The ColorSHIFT(tm) Halo Kit can produce any color including whites from 3000K-15000K with the push of a button. This allows the user to dial-in the exact color rings that they desire. These 3-Chip 5050 SMD rings are BRIGHT, and for some they may be too bright, that is why (for the first time) the user has full control over the ring brightness. ORACLE SMD or "Surface Mount Diode" Halos utilize an advanced type of LED chip that can produce brilliant light output while only consuming a small amount of power. The SMD chips are installed onto a CAD designed 6-layer PCB (Printed Circuit Board) which is very sturdy and will not break if pressured. The PCB can easily be mounted to a headlight housing using the pre-installed 3M adhesive tape backing. ColorSHIFT(tm) Halo Kits include the following: ORACLE ColorSHIFT(tm) SMD Halos, LED Drivers, Optional ORACLE ColorSHIFT(tm) Controller Module, Optional ORACLE ColorSHIFT(tm) Wireless Remote, and DIY Installation Instruction Guide.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006-2007 Dodge Charger Base 2006 Dodge Charger Daytona R/T 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger R/T 2006-2010 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2006-2010 Dodge Charger SXT

Designed to fit flush with the truck bed of the Jeep Gladiator, the new JT Flush Tail Lights from ORACLE Lighting offer improved features and OEM factory styling. This innovative design has a sleek tail light for Jeep Gladiators that wraps tightly around the truck. Protruding out significantly less than the factory tail lights, this low-profile design avoids damage while trail riding. Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle, making it a unique solution for the Jeep Gladiator. These lights provide improved LED lighting features including high-powered reverse lights and signature perimeter lighting. In addition to standard features, the plug-and-play design features an enhanced reverse function and caters to the Jeep's optional cross-traffic sensor. The reverse light features 12 high-powered LEDs for optimal rear illumination. The cross-traffic sensor can be swapped directly over from the factory assembly and easily installs into the ORACLE Lighting tail lights for Jeep Gladiator. Gain sleek styling that compliments the original body lines and tons of innovative features. With the superior quality and durability that ORACLE Lighting is known for, these tail lights are the perfect upgrade for your Jeep Gladiator!Installation InstructionsThis Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2020,2022 Jeep Gladiator Altitude 2023 Jeep Gladiator Freedom 2021-2023 Jeep Gladiator High Altitude 2020 Jeep Gladiator Launch Edition 2020-2024 Jeep Gladiator Mojave 2020-2023 Jeep Gladiator Overland 2020-2024 Jeep Gladiator Rubicon 2020-2024 Jeep Gladiator Sport 2020-2024 Jeep Gladiator Sport S 2021-2023 Jeep Gladiator Texas Trail 2021-2024 Jeep Gladiator Willys 2021-2023 Jeep Gladiator Willys Sport

Display to your customers that you are an official dealer for ORACLE Lighting Products with our ORACLE Lighting Official Dealer Banners!

The ORACLE Lighting Technology Q-5 flashlights provide a bright, focused beam with a wide and long lighting range. Intense brightness, long lighting time, waterproof and reliability are the characteristics of all ORACLE Lighting brand flashlights. With such high-intensity and solid design, the ORACLE Lighting Technology Q-5 flashlight is perfect for outdoor rescue and exploration and meets the demands of lighting in any harsh condition or climate. Product Features: Length: 9.9 in. Width: 1.5 in. Height: 1.5 in. Weight: 1 lb. 1.2 oz. Cree XML 3w LED (Made in the U.S.A.) with 350 Lumen output. IP67 Waterproof Rating. Momentary on/off switch. 1200 minute runtime on low setting. Specialized optics create a strong focused beam that throws light more than 500 meters. Highly effective intelligent circuit with 5 light modes: High/Low/Dim/SOS/Strobe. Digitally regulated output (maintains constant brightness). Type III anodized aviation aluminum allowing for extreme durability. Rechargeable lithium batteries and dual charger. Wrist strap. 1 year warranty. Package Includes: 1 x ORACLE Q-5 Tactical LED Flashlight, 2 x Rechargeable Lithium Batteries, 1 x Battery Charger, 1 x Wrist Strap.

