All

TechFloorTM tiles are custom engineered utilizing a loop and tab attaching system to tightly lock tiles together and create a seamless look. Each tile has 2 connecting edges with loops, and 2 connecting edges with tabs. They quickly attach to each other by laying the tab of one tile over the loop of the next, and snapping them down into place.

Chemical Guys Collapsible Detailing Caddy - Single

Clevite Plastigage is designed as a final check of total vertical oil clearance during reassembly. This does not replace properly measuring crankshaft journals, housing bores, or bearing dimensions before engine reassembly with accurate micrometers and gauges.

Fox Spanner Wrench (2.5 Preload)

Available In Several Lengths. Bottom Drawers with Organizers. Made of .063 in Thick Aluminum Diamond Tread. Secure Stainless Steel Folding / Locking T Handles. Weather Resistant Rain Gutter Design. Full Rubber Seal.Installation InstructionsInstallation Instructions

Available In Several Lengths. Bottom Drawers with Organizers. Made of .063 in Thick Aluminum Diamond Tread. Secure Stainless Steel Folding / Locking T Handles. Weather Resistant Rain Gutter Design. Full Rubber Seal.Installation InstructionsInstallation Instructions

Designed for Flat / Stake Beds with a reinforced top shelf to carry the load. Bottom drawers with organizers and heavy duty gas shocks on a flip up door. It is made of .063 in. thick aluminum diamond tread. Secure stainless folding locking T handles; weather resistant rain gutter design with a full rubber sealInstallation Instructions

Brute Goose Neck Tailgate Tool Boxes are heavy duty aluminum boxes that mount at the tailgate of your truck. With 2 recessed swing door compartments, it provides easy access to all compartments. Features stainless steel folding/locking T-handles and a slide drawer capacity up to 100 lbs. Available in polished aluminum and black powder coated aluminum. Made in USA.

Westin(R) Automotive is an aftermarket product manufacturer and parent company of brands including FEY(TM), Wade(TM), Brute(TM), HDX(TM), and Snyper Westin Offroad products. Westin designs and delivers automotive products that give you the look and function you need to fit your active lifestyle. When you choose Westin(R), you roll with style. Westin Automotive products are proudly designed, tested and engineered in San Dimas, California, USA. Innovation, passion and consistency have made Westin one of the industry's leading manufacturers for nearly 40 years. Our diverse range of products is backed by a superior manufacturer warranty. When it comes to your vehicle, Westin is the name you can trust.Installation Instructions

When your vehicle's throttle isn't what you need, it's time for a boost with the Bully Dog Thruster. This device is easy to install inline between your vehicle's pedal position sensor and the vehicle harness. Adjust on the fly and really feel the change as you drive. It's ideal for off-road vehicles with its waterproof design, but it will give your vehicle just the boost it needs.Installation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 2003-2009 Toyota 4Runner Limited 2003-2009 Toyota 4Runner Sport 2003-2009 Toyota 4Runner SR5 2007-2014 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition 2005-2015 Toyota Tacoma Base 2016-2022 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2022 Toyota Tacoma SR 2016-2022 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2022 Toyota Tacoma TRD Off-Road 2015,2017-2022 Toyota Tacoma TRD Pro 2016-2022 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

Bully Dog BDX Magnetic Suction Cup Windshield MountWarranty

Stop scratching up your trim while using the wrong tools for trim removal. An effective trim-specific tool kit will save you time and prevent damage to your exterior/interior trim panels during removal. Mishimoto’s trim removal tool set includes 11 unique tools to remove any piece of interior/exterior trim on your vehicle. Our tools are constructed from durable impact-resistant nylon, which resists bending and prevents marring of the trim surface. In addition, our kit is encased in a cloth pouch for organization and easy transportation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.

Whether you’re bending an emergency replacement brake line or putting together all new fuel lines for your project car, having an efficient and easy-to-use tube bender can make all the difference. Mishimoto’s 3-in-1 tube bending tool is all you’ll need to properly bend 1/4”, 5/16”, and 3/8” tubing. This tool works perfectly with copper, brass, aluminum, and thin-walled steel tubing. The proven design of this tube bender allows it to produce perfectly smooth bends up to 180 degrees without distorting, scratching, or crimping the tube. The knurled handle ends provide additional grip, and etched angle/bend identifiers make this tool extremely easy to use. In addition, this tool features a durable cast aluminum construction and our signature Mishimoto Lifetime Warranty.

