Introducing the ultimate shift knob accessory for manual BMW gearboxes: the Mishimoto non-threaded shifter adapter. Made from aircraft-grade aluminum, this universal adapter is the perfect addition to your BMW. Our BMW shift knob adapter features a threaded male side that accepts our existing universal shift knobs and a female side that locks onto the BMW shift rod with stainless-steel set screws, giving you the freedom to customize your car's interior with ease. The adapter comes in two sleek finishes - black and silver anodize - to match any aesthetic. The included set screws come with threadlocker pre-applied for a secure fit while the included allen key, and small zip tie hold your shift boot up to make installation is a breeze. Upgrade your driving experience with our non-threaded shifter adapter by Mishimoto. As with all our products, the Mishimoto non-threaded shifter adapter is backed by our Mishimoto Lifetime Warranty.

Introducing the ultimate shift knob accessory for manual BMW gearboxes: the Mishimoto non-threaded shifter adapter. Made from aircraft-grade aluminum, this universal adapter is the perfect addition to your BMW. Our BMW shift knob adapter features a threaded male side that accepts our existing universal shift knobs and a female side that locks onto the BMW shift rod with stainless-steel set screws, giving you the freedom to customize your car's interior with ease. The adapter comes in two sleek finishes - black and silver anodize - to match any aesthetic. The included set screws come with threadlocker pre-applied for a secure fit while the included allen key, and small zip tie hold your shift boot up to make installation is a breeze. Upgrade your driving experience with our non-threaded shifter adapter by Mishimoto. As with all our products, the Mishimoto non-threaded shifter adapter is backed by our Mishimoto Lifetime Warranty.

These plastic inserts allow you to adapt your Mishimoto shift knob to almost any vehicle. Just bought a new project car and you want to start the build off with the shift knob from your daily driver? No problem, just find the right adapter, screw it into your shift knob, and install on your shifter. First mod: done.This kit includes four adapters to fit multiple vehicles with the following shifter threads: M8x1.25, M10x1.5, M10x1.25, and M12x1.25.

Your Z’s factory splash shield is just that, a splash shield. It works to keep water and dirt out of the engine bay, but that’s about all it does well. One well placed bump or unlucky rock and you can say goodbye to the stock splash shield, and if you’re really unlucky, your engine.----The Mishimoto skid plate for the 2023+ Nissan Z provides unmatched protection and performance. This skid plate is constructed from 3mm-thick powder-coated aluminum that’s built to withstand impacts on the street or the track. Our skid plate attaches to the front fascia and extends all the way back to the subframe, covering and protecting your Z’s plastic oil pan. A large vent with pre-installed foam shrouding creates a low-pressure zone under the car to help draw heat out of the engine bay and pull fresh air through the cooling stack.----The one-piece construction and slotted rear mounting points make installation of the Mishimoto 2023+ Nissan Z skid plate is a breeze in about 30 minutes. Our skid plate reuses the factory mounting points, eliminating the need for any drilling, or cutting. Once installed, maintenance is made fast and mess-free thanks to the removable service panel. Our service panel is installed with just three bolts and threaded inserts, so there’s no fumbling around with nuts or spacers for a simple oil change. Like all our 2023+ Nissan Z products, this skid plate is backed by our Mishimoto Lifetime Warranty for a lifetime of protection.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Nissan Z Nismo 2023-2024 Nissan Z Performance 2023 Nissan Z Proto Spec 2023-2024 Nissan Z Sport

The engineers at BMW did an excellent job striking a balance between exceptional power and cooling in the latest generation of BMW G8X M2, M3, and M4 models. Unfortunately, this meant positioning components, namely the oil cooler, in precarious positions. Placed on the undercarriage and parallel to the road’s surface, the G8X oil cooler is vulnerable to bumps, scrapes, debris, and other road hazards.--The engineers at Mishimoto recognized this shortcoming while developing the Mishimoto 2021+ BMW G8X M2, M3, and M4 performance oil cooler, and in true Mishimoto fashion, pushed the limits to construct the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate. This skid plate is constructed from high-strength aluminum and features a cross-cut design to protect your stock or Mishimoto performance oil cooler while still allowing ample airflow. It includes a corrosion-resistant black powder-coated finish and everything required for a smooth and simple installation – no cutting or modifications necessary!--As with all our products, the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate comes with our signature Mishimoto Lifetime Warranty for a lifetime of protection.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023-2024 BMW M2 Base 2021-2024 BMW M3 Base 2021-2024 BMW M3 Competition 2022-2024 BMW M3 Competition xDrive 2024 BMW M3 CS 2021-2024 BMW M4 Base 2021-2024 BMW M4 Competition 2021-2024 BMW M4 Competition xDrive 2023-2024 BMW M4 CSL