Pre-Assembled fog lights are great for customers that do not want to open their existing fog lights to install a halo kit. These fog lights come pre-assembled with ORACLE halos professionally installed into these headlight housings. We offer these lights for almost every make and model and we are constantly adding new vehicles. ORACLE Pre-Assembled fog lights are ideal for installers that do not have the time to process installation services. The lights arrive with ORACLE Halo rings installed and just like our halo kits, they include a lifetime warranty. We offer a wide range of vehicular fitments, plus we are constantly adding new vehicle model fog lights to our list. If you do not see the vehicle fog lights you're looking for, contact one of our sales team members and we will gladly find the right solution for you. ORACLE Pre-Installed fog lights are similar to stock OEM Factory Lights, meeting the durability and quality standards of OEM factory fog lights. ORACLE Halo Rings are professionally installed in house by our own trained technicians. ORACLE Halos deliver a brilliant light output and include a lifetime warranty. ORACLE Lighting Technology proudly stands by the durability, safety, and full functionality of these lights. These Pre-Assembled Fog Lights comply with the applicable safety and function requirements of U.S. Department of Transportation's Federal Motor Vehicle Safety Standard 108 (FMVSS) and SAE.This Part Fits: Year Make Model Submodel 2005-2007 Chrysler 300 Base 2005-2010 Chrysler 300 C 2005-2010 Chrysler 300 C SRT8 2005-2010 Chrysler 300 Limited 2008-2009 Chrysler 300 LX 2010 Chrysler 300 S 2009 Chrysler 300 Signature Series 2005-2010 Chrysler 300 Touring

ORACLE Lighting is excited to reveal our new flush mount LED tail light design for the new Ford Bronco. Protruding out significantly less than the factory tail lights, this low-profile design helps avoid potential damage while trail riding. These Ford Bronco tail lights feature an attractive design and functional LED lighting elements including high-powered reverse lights and unique signature perimeter lighting No more problems backing up at night because these LED reverse lights are basically a pair of LED light bars mounted into the tail light which will provide over 8,000 Lumens of rear-facing illumination. This innovative design wraps tightly around the truck. Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle, making it a unique solution for the Bronco. These flush tail lights provide improved aesthetics and functional LED lighting features including high-powered reverse lights and signature perimeter lighting. As you can see in the animation below, these lights wrap tightly to the vehicle body providing a Flush mount design which not only looks great but is functional as well. Damaging factory tail lights on trails is not an uncommon issue for owners who often off-road their Broncos. The factory design protrudes out several inches past the body which creates unnecessary exposure to trees, boulders, and other obstacles on tight trails. The frame of the ORACLE Lighting Flush Mount LED Tail Light for the Ford Bronco is tight to the body panel reducing exposure and vulnerability. Even if you don't off-road your Bronco often, these lights provide plenty of innovative features and unique styling -which make them an awesome mod for any Bronco owner. Gain sleek styling that compliments the original body lines and tons of innovative features. With the superior quality and durability that ORACLE Lighting is known for, these tail lights are the perfect upgrade for your Bronco!Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2021-2024 Ford Bronco Wildtrak

This projector fits right into the pre-existing hole in the back of your reflector bucket with little to no modification. The 50mm H1 7.1 offers amazing light output, the most precise sharp cutoff line, and non-existent glare. Product Features: Application: Universal. Cutoff Shields: Newly Designed Precise Cutoff. Bezels Included. Adapter & Locking Plates Included. Package Includes: 2 x ORACLE 50mm H1 7.1 Retrofit Projectors. 2 x Projector Bezels. Adapter Plates and Locking Plates.