Often overlooked, a pick, hook, and scraper set is convenient, serves a variety of functions, and should have a space in everyone’s toolbox. Mishimoto’s Pick and Hook Set includes six different hooks, two straight picks, and one gasket scraper. We’ve found a ton of uses for this kit over the years, including removing gaskets, springs, O-rings, seals, wiring clips, stuck hoses, and various other hard-to-access components. Our kit is constructed using drop-forged, heat-treated steel shafts, which provide optimal strength and bend resistance. Our ergonomic handles are comfortable and provide ample grip, ensuring they aren’t dropped into the depths of a dark, mysterious engine bay. Our kit includes both long and short pick/hook sets for use on various components in varying situations and spaces. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.

Take the stress out of hose maintenance with the Mishimoto Remote-Action Hose Clamp Tool. This tool lets you remove clamps in every nook and cranny of your engine bay thanks to a 24? flexible cable and low-profile, spring-loaded pliers. Our Remote-Action Hose Clamp Tool is powder coated in black with rubber-coated handles for a secure and comfortable grip. Like all our products, the Mishimoto Remote-Action Hose Clamp Tool is covered by our Mishimoto Lifetime Warranty for a lifetime of service.

Modern cars use a variety of plastic clips to hold numerous panels and small components in place. Trying to remove these clips with the wrong tools can cause damage to the panels and/or clips. Having a dedicated panel clip removal tool can save you time and frustration by providing a safe and efficient method for clip removal. Mishimoto’s Panel Clip Pliers are a great addition to your toolbox and are ideal for removing tree retainer clips, push retainer clips, and door panel retainer clips. These clips can be found on body panels, under the hood of your vehicle, and in numerous locations on the interior of your vehicle. Our Panel Clip Pliers feature a durable steel construction with rubber coated handles for superior grip. Mishimoto Panel Clip Pliers low-profile head design allows for use in confined areas and removes even the toughest to access clips. As with all our products, these Panel Clip Pliers include our signature Mishimoto Lifetime Warranty.

Stubborn and hard-to-reach oil filters are no match for this Mishimoto claw-style oil filter wrench. This oil filter wrench attaches to any 3/8" ratchet or breaker bar to make removing oil filters easy, even in tight spaces. The self-adjusting legs are made from heavy-duty steel and feature rubberized pads to grip oil filters from 2-1/2" to 3-7/8". That versatility means you only need to keep one wrench in your toolbox for all of your vehicles. Like all of our tools, this claw-style oil filter wrench is backed by our Mishimoto Lifetime Warranty for a lifetime of service.

Filling your vehicle with fluids can be messy business, especially if you don’t have the perfect funnel for the job. Our new Mishimoto No-Spill Coolant Funnell Kit ensures an easy, spill-free fluid fill even in the tightest engine bays. Our kit includes 4 cap adapters and 5 radiator fill neck adapters for use on most passenger vehicles and light-duty trucks. In addition, our kit includes 3 different funnel extensions, providing greater versatility in tough to reach areas. Using a clear funnel and effective fluid stopper, this kit offers full control over fluid filling. The adjustable height enhances air removal from fluid systems, improving performance and efficiency. This kit is applicable for all automotive fluids. The durable plastic funnel resists chemical degradation, providing years of reliable service. All components pack neatly within the funnel for compact storage. As with all our products, this No-Spill Funnell Kit includes our signature Mishimoto Lifetime Warranty.

Protect your wheels with Mishimoto’s new 5-Piece Non-Marring ½” Wheel Nut Socket Set! If you’ve invested a lot into your vehicle’s wheels, it makes sense to ensure the finish is protected during wheel removal and installation. Our new non-marring wheel nut socket set includes a complete set of standard metric wheel nut sizes from 15mm to 22mm. The core of our sockets is impact-grade Chromoly steel which provides superior strength for high torque applications. These sockets are applicable with ½” hand tools or electric/pneumatic impact tools. These sockets also feature a hollow core design which allows for use on vehicles with extended studs. In addition, we’ve designed this set with 6-point ends, ensuring precise engagement and reduced slip during torquing. Mishimoto wheel nut sockets feature color-coded and laser-etched sizing to make identification easy. This kit is packaged with a small carrying case ensuring easy storage and transportation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.

