Wraparound Wings Ties Into Bumper Provisions For Factory Parking Sensors 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts Compatible For Factory Fog Lamps Or LED Post Mount Lights Additional Attributes: GTIN: 00707742098875 Bumper Style: Custom Color: Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 78.0000 x 14.0000 x 14.0000 inches

High and Tight best describes the great looking new Pro-Series Rear Bumpers from Westin. This all new "off road style" rear bumper features a light weight, slim, one-piece design, adding a modern, aggressive look to your truck. Built to improve ground clearance and departure angles when driving in more rugged terrain. The Pro-Series Rear Bumper is fully compatible for OEM parking sensors, hitch, and blind spot monitors. It also includes two LED license plate lights and can accommodate LED back up lights (sold separately). Featuring a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements with easy bolt-on installation. Just add the original Pro-Mod Front Bumper, and your transformation from stock to custom is complete. Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Compatible For Blind Spot Monitors And Parking Sensors Accommodate For Oem Hitch And Led Back Up Lights Configured To Accept 2 Fm6 Led Flush Mount Custom Laser-Cut Westin Logo Hardware And Mounting Brackets Included Bolt-On Installation - No Drilling Required Additional Attributes: GTIN: 00707742095874 Color: Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 77.0000 x 12.0000 x 15.0000 inches

Pro-Series Front Bumper; w/Angular Bull Bar; Textured Black; Low Profile Design Hardware And Mounting Brackets Included E-Coated Base Coat Provides Long Lasting Corrosion Protection Available In Textured Black Finish The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models Accommodates Recessed Hawse Fairlead For Maximize Approach Angle Constructed Of 10 Gauge Steel For Strength And Style Heavy-Duty 4 Gauge Winch Mount Center Section Features Large Winch Access Holes For Easier Operation Provides Two Recovery Points For Shackles Configured To Accept Most Single Row 20 in. Led Light Bars Available In Two Bull Bar Styles/Round And Angular Additional Attributes: GTIN: 00707742103463 Color: Textured Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 43.0000 x 22.0000 x 18.0000 inches

Pro-Series Front Bumper; w/Round Bull Bar; Textured Black; Low Profile Design Hardware And Mounting Brackets Included E-Coated Base Coat Provides Long Lasting Corrosion Protection Available In Textured Black Finish The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models Accommodates Recessed Hawse Fairlead For Maximize Approach Angle Constructed Of 10 Gauge Steel For Strength And Style Heavy-Duty 4 Gauge Winch Mount Center Section Features Large Winch Access Holes For Easier Operation Provides Two Recovery Points For Shackles Configured To Accept Most Single Row 20 in. Led Light Bars Available In Two Bull Bar Styles/Round And Angular Additional Attributes: GTIN: 00707742103470 Color: Textured Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 43.0000 x 22.0000 x 18.0000 inches

Westins Pro-Mod Front Bumper combines enhanced vehicle protection, with great looks. Pro-Mods revolutionary lightweight modular design is uniquely engineered with outrigger reinforcement brackets to provide maximum front end protection without compromising on strength, integrity or durability. The "high and tight" bumper profile creates a greater approach angle, which significantly improves off-road driving capabilities. The lightweight design also requires smaller shipping packages which dramatically reduces shipping costs. Pro-Mod bumpers feature a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements. Once you see the Pro-Mod Front Bumper, the choice becomes obvious. Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength Outrigger Brackets Support Wings Of Bumper For Maximum Strength Hardware And Mounting Brackets Included E-Coated Base Coat Provides Long Lasting Corrosion Protection Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area Has Provisions For Factory Sensors - On Some Applications 10 Gauge Steel Valance Included - On Some Applications Valance Features Laser-Cut Westin Logo Bolt On Skid Plate Available - Sold Separately Compatible For Factory Tow Hooks - On Some Applications Additional Attributes: GTIN: 00707742092477 Bumper Style: Modular Color: Textured Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 56.0000 x 16.0000 x 12.0000 inches

Westins Pro-Mod Front Bumper combines enhanced vehicle protection, with great looks. Pro-Mods revolutionary lightweight modular design is uniquely engineered with outrigger reinforcement brackets to provide maximum front end protection without compromising on strength, integrity or durability. The "high and tight" bumper profile creates a greater approach angle, which significantly improves off-road driving capabilities. The lightweight design also requires smaller shipping packages which dramatically reduces shipping costs. Pro-Mod bumpers feature a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements. Once you see the Pro-Mod Front Bumper, the choice becomes obvious. Hardware And Mounting Brackets Included E-Coated Base Coat Provides Long Lasting Corrosion Protection Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area Has Provisions For Factory Sensors - On Some Applications 10 Gauge Steel Valance Included - On Some Applications Valance Features Laser-Cut Westin Logo Bolt On Skid Plate Available - Sold Separately Compatible For Factory Tow Hooks - On Some Applications Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength Outrigger Brackets Support Wings Of Bumper For Maximum Strength Additional Attributes: GTIN: 00707742092514 WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Bumper Style: Modular Color: Textured Black Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 57.0000 x 21.0000 x 9.0000 inches

