All

Omix proudly offers high-quality replacement parts so that you can keep your part of the Jeep heritage on the road- parts that always meet or exceed manufacturer?s specs for quality you can trust. This replacement hex flange nut fits 07-18 Wrangler JK/JKU, 18-19 Wrangler JL / JLU and 20 Gladiator JT models. Hex flange nut is used on the frame end of both front and rear track bars, on the axle end of rear lower control arms and on both ends of the front lower control arms. Nut features M14 x 1.50 threads. Sold individually. Replaces OE 06104719AA 2007-2018 JEEP WRANGLER JK, 2018-2019 JEEP WRANGLER JL, AND 2020 JEEP GLADIATOR JT REPLACEMENT HEX FLANGE NUT ? used for suspension track bar and control arm mounting FEATURES CORRECT M14 x 1.50 THREADS as a DIRECT REPLACEMENT for the original QUALITY YOU CAN TRUST ? Omix has established themselves as the leading supplier of replacement parts for all Jeep / Willys vehicles, with quality standards that always meet or exceed those of the original factory part. DIRECT REPLACEMENT for OE Part 6104719AA Every OMIX part is backed by an industry-leading 5-Year Limited Warranty Additional Attributes: GTIN: 00804314324964 Add-On: N/A Freight Fee: No Freight Item: No Hardware Included: Yes Install Time: 1+ Hours Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 3 x 3 x 0.1 inches

Omix offers a wide selection of steering and suspension components to keep your Jeep safely on the road with quality that always meets or exceeds that of the original. This replacement front track bar fits 99-04 Grand Cherokee WJ models. Non-adjustable. Replaces OE 52088305AB Steel OE style Direct Fit Limited 5 Year Warranty Additional Attributes: GTIN: 00804314138325 Attribute: Steel Freight Item: No Install Time: 1+ Hours Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 36 x 4 x 4 inches Videos:

Omix proudly offers a vast collection of OE quality replacement parts for Jeep & Willys vehicles to help keep the Jeep legend alive. This replacement REAR track bar fits 87-95 Wrangler YJ models. OE style with pre-pressed rubber bushings. Replaces OE 52040404 Rear OE style Direct fit Limited 5 Year Warranty Additional Attributes: GTIN: 00804314052485 Attribute: Rear Freight Item: No Install Time: 1+ Hours Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 36 x 2 x 1.5 inches Videos:

Omix proudly offers a vast collection of OE quality replacement parts for Jeep & Willys vehicles to help keep the Jeep legend alive. This replacement FRONT track bar fits 87-95 Wrangler YJ models. Bar is 27.75-inches overall length, 26-inches center to center and 1.25-inches OD. Replaces OE 52040403 Limited 5 Year Warranty Rear OE style Direct fit Additional Attributes: GTIN: 00804314052478 Attribute: Rear Freight Item: No Install Time: 1+ Hours Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 36 x 4 x 4 inches Videos:

Omix proudly offers high-quality replacement parts so that you can keep you part of the Jeep heritage on the road- parts that always meet or exceed manufacturer's specs for quality you can trust. This replacement Front Track Bar fits the front of 07-18 Wrangler JK / JKU models. This OEM-style track bar is used to properly position the front differential and is an ideal replacement for a bent or damaged original. For track bar bolt, use 17258.21. For track bar nut, use 17258.22. Replaces OE 52059982AG Additional Attributes: GTIN: 00804314327378 Add-on: N/A Freight Item: No Hardware Included: No Install Time: less than 1 hour Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 34.5 x 5 x 1.625 inches Videos:

Omix offers a wide selection of steering and suspension components to keep your Jeep safely on the road with quality that always meets or exceeds that of the original. This replacement front track bar fits 91-01 Cherokee XJ, 93-98 Grand Cherokee ZJ and 97-06 Wrangler TJ models. Non-adjustable. Replaces OE 52007118 Steel OE style Direct Fit Limited 5 Year Warranty Additional Attributes: GTIN: 00804314051433 Attribute: Steel Freight Item: No Install Time: 1+ Hours Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Announced Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 37 x 6 x 5 inches Videos:

Omix offers a wide selection of steering and suspension components to keep your Jeep safely on the road with quality that always meets or exceeds that of the original. This replacement front track bar fits 84-90 Cherokee XJ models. Non-adjustable. Replaces OE 52003918 Steel OE style Direct Fit Limited 5 Year Warranty Additional Attributes: GTIN: 00804314050900 Attribute: Steel Freight Item: No Install Time: 1+ Hours Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 36 x 4 x 4 inches Videos:

If you're looking for your lifted truck to drive straighter, improve tire wear and exhibit less steering "wander," the Sinister Diesel 1994-2002 Dodge Cummins adjustable track bar kit is what you're looking for. This kit accommodates four-inch lifts (even more if used with a drop bracket), and it helps to eliminate the "Death Wobble" that is sometimes experienced from lifted trucks., The Sinister Diesel 1994-2002 Dodge Cummins adjustable track bar kit is precision manufactured from high-strength forged bars for unparalleled durability, and the Heavy Duty polyurethane bushings ensure long-lasting quality. In addition to improving tire wear, adding this adjustable track bar improves overall steering feel and straightens your truck's tracking on the road. This kit includes all of the hardware necessary for installation, and it is easily adjustable once installed on your truck., Includes:.Sinister Diesel Adjustable Track Bar, All hardware necessary for installation Construction - Forged Steel bar and Heavy Duty Polyurethane Bushings, Product Design - Easily adjustable while installed on vehicle, Performance Notes -.Improved tire wear, straighten tracking, improve steering feel Additional Attributes: GTIN: 00841788110105 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 8 x 8 inches

The Sinister Diesel Adjustable Track Bar is precision manufactured from high strength forged bars for unparalleled durability and includes long lasting Heavy Duty polyurethane bushings. With this track bar you will drive straighter, improve tire wear, have less "wander" and a much more positive steering feel. This kit accommodates 4" lifts (more if used with a drop bracket!) and helps eliminate the "Death Wobble" that's sometimes found in lifted trucks. The Sinister Diesel Track Bar is a great compliment to our Steering Box Support!, Performance Notes -.Improved tire wear, straighten tracking, improve steering feel;Includes:.Sinister Diesel Adjustable Track Bar, All hardware necessary for installationInstallation. Construction - Forged Steel bar and Heavy Duty Polyurethane Bushings, Product Design - Easily adjustable while installed on vehicle Additional Attributes: GTIN: 00841788103688 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 7 x 7 x 7 inches

This 2008-UP Ford F250/F350 Track Bar Bump Steer Bracket Kit features a fabricated steel construction, protected by a durable semi-gloss powder coat finish, and carries a lifetime warranty against breakage or manufacturer defect. ICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for enthusiasts that demand the highest levels of performance, ruggedness, and durability out of their suspension systems. Bolt-on design utilizes factory frame holes for simple installation Corrects bump steer geometry 2-position cam optimized for 2.5” & 4.5” lifts Centers front axle under frame with factory track bar Reduces road feedback through steering Durable satin black powder coat finish Lifetime warranty against breakage or manufacturer defect Additional Attributes: GTIN: 00840103409139 3390: Performance 10: Steel 30: yes 3145: Specific 2371: No 17: Black Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I64039_REVA

This bracket drops your pan rod bar to keep your steering geometry within factory specs. It has two different mounting points, one for a 4 inch lift and one for the 6 inch lift. Additional Attributes: GTIN: 00840103402215 2371: No 17: Black 3390: Performance 10: Steel 30: yes 3145: Specific Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches

Upgrading your Jeep Wrangler JL or Gladiator front track bar is great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the front-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings. This added rigidity improves vehicle handling and helps prevent possible front-end wobble issues from more compliant bushing materials. These joints also improve the overall articulation by allowing the suspension to cycle fully without binding. Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing On vehicle adjustable for precise track alignment using ICON’s Double Adjuster Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness Easy install into OEM mounts w/ application specific hardware Allows for full suspension articulation without binding Dual stage powder coat finish provides excellent corrosion resistance “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability Additional Attributes: GTIN: 00840103401348 Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH 40: Yes 117: Black Bushing Material: Polyurethane 2371: yes 17: Black 1727: Bushing 3143: Rod End Bearing 200: Powdercoated 3390: Performance Greaseable: No 2339: No 10: Steel 30: Yes Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I22027_REVA

Upgrading your Jeep Gladiator's rear track bar is a great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the rear-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings for improved vehicle handling. Overall articulation is also improved by allowing the suspension to cycle fully without binding. Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing On vehicle adjustable for precise track alignment using ICON’s Double Adjuster Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness Easy install into OEM mounts w/ application specific hardware Allows for full suspension articulation without binding Dual stage powder coat finish provides excellent corrosion resistance “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability Additional Attributes: GTIN: 00840103408651 1727: Bushing 3143: Rod End Bearing 200: Powdercoated 3390: Performance Greaseable: No 2339: No 10: Steel 30: Yes Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH 40: Yes 117: Black Bushing Material: Polyurethane 2371: yes 17: Black Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I22068_REVA

Additional Attributes: GTIN: 00840103405544 17: Black 1727: Rod End Bearing End 2 Type: BALL JOINT 200: Powdercoated 3390: Performance Greaseable: Yes 2339: Yes 10: Steel 30: Yes Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH 40: Yes Bushing Material: Rod End Bearing 2371: No Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I64038_REVA

The ICON Vehicle Dynamics 2014-UP Ram 2500 4WD Adjustable Front Track Bar helps eliminate the notorious "Death Wobble" these trucks have when you begin to adjust the ride height. The Upgraded ICON Ram 2500 adjustable track bar is great for centering the front axle allowing it to track perfectly under the truck vs. offset to the side. This bar is constructed of 1/4" Wall 1 1/2" DOM Tubing and is CNC Bent for a precise OE style fit. The weak OEM rubber bushing is eliminated and our 1" captured uniball bearing on the driver side minimizes overall deflection while allowing just enough movement so steering wheel feedback is not present. We use a PTFE lined rod end on the passenger side which also reduces deflection and threads into our left/right adjuster that allows easy on truck adjustability for the perfect front end alignment. Minimal to no Deflection Easy install in to OEM mounts w/ application specific hardware On vehicle adjustable for precise track alignment Utilizes a 1" uniball on the driver side and PTFE lined rod end on the passenger side Constructed with CNC machined and bent 1 1/2" x .250 wall 1026 seamless DOM tubing Allows for full suspension articulation without binding Additional Attributes: GTIN: 00840103408897 Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH 40: Yes 117: Silver Bushing Material: Rod End Bearing 2371: yes 17: Black 1727: Rod End Bearing End 2 Type: Rod End Bearing 200: Powdercoated 3390: Performance Greaseable: No 2339: No 10: DOM Steel 30: Yes Service Parts: 614512 - 64031/214030 BEARING AND RET RING KIT Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I214214_REVA

Upgrading your Jeep Wrangler's rear track bar is a great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the rear-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings for improved vehicle handling. Overall articulation is also improved by allowing the suspension to cycle fully without binding. Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing On vehicle adjustable for precise track alignment using ICON’s Double Adjuster Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness Easy install into OEM mounts w/ application specific hardware Allows for full suspension articulation without binding Dual stage powder coat finish provides excellent corrosion resistance “ICON 1K” tested under rigorous off-road conditions to validate performance, strength, and durability Additional Attributes: GTIN: 00840103401355 Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH 40: Yes 117: Black Bushing Material: Polyurethane 2371: yes 17: Black 1727: Bushing End 2 Type: Rod End Bearing 200: Powdercoated 3390: Performance Greaseable: No 2339: No 10: Steel 30: Yes Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1.0 Package UOM: EA Dimension: x x inches PDF: I22028_REVA