All

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. This system includes Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks. Additional Attributes: GTIN: 00674866097384 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 39 x 41.3 x 15.4 inches

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The system includes Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U-bolt system. Additional Attributes: GTIN: 00674866092594 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 34.32 x 15.4 inches

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. This system includes Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks. Additional Attributes: GTIN: 00674866097391 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 39 x 38.6 x 15.4 inches

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift options include replacement Coil Springs or our Dirt Logic 4.0 Coilover Conversion system. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The Coilover Conversion features our Dirt Logic 4.0 for maximum suspension dampening in rugged offroad conditions. The conversion system does not require elimination of the factory coil spring bucket and is a 100% bolt on installation. The vehicle specific Dirt Logic 4.0 Coilovers features a 4'' OD remote reservoir connected via -10 hose assembly and includes large billet reservoir clamps and limiting straps. As an upgrade to the Coilover Conversion we offer an optional front Dirt Logic Hydraulic Bumps Stop system that aids in compression dampening for severe offroad driving. Both systems include Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system. Additional Attributes: GTIN: 00674866026421 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 33.12 x 15.4 inches

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The system includes Trac Bar bracketry, Pitman Arm, End Link, Bump Stops, and a transmission mount with rear lift coming from a Block and U-bolt system. Additional Attributes: GTIN: 00674866092600 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 35.82 x 15.4 inches

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The system includes Trac Bar bracketry, Pitman Arm, End Link, Bump Stops, and a transmission mount with rear lift coming from a Block and U-bolt system. Additional Attributes: GTIN: 00674866026407 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 35.82 x 15.4 inches

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. This system includes Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks and rear 2.25 Dirt Logic Stainless Steel shocks. Additional Attributes: GTIN: 00674866097377 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 39 x 39.8 x 15.4 inches

Our Performance System features extended length 1.75'' OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift includes replacement Coil Springs. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad. The system includes Trac Bar bracketry, Pitman Arm, End Links, Bump Stops, and a transmission mount with rear lift coming from a Block and U-bolt system. Additional Attributes: GTIN: 00674866026384 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 34.32 x 15.4 inches

This system includes our replacement front coil springs providing increased ride height and large 1 3/4'' diameter upper and lower control links replace stock units for proper caster and increased strength. Includes front 2.5 Dirt Logic Stainless Steel coil over shocks, rear 2.25 Dirt Logic Stainless Steel shocks, Pitman Arm, Trac bar bracket, Bump Stops, and a rear block and u-bolt kit. Additional Attributes: GTIN: 00674866097353 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 32 x 33.8 x 15.4 inches

This system includes our replacement front coil springs providing increased ride height and large 1 3/4'' diameter upper and lower control links replace stock units for proper caster and increased strength. Also included is a Pitman Arm, Trac bar bracket, Bump Stops, and a rear block and u-bolt kit. Additional Attributes: GTIN: 00674866026193 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 28.32 x 15.4 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that wan Additional Attributes: GTIN: 00674866110182 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 23 x 12 x 12 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4in rear block kit (FTS22214). The 4in blocks replace the factory 2.5in blocks and will provi Additional Attributes: GTIN: 00674866110175 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.2 x 16 x 15.7 inches

Fabtech's 6in 4 Link Conversion system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This system comes with everything needed to convert to a 4 Link front suspension. The system will provide less caster change throughout the travel range which benefits on road driving. Offroad the 4 Link system will provide more articulation than a Radius Arm for increased terrain traversing at all speeds. Fabtech's 4 Link System has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly design suspension geometry is the pinnacle of Super Duty suspension systems. Each Fabtech component is expertly built in house and has specific design features and benefits as listed below. FEATURES: LINK ARMS & BRACKETS - 2in OD Heavy wall link arms have 1/4in thick steel brackets at the axle with adjustable alignment cams and Fabtech's legendary 5 Ton joints to pivot at the frame for an extended service life. The 5 Ton joints have been proven in military use for over 10 years and are quiet and strong. The 4 Link Arms attach to stout 1/4in thick steel frame brackets for a solid mounting of the new suspension. The geometry of the 4 Link arms and frame brackets has been designed to provide an improved highway ride due to reduced caster change and able to tackle rough offroad conditions better than a Radius Arm suspension. COIL SPRINGS - American made coil springs have been designed for a very compliant ride quality both on and offroad. Each coil is preset during the manufacturing process to insure no ride height settling over time. Allows for a 2in increase in wheel travel over stock when used with Fabtech shock absorbers. TRACK BAR BRACKET - 1/4in thick steel bracketry rep-ositions the factory track bar to center the axle u Additional Attributes: GTIN: 00674866109230 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 45.5 x 47.56 x 14.5 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit comes with Dirt Logic 2.25 shocks. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. They will provide a superior ride quality both on and offroad with excellent damping for offroad use. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want Additional Attributes: GTIN: 00674866110151 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 39 x 29 x 15.7 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Stealth shocks. They are a sealed monotube shock that has a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They will provide a great highway ride with good offroad damping capacity. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want to retain more of the factory nose-down Additional Attributes: GTIN: 00674866110137 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 23.52 x 15.7 inches

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4in thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit comes with Dirt Logic 2.25 shocks. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. They will provide a superior ride quality both on and offroad with excellent damping for offroad use. With the installation of this 2.5in lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance. For owners that want Additional Attributes: GTIN: 00674866110144 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 39 x 29 x 15.7 inches