Designed to fit flush with the rear end of the Jeep Wrangler, the new JL Flush Tail Lights from ORACLE Lighting offer new LED features and improved styling. This innovative design is a sleek tail light for Jeep Wrangler JL's that wraps tightly around the truck. Protruding out significantly less than the factory tail lights, this low-profile design avoids damage while trail riding. Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle, making it a unique solution for the Jeep. These Jeep Wrangler JL tail lights provide improved aesthetics and functional LED lighting features including high-powered reverse lights and signature perimeter lighting. In addition to standard features, the plug-and-play design features an enhanced reverse function and caters to the Jeep's optional cross-traffic sensor. The reverse light features 12 high-powered LEDs for optimal rear illumination. The cross-traffic sensor can be swapped directly over from the factory assembly and easily installs into the ORACLE Lighting tail lights for Jeep Wrangler JL. These flush-mount tail lights are compatible with base and LED packages. Gain sleek styling that compliments the original body lines and tons of innovative features. With the superior quality and durability that ORACLE Lighting is known for, these tail lights are the perfect upgrade for your Jeep Wrangler JL!This Part Fits: Year Make Model Submodel 2021 Jeep Wrangler 80th Anniversary 2021,2023 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2024 Jeep Wrangler Rubicon 2018-2024 Jeep Wrangler Sport 2018-2024 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021,2023 Jeep Wrangler Unlimited Freedom 2021-2023 Jeep Wrangler Unlimited High Altitude 2021-2024 Jeep Wrangler Unlimited High Altitude 4xe 2022-2023 Jeep Wrangler Unlimited High Tide 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2024 Jeep Wrangler Unlimited Rubicon 2021-2024 Jeep Wrangler Unlimited Rubicon 392 2021-2024 Jeep Wrangler Unlimited Rubicon 4xe 2018-2024 Jeep Wrangler Unlimited Sahara 2021-2024 Jeep Wrangler Unlimited Sahara 4xe 2021-2023 Jeep Wrangler Unlimited Sahara Altitude 2018-2024 Jeep Wrangler Unlimited Sport 2021-2023 Jeep Wrangler Unlimited Sport Altitude 2018-2024 Jeep Wrangler Unlimited Sport S 2021-2024 Jeep Wrangler Unlimited Willys 2023-2024 Jeep Wrangler Unlimited Willys 4xe 2021-2024 Jeep Wrangler Unlimited Willys Sport 2021-2024 Jeep Wrangler Willys 2021-2024 Jeep Wrangler Willys Sport

Introducing the all-new Oculus Bi-LED Headlamp system by ORACLE Lighting. Featuring advanced LED projection with 4,800 Lumens of high-quality illumination for enhanced driver visibility in all weather conditions. The LED light source has lower power demands compared to the factory lamps while providing more light output.This Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2020,2022 Jeep Gladiator Altitude 2023 Jeep Gladiator Freedom 2021-2023 Jeep Gladiator High Altitude 2020 Jeep Gladiator Launch Edition 2020-2024 Jeep Gladiator Mojave 2020-2023 Jeep Gladiator Overland 2020-2024 Jeep Gladiator Rubicon 2020-2024 Jeep Gladiator Sport 2020-2024 Jeep Gladiator Sport S 2021-2023 Jeep Gladiator Texas Trail 2021-2024 Jeep Gladiator Willys 2021-2023 Jeep Gladiator Willys Sport 2021 Jeep Wrangler 80th Anniversary 2021,2023 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2024 Jeep Wrangler Rubicon 2018-2024 Jeep Wrangler Sport 2018-2024 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021,2023 Jeep Wrangler Unlimited Freedom 2021-2023 Jeep Wrangler Unlimited High Altitude 2021-2024 Jeep Wrangler Unlimited High Altitude 4xe 2022-2023 Jeep Wrangler Unlimited High Tide 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2024 Jeep Wrangler Unlimited Rubicon 2021-2024 Jeep Wrangler Unlimited Rubicon 392 2021-2024 Jeep Wrangler Unlimited Rubicon 4xe 2018-2024 Jeep Wrangler Unlimited Sahara 2021-2024 Jeep Wrangler Unlimited Sahara 4xe 2021-2023 Jeep Wrangler Unlimited Sahara Altitude 2018-2024 Jeep Wrangler Unlimited Sport 2021-2023 Jeep Wrangler Unlimited Sport Altitude 2018-2024 Jeep Wrangler Unlimited Sport S 2021-2024 Jeep Wrangler Unlimited Willys 2023-2024 Jeep Wrangler Unlimited Willys 4xe 2021-2024 Jeep Wrangler Unlimited Willys Sport 2021-2024 Jeep Wrangler Willys 2021-2024 Jeep Wrangler Willys Sport

