ADD Offroad Ram TRX PRO Bolt-On Rear Bumper brings the same extremely low profile design of the front bumper to the rear of the truck. It was designed to flow flawlessly with the lines of your truck. Manufactured with a tubular steel frame coupled with steel & aluminum plates to provide solid protection to the rear of your truck, while still maximizing ground clearance. There are 2 rear facing cube light mounting points that are protected by the tubular frame. The bumper retains holes for the OEM parking sensors, and also leaves the OEM tow hooks intact. The side wings of the bumper leave room for the factory bed step. As always, this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ram 1500 TRX

The Stealth Fighter Front Bumper is a low-profile plate steel design. The radiused front end keeps it tight to the front of your Ram TRX while following key bodylines to make it look like it belongs from the factory. A universal light mount system allows for a 40 in. curved light bar or up to cube lights in the center of the bumper, and there are two additional cube light mounts behind each side panel. A full skid plate comes down and attaches in factory mounting locations to make sure your shock reservoirs remain protected. OEM amenities such as parking sensors and marker lights are retained. Reinforced clevis mounts provide a mounting point for 3/4 in. D-Rings. As always, this product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ram 1500 TRX

The Stealth Fighter Rear Bumper has a modern plate steel design that provides an aggressive look without being bulky. Clean lines and angles compliment the factory bodylines to give it a low-profile feel. Two rear facing cube light mounts are featured behind the panels. Parking sensor cutouts and trailer plug accommodations ensure that every OEM feature is retained. Reinforced clevis mounts provide a mounting point for 3/4 in. D-Rings, and the OEM bed step and tow hooks also remain fully functional. Cutouts along the bottom of the bumper give room to keep the factory dual exhaust. As always, this product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ram 1500 TRX

The Rock Fighter Skid Plate replaces the stock plastic OEM skid plate. Made from 3/16-inch aluminum alloy, it provides protection to the whole front underbelly of your Bronco. As always, this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

The newly redesigned Addictive Desert Designs HoneyBadger Front Bumper keeps the same rugged styling as the original but with a low-profile fitment. There is an optional top hoop, but either configuration has room to mount a radius 30 in. light bar on top of the bumper. The center of the bumper houses a straight 20 in. light bar, and two cube lights can be mounted behind the side panels. The HoneyBadger comes in hammer black powder coat with satin black panels. OEM amenities, such as parking sensors and tow hooks, are retained. Even though it is an aftermarket front bumper, the HoneyBadger follows the bodylines perfectly, making the front of your Ford F-150 look unique without sacrificing quality. As always this product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT

The newly redesigned Addictive Desert Designs HoneyBadger Front Bumper keeps the same rugged styling as the original but with a low-profile fitment. There is an optional top hoop, but either configuration has room to mount a radius 30 in. light bar on top of the bumper. The center of the bumper houses a straight 20 in. light bar, and two cube lights can be mounted behind the side panels. The HoneyBadger comes in hammer black powder coat with satin black panels. OEM amenities, such as parking sensors and tow hooks, are retained. Even though it is an aftermarket front bumper, the HoneyBadger follows the bodylines perfectly, making the front of your Ford F-150 look unique without sacrificing quality. As always this product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT

The Stealth Fighter is a plate steel bumper with a radiused front edge that keeps it tight to the truck. There is a universal light mount system in the center of the bumper that holds up to a 40 in. radius light bar or 10 cube lights. Each side panel has a mount capable of holding either a 10 in. single row light bar or a cube light. Reinforced clevis mounts provide a mounting point for 3/4 in. D-Rings, while the optional Winch mount provides even more utility. Sensor cutouts make this bumper compatible with both sensor and non-sensor trucks. As always, this bumper is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT

The Stealth Fighter rear bumper takes the same styling as the front bumper and brings it to the rear of your Ford F-150. The plate steel design gives aggressive angles while still maintaining a low-profile look. OEM amenities, such as parking sensors and factory hitch, are retained. Reinforced clevis mounts provide an option to mount 3/4 in. D-Rings, and the Stealth Fighter also comes standard with two rear facing cube light mounts. As always, this product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT

The Stealth Fighter is a plate steel bumper with a radiused front edge that keeps it tight to the truck. There is a universal light mount system in the center of the bumper that holds up to a 40 in. radius light bar or 10 cube lights. Each side panel has a mount capable of holding either a 10 in. single row light bar or a cube light. Reinforced clevis mounts provide a mounting point for 3/4 in. D-Rings, while the optional Winch mount provides even more utility. Sensor cutouts make this bumper compatible with both sensor and non-sensor trucks. As always, this bumper is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 King Ranch 2021-2023 Ford F-150 Lariat 2021-2023 Ford F-150 Limited 2021-2023 Ford F-150 Platinum 2021-2023 Ford F-150 Police Responder 2022 Ford F-150 Raptor 2021-2023 Ford F-150 SSV 2021-2023 Ford F-150 Tremor 2021-2023 Ford F-150 XL 2021-2023 Ford F-150 XLT

Our Frame Horn Gusset Kit was engineered to reinforce the Bronco & Bronco Raptor's failure prone OEM frame horn mounts. 6th gen Broncos have been known to take damage to the frame horn when using a winch or tow hooks during recovery scenarios. This kit installs to the frame horn using heavy duty grade 8 hardware. This enables you to run your stock or aftermarket front bumper's winch and other recovery points with confidence. The heavy duty 1018 steel is finished in a dual-stage hammer black powder coat, and features a fully bolt-on installation. As always, this is Made in America.This Part Fits: Year Make Model Submodel 2021 Ford Bronco Badlands 2021 Ford Bronco Base 2021 Ford Bronco Big Bend 2021 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2021 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021 Ford Bronco Wildtrak

Transform the front of your Jeep with the Addictive Desert Designs Rock Fighter front bumper. The Rock Fighter is a stubby width bumper, meaning it will look good with any aftermarket fender you want to put on your JL. The patented universal light mount system in the center of the bumper allows you to mount any brand/size of light up to a 20 in. RDS or 5 cube lights. There are two additional cube light mounts on each top corner of the bumper. The two clevis mounts on the front of the bumper accept a 3/4 in. D-Ring and are reinforced to help out in tough situations. The Rock Fighter provides a greater approach angle to maximize offroad performance and two different top hoop options for even more front-end protection. This bumper is available with a low profile top hoop or a stinger. The main bumper structure comes in hammer black powder coat with satin black panels. This product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

The Rock Fighter Bronco Rear Bumper was designed to flow seamlessly with the contours of the rear end. It's low profile, modern plate steel construction is perfect for crawling rocks on the trail. The Rock Fighter retains the OEM tire mount & backup camera, but an included relocation bracket moves the 3rd brake light further up to allow for a 37-inch spare tire to be mounted. Additionally, the bumper retains both the OEM hitch and license plate light. Two reinforced clevis mounts for soft shackles provide recovery options if you find yourself in a tight spot. The Rock Fighter Rear Bumper not only provides you with improved off-road performance, but brings a more aggressive styling than the factory plastic bumpers. As always, this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

The Stealth Fighter Bronco Front Skid Plate replaces the stock plastic OEM skid plate. Manufactured from 3/16-inch aluminum alloy, it protects the front underbelly of your Bronco in a way that plastic cannot. As always, this skid is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