Mishimoto Oil Line Stays add style and functionality to any engine bay.Offered in both black and gold, the Mishimoto Oil Line Stay will fit all rubber or stainless steel -10AN lines.Oil Line Stays are a great way to prevent your lines from rubbing and are a perfect addition to any oil cooler kit or custom setup.Mishimoto Oil Line Stays are crafted from high quality 6061 aluminum and feature a two piece design for ease of installation.A Mishimoto Oil Line Stay is a safe bet for the protection of your lines and includes the Mishimoto lifetime warranty.

Mishimoto Oil Line Stays add style and functionality to any engine bay.Offered in both black and gold, the Mishimoto Oil Line Stay will fit all rubber or stainless steel -10AN lines.Oil Line Stays are a great way to prevent your lines from rubbing and are a perfect addition to any oil cooler kit or custom setup.Mishimoto Oil Line Stays are crafted from high quality 6061 aluminum and feature a two piece design for ease of installation.A Mishimoto Oil Line Stay is a safe bet for the protection of your lines and includes the Mishimoto lifetime warranty.

The Mazda RX8 has a high-winding rotary engine capable of easy reaching 9,000RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine's oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. This full kit from Mishimoto replaced all oil lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With the Mishimoto replacement oil line kit, all oil lines between the engine, and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. The oil line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep you RX8 protected and running smooth! As with all our products, this kit includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

The Mazda RX8 has a high-winding rotary engine capable of easy reaching 9,000RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine's oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. The most frequent line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it's replaced with a full braided stainless steel oil line and aluminum M18 -- 10AN banjo fittings that will not corrode or break down over time. The oil line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep you RX8 protected and running smooth! As with all our products, this kit includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2008 Mazda RX-8 40th Anniversary Edition 2004-2007 Mazda RX-8 Base 2008-2011 Mazda RX-8 Grand Touring 2009-2011 Mazda RX-8 R3 2005 Mazda RX-8 Shinka 2008-2011 Mazda RX-8 Sport 2008-2009 Mazda RX-8 Touring

Add some flexibility to your S55's oil cooling system with the Mishimoto Oil Cooler Line Kit for the 2015-2020 BMW F8X M3, M4, and M2 Competition. These M cars are equipped with a set of unforgiving hardlines routing from the cooler to the oil pump from the factory. These lines are prone to corrosion and abrasion over time, leading to leaks and improper lubrication of your mighty S55. The Mishimoto kit allows you to replace these factory lines with a set of application-specific, robust nylon braided hoses, complete with -10AN fittings, that are ready to stand up to the harsh conditions found under the hood of your Bimmer. Our kit also includes all of the necessary hardware to adapt these lines to your BMW. First, our oil line fitting kit adapts the oil pump housing for the use of -10AN fittings with our blue anodized, full aluminum adaptors. Also, we also include a second pair of adaptors that allow our new lines to attach to either the stock oil cooler or the Mishimoto bar-and-plate oil cooler securely. The Mishimoto Nylon Braided Oil Cooler Line Kit for you F8X M cars is available in a stealthy black to retain an OEM+ look under the hood and includes the Mishimoto Lifetime Warranty for a worry-free installation.This Part Fits: Year Make Model Submodel 2016-2018 BMW M2 Base 2019-2021 BMW M2 Competition 2020 BMW M2 CS 2015-2018 BMW M3 Base 2015-2020 BMW M4 Base 2019-2020 BMW M4 CS 2016 BMW M4 GTS

Extremely durable and flexible, this Mishimoto Braided Line is an ideal addition to your vehicle. Whether you’re replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application.These Mishimoto -AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket of this line adds unique style to your project. The available nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces.Our braided -AN lines feature an operating temperature range from -40°F to 300°F and pressure rating of up to 1,000 PSI, making them applicable for most fluids or air passage systems on your vehicle. As with all our products, this Mishimoto Stainless-Steel Braided Line is covered by our Lifetime Warranty.