The Popular Oculus Bi-LED Headlights by ORACLE Lighting are now available in a ColorSHIFT(tm) RGB+W Color-Changing version. Oculus Headlights feature advanced focused LED projection that outshines all the competition (including the factory LED headlights). With 4,800 Lumens of high-quality Bi-LED projection, these headlights provide enhanced driver visibility in all weather conditions. Light focus is very important for driver safety and for others who can have their vision obstructed by glare. We are proud to offer the most focused & lowest-glare LED Headlights for the JL and JT on the market. Each LED feature has a separate cable output and can be connected together so all 3 create the same color or set up as 3 separate Channels or zones depending on the user preference and the ColorSHIFT(tm) controller selected. Please note that these features are intended for off-road show use only and are not compliant for street use. The Pure-White DRL has its own wiring harness (same as the original Oculus) that connects to the fuse box with an add-a-circuit for easy and safe integration. The DRL will come on when the engine is running or can be connected to a switch (including the factory Aux switches) for additional user control.This Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2020,2022 Jeep Gladiator Altitude 2023 Jeep Gladiator Freedom 2021-2023 Jeep Gladiator High Altitude 2020 Jeep Gladiator Launch Edition 2020-2024 Jeep Gladiator Mojave 2020-2023 Jeep Gladiator Overland 2020-2024 Jeep Gladiator Rubicon 2020-2024 Jeep Gladiator Sport 2020-2024 Jeep Gladiator Sport S 2021-2023 Jeep Gladiator Texas Trail 2021-2024 Jeep Gladiator Willys 2021-2023 Jeep Gladiator Willys Sport 2021 Jeep Wrangler 80th Anniversary 2021,2023 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2024 Jeep Wrangler Rubicon 2018-2024 Jeep Wrangler Sport 2018-2024 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021,2023 Jeep Wrangler Unlimited Freedom 2021-2023 Jeep Wrangler Unlimited High Altitude 2021-2024 Jeep Wrangler Unlimited High Altitude 4xe 2022-2023 Jeep Wrangler Unlimited High Tide 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2024 Jeep Wrangler Unlimited Rubicon 2021-2024 Jeep Wrangler Unlimited Rubicon 392 2021-2024 Jeep Wrangler Unlimited Rubicon 4xe 2018-2024 Jeep Wrangler Unlimited Sahara 2021-2024 Jeep Wrangler Unlimited Sahara 4xe 2021-2023 Jeep Wrangler Unlimited Sahara Altitude 2018-2024 Jeep Wrangler Unlimited Sport 2021-2023 Jeep Wrangler Unlimited Sport Altitude 2018-2024 Jeep Wrangler Unlimited Sport S 2021-2024 Jeep Wrangler Unlimited Willys 2023-2024 Jeep Wrangler Unlimited Willys 4xe 2021-2024 Jeep Wrangler Unlimited Willys Sport 2021-2024 Jeep Wrangler Willys 2021-2024 Jeep Wrangler Willys Sport

Product Specs: 1,600 Lumens Light Output. 4 Phillips ZES 5W LEDs. Advanced Optics Design for Optimal Visibility. Full Beam high output design. Precision Beam "No Glare" output design. 2 Year Warranty.