For those who are looking for a sleek, low-profile front bumper for their 2021 Bronco, the Stealth Fighter hits the mark. Designed for performance and clearance off-road, it also brings bold styling to the front end. At the center of the bumper are inset mounting points for up to a 30-inch radius light bar, or 8 cube lights. Towards the ends of the bumper are 2 additional inset mounting points, that can take a cube light each. This design retains the OEM parking sensors, and we include plugs if your model does not have sensors. Our adaptive cruise control relocation bracket is available as well.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper. The Bomber Raptor Front Bumper is offered with three lighting options: 4 Rigid 360 6-inch light mounts, 3 Baja Designs LP6 light mounts, or two 20-inch light bar mounts. Additionally, there are cube light mounts on each wing of the bumper to provide supplemental lighting options. The Bomber retains both the OEM tow hooks as well as the OEM parking sensors. As always, this bumper is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper. The Bomber Raptor Front Bumper is offered with three lighting options: 4 Rigid 360 6-inch light mounts, 3 Baja Designs LP6 light mounts, or two 20-inch light bar mounts. Additionally, there are cube light mounts on each wing of the bumper to provide supplemental lighting options. The Bomber retains both the OEM tow hooks as well as the OEM parking sensors. As always, this bumper is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The Addictive Desert Designs Bomber rear bumper features a clean, modern look. The plate steel construction offers strength, while remaining low profile. The angles meet perfectly with the body lines of the vehicle to make it look as though it was there from the factory. Give your Ford Raptor additional lighting with the two standard rear facing cube light mounts. Factory amenities such as parking sensors, tow hitch, and dual exhaust are all retained. As always, this product is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

The Stealth Fighter has been our most popular line of bumpers, and for good reason. It is one of our tightest fitting bumpers and is synonymous with the Raptor in the off-road community. This was designed to closely follow the Raptor's body lines, and provides better ground clearance and approach angle than the OEM bumper. The front of the bumper sticks out only 1/2-inch further than the OEM bumper in order to fit LED lights within. The center light mount can accommodate either a 40-inch radius LED light bar, or up to 10 LED cube lights. There are 2 side mounts for Rigid 10-inch SR LED light bars on either side of the bumper for additional lighting. These mounts sit behind satin black aluminum panels with vented slots, so if you decide to not mount any side lights there are no empty holes in the bumper.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

Our Stealth Fighter Front Bumper brings an aggressive style that complements the factory style, and brings additional utility to your truck. The bumper follows the factory body lines with the tightest of tolerances. At the center of the bumper is a light mount that can take a 40-inch radius light bar, or 10 individual 3-inch cube lights. Each wing of the bumper can also mount a 3-inch light pod for even more lighting. An optional extreme duty hidden winch mount is also available. Additional recovery options are provided by 1-inch thick clevis mounts that take ¾-inch D-rings. The satin black skid plate provides protection beneath the front end, and is easily removable if desired. The Stealth Fighter is compatible with adaptive cruise control & retains full functionality of the parking sensors. Finished in a durable hammer black powder coat, this bumper is fully bolt-on and made in the USA from American steel.This Part Fits: Year Make Model Submodel 2022-2024 Chevrolet Silverado 1500 ZR2

This Winch Kit was designed exclusively for our Stealth Fighter front bumper. The recessed winch mount is equipped for heavy duty use, and can accommodate our standard winch options up through the Warn Zeon series. It's positioned out of sight within the bumper, keeping your front end looking clean and streamlined. It's finished in a durable hammer black powder coat, and installs easily with the provided hardware. As always, this is made in the USA from American Steel. * Please Note: This is NOT compatible with Diesel models.This Part Fits: Year Make Model Submodel 2022-2024 Chevrolet Silverado 1500 ZR2

Our Stealth Fighter Rear Bumper features a modern plate steel design that brings additional utility and compliments the factory style. Two 3-inch cube light mounts framed by satin black aluminum accent panels offer rear supplemental lighting options. The top of the bumper has an aluminum step plate for better foot grip. Access to the spare tire and the OEM parking sensors & blind spot monitors are incorporated in the bumper's design. The Stealth Fighter is finished in a durable 2-stage hammer black powder coat. No drilling or modifications are required for installation. As always, this is Made in the USA from American steel. * Please Note: This is not compatible with Super Cruise equipped vehicles.This Part Fits: Year Make Model Submodel 2022-2024 Chevrolet Silverado 1500 Custom 2022-2024 Chevrolet Silverado 1500 Custom Trail Boss 2022-2024 Chevrolet Silverado 1500 High Country 2022-2024 Chevrolet Silverado 1500 LT 2022-2024 Chevrolet Silverado 1500 LT Trail Boss 2022-2024 Chevrolet Silverado 1500 LTZ 2023-2024 Chevrolet Silverado 1500 PPV 2022-2024 Chevrolet Silverado 1500 RST 2022-2025 Chevrolet Silverado 1500 WT 2022-2024 Chevrolet Silverado 1500 ZR2 2022-2025 GMC Sierra 1500 AT4 2022-2024 GMC Sierra 1500 AT4X 2022-2024 GMC Sierra 1500 Denali 2022-2024 GMC Sierra 1500 Denali Ultimate 2022-2024 GMC Sierra 1500 Elevation 2022-2024 GMC Sierra 1500 Pro 2022-2024 GMC Sierra 1500 SLE 2022-2024 GMC Sierra 1500 SLT