Removing coolant and vacuum hoses can be tricky after years of heat and clamping pressure. Picks or screwdrivers can stretch or tear the hose, causing leaks. Instead of struggling with the wrong tool, make the job easy with these Mishimoto Hose Removal Pliers. These pliers apply even pressure around the hose to push it off the barb without damage. The durable steel jaws are strong enough to remove hoses 5/32" to 1/2" while the rubberized grips provide a comfortable and secure grip. Like all Mishimoto tools, these Mishimoto Hose Removal Pliers are backed by our Mishimoto Lifetime Warranty.

Pressed-on harmonic balancers are the bane of many mechanics’ existence. Trying to pry a harmonic balancer off with a screwdriver or prybar in a cramped engine bay can be a nightmare, but with the right tool, it becomes a dream. The Mishimoto harmonic balancer puller set makes removing pressed-on harmonic balancers easy with just a ratchet or wrench. The three steel jaws lock around spoke-style balancers and the center forcing screw evenly pulls the balancer off the crank in no time. The center forcing screw features a 3/4" external hex as well as a 3/8” internal square drive for use with a ratchet or breaker bar. Four center rod lengths make this harmonic balancer puller versatile for many makes and models, and the durable blow-molded case makes it easy to take from job to job. So, if you’d like to avoid the nightmare of removing pressed-on harmonic balancers, get a Mishimoto harmonic balancer puller set, and make the job a dream.

Not having the correct tools can make even the simplest job a nightmare. Cutting silicone coolant hoses or catch can hoses with a knife is a pain and makes a mess of your hoses. Your cuts almost never come out straight. If your knife isn’t perfectly sharp, it will pull on the embedded braiding, leaving it weak. Finally, if you leave any flaps of material hanging off, or slip when cutting, you risk future tears. The best method for cutting hoses or lines straight and clean is with a tool made specifically for the job – a tool like this Mishimoto ratcheting pipe and hose cutter.----This ratcheting hose cutter makes short and tidy work of cutting plastic pipes, silicone hoses, or rubber lines for fuel systems, catch cans or vacuum systems. Our carbon-steel blade smoothly slices through lines and pipes, leaving a straight, flat, and burr-free cut that won’t tear or fail down the road. The ratcheting mechanism makes cutting even the thickest line easy and safe, while the single-finger release mechanism makes repeat cuts fast. The Mishimoto ratcheting pipe and hose cutter cuts hoses or plastic pipes up to 2.5 inches and is suitable for PCV pipe, silicone hoses, and rubber/polymer lines. Like all our Mishimoto tools, this ratcheting hose cutter is backed by our Mishimoto Lifetime Warranty.

Never again struggle to remove a hose or hose clamp with this 9-piece hose removal tool set. This set includes every tool you may need to remove the most common hose clamps and the hoses they secure. Whether it?s a spring clamp, worm gear clamp, ear clamp, or the hose itself, this kit has you covered. Durable steel construction stands up to heavy use while the rubberized grips ensure comfort. This kit includes a durable heavy-duty plastic case and Mishimoto Lifetime Warranty to protect your hose removal tool set for as long as you own it.

We work with many fluid systems here at Mishimoto, and over the years, we’ve learned to appreciate the tools that make our jobs easier. One tool that quickly came to mind was our Hose Pinch-Off Plier Set, which we are now offering to our customers. These pliers are a fantastic way to save time when dealing with systems containing fluid. The unique design of these pinch-off pliers allows you to temporarily close off flexible hoses, leaving your hands free to make necessary repairs. Applicable lines include fuel hoses, brake hoses, power steering hoses, and coolant hoses. Our Hose Pinch-Off Plier Set is constructed from a lightweight yet durable nylon-reinforced plastic. This ensures the clamp will block fluid flow entirely but will not damage or puncture the hose. In addition, our unique slide-locking design is effortless to use and securely clamps hoses from 1/8” up to 2 1/2”. Our plier set is built to last from high-quality materials and includes our signature Mishimoto Lifetime Warranty.

