HPS Red intercooler charge pipe hot side is a simple yet effective performance upgrade for 2018 Lexus NX300 2.0L Turbo oem restrictive plastic intercooler piping. Made from lightweight mandrel bent aluminum tubing, the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +15 Whp , torque +19 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2018 Lexus NX300 2.0L Turbo. Simple but effective performance upgrade. Does NOT require re-tuning or modification. Dyno proven performance - increase +15 Whp horsepower, +19 Ft/lbs torque. Reduce turbo lag and improve throttle response. Light weight mandrel-bent aluminum alloy piping replaces the OEM stock restrictive plastic tube. Bead rolled pipe ends prevent couplers from popping off under boost. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044883151 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 3 lb

HPS polish intercooler charge pipe hot side is a simple yet effective performance upgrade for 2018 Lexus NX300 2.0L Turbo oem restrictive plastic intercooler piping. Made from lightweight mandrel bent aluminum tubing, the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +15 Whp , torque +19 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2018 Lexus NX300 2.0L Turbo. Simple but effective performance upgrade. Does NOT require re-tuning or modification. Dyno proven performance - increase +15 Whp horsepower, +19 Ft/lbs torque. Reduce turbo lag and improve throttle response. Light weight mandrel-bent aluminum alloy piping replaces the OEM stock restrictive plastic tube. Bead rolled pipe ends prevent couplers from popping off under boost. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880341 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 3 lb

HPS Blue intercooler charge pipe hot side is a simple yet effective performance upgrade for 2018 Lexus NX300 2.0L Turbo oem restrictive plastic intercooler piping. Made from lightweight mandrel bent aluminum tubing, the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +15 Whp , torque +19 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2018 Lexus NX300 2.0L Turbo. Simple but effective performance upgrade. Does NOT require re-tuning or modification. Dyno proven performance - increase +15 Whp horsepower, +19 Ft/lbs torque. Reduce turbo lag and improve throttle response. Light weight mandrel-bent aluminum alloy piping replaces the OEM stock restrictive plastic tube. Bead rolled pipe ends prevent couplers from popping off under boost. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044883144 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 3 lb

The HPS Performance black 3" intake charge pipe for the BMW N55B30 engine was designed with one goal in mind, reliability. From our initial analysis on our 2011 BMW 335i test vehicle, we found that the factory charge pipe was manufactured with inferior materials. In just 60k miles, the BMW factory charge pipe began showing its age, with it barely hanging on as the throttle body connector flange had been broken. HPS R&D team reverse engineered the original part to offer a product that ticks all of the boxes; Durability, Performance, and Style. The HPS charge pipe is produced from 6063 aluminum with a billet CNC flange built to last. It has HPS signature high temperature 4-ply reinforced silicone coupler and heavy duty 100% stainless steel T-bolt clamps to connect to the intermediate intercooler pipe. The kit includes a brand new O-ring for the throttle body connector as the original equipment is known to deteriorate over time. HPS turbo charge pipe also includes a 1/8" NPT bung to give you the option of running methanol injection or boost gauges (even nitrous systems). Installation can be completed in under 30 minutes with basic hand tools and does not require permanent modification or ECU reflash. Don?t end up stranded with a broken charge pipe. Replace your old and haggard plastic charge pipe with the HPS Performance Charge Pipe for your N55 powered E8x/E9x vehicle. NOT CARB Complaint. Fits 2013-2015 BMW X1 xDrive35i 3.0L Turbo (N55). Replaces the weak and restrictive factory plastic charge pipe. Does NOT require re-tuning or modification. Includes a new throttle body connector O-ring, HPS high temp 4-ply reinforced silicone coupler and 100% stainless steel t-bolt clamps. 3" mandrel bent 6061 Aluminum tubing with CNC machined billet flange and 1/8" NPT bung for methanol injection, sensors, and nitrous systems Increased air volume and air flow. Reduce turbo lag and improve throttle response. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044883212 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 4 lb

The HPS Performance polish 3" intake charge pipe for the BMW N55B30 engine was designed with one goal in mind, reliability. From our initial analysis on our 2011 BMW 335i test vehicle, we found that the factory charge pipe was manufactured with inferior materials. In just 60k miles, the BMW factory charge pipe began showing its age, with it barely hanging on as the throttle body connector flange had been broken. HPS R&D team reverse engineered the original part to offer a product that ticks all of the boxes; Durability, Performance, and Style. The HPS charge pipe is produced from 6063 aluminum with a billet CNC flange built to last. It has HPS signature high temperature 4-ply reinforced silicone coupler and heavy duty 100% stainless steel T-bolt clamps to connect to the intermediate intercooler pipe. The kit includes a brand new O-ring for the throttle body connector as the original equipment is known to deteriorate over time. HPS turbo charge pipe also includes a 1/8" NPT bung to give you the option of running methanol injection or boost gauges (even nitrous systems). Installation can be completed in under 30 minutes with basic hand tools and does not require permanent modification or ECU reflash. Don?t end up stranded with a broken charge pipe. Replace your old and haggard plastic charge pipe with the HPS Performance Charge Pipe for your N55 powered E8x/E9x vehicle. NOT CARB Complaint. Fits 2013-2015 BMW X1 xDrive35i 3.0L Turbo (N55). Includes a new throttle body connector O-ring, HPS high temp 4-ply reinforced silicone coupler and 100% stainless steel t-bolt clamps. 3" mandrel bent 6061 Aluminum tubing with CNC machined billet flange and 1/8" NPT bung for methanol injection, sensors, and nitrous systems Increased air volume and air flow. Reduce turbo lag and improve throttle response. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Replaces the weak and restrictive factory plastic charge pipe. Does NOT require re-tuning or modification. Attributes: GTIN: 00648044883205 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 4 lb

HPS Black Intercooler Pipe 17-106WB is a direct replacement for 13-17 Hyundai Veloster 1.6L Turbo factory intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits 2013-2017 Hyundai Veloster 1.6L Turbo. Compatible with factory intercooler or aftermarket intercooler with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044892481 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Red Intercooler Pipe 17-106R is a direct replacement for 13-17 Hyundai Veloster 1.6L Turbo factory intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits 2013-2017 Hyundai Veloster 1.6L Turbo. Compatible with factory intercooler or aftermarket intercooler with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044892504 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Polish Intercooler Pipe 17-106P is a direct replacement for 13-17 Hyundai Veloster 1.6L Turbo factory intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 1-3/4? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits 2013-2017 Hyundai Veloster 1.6L Turbo. Compatible with factory intercooler or aftermarket intercooler with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044892474 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Blue Intercooler Pipe 17-106BL is a direct replacement for 13-17 Hyundai Veloster 1.6L Turbo factory intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits 2013-2017 Hyundai Veloster 1.6L Turbo. Compatible with factory intercooler or aftermarket intercooler with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044892498 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The late 2003-2007 Ford F-series super-duty trucks came equipped with a 6.0L Powerstroke diesel engine making them a powerhouse and great work trucks. However, they have some shortcomings that gave these engines a bad reputation. We brought in two different models of these trucks to dissect and investigate the issues. What we came up with is our upgraded 6061 aluminum HPS Cold Side and Hot Side Charge Pipe Kit that addresses the weak links in the charge air system. Unique mounting brace design on the hot side for added structural rigidity to the Hot Side pipe. Mandrel bent 6061 aluminum tubing increase air volume and air flow. Upgrade 05-07 model factory plastic charge pipe. Includes HPS 4-ply aramid reinforced fluoro-lined silicone couplers for excellent oil resistance minimizing premature failure (Maximum temperature rating: 500F). Spring-Loaded T-Bolt Clamps. Industrial grade constant tension clamps eliminate the need for maintenance in fluctuating temperature conditions. Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process. No modification is required during the installation. Color: Red. NOT CARB Complaint. Fits 2003-2007 Ford F-250 / F-550 / F-550 / F-550 Superduty Pickup 6.0L V8 Diesel Turbo Upgrade 2005-2007 model restrictive factory plastic charge pipe. Does NOT require re-tuning or modification. Unique mounting brace design on the hot side for added structural rigidity to the Hot Side pipe HPS 4-ply aramid reinforced fluoro-lined silicone couplers for excellent oil resistance minimizing premature failure Spring-Loaded T-Bolt Clamps. Industrial grade constant tension clamps eliminate the need for maintenance in fluctuating temperature conditions. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044883755 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 10 lb

The late 2003-2007 Ford F-series super-duty trucks came equipped with a 6.0L Powerstroke diesel engine making them a powerhouse and great work trucks. However, they have some shortcomings that gave these engines a bad reputation. We brought in two different models of these trucks to dissect and investigate the issues. What we came up with is our upgraded 6061 aluminum HPS Cold Side and Hot Side Charge Pipe Kit that addresses the weak links in the charge air system. Unique mounting brace design on the hot side for added structural rigidity to the Hot Side pipe. Mandrel bent 6061 aluminum tubing increase air volume and air flow. Upgrade 05-07 model factory plastic charge pipe. Includes HPS 4-ply aramid reinforced fluoro-lined silicone couplers for excellent oil resistance minimizing premature failure (Maximum temperature rating: 500F). Spring-Loaded T-Bolt Clamps. Industrial grade constant tension clamps eliminate the need for maintenance in fluctuating temperature conditions. Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process. No modification is required during the installation. Color: Polish. NOT CARB Complaint. Fits 2003-2007 Ford F-250 / F-550 / F-550 / F-550 Superduty Pickup 6.0L V8 Diesel Turbo Upgrade 2005-2007 model restrictive factory plastic charge pipe. Does NOT require re-tuning or modification. Unique mounting brace design on the hot side for added structural rigidity to the Hot Side pipe. HPS 4-ply aramid reinforced fluoro-lined silicone couplers for excellent oil resistance minimizing premature failure Spring-Loaded T-Bolt Clamps. Industrial grade constant tension clamps eliminate the need for maintenance in fluctuating temperature conditions. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044883724 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 10 lb

HPS black intercooler pipe complete Kit (Hot and Cold Side) with high temp 4-ply reinforced silicone hoses is a direct replacement for 2016-2018 Focus RS 2.3L Turbo oem intercooler pipings and rubber hoses. Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT and COLD side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler piping kit optimize and smooth out the air flow, improve throttle response without re-tuning the ECU. Fits 2016-2018 Ford Focus RS 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing the factory oem piping. Replace both hot side and cold side stock plastic intercooler piping. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler pipes. Improves throttle response and drivability with straight through 2-1/2" mandrel-bent aluminum tubing. Increases overall internal volume of your turbocharger system and eliminates air flow restrictions. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880242 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 36 x 12 x 12 inches Weight: 9 lb

HPS Black Upper Intercooler Pipe (UICP) is a direct replacement for Lancer EVO X factory upper intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits Mitsubishi Evolution 10 GSR and MR Models (USDM, JDM and European). Compatible with all aftermarket intercoolers with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with all aftermarket intercoolers with factory outlet angle. Attributes: GTIN: 00648044861319 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Red Upper Intercooler Pipe (UICP) is a direct replacement for Lancer EVO X factory upper intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits Mitsubishi Evolution 10 GSR and MR Models (USDM, JDM and European). Compatible with all aftermarket intercoolers with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with all aftermarket intercoolers with factory outlet angle. Attributes: GTIN: 00648044861302 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Polish Upper Intercooler Pipe (UICP) is a direct replacement for Lancer EVO X factory upper intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits Mitsubishi Evolution 10 GSR and MR Models (USDM, JDM and European). Compatible with all aftermarket intercoolers with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with all aftermarket intercoolers with factory outlet angle. Attributes: GTIN: 00648044861296 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Blue Upper Intercooler Pipe (UICP) is a direct replacement for Lancer EVO X factory upper intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits Mitsubishi Evolution 10 GSR and MR Models (USDM, JDM and European). Compatible with all aftermarket intercoolers with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with all aftermarket intercoolers with factory outlet angle. Attributes: GTIN: 00648044861289 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Wrinkle Red Upper Intercooler Pipe (UICP) is a direct replacement for Lancer EVO X factory upper intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits Mitsubishi Evolution 10 GSR and MR Models (USDM, JDM and European). Compatible with all aftermarket intercoolers with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with all aftermarket intercoolers with factory outlet angle. Attributes: GTIN: 00648044861326 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

HPS Black Intercooler Pipe Complete Kit (Hot and Cold Side) with black high temp 4-ply reinforced silicone hoses is a direct replacement for 2015-2017 Mustang Ecoboost 2.3L Turbo oem intercooler pipings and rubber hoses. Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced black silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2015-2017 Ford Mustang Ecoboost 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing the factory oem piping. Deliver dyno proven performance gains increase 17.1 Whp horsepower, 16.9 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping (Hot and Cold Side). Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044861364 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

HPS Polish Intercooler Pipe Complete Kit (Hot and Cold Side) with black high temp 4-ply reinforced silicone hoses is a direct replacement for 2015-2017 Mustang Ecoboost 2.3L Turbo oem intercooler pipings and rubber hoses. Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced black silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2015-2017 Ford Mustang Ecoboost 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing the factory oem piping. Deliver dyno proven performance gains increase 17.1 Whp horsepower, 16.9 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping (Hot and Cold Side). Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044861357 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Deliver dyno proven performance gains increase 17.1 Whp horsepower, 16.9 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping (Hot and Cold Side). Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044861340 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Deliver dyno proven performance gains increase 17.1 Whp horsepower, 16.9 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping (Hot and Cold Side). Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044861333 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 64 5pcs pack 3-9/16" - 4-1/2" (91mm-114mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 64. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-9/16" - 4-1/2" (91mm-114mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 5. Effective Diameter Range: 3-9/16" - 4-1/2" (91mm-114mm) 100% Stainless Steel; Sold in quantity of 5 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044859064 Brand Name: HPS Performance Effective Diameter Range: 91mm-114mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3-1/2" - 4" (89mm - 102mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 4 x 4 inches Weight: 0.63 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 64 2pcs pack 3-9/16" - 4-1/2" (91mm-114mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 64. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-9/16" - 4-1/2" (91mm-114mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 2. Effective Diameter Range: 3-9/16" - 4-1/2" (91mm-114mm) 100% Stainless Steel; Sold in quantity of 2 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843834 Brand Name: HPS Performance Effective Diameter Range: 91mm-114mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3-1/2" - 4" (89mm - 102mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.32 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 64 10pcs pack 3-9/16" - 4-1/2" (91mm-114mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 64. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-9/16" - 4-1/2" (91mm-114mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 10. Effective Diameter Range: 3-9/16" - 4-1/2" (91mm-114mm) 100% Stainless Steel; Sold in Box of 10 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843827 Brand Name: HPS Performance Effective Diameter Range: 91mm-114mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3-1/2" - 4" (89mm - 102mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1.19 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 60 5pcs pack 3-5/16" - 4-1/4" (84mm-108mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 60. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-5/16" - 4-1/4" (84mm-108mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 5. Effective Diameter Range: 3-5/16" - 4-1/4" (84mm-108mm) 100% Stainless Steel; Sold in quantity of 5 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044859057 Brand Name: HPS Performance Effective Diameter Range: 84mm-108mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3-1/4" - 3-3/4" (83mm - 95mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 4 x 4 inches Weight: 0.63 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 60 2pcs pack 3-5/16" - 4-1/4" (84mm-108mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 60. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-5/16" - 4-1/4" (84mm-108mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 2. Effective Diameter Range: 3-5/16" - 4-1/4" (84mm-108mm) 100% Stainless Steel; Sold in quantity of 2 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843803 Brand Name: HPS Performance Effective Diameter Range: 84mm-108mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3-1/4" - 3-3/4" (83mm - 95mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.32 lb

HPS Performance Titanium Coolant Bleed Screw HW22-1001 replaces and upgrades Mini Roadster R59 Cooper S Roadster (N18) factory bleeder plastic bleeder screw that are prone to failure. Includes chemical resistant Viton O-ring. Easy to install with 4mm allen head. A must-have upgrade for track days. Compatible with OEM Part # 11537793373, 17111712788, 17110141325 Replaces and upgrades your factory bleeder plastic bleeder screw that are prone to failure CNC Machined from Grade 5 aerospace titanium. Includes chemical resistant Viton O-ring. Easy to install with 4mm allen head. A must-have upgrade for track days. Fits Most BMW and Mini models ( OEM PN# 11537793373, 17111712788, 17110141325) Made in USA. Backed by HPS Performance Products Limited Warranty. Attributes: GTIN: 00648044890920 Brand Name: HPS Performance Color: Blue Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.3 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 60 10pcs pack 3-5/16" - 4-1/4" (84mm-108mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 60. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-5/16" - 4-1/4" (84mm-108mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 10. Effective Diameter Range: 3-5/16" - 4-1/4" (84mm-108mm) 100% Stainless Steel; Sold in Box of 10 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843797 Brand Name: HPS Performance Effective Diameter Range: 84mm-108mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3-1/4" - 3-3/4" (83mm - 95mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1.13 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 56 5pcs pack 3-1/16" - 4" (78mm-102mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 56. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-1/16" - 4" (78mm-102mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 5. Effective Diameter Range: 3-1/16" - 4" (78mm-102mm) 100% Stainless Steel; Sold in quantity of 5 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044859040 Brand Name: HPS Performance Recommend to be used on HPS Hoses with these INSIDE Diameter: 3" - 3-1/2" (76mm - 89mm) Effective Diameter Range: 78mm-102mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 4 x 4 inches Weight: 0.63 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 56 2pcs pack 3-1/16" - 4" (78mm-102mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 56. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-1/16" - 4" (78mm-102mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 2. Effective Diameter Range: 3-1/16" - 4" (78mm-102mm) 100% Stainless Steel; Sold in quantity of 2 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843773 Brand Name: HPS Performance Effective Diameter Range: 78mm-102mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3" - 3-1/2" (76mm - 89mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.32 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 56 10pcs pack 3-1/16" - 4" (78mm-102mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 56. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 3-1/16" - 4" (78mm-102mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 10. Effective Diameter Range: 3-1/16" - 4" (78mm-102mm) 100% Stainless Steel; Sold in Box of 10 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843766 Brand Name: HPS Performance Effective Diameter Range: 78mm-102mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 3" - 3-1/2" (76mm - 89mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1.13 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 52 5pcs pack 2-13/16" - 3-3/4" (71mm-95mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 52. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 2-13/16" - 3-3/4" (71mm-95mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 5. Effective Diameter Range: 2-13/16" - 3-3/4" (71mm-95mm) 100% Stainless Steel; Sold in quantity of 5 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044859033 Brand Name: HPS Performance Effective Diameter Range: 71mm-95mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 2-3/4" - 3-1/4" (70mm - 83mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.57 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 52 2pcs pack 2-13/16" - 3-3/4" (71mm-95mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 52. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 2-13/16" - 3-3/4" (71mm-95mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 2. Effective Diameter Range: 2-13/16" - 3-3/4" (71mm-95mm) 100% Stainless Steel; Sold in quantity of 2 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843742 Brand Name: HPS Performance Effective Diameter Range: 71mm-95mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 2-3/4" - 3-1/4" (70mm - 83mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.32 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 52 10pcs pack 2-13/16" - 3-3/4" (71mm-95mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 52. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 2-13/16" - 3-3/4" (71mm-95mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 10. Effective Diameter Range: 2-13/16" - 3-3/4" (71mm-95mm) 100% Stainless Steel; Sold in Box of 10 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843735 Brand Name: HPS Performance Effective Diameter Range: 71mm-95mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 2-3/4" - 3-1/4" (70mm - 83mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 4 x 4 inches Weight: 1 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 48 5pcs pack 2-9/16" - 3-1/2" (65mm-89mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 48. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 2-9/16" - 3-1/2" (65mm-89mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 5. Effective Diameter Range: 2-9/16" - 3-1/2" (65mm-89mm) 100% Stainless Steel; Sold in quantity of 5 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044859026 Brand Name: HPS Performance Effective Diameter Range: 65mm-89mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 2-1/2" - 3" (63mm - 76mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.57 lb

HPS 100% Stainless Steel Worm Gear Liner Hose Clamps SAE # 48 2pcs pack 2-9/16" - 3-1/2" (65mm-89mm) feature four piece heavy duty industrial grade quad-lock design allows more tightening torque compare to other aftermarket clamps. These HPS liner hose clamps features an inner protective sleeve which can prevent the damage of the silicone hose and delivers maximum protection and concentric seal to soft hoses. The HPS stainless steel worm gear liner hose clamps are ideal for aircraft, heavy-duty industrial applications as well as outdoor, fresh water and mildly corrosive applications. This HPS minature stainless steel clamp consist of stainless steel band, screw, saddle and housing. Technical Specification: SAE # 48. 100% Stainless Steel. 1/2 inch band. 5/16 inch (8mm) slotted hex screw. Four piece heavy duty industrial grade quad-lock design. Inner protective liner prevents the damage of the hose. Effective Diameter Range: 2-9/16" - 3-1/2" (65mm-89mm). Maximum Torque Spec: 35 in lbs. Exceeds all SAE requirements. REMARK: Sold in box of 2. Effective Diameter Range: 2-9/16" - 3-1/2" (65mm-89mm) 100% Stainless Steel; Sold in quantity of 2 Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose Maximum Torque Spec: 35 in lbs, Exceeds all SAE requirements 1/2" band , 5/16" (8mm) slotted hex screw Attributes: GTIN: 00648044843711 Brand Name: HPS Performance Effective Diameter Range: 65mm-89mm Recommend to be used on HPS Hoses with these INSIDE Diameter: 2-1/2" - 3" (63mm - 76mm) Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.32 lb