Change Colors, Control Brightness and Strobing, Select and Create DIY Scenes, and Control your Lights with your Music! ORACLE Lightings Off-Road Underbody LED Rock Light Kit will fit virtually any 4x4 off-road vehicle, Jeep or truck. With heavy gauge wiring and waterproof construction, this kit is built to last in the most extreme conditions. Our ColorSHIFT(tm) Technology allows you to select from thousands of colors! Control the functions and colors of your kit via the Bluetooth App, free to download in your app store.Installation Instructions

Customize your headlight to the max with dynamic styling and a simple, easy install! The ORACLE Lighting Dynamic ColorSHIFT(tm) halo kit for the 2015-2021 Dodge Challenger features our expertly-crafted surface-mount waterproof design and our Dynamic ColorSHIFT(tm) technology for brilliant chasing colors with the best quality LED components. Encased in a special polymer resin, our surface mount halos are completely waterproof (meaning they can function properly even when submerged underwater), and they easily install by attaching directly to the exterior of the headlight lens using a patent-pending system. We also use advanced LED chips that produce an impressively bright output while consuming less power. This simple process cuts down installation time from hours to just minutes! No removing the headlights, no baking the lights, no cutting the lights! The latest advancement in our expansive lighting modifications, our Dynamic ColorSHIFT(tm) technology allows the user to run multi-color moving patterns. Conveniently controlled through a free smartphone app, the system features over 200 pre-programmed moving patterns as well as static color control and white mode for normal street driving. In addition to the pre-programmed features, the user can also create custom designs through pixel editing in the app. These vividly eye-catching lighting effects are sure to wow any car enthusiast, and the chasing RGB halos are made stress-free by our surface-mount installation and plug-and-play wiring. Connect the ring terminals to the + and - battery terminals, then control your lights with the smartphone app from the included Dynamic ColorSHIFT(tm) controller. Using the latest lighting technology, our cutting-edge halo kits for cars are a great way to personalize your ride with show-stopping looks and industry-leading performance. Stand out from the look-alikes with an ORACLE Lighting halo kit!Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2021 Dodge Challenger GT 2015-2021 Dodge Challenger R/T 2017-2019 Dodge Challenger R/T 392 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016-2021 Dodge Challenger R/T Scat Pack 2021 Dodge Challenger R/T Scat Pack Shaker Widebody 2019-2021 Dodge Challenger R/T Scat Pack Widebody 2016 Dodge Challenger R/T Shaker 2015 Dodge Challenger Scat Pack 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2021 Dodge Challenger SRT Hellcat 2019-2021 Dodge Challenger SRT Hellcat Redeye 2019-2021 Dodge Challenger SRT Hellcat Redeye Widebody 2018-2021 Dodge Challenger SRT Hellcat Widebody 2020-2021 Dodge Challenger SRT Super Stock 2015-2021 Dodge Challenger SXT 2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392 2021 Dodge Challenger T/A 392 Widebody

Customize your vehicle with a vibrant new look with universal LED letter badges from ORACLE Lighting! These individual LED illuminated letters for cars are the perfect way to make your own marquee-style glowing vehicle badge. When turned on, the letters emit a soft edge-lit glow to make your custom badge stand out. Even when off, the sleek design of the letter housings gives a customized high-end appearance. The premium construction and overall styling deliver great value for an easy DIY illuminated badge. Simply choose the letters you need, and get ready to draw attention to your ride with a build-your-own glowing letter design!Installation Instructions

ORACLE Halo Kits are the single most "head-turning" modification you can do for such a small investment. Each ORACLE Halo utilizes the latest lighting technology and the highest quality materials available on the market. ORACLE SMD or "Surface Mount Diode" Halos utilize an advanced type of LED chip that can produce brilliant light output while only consuming a small amount of power. The SMD chips are installed onto a CAD designed 6-layer PCB (Printed Circuit Board) which is very sturdy and will not break if pressured. The PCB can easily be mounted to a fog light housing using the pre-installed 3M adhesive tape backing. This halo kit is 12V powered and can be wired to a controller, switch, or directly to the parking/running lights.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Honda Pilot EX 2004-2005 Honda Pilot EX-L 2003-2005 Honda Pilot LX