Wheel bearings are crucial components in your vehicle’s drivetrain. We’ve all seen videos of wheels flying off on the highway – many of those videos can be attributed to failed wheel bearings. Wheel bearing service can be intimidating for many enthusiasts, but it doesn’t have to be. Having the right tools on hand can boost your confidence and make the daunting task of replacing your wheel bearings a breeze.----This Mishimoto front wheel drive bearing service kit includes everything you need to remove and replace your press-in wheel bearings without removing the steering knuckle from the vehicle. This eliminates the need for an alignment after replacing the wheel bearings. In the high-quality blow-molded case you’ll find nine carbon steel drifts, adapter sleeve, two receiver sleeves, six hub-removal screws for hubs with M12x1.5 and M14x1.5 lug threads, and a high-quality center screw to make easy work of bearings on almost any car, van, or light truck. So, if you’ve been avoiding replacing your wheel bearings because you haven’t had the right tool, get this Mishimoto front wheel drive bearing service kit and don’t put off this essential job any longer.

The fins on your Mishimoto performance radiator, oil cooler, transmission cooler, or intercooler were meticulously engineered to provide the most efficient cooling possible. But, over time, bent fins can rob your cooler of airflow, efficiency, and good looks.Restore your cooler's performance and aesthetics with this 6-in-1 fin straightener tool. This tool allows you to quickly and easily realign bent fins and return your cooler to its former glory. The Mishimoto 6-in-1 fin straightener tool features combs for most common fin spacings, including 8, 9, 10, 12, 14, and 15 fins-per-inch. Like all Mishimoto tools, this fin straightener tool is backed by our Mishimoto Lifetime Warranty for a lifetime of service.

Save yourself time and frustration when removing your BMW clutch fan with this Mishimoto fan clutch removal tool set. This 32mm long-reach wrench and water pump pulley holding tool make replacing your BMW water pump or fan clutch a fast and easy job. Simply fasten the holding tool to the water pump with the stock pulley bolts and use the 32mm wrench to loosen the fan nut -easy. This tool set works with most BMW 4, 6, and 8-cylinder engines and is made from durable steel for a long service life. Like all Mishimoto tools, this BMW fan clutch removal tool set is backed by our Mishimoto Lifetime Warranty.

Removal and installation of high-pressure injector lines on the 6.7L Powerstroke is not an easy process. Using standard tools is an easy way to strip or damage components and limits the ability to retorque the lines correctly. However, Mishimoto has a solution with our Diesel Injector Line Socket Set, designed explicitly for the Ford 6.7L Powerstroke. Our sockets feature 17mm 12-point heads to provide high-grip on the line connections and reduce the chance for slippage when used at varying angles. Internal stops on the socket maintain appropriate height on the lines. Our sockets are constructed from robust, thick steel to reduce flex during the torquing process. As with all our 6.7L Powerstroke Products, this socket set includes our signature Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2011-2022 Ford F-250 Super Duty King Ranch 2011-2022 Ford F-250 Super Duty Lariat 2018-2022 Ford F-250 Super Duty Limited 2013-2022 Ford F-250 Super Duty Platinum 2011-2022 Ford F-250 Super Duty XL 2011-2022 Ford F-250 Super Duty XLT 2011-2022 Ford F-350 Super Duty King Ranch 2011-2022 Ford F-350 Super Duty Lariat 2018-2022 Ford F-350 Super Duty Limited 2013-2022 Ford F-350 Super Duty Platinum 2011-2022 Ford F-350 Super Duty XL 2011-2022 Ford F-350 Super Duty XLT

Preparing metal lines for fitting ends and assembly can be a gratifying process when completed properly. However, if you don’t have an effective flaring kit, this task can quickly turn from enjoyable to daunting. Mishimoto has you covered with our all-new Double Flaring Tool Kit, an item every enthusiast should have within their collection. Our Double Flaring Tool Kit includes everything you need to create precision 45-degree single or double flares for fuel lines, brake lines, and transmission lines. This kit includes flare dies for standard line sizes from 3/16” up to 5/8”. Proper preparation of the line before flaring is key to ensuring a proper sealing joint. Therefore, we include a precise cutting tool for tubing from 1/8” up to 1 1/8” within this kit. This tool also features an integrated reamer to clean the internal surface of the tube. The included flaring bar provides holes for the applicable lines and flare dies. Precision machining within the holes ensures adequate grip with the lines during the flaring process. The chrome-plated swivel joints within the flaring bar provide reduced friction during torquing of the bar. The Mishimoto Double Flaring Tool Kit includes a durable carrying case to organize included components and provide portability. In addition, this kit includes our signature Mishimoto Lifetime Warranty, ensuring a lifetime of dependable service.

If you've got a paddock of project cars, a fleet of work vehicles, or just like to help all of your friends with their daily drivers, you need tools that help you get maintenance done fast. This Mishimoto 28-piece cooling system pressure tester and vacuum refill tool kit lets you diagnose and fix cooling system issues quickly so you can get back on the road or track faster. Once you've found and fixed your leak, use the vacuum purge and refill tools to fill the cooling system and avoid hours of waiting for the air to bubble out on its own.This 28-piece kit includes 17 color-coded adapters and 3 test caps to fit almost every vehicle, as well as adapters for testing many common radiator caps. This tool kit is packaged in a durable plastic case that keeps your tools safe and organized and is backed by our Mishimoto Lifetime Warranty for a lifetime of service.

If you've got a paddock of project cars, a fleet of work vehicles, or just like to help all your friends with their daily drivers, you need tools that help you get maintenance done fast. This Mishimoto 14-piece aluminum cooling system pressure tester kit lets you diagnose and fix cooling system issues quickly so you can get back on the road or track faster.----This 14-piece kit includes 8 color-coded aluminum adapters and 4 test caps to fit almost every vehicle. This tool kit is packaged in a durable plastic case that keeps your tools safe and organized and is backed by our Mishimoto Lifetime Warranty for a lifetime of service.

There's nothing fun about spilling coolant all over your engine bay and driveway or waiting in the cold for your engine to warm up while you bleed air from the cooling system. That's why Mishimoto wants to help you avoid all of that and fill your cooling system in two easy steps. With this coolant vacuum purge and refill tool kit, you can simply connect the tool to a compressor, pull a vacuum on your cooling system, then open the valve and fill. No air to bleed out and no sitting in the cold while you wait for your engine to get up to temp. The Mishimoto Coolant Vacuum Purge and Refill Tool Kit includes a universal compression-style adapter and collars to fit most coolant tanks or radiators and comes packed in a convenient carrying case. Like all Mishimoto tools, this coolant vacuum purge and refill tool kit is backed by our Mishimoto Lifetime Warranty for a lifetime of service.

One of the worst parts of assembling PTFE (Teflon) AN line is getting stabbed by the steel braid as you try to pry it back and install the olive or ferule. If you’ve ever caught a piece of steel braid under your thumbnail, you know how awful this can be. Luckily, Mishimoto has the right tool to make peeling the braid back easy, saving time and your fingertips.----This Mishimoto AN line braid spreader allows you to quickly and easily open the braid on AN line sizes from -3 to -8AN without risk of piercing the inner lining, or your fingers. This tool can also be used to reshape the PTFE inner liner if it’s out of round from cutting, as well as push the ferule or olive onto the inner liner, making hose assembly fast and easy.----The Mishimoto AN line braid spreader features a lightweight anodized aluminum body to prevent fatigue while assembling multiple lines. The hollow body can also be used to store additional ferules/olives for future use. The polished stainless-steel insert reduces friction and won’t scratch ferules or PTFE lining. Like all Mishimoto tools, this -3 to -8AN line braid spreader tool is backed by our Mishimoto Lifetime Warranty.

Wiseco 88.0mm Black Anodized Piston Ring Compressor Sleeve

Wiseco 84.5mm Black Anodized Piston Ring Compressor Sleeve

Wiseco 84.0mm Black Anodized Piston Ring Compressor Sleeve