Extremely durable and flexible, this Mishimoto Braided Line is an ideal addition to your vehicle. Whether you’re replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application.These Mishimoto -AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket of this line adds unique style to your project. The available nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces.Our braided -AN lines feature an operating temperature range from -40°F to 300°F and pressure rating of up to 1,000 PSI, making them applicable for most fluids or air passage systems on your vehicle. As with all our products, this Mishimoto Stainless-Steel Braided Line is covered by our Lifetime Warranty.

Extremely durable and flexible, this Mishimoto Braided Line is an ideal addition to your vehicle. Whether you’re replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application.These Mishimoto -AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket of this line adds unique style to your project. The available nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces.Our braided -AN lines feature an operating temperature range from -40°F to 300°F and pressure rating of up to 1,000 PSI, making them applicable for most fluids or air passage systems on your vehicle. As with all our products, this Mishimoto Stainless-Steel Braided Line is covered by our Lifetime Warranty.

Extremely durable and flexible, this Mishimoto Braided Line is an ideal addition to your vehicle. Whether you’re replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application.These Mishimoto -AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket of this line adds unique style to your project. The available nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces.Our braided -AN lines feature an operating temperature range from -40°F to 300°F and pressure rating of up to 1,000 PSI, making them applicable for most fluids or air passage systems on your vehicle. As with all our products, this Mishimoto Stainless-Steel Braided Line is covered by our Lifetime Warranty.

Light and flexible, the Mishimoto'stainless Steel Braided Hose is the perfect complement to your oil cooling system and engine bay.The stainless steel construction not only adds to the look of your engine bay, but also prevents corrosion and abrasion.Each light weight hose comes pre-assembled with one 90 degree swivel -10AN fitting and one straight swivel -10AN fitting.With an operating temperature range from -40 degrees F to +300 degrees F and a maximum PSI of 750PSI, you can trust that this hose can wIt'stand the high temperatures that come with performance vehicles, on or off the track.The Mishimoto'stainless Steel Braided Hose can also be used for fuel, oil, vacuum, and water line applications, and is covered by a Lifetime Warranty.

Light and flexible, the Mishimoto Stainless-Steel Braided Hose is the perfect complement to your oil cooling system and engine bay. The stainless-steel construction not only adds to the look of your engine bay, but also prevents corrosion and abrasion. Each light weight hose comes pre-assembled with one 90 degree swivel -10AN fitting and one straight swivel -10AN fitting. With an operating temperature range from -40 degrees F to +300 degrees F and a maximum PSI of 750PSI, you can trust that this hose can withstand the high temperatures that come with performance vehicles, on or off the track. The Mishimoto Stainless-Steel Braided Hose can also be used for fuel, oil, vacuum, and water line applications, and is covered by a Lifetime Warranty.

Light and flexible, the Mishimoto'stainless Steel Braided Hose is the perfect complement to your oil cooling system and engine bay.The stainless steel construction not only adds to the look of your engine bay, but also prevents corrosion and abrasion.Each light weight hose comes pre-assembled with one 90 degree swivel -10AN fitting and one straight swivel -10AN fitting.With an operating temperature range from -40 degrees F to +300 degrees F and a maximum PSI of 750PSI, you can trust that this hose can wIt'stand the high temperatures that come with performance vehicles, on or off the track.The Mishimoto'stainless Steel Braided Hose can also be used for fuel, oil, vacuum, and water line applications, and is covered by a Lifetime Warranty.

Light and flexible, the Mishimoto'stainless Steel Braided Hose is the perfect complement to your oil cooling system and engine bay.The stainless steel construction not only adds to the look of your engine bay, but also prevents corrosion and abrasion.Each light weight hose comes pre-assembled with one 90 degree swivel -10AN fitting and one straight swivel -10AN fitting.With an operating temperature range from -40 degrees F to +300 degrees F and a maximum PSI of 750PSI, you can trust that this hose can wIt'stand the high temperatures that come with performance vehicles, on or off the track.The Mishimoto'stainless Steel Braided Hose can also be used for fuel, oil, vacuum, and water line applications, and is covered by a Lifetime Warranty.