The Phantom Series Front Bumper was engineered with a low-profile, knife's edge design, giving your rig an even more aggressive stance than factory. At the center of the bumper is an inset mounting point for a 20-inch Radius LED Light Bar. Alternatively, (5) 3-inch Light Pods can be mounted at this same location. We include a heavy duty 3/16-inch aluminum front skid plate, which replaces the incompatible factory skid. The skid plate and accent panels are finished in a satin black powder coat, while the bumper is finished in a durable hammer black powder coat. The Phantom retains OEM features such as the parking sensors & adaptive cruise control (ACC Relocation Bracket is required.) Provisions for adding frame mounted recovery points are included in the design. As always, this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2022-2024 Ford Bronco Raptor

The Stealth Fighter Raptor Rear Bumper for 2021-2023 models was designed to be one of our slimmest fitting bumpers, that follows the body lines of your Raptor and complements the factory dovetail style. Constructed from modern radius plate steel, it has recessed, satin black powder coated aluminum panels to cut down on weight. Behind these two panels are mounting points for rear facing LED cube lights for supplemental lighting when working out of the bed of your truck in low-light conditions. The Stealth Fighter measures the same length from your tailgate, and provides superior protection over the factory rear bumper. This bumper's design retains the OEM tow hitch, tow hooks, and dual exhaust. Sensor cut-outs allow you to retain the full functionality of your factory parking sensors. Two integrated license plate lights are included with the bumper. As always, this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

If you're like us, you want your Raptor to be able to go anywhere and do anything. That's why we offer the 3rd Gen Ford Raptor Stealth Fighter Front Bumper Winch Kit. This kit enables your Raptor to accommodate a winch, so you can be prepared for anything when you're out on the trail. The winch mount bolts directly to the truck's frame to ensure maximum strength when in use, and is concealed behind the winch plate to keep the front end looking clean. The oil cooler is safely relocated to make room for the winch, and the included skid plate provides protection on the trail. This kit is for those who want to have recovery options when running off-road, in case you or a buddy manage to get stuck. As always, this is fully bolt-on and made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford F-150 Raptor

Addictive Desert Designs 2022+ Toyota Tundra Stealth Center Mount Front Bumper w/ Top Hoop

The Bomber Front Bumper brings a unique and aggressive style to the front end of your Super Duty. At the center of the bumper are 3 flush mounting points for Baja Designs LP6 round lights. On each wing is a mounting point for a single 3-inch pod light, such as Baja Squadron cube lights. These options provide ample lighting while on- or off-road. OEM features like the parking sensors are retained after installing the Bomber. Recovery options include 1-inch thick clevis mounts that take 3/4-inch D-ring tow shackles (7/8-inch pins.) An included 3/16-inch aluminum bumper skid plate provides additional protection and style to the front end of your F-250/350. The Bomber Front Bumper is finished in a Hammer Black powder coat, is fully bolt-on, and like always; Made in America.This Part Fits: Year Make Model Submodel 2023-2024 Ford F-250 Super Duty King Ranch 2023-2024 Ford F-250 Super Duty Lariat 2023-2024 Ford F-250 Super Duty Limited 2023-2024 Ford F-250 Super Duty Platinum 2023-2024 Ford F-250 Super Duty XL 2023-2024 Ford F-250 Super Duty XLT 2023-2024 Ford F-350 Super Duty King Ranch 2023-2024 Ford F-350 Super Duty Lariat 2023-2024 Ford F-350 Super Duty Limited 2023-2024 Ford F-350 Super Duty Platinum 2023-2024 Ford F-350 Super Duty XL 2023-2024 Ford F-350 Super Duty XLT