ORACLE Halo Kits are the single most "head-turning" modification you can do for such a small investment. Each ORACLE Halo utilizes the latest lighting technology and the highest quality materials available on the market. ORACLE SMD or "Surface Mount Diode" Halos utilize an advanced type of LED chip that can produce brilliant light output while only consuming a small amount of power. The SMD chips are installed onto a CAD designed 6-layer PCB (Printed Circuit Board) which is very sturdy and will not break if pressured. The PCB can easily be mounted to a fog light housing using the pre-installed 3M adhesive tape backing. This halo kit is 12V powered and can be wired to a controller, switch, or directly to the parking/running lights.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2013 Mini Cooper Base 2009-2013 Mini Cooper Clubman 2012-2013 Mini Cooper Coupe 2012-2013 Mini Cooper Coupe John Cooper Works 2012-2013 Mini Cooper Coupe S 2009-2013 Mini Cooper John Cooper Works 2009-2013 Mini Cooper John Cooper Works Clubman 2013 Mini Cooper John Cooper Works GP 2012-2013 Mini Cooper Roadster 2012-2013 Mini Cooper Roadster John Cooper Works 2012-2013 Mini Cooper Roadster S 2009-2013 Mini Cooper S 2009-2013 Mini Cooper S Clubman

ORACLE Halo Kits are the single most "head-turning" modification you can do for such a small investment. Each ORACLE Halo utilizes the latest lighting technology and the highest quality materials available on the market. ORACLE SMD or "Surface Mount Diode" Halos utilize an advanced type of LED chip that can produce brilliant light output while only consuming a small amount of power. The SMD chips are installed onto a CAD designed 6-layer PCB (Printed Circuit Board) which is very sturdy and will not break if pressured. The PCB can easily be mounted to a fog light housing using the pre-installed 3M adhesive tape backing. This halo kit is 12V powered and can be wired to a controller, switch, or directly to the parking/running lights.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Land Rover Range Rover HSE

ORACLE Halo Kits are the single most "head-turning" modification you can do for such a small investment. Each ORACLE Halo utilizes the latest lighting technology and the highest quality materials available on the market. ORACLE SMD or "Surface Mount Diode" Halos utilize an advanced type of LED chip that can produce brilliant light output while only consuming a small amount of power. The SMD chips are installed onto a CAD designed 6-layer PCB (Printed Circuit Board) which is very sturdy and will not break if pressured. The PCB can easily be mounted to a fog light housing using the pre-installed 3M adhesive tape backing. This halo kit is 12V powered and can be wired to a controller, switch, or directly to the parking/running lights.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012 Jeep Liberty Jet 2008-2012 Jeep Liberty Limited 2010-2011 Jeep Liberty Renegade 2008-2012 Jeep Liberty Sport

Looking for a bright, versatile, and easy to install LED Headlight Conversion Option The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. If the bulb becomes hot and surpasses optimal working temperature, the driver can reduce the current by altering the PWM duty cycle until temperature stabilizes. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened. Although reducing the current reduces luminosity, the current reduction is minimal.

Looking for a bright, versatile, and easy to install LED Headlight Conversion Option The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. If the bulb becomes hot and surpasses optimal working temperature, the driver can reduce the current by altering the PWM duty cycle until temperature stabilizes. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened. Although reducing the current reduces luminosity, the current reduction is minimal.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

Looking for a bright, versatile, and easy to install LED Headlight Conversion Option The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. If the bulb becomes hot and surpasses optimal working temperature, the driver can reduce the current by altering the PWM duty cycle until temperature stabilizes. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened. Although reducing the current reduces luminosity, the current reduction is minimal.

Looking for a bright, versatile, and easy to install LED Headlight Conversion Option The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. If the bulb becomes hot and surpasses optimal working temperature, the driver can reduce the current by altering the PWM duty cycle until temperature stabilizes. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened. Although reducing the current reduces luminosity, the current reduction is minimal.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

Looking for a bright, versatile, and easy to install LED Headlight Conversion Option The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. If the bulb becomes hot and surpasses optimal working temperature, the driver can reduce the current by altering the PWM duty cycle until temperature stabilizes. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened. Although reducing the current reduces luminosity, the current reduction is minimal.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

The new ORACLE Lighting V-Series packs a ton a features to make it not only user-friendly but also an amazing value with the all-new design technology. The V-Series bulbs feature fcCSP Flip-Chip Scale LED Packaging. The advantages of flip-chip technology are multiple: it provides enhanced electrical performance over standard wire bond technology, allows for a smaller form factor due to increased routing density, and eliminates wire-bond loops. An ultra-luminous and extremely efficient light output with superior durability and reliability. This new all-in-one diecast body design mimics the look of the original factory halogen bulb. This allows for easy installation without any additional wiring or external drivers. The die-cast design also provides increased thermal conductivity and heat dissipation to insure long bulb life. V-Series LED bulbs offer even more compatibility by working with vehicles that use the headlight bulb for the DRL function at a reduced voltage. The class-leading 6-32V ultra-wide range voltage protection will allow these LED bulbs to be used in Daytime Running Light Applications without common flicker issues. The V-Series bulb will dim to 50% brightness in DRL mode just like the factory halogen bulb. ORACLE Lightings new V-Series bulbs feature our SmartDrive Active Thermal Regulation temperature management. The integrated constant current linear LED driver inside the bulb uses a system called thermal foldback to protect the LEDs and the bulb components. The LED driver operates from a 6V to 24V input and offers constant current output at up to 1 Amp. Supplementing passive thermal management with active techniques such as this allow for a very small bulb package without risking damage to the LED or creating an environment where the LED lifetime would otherwise be significantly shortened.

ORACLE Lighting S3 LED Conversion Bulbs Instantly provide 3200 Lumens of Crystal Clear 6000K light output. The electronic components of the S3 Headlight bulbs are housed in a sealed waterproof heat-sink design, eliminating the need for external drivers and cooling fans. The CSP (Chip Scale Package) LED Chip Design features a small package size but high intensity volume per unit with less heat value resulting in industry-leading Luminous Efficacy (science talk for Best Bang for your Buck). This new low-profile design reduces common bulb fitment issues for an easy Plug & Play DIY installation.

ORACLE Lighting S3 LED Conversion Bulbs Instantly provide 3200 Lumens of Crystal Clear 6000K light output. The electronic components of the S3 Headlight bulbs are housed in a sealed waterproof heat-sink design, eliminating the need for external drivers and cooling fans. The CSP (Chip Scale Package) LED Chip Design features a small package size but high intensity volume per unit with less heat value resulting in industry-leading Luminous Efficacy (science talk for Best Bang for your Buck). This new low-profile design reduces common bulb fitment issues for an easy Plug & Play DIY installation.

ORACLE Lighting S3 LED Conversion Bulbs Instantly provide 3200 Lumens of Crystal Clear 6000K light output. The electronic components of the S3 Headlight bulbs are housed in a sealed waterproof heat-sink design, eliminating the need for external drivers and cooling fans. The CSP (Chip Scale Package) LED Chip Design features a small package size but high intensity volume per unit with less heat value resulting in industry-leading Luminous Efficacy (science talk for Best Bang for your Buck). This new low-profile design reduces common bulb fitment issues for an easy Plug & Play DIY installation.

ORACLE Lighting S3 LED Conversion Bulbs Instantly provide 3200 Lumens of Crystal Clear 6000K light output. The electronic components of the S3 Headlight bulbs are housed in a sealed waterproof heat-sink design, eliminating the need for external drivers and cooling fans. The CSP (Chip Scale Package) LED Chip Design features a small package size but high intensity volume per unit with less heat value resulting in industry-leading Luminous Efficacy (science talk for Best Bang for your Buck). This new low-profile design reduces common bulb fitment issues for an easy Plug & Play DIY installation.