Mishimoto PTFE Braided -8AN 6ft Hose Black

Mishimoto PTFE Braided -8AN 3ft Hose Black

Mishimoto PTFE Braided -6AN 6ft Hose Stainless

Mishimoto PTFE Braided -6AN 6ft Hose Black

Extremely durable and flexible, this Mishimoto Braided Line is an ideal addition to your vehicle. Whether you’re replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application.These Mishimoto -AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket of this line adds unique style to your project. The available nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces.Our braided -AN lines feature an operating temperature range from -40°F to 300°F and pressure rating of up to 1,000 PSI, making them applicable for most fluids or air passage systems on your vehicle. As with all our products, this Mishimoto Stainless-Steel Braided Line is covered by our Lifetime Warranty.

Mishimoto PTFE Braided -6AN 3ft Hose Stainless

Mishimoto PTFE Braided -6AN 3ft Hose Black

Extremely durable and flexible, this Mishimoto Braided Line is an ideal addition to your vehicle. Whether you’re replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application.These Mishimoto -AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket of this line adds unique style to your project. The available nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces.Our braided -AN lines feature an operating temperature range from -40°F to 300°F and pressure rating of up to 1,000 PSI, making them applicable for most fluids or air passage systems on your vehicle. As with all our products, this Mishimoto Stainless-Steel Braided Line is covered by our Lifetime Warranty.

Extremely durable and flexible, this Mishimoto Braided Line is an ideal addition to your vehicle. Whether you’re replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application.These Mishimoto -AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket of this line adds unique style to your project. The available nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces.Our braided -AN lines feature an operating temperature range from -40°F to 300°F and pressure rating of up to 1,000 PSI, making them applicable for most fluids or air passage systems on your vehicle. As with all our products, this Mishimoto Stainless-Steel Braided Line is covered by our Lifetime Warranty.

The Mishimoto 2015-2021 Subaru WRX Performance Aluminum Radiator is designed and engineered to reduce coolant temperatures by +20 Degrees Fahrenheit (+11 Degrees Celsius ), maximize cooling efficiency by up to 15-percent, and most importantly to protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator, whether you drive your vehicle daily or take it for track runs. The Mishimoto 2015+ Subaru WRX radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. The engineers at Mishimoto designed this radiator with a 117-percent increase in coolant capacity, 42-percent increase in coolant surface area, and 34-percent increase in air surface area, making it an ideal upgrade to keep your new FA20-DIT running cool! Every Mishimoto aluminum radiator is a direct stock fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a Mishimoto 1.3 Bar High-Pressure Radiator Cap and the Mishimoto Lifetime Warranty, including accident protection.This Part Fits: Year Make Model Submodel 2015-2021 Subaru WRX Base 2015-2021 Subaru WRX Limited 2015-2021 Subaru WRX Premium

Nissan has a legacy for building high-performance tuner icons like the Skyline and Z-cars, but with the introduction of the Titan in 2004, Nissan threw its hat into the full-size pickup ring. Powered by the 5.6L VK56 V8, the Titan quickly developed a reputation for being a reliable workhorse that could easily keep up with the likes of Ford and Chevy. But, after almost two decades of life as a work truck, or just daily driving, even the most reliable truck is going to show its age and require some maintenance. Your Titan's cooling system is essential to maintaining its reliability, but after thousands of heating and cooling cycles, your radiator has probably seen better days. The stock Titan radiator's plastic end tanks are prone to becoming brittle over time, leading to leaks that can leave you stranded on the job site or side of the road. Even worse, the fragile in-tank transmission cooler can crack at the fittings, leading to coolant in your transmission fluid and catastrophic transmission failure. Mishimoto has created an all-aluminum performance radiator for your 2004-2010 Nissan Titan to prevent these issues and give the Titan a boost in cooling performance. Our radiator features a 2-row core that's 38% thicker than stock with a 37% increase in core volume for improved heat transfer and cooling capacity. The end tanks of the Mishimoto radiator are made from aircraft-grade aluminum that's precision TIG-welded for maximum durability and pressure tolerance. We've also CNC-machined the transmission cooler fittings and made them integral to the lower tank to ensure they never loosen or break, protecting your transmission. Like all Mishimoto radiators, this 2004-2010 Nissan Titan performance aluminum radiator carries our Mishimoto Lifetime Warranty for a lifetime of reliability.This Part Fits: Year Make Model Submodel 2004-2013 INFINITI QX56 Base 2005-2009 Nissan Armada LE 2010-2014 Nissan Armada Platinum 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2014 Nissan Armada SL 2011-2014 Nissan Armada SV 2010 Nissan Armada Titanium 2004-2010 Nissan TITAN LE 2008-2014 Nissan TITAN PRO-4X 2011-2014 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2014 Nissan TITAN SL 2011-2014 Nissan TITAN SV 2004-2010 Nissan TITAN XE

2009 Subaru Forester XT 2.5 Liter TZ1B8, 2009-2010 Subaru Forester XT Limited 2.5 Liter TZ1B8, 2010-2013 Subaru Forester XT Premium 2.5 Liter TZ1B8, 2011-2013 Subaru Forester XT Touring 2.5 Liter TZ1B8, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008 Subaru Impreza WRX 2.5 Liter TZ1B8, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2005-2006 Subaru Legacy GT 2.5 Liter TG5C7, 2005-2006 Subaru Legacy GT 2.5 Liter TY757, 2005 Subaru Legacy GT Limited 2.5 Liter TG5C7, 2007 Subaru Legacy GT Limited 2.5 Liter TG5C7, 2008-2009 Subaru Legacy GT Limited 2.5 Liter TG5D7, 2005 Subaru Legacy GT Limited 2.5 Liter TY757, 2007 Subaru Legacy GT Limited 2.5 Liter TY757, 2008-2009 Subaru Legacy GT Limited 2.5 Liter TY758, 2005-2006 Subaru Outback XT 2.5 Liter TG5C7, 2005-2006 Subaru Outback XT 2.5 Liter TY757, 2005 Subaru Outback XT Limited 2.5 Liter TG5C7, 2007 Subaru Outback XT Limited 2.5 Liter TG5C7, 2008-2009 Subaru Outback XT Limited 2.5 Liter TG5D7, 2005 Subaru Outback XT Limited 2.5 Liter TY757, 2007 Subaru Outback XT Limited 2.5 Liter TY757, 2008-2009 Subaru Outback XT Limited 2.5 Liter TY758This Part Fits: Year Make Model Submodel 2009 Subaru Forester XT 2009-2010 Subaru Forester XT Limited 2010-2013 Subaru Forester XT Premium 2011-2013 Subaru Forester XT Touring 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2005-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005-2006 Subaru Outback XT 2005-2009 Subaru Outback XT Limited

2009 Subaru Forester XT 2.5 Liter TZ1B8, 2009-2010 Subaru Forester XT Limited 2.5 Liter TZ1B8, 2010-2013 Subaru Forester XT Premium 2.5 Liter TZ1B8, 2011-2013 Subaru Forester XT Touring 2.5 Liter TZ1B8, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008 Subaru Impreza WRX 2.5 Liter TZ1B8, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2005-2006 Subaru Legacy GT 2.5 Liter TG5C7, 2005-2006 Subaru Legacy GT 2.5 Liter TY757, 2005 Subaru Legacy GT Limited 2.5 Liter TG5C7, 2007 Subaru Legacy GT Limited 2.5 Liter TG5C7, 2008-2009 Subaru Legacy GT Limited 2.5 Liter TG5D7, 2005 Subaru Legacy GT Limited 2.5 Liter TY757, 2007 Subaru Legacy GT Limited 2.5 Liter TY757, 2008-2009 Subaru Legacy GT Limited 2.5 Liter TY758, 2005-2006 Subaru Outback XT 2.5 Liter TG5C7, 2005-2006 Subaru Outback XT 2.5 Liter TY757, 2005 Subaru Outback XT Limited 2.5 Liter TG5C7, 2007 Subaru Outback XT Limited 2.5 Liter TG5C7, 2008-2009 Subaru Outback XT Limited 2.5 Liter TG5D7, 2005 Subaru Outback XT Limited 2.5 Liter TY757, 2007 Subaru Outback XT Limited 2.5 Liter TY757, 2008-2009 Subaru Outback XT Limited 2.5 Liter TY758This Part Fits: Year Make Model Submodel 2009 Subaru Forester XT 2009-2010 Subaru Forester XT Limited 2010-2013 Subaru Forester XT Premium 2011-2013 Subaru Forester XT Touring 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2005-2006 Subaru Legacy GT 2005,2007-2009 Subaru Legacy GT Limited 2006-2009 Subaru Legacy GT spec.B 2005-2006 Subaru Outback XT 2005-2009 Subaru Outback XT Limited

Add some additional reliability and engine bay styling with the Mishimoto Subaru WRX/STI Aluminum Coolant Expansion Tank. Stock coolant expansion tanks are prone to failure after years of constant temperature variations. The Mishimoto tank is constructed from durable, TIG-welded aluminum with barbed fittings for optimal durability and longevity. This expansion tank provides a 50-percent increase in capacity compared to the stock unit. It features a polished silver or anodized black finish that will look great in your engine bay, and it and matches the Mishimoto Performance Aluminum Radiator! The Mishimoto Coolant Expansion Tank is engineered for perfect fitment in the 2002-2007 WRX and the 2004-2016 STI! As with all our products, this expansion tank includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2005-2006 Saab 9-2X Aero 2004-2006 Subaru Baja Turbo 2008 Subaru Forester Sports 2.5 XT 2004-2005 Subaru Forester XT 2006-2008 Subaru Forester XT Limited 2005 Subaru Forester XT Premium 2002-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004-2014 Subaru Impreza WRX STI 2007,2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition 2006-2007 Subaru Impreza WRX TR 2015-2016 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2016 Subaru WRX STI Limited

Add some additional reliability and engine bay styling with the Mishimoto Subaru WRX/STI Aluminum Coolant Expansion Tank. Stock coolant expansion tanks are prone to failure after years of constant temperature variations. The Mishimoto tank is constructed from durable, TIG-welded aluminum with barbed fittings for optimal durability and longevity. This expansion tank provides a 50-percent increase in capacity compared to the stock unit. It features a polished silver or anodized black finish that will look great in your engine bay, and it and matches the Mishimoto Performance Aluminum Radiator! The Mishimoto Coolant Expansion Tank is engineered for perfect fitment in the 2002-2007 WRX and the 2004-2016 STI! As with all our products, this expansion tank includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.This Part Fits: Year Make Model Submodel 2005-2006 Saab 9-2X Aero 2004-2006 Subaru Baja Turbo 2008 Subaru Forester Sports 2.5 XT 2004-2005 Subaru Forester XT 2006-2008 Subaru Forester XT Limited 2005 Subaru Forester XT Premium 2002-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004-2014 Subaru Impreza WRX STI 2007,2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition 2006-2007 Subaru Impreza WRX TR 2015-2016 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2016 Subaru WRX STI Limited

Get that plastic blob of an overflow tank out of your engine bay. Stock plastic tanks are prone to failure due to repeated hot and cold cycles, and they create a horrible eyesore as they lurk in your engine bay. Mishimoto's 2008+ STI / WRX coolant overflow tank is constructed from durable, TIG-welded aluminum for optimal durability and longevity. Included with this STI / WRX coolant overflow tank is a CNC-machined dipstick to allow for easy checking of coolant levels. With the choice of two finishes, polished and anodized black, this tank will have no problem matching the style of your engine bay. This STI / WRX coolant overflow tank fits perfectly with the stock or Mishimoto STI / WRX radiators. As with all Mishimoto STI and WRX parts, this overflow tank includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition 2015-2016 Subaru WRX Base 2015-2016 Subaru WRX Limited 2015-2016 Subaru WRX Premium 2015-2016 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2016 Subaru WRX STI Limited 2016 Subaru WRX STI Series.HyperBlue

Get that plastic blob of an overflow tank out of your engine bay. Stock plastic tanks are prone to failure due to repeated hot and cold cycles, and they create a horrible eyesore as they lurk in your engine bay. Mishimoto's 2008+ STI / WRX coolant overflow tank is constructed from durable, TIG-welded aluminum for optimal durability and longevity. Included with this STI / WRX coolant overflow tank is a CNC-machined dipstick to allow for easy checking of coolant levels. With the choice of two finishes, polished and anodized black, this tank will have no problem matching the style of your engine bay. This STI / WRX coolant overflow tank fits perfectly with the stock or Mishimoto STI / WRX radiators. As with all Mishimoto STI and WRX parts, this overflow tank includes the Mishimoto Lifetime Warranty.This Part Fits: Year Make Model Submodel 2008-2014 Subaru Impreza WRX 2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2008-2014 Subaru Impreza WRX STI 2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition 2015-2016 Subaru WRX Base 2015-2016 Subaru WRX Limited 2015-2016 Subaru WRX Premium 2015-2016 Subaru WRX STI Base 2015 Subaru WRX STI Launch Edition 2015-2016 Subaru WRX STI Limited 2016 Subaru WRX STI Series.HyperBlue

Dodge and Chrysler have carefully crafted the 2015+ 6.4L Dodge Charger, Challenger, and their 6.2L Hellcat variants with imposing exteriors that live up to their namesakes. One would expect the same attention to detail under the hood and, for the most part, it all adds up - except one part: the factory expansion tank. Sticking out like a sore thumb, the dull yellow reservoir for your Mopar's coolant ends the envy brought on by the exterior. Looks aside, these plastic tanks are notorious for degrading and leaking over time.----We here at Mishimoto are determined to inject some style into the engine bay of your Mopar with the Mishimoto 2015+ Dodge Charger/Challenger and Hellcat Aluminum Expansion Tank. We have eliminated the dingy beige plastic of the stock tank and replaced it with TIG-welded aluminum, exponentially improving the expansion tank's aesthetics and durability. We also ditched the need for a sight glass or tube by incorporating a cold-fill line within the internal baffling, keeping the sleek exterior design of our tank unblemished.----The Mishimoto 2015+ Dodge Charger/Challenger 6.4L/6.2L Hellcat Expansion Tank is available in a micro-wrinkle black or natural finish. The natural finish is easy to make match any color scheme through powder coating or hydro dipping. Our expansion tank includes the Mishimoto Lifetime Warranty, which ensures you'll never again have to see the eyesore that is the stock plastic expansion tank.This Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2019 Dodge Challenger R/T 392 2016-2023 Dodge Challenger R/T Scat Pack 2021 Dodge Challenger R/T Scat Pack Shaker Widebody 2019-2023 Dodge Challenger R/T Scat Pack Widebody 2015 Dodge Challenger Scat Pack 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2022 Dodge Challenger SRT Hellcat 2023 Dodge Challenger SRT Hellcat Jailbreak 2019-2022 Dodge Challenger SRT Hellcat Redeye 2023 Dodge Challenger SRT Hellcat Redeye Jailbreak 2019-2022 Dodge Challenger SRT Hellcat Redeye Widebody 2023 Dodge Challenger SRT Hellcat Redeye Widebody Jailbreak 2018-2022 Dodge Challenger SRT Hellcat Widebody 2023 Dodge Challenger SRT Hellcat Widebody Jailbreak 2022 Dodge Challenger SRT Jailbreak 2020-2023 Dodge Challenger SRT Super Stock 2017-2018 Dodge Challenger T/A 392 2021 Dodge Challenger T/A 392 Widebody 2017-2018 Dodge Charger Daytona 392 2017-2018 Dodge Charger R/T 392 2015-2018 Dodge Charger R/T Scat Pack 2019-2023 Dodge Charger Scat Pack 2020 Dodge Charger Scat Pack 392 Widebody 2022 Dodge Charger Scat Pack Widebody 2015-2018 Dodge Charger SRT 392 2015-2020 Dodge Charger SRT Hellcat 2020-2023 Dodge Charger SRT Hellcat Widebody