Addictive Desert Designs 2023+ Ford Super Duty Honeybadger Front Bumper

The 4th Gen Tacoma Skid Plate is specifically designed for our Stealth Center Mount Winch Front Bumper. The plate protects your trucks front undercarriage. Installation is straightforward due to the plate's bolt-on no cutting required design. Constructed with durable lightweight 3/16-inch aluminum. Finished with a satin black powder coat. Designed and made in America. *Please Note: Skid plate is only compatible with the Stealth Center Mount Winch Front BumperThis Part Fits: Year Make Model Submodel 2024 Toyota Tacoma TRD Pro

The Stealth Series 4th Gen Tacoma Center Mount Winch Front Bumper provides added durability and recovery options. A universal mount for a single row 20-inch light bar in the center of the bumper gives you additional lighting options. Our bumper retains the OEM sensors, fog lights, and front camera view, while remaining compatible with adaptive cruise control. Manufactured out of steel and finished with a hammer black powder coat. Dual Clevis D-ring mounts and a center winch mount provide you with full recovery options. Enhance your underbody protection by adding our Skid Plate for the Stealth Center Mount Front Bumper. Designed and made in America. *Please Note: Bumper is not compatible with the TRD Pro Trim Line. It is also not compatible with the factory skid plate. **Please Note: Minimal trimming is required for installation.This Part Fits: Year Make Model Submodel 2024 Toyota Tacoma TRD Pro

The Stealth Series 4th Gen Tacoma Rear Bumper provides you with added protection from obstacles. The steel construction offers a solid barrier between your truck and the outdoors.The hammer black and satin black powder coat provide a streamlined look. Upgrade your rear lighting by attaching a pair of cube lights on the bumper's side wings. The bumper retains all factory rear sensors and doesn't obstruct your back-up camera view. Pair the rear bumper with the Stealth Center Mount Winch Front Bumper. Manufactured and designed in the USA.This Part Fits: Year Make Model Submodel 2024 Toyota Tacoma Limited 2024 Toyota Tacoma SR 2024 Toyota Tacoma SR5 2024 Toyota Tacoma Trailhunter 2024 Toyota Tacoma TRD Off-Road 2024 Toyota Tacoma TRD PreRunner 2024 Toyota Tacoma TRD Pro 2024 Toyota Tacoma TRD Sport

Addictive Desert Designs 2025 Ram RHO Phantom Front Bumper

Addictive Desert Designs 2025 Ram RHO Stealth Fighter Front Bumper Winch Kit

Addictive Desert Designs 2025 Ram RHO Stealth Fighter Rear Bumper

Addictive Desert Designs 2025+ Ram RHO Bomber Front Bumper - 3 Baja Designs LP6

The Bomber is a tight fitting front bumper for the new Bronco, that follows the contours of the body perfectly. At the center of the bumper is a satin black aluminum panel that frames 3 mounting points for Baja Designs LP4 lights (also available with Rigid Lighting.) At the sides of the bumper are mounting points for cube lights, framed by satin black aluminum panels. The Bomber is constructed from modern plate steel, and finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat. The approach angle of the Bomber is improved over the factory bumper, and it also provides higher clearance. The OEM parking sensors are incorporated into the design of the bumper. There are 2 heavily reinforced clevis mounts that accept soft shackles for recovery options. We offer an optional 3/16-inch vented aluminum skid plate that provides superior protection over the factory plastic skid plate. An Adaptive Cruise Control Relocation Bracket is also available, which allows you to retain full functionality of the feature. As always, this is fully bolt-on and Made in America.This Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak