Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.

Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available.

Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available.

Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.

Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.This Part Fits: Year Make Model Submodel 2018 Dodge Challenger SRT Demon 2015-2020 Dodge Challenger SRT Hellcat 2019-2020 Dodge Challenger SRT Hellcat Redeye 2019-2020 Dodge Challenger SRT Hellcat Redeye Widebody 2018-2020 Dodge Challenger SRT Hellcat Widebody 2015-2020 Dodge Charger SRT Hellcat 2018-2020 Jeep Grand Cherokee Trackhawk

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2015-2021 Ford F-150 King Ranch 2015-2021 Ford F-150 Lariat 2016-2021 Ford F-150 Limited 2015-2021 Ford F-150 Platinum 2018-2021 Ford F-150 Police Responder 2017-2021 Ford F-150 Raptor 2016-2021 Ford F-150 SSV 2021 Ford F-150 Tremor 2015-2021 Ford F-150 XL 2015-2021 Ford F-150 XLT

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps?Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit.Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH).These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol.This Part Fits: Year Make Model Submodel 2015-2021 Ford F-150 King Ranch 2015-2021 Ford F-150 Lariat 2016-2021 Ford F-150 Limited 2015-2021 Ford F-150 Platinum 2018-2021 Ford F-150 Police Responder 2017-2021 Ford F-150 Raptor 2016-2021 Ford F-150 SSV 2021 Ford F-150 Tremor 2015-2021 Ford F-150 XL 2015-2021 Ford F-150 XLT

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2005 Chevrolet Silverado 1500 Base 2016-2019 Chevrolet Silverado 1500 Custom 2019 Chevrolet Silverado 1500 Custom Trail Boss 2014-2019 Chevrolet Silverado 1500 High Country 2005-2006,2009-2013 Chevrolet Silverado 1500 Hybrid 2005-2013,2015-2018 Chevrolet Silverado 1500 LS 2005-2019 Chevrolet Silverado 1500 LT 2019 Chevrolet Silverado 1500 LT Trail Boss 2007-2019 Chevrolet Silverado 1500 LTZ 2019 Chevrolet Silverado 1500 RST 2005-2006 Chevrolet Silverado 1500 SS 2015-2019 Chevrolet Silverado 1500 SSV 2005-2019 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2005 Chevrolet Silverado 1500 Z71 Off-Road 2019 GMC Sierra 1500 AT4 2005,2014-2019 GMC Sierra 1500 Base 2005-2019 GMC Sierra 1500 Denali 2019 GMC Sierra 1500 Elevation 2005-2006,2009-2013 GMC Sierra 1500 Hybrid 2006-2013 GMC Sierra 1500 SL 2005-2019 GMC Sierra 1500 SLE 2005-2019 GMC Sierra 1500 SLT 2005-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2019-2020 Ford Mustang Bullitt 2025 Ford Mustang Dark Horse 2025 Ford Mustang Dark Horse Premium 2015-2023,2025 Ford Mustang EcoBoost 2015-2023,2025 Ford Mustang EcoBoost Premium 2011-2023,2025 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2023,2025 Ford Mustang GT Premium 2025 Ford Mustang GTD 2021-2023 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2011-2014,2020-2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

Snow 2011+ Ford Mustang Fuel Hat High Output (3 Pump 1-274ANd 2-285)This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2019-2020 Ford Mustang Bullitt 2024 Ford Mustang Dark Horse 2024 Ford Mustang Dark Horse Premium 2015-2024 Ford Mustang EcoBoost 2015-2024 Ford Mustang EcoBoost Premium 2011-2024 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2024 Ford Mustang GT Premium 2021-2023 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang Shelby GT350R 2011-2014,2020-2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2017-2022 Chevrolet Camaro LS 2016-2022 Chevrolet Camaro LT 2020-2022 Chevrolet Camaro LT1 2016-2022 Chevrolet Camaro SS 2017-2022 Chevrolet Camaro ZL1

Snow Performance Chevrolet Camaro 6th Gen Fuel Hat (Triple Pump)This Part Fits: Year Make Model Submodel 2014-2019 Cadillac CTS V 2017-2023 Chevrolet Camaro LS 2016-2023 Chevrolet Camaro LT 2020-2023 Chevrolet Camaro LT1 2016-2023 Chevrolet Camaro SS 2017-2023 Chevrolet Camaro ZL1

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2023 Jeep Grand Cherokee 30th Anniversary 4xe 2022-2023 Jeep Grand Cherokee 4xe 2016 Jeep Grand Cherokee 75th Anniversary 2021 Jeep Grand Cherokee 80th Anniversary 2018-2020,2022-2023 Jeep Grand Cherokee Altitude 2023 Jeep Grand Cherokee Altitude X 2018-2021 Jeep Grand Cherokee High Altitude 2011-2020,2022-2023 Jeep Grand Cherokee Laredo 2021 Jeep Grand Cherokee Laredo E 2021,2023 Jeep Grand Cherokee Laredo X 2011-2023 Jeep Grand Cherokee Limited 2019-2021 Jeep Grand Cherokee Limited X 2011-2023 Jeep Grand Cherokee Overland 2022-2023 Jeep Grand Cherokee Overland 4xe 2012 Jeep Grand Cherokee Overland Summit 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8 2014-2023 Jeep Grand Cherokee Summit 2022-2023 Jeep Grand Cherokee Summit 4xe 2022-2023 Jeep Grand Cherokee Summit Reserve 2022-2023 Jeep Grand Cherokee Summit Reserve 4xe 2018-2021 Jeep Grand Cherokee Trackhawk 2017-2022 Jeep Grand Cherokee Trailhawk 2022-2023 Jeep Grand Cherokee Trailhawk 4xe 2019-2020 Jeep Grand Cherokee Upland

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2023 Jeep Grand Cherokee 30th Anniversary 4xe 2022-2023 Jeep Grand Cherokee 4xe 2016 Jeep Grand Cherokee 75th Anniversary 2021 Jeep Grand Cherokee 80th Anniversary 2018-2020,2022-2023 Jeep Grand Cherokee Altitude 2023 Jeep Grand Cherokee Altitude X 2018-2021 Jeep Grand Cherokee High Altitude 2011-2020,2022-2023 Jeep Grand Cherokee Laredo 2021 Jeep Grand Cherokee Laredo E 2021,2023 Jeep Grand Cherokee Laredo X 2011-2023 Jeep Grand Cherokee Limited 2019-2021 Jeep Grand Cherokee Limited X 2011-2023 Jeep Grand Cherokee Overland 2022-2023 Jeep Grand Cherokee Overland 4xe 2012 Jeep Grand Cherokee Overland Summit 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8 2014-2023 Jeep Grand Cherokee Summit 2022-2023 Jeep Grand Cherokee Summit 4xe 2022-2023 Jeep Grand Cherokee Summit Reserve 2022-2023 Jeep Grand Cherokee Summit Reserve 4xe 2018-2021 Jeep Grand Cherokee Trackhawk 2017-2022 Jeep Grand Cherokee Trailhawk 2022-2023 Jeep Grand Cherokee Trailhawk 4xe 2019-2020 Jeep Grand Cherokee Upland

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2023 Jeep Grand Cherokee 30th Anniversary 4xe 2022-2023 Jeep Grand Cherokee 4xe 2016 Jeep Grand Cherokee 75th Anniversary 2021 Jeep Grand Cherokee 80th Anniversary 2018-2020,2022-2023 Jeep Grand Cherokee Altitude 2023 Jeep Grand Cherokee Altitude X 2018-2021 Jeep Grand Cherokee High Altitude 2011-2020,2022-2023 Jeep Grand Cherokee Laredo 2021 Jeep Grand Cherokee Laredo E 2021,2023 Jeep Grand Cherokee Laredo X 2011-2023 Jeep Grand Cherokee Limited 2019-2021 Jeep Grand Cherokee Limited X 2011-2023 Jeep Grand Cherokee Overland 2022-2023 Jeep Grand Cherokee Overland 4xe 2012 Jeep Grand Cherokee Overland Summit 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8 2014-2023 Jeep Grand Cherokee Summit 2022-2023 Jeep Grand Cherokee Summit 4xe 2022-2023 Jeep Grand Cherokee Summit Reserve 2022-2023 Jeep Grand Cherokee Summit Reserve 4xe 2018-2021 Jeep Grand Cherokee Trackhawk 2017-2022 Jeep Grand Cherokee Trailhawk 2022-2023 Jeep Grand Cherokee Trailhawk 4xe 2019-2020 Jeep Grand Cherokee Upland

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2020-2022 Ford Mustang Shelby GT500

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps?Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit.Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH).These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol.This Part Fits: Year Make Model Submodel 2020-2022 Ford Mustang Shelby GT500

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps?Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit.Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH).These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol.This Part Fits: Year Make Model Submodel 2020-2022 Ford Mustang Shelby GT500

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray 2015-2019 Chevrolet Corvette Z06 2019 Chevrolet Corvette ZR1

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 2003-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 2003-2004,2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon 2009-2013 Chevrolet Corvette ZR1

To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.This Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 2003-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 2003-2004,2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon 2009-2013 Chevrolet Corvette ZR1

Rock Slide 16-23 Toyota Tacoma Rock Sliders Long Bed

Remark 22+ Subaru WRX (VB) Sports Touring Spec - 4in. SS Quad Tips (Non-Resonated)

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93348 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1996-1998 Ford Mustang and interchanges with OE parts F8ZZ-5F250-BA and F6ZZ-5F250-LL. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 1996-1998 Ford Mustang GT 1996-1998 Ford Mustang SVT Cobra

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93333 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1994-1995 Ford Mustang and interchanges with OE part F4ZZ-5F250-A. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.Installation InstructionsThis Part Fits: Year Make Model Submodel 1994-1995 Ford Mustang GT 1995 Ford Mustang GTS 1994-1995 Ford Mustang SVT Cobra

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561990. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2009 Volkswagen Jetta and 2006-2009 Volkswagen Rabbit, this direct-fit catalytic converter also interchanges with OE parts 1K0 253 058 FJ and 1K0 254 510 L, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2007 Volkswagen Jetta 2.5 2008-2009 Volkswagen Jetta S 2008-2009 Volkswagen Jetta SE 2008-2009 Volkswagen Jetta SEL 2006 Volkswagen Jetta Value Edition 2007 Volkswagen Jetta Wolfsburg Edition 2006-2007 Volkswagen Rabbit 2.5 2008-2009 Volkswagen Rabbit S

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561585. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2018 Dodge Charger, 2006-2019 Chrysler 300, and additional vehicles. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2006-2018 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2010,2012-2019 Chrysler 300 S 2007-2018 Dodge Charger Pursuit 2007-2016 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2008-2013 Dodge Charger SE 2006-2008 Dodge Magnum R/T

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551294. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2009-2014 Ford E-350 Super Duty, 2009-2014 Ford E-250, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2009-2014 Ford E-150 Base 2009-2014 Ford E-150 XL 2009-2014 Ford E-150 XLT 2009-2014 Ford E-250 Base 2009-2014 Ford E-350 Super Duty Base 2009-2014 Ford E-350 Super Duty XL 2009-2014 Ford E-350 Super Duty XLT

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531552. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2015 Ford Fiesta. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2015 Ford Fiesta S 2011-2015 Ford Fiesta SE 2011-2012 Ford Fiesta SEL 2011-2012 Ford Fiesta SES 2013-2015 Ford Fiesta Titanium

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 551545. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2013 Mazda 3 and interchanges with OE parts L3F2-20-50XE and L3F2-20-50XC, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2010-2013 Mazda 3 Mazdaspeed

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 551092. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 2011-2015 Chevrolet Cruze, 2013-2015 Buick Encore, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.Technical BulletinThis Part Fits: Year Make Model Submodel 2013-2015 Buick Encore Base 2013-2015 Buick Encore Convenience 2013-2015 Buick Encore Leather 2013-2015 Buick Encore Premium 2011-2015 Chevrolet Cruze Eco 2011-2015 Chevrolet Cruze LT 2011-2015 Chevrolet Cruze LTZ 2012-2015 Chevrolet Sonic LT 2012-2015 Chevrolet Sonic LTZ 2013-2015 Chevrolet Sonic RS 2015 Chevrolet Trax LS 2015 Chevrolet Trax LT 2015 Chevrolet Trax LTZ