Stand out from the Competition with the all new HDX Bandit Rear Bumper from Westin. Built to compliment the style, precision, and durability of the matching HDX Bandit Front Bumper, this all new "off-road style" rear bumper, is clearly a cut above. Unlike the competition, which features an overlapping two piece design and an ugly weld which can warp the metal and is prone to rust, the new HDX Bandit Rear Bumper features an extremely clean, one piece design. The stamped diamond plate step surface is constructed of 11 gauge plate steel and features a welded inner structure for maximum strength. A unique "corner step" design provides extra wide step area to allow easy access to bed and cargo area. HDX Bandit Rear Bumper includes hardware, mounting brackets, flush mount LED license plate lights and two standard LED back up lights. Fully compatible with blind spot monitors and parking sensors, and can also accommodate an OEM hitch. HDX Bandit Rear is designed for heavy duty performance and extended life that is backed by a 3 year warranty with a black powder coat finish. The new HDX Bandit Rear Bumper is truly in a class by itself. Protects Vehicle From Damage Against Wildlife And Road Debris Custom Die Cast Riveted Logo Badge Mounting Provisions For License Plate Hardware Mounting Brackets Included Provides Added Safety To Driver And Vehicle Heavy Duty Diamond Plate Steel Honeycomb Mesh Protects Grille/Gives Maximum Airflow 1.5 in. Headlight Protection Tubes 2 in. Full Wraparound Wings Ties Into Bumper Provisions For Factory Parking Sensors 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts Compatible For Factory Fog Lamps Or LED Post Mount Lights Additional Attributes: GTIN: 00707742098882 Color: Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 79.0000 x 15.0000 x 11.0000 inches

High and Tight best describes the great looking new Pro-Series Rear Bumpers from Westin. This all new "off road style" rear bumper features a light weight, slim, one-piece design, adding a modern, aggressive look to your truck. Built to improve ground clearance and departure angles when driving in more rugged terrain. The Pro-Series Rear Bumper is fully compatible for OEM parking sensors, hitch, and blind spot monitors. It also includes two LED license plate lights and can accommodate LED back up lights (sold separately). Featuring a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements with easy bolt-on installation. Just add the original Pro-Mod Front Bumper, and your transformation from stock to custom is complete. Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Compatible For Blind Spot Monitors And Parking Sensors Accommodate For Oem Hitch And Led Back Up Lights Configured To Accept 2 Fm6 Led Flush Mount Custom Laser-Cut Westin Logo Hardware And Mounting Brackets Included Bolt-On Installation - No Drilling Required Additional Attributes: GTIN: 00707742095881 Color: Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 75.0000 x 13.0000 x 13.0000 inches

Westins Pro-Mod Front Bumper combines enhanced vehicle protection, with great looks. Pro-Mods revolutionary lightweight modular design is uniquely engineered with outrigger reinforcement brackets to provide maximum front end protection without compromising on strength, integrity or durability. The "high and tight" bumper profile creates a greater approach angle, which significantly improves off-road driving capabilities. The lightweight design also requires smaller shipping packages which dramatically reduces shipping costs. Pro-Mod bumpers feature a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements. Once you see the Pro-Mod Front Bumper, the choice becomes obvious. E-Coated Base Coat Provides Long Lasting Corrosion Protection Increases Ground Clearance And Angle Of Approach Constructed Of 10 Gauge Steel For Strength And Style Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area Has Provisions For Factory Sensors - On Some Applications 10 Gauge Steel Valance Included - On Some Applications Valance Features Laser-Cut Westin Logo Bolt On Skid Plate Available - Sold Separately Compatible For Factory Tow Hooks - On Some Applications Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength Outrigger Brackets Support Wings Of Bumper For Maximum Strength Hardware And Mounting Brackets Included Additional Attributes: GTIN: 00707742092460 Bumper Style: Modular Color: Textured Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: Package UOM: Dimension: 56.0000 x 15.0000 x 13.0000 inches PDF: 75-5841005

Westins Outlaw Rear Bumper is made of 14 gauge steel with a 2 diameter frame. It features a retractable license plate holder that hides your trucks receiver hitch and includes mount points for optional back lighting. Add one of Westins Class III/IV hitches to do the heavy-lifting and pull your weight when you need it. Our Outlaw Rear Bumper is available for vehicles that come with or without back-up sensors. Installation is bolt-on so no drilling is required. Mount kit included. Available in textured black finish. Mount Kit Included 2 In. Diameter Tube Frame Optional Class III/IV Hitch Available. Sold Separately Retractable License Plate Holder Conceals Receiver Hitch Equipped With Mount Points For Optional Auxiliary Lights Available For Vehicles With Or Without Backup Sensors Bolt-On Installation; No Drilling Required Additional Attributes: GTIN: 00707742081822 Bumper Style: Custom Color: Black WARNING CA Proposition 65 Message: Cancer and Birth Defect WARNING CA Proposition 65: Yes Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 73.0000 x 14.0000 x 13.0000 inches