Performance Gains: This system produced gains of up to +18 HP and +27 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.High-Flow Stainless Steel Black Muffler: This system features a high-flow stainless steel black muffler, producing a aggressive sound. The muffler has a black finish for ultimate corrosion resistance.Dual 4" Diameter Black Exhaust Tips: Finishing off this exhaust system are dual 4" diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style.Installation: Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Exhaust Valve: This cat-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motors (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.Integrated Mitered Merge Collector: A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2016 BMW 228i Base 2015-2016 BMW 228i xDrive Base 2014-2016 BMW M235i Base 2015-2016 BMW M235i xDrive Base

The MagnaFlow Subaru Crosstrek Overland Series Cat-Back Performance Exhaust System #19676 empowers your 2018-2023 Subaru Crosstrek overland rig, equipped with the 2.0L/2.5L H4 engine, with MagnaFlow’s deep signature exhaust note and dyno-proven performance. #19676 features 2.5” diameter mandrel bent main piping that passes through an 18” offset-offset oval muffler with uniquely-integrated No Drone Technology (NDT) tuned chamber before exiting in a high-clearance single passenger side rear exit with a 3.5” black chrome tip. MagnaFlow NDT utilizes Helmholtz resonance noise cancellation to minimize unwanted droning noises at cruising speeds when you’re en route to your destination, creating mild interior and moderate exterior sound levels The high clearance black chrome tip, etched with the MagnaFlow logo, is designed to keep your car clear of any challenging terrain or obstacles you may come across, so you can look and sound good when you’re out exploring. Exhaust kit #19676 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Subaru Crosstrek cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.This Part Fits: Year Make Model Submodel 2018-2023 Subaru Crosstrek Base 2019-2023 Subaru Crosstrek Hybrid 2018-2023 Subaru Crosstrek Limited 2018-2023 Subaru Crosstrek Premium 2021-2023 Subaru Crosstrek Sport

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a throaty sound. Finishing off this exhaust system are dual 2-1/2 IN diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Cutting required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Sport Badlands 2021-2023 Ford Bronco Sport Base 2021-2024 Ford Bronco Sport Big Bend 2021 Ford Bronco Sport First Edition 2024 Ford Bronco Sport Free Wheeling 2023-2024 Ford Bronco Sport Heritage Edition 2023 Ford Bronco Sport Heritage Limited Edition 2021-2024 Ford Bronco Sport Outer Banks

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a throaty sound. Finishing off this exhaust system are dual 2-1/2 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Cutting required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Sport Badlands 2021-2023 Ford Bronco Sport Base 2021-2024 Ford Bronco Sport Big Bend 2021 Ford Bronco Sport First Edition 2024 Ford Bronco Sport Free Wheeling 2023-2024 Ford Bronco Sport Heritage Edition 2023 Ford Bronco Sport Heritage Limited Edition 2021-2024 Ford Bronco Sport Outer Banks

Takeda 2-1/2 IN 304 Stainless Steel Axle-Back Exhaust System w/ Blue Flame Tips Infiniti Q60 17-19 V6-3.0L (tt)Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2022 INFINITI Q60 Luxe 2017 INFINITI Q60 Premium 2019-2022 INFINITI Q60 Pure 2017-2022 INFINITI Q60 Red Sport 400 2017-2018 INFINITI Q60 Sport

Simple Installation: This DPF-back exhaust system uses factory mounting locations providing stability and hassle-free installation.OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.Flow and Performance: This Large Bore-HD DPF-back exhaust system is constructed of 3" to 3-1/2" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.5" Diameter Black Intercooled Tip: Finishing off the exhaust is a 5" diameter, black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe POWER logo plate is riveted on for an aggressive style.Fitment Note: Crew Cab / 5'7" Bed (140" Wheelbase), Crew Cab / 6'4" Bed (149" Wheelbase), Quad Cab / 6'4" Bed (140" Wheelbase)Note: This system requires cutting behind the DPF unit.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2018 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic SLT 2019 Ram 1500 Classic Tradesman

AWE 0FG Exhaust for 3rd Gen Toyota Tundra - Dual Chrome Silver TipsThis Part Fits: Year Make Model Submodel 2022-2024 Toyota Tundra 1794 Edition 2022-2024 Toyota Tundra Capstone 2022-2024 Toyota Tundra Limited 2022-2024 Toyota Tundra Platinum 2022-2024 Toyota Tundra SR 2022-2024 Toyota Tundra SR5 2022-2024 Toyota Tundra TRD Pro

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang GT

This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a powerful sound. This system produces a powerful sound unleashing all available horsepower and torque.Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2019 Hyundai Kona Iron Man Edition 2018-2023 Hyundai Kona Limited 2022-2023 Hyundai Kona N Line 2021 Hyundai Kona Night 2018-2021 Hyundai Kona Ultimate

This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a powerful sound. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2019 Hyundai Kona Iron Man Edition 2018-2023 Hyundai Kona Limited 2022-2023 Hyundai Kona N Line 2021 Hyundai Kona Night 2018-2021 Hyundai Kona Ultimate

This Takeda "muffler-delete" axle-back exhaust system delivers power, sound, and good looks. Constructed from mandrel-bent stainless steel tubing, this system offers for dyno-proven power gains and an aggressive, performance-tuned sound.Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2022 INFINITI Q60 Luxe 2017 INFINITI Q60 Premium 2019-2022 INFINITI Q60 Pure 2017-2022 INFINITI Q60 Red Sport 400 2017-2018 INFINITI Q60 Sport

This BORLA Cat-Back system was designed speifically for the Mustang Dark Horse. 3" diameter True Dual system for high flow. System contains a merge X-Pipe for increased performance and improved sound. System has Active Valve Exhaust valves. System features BORLA's Polyphonic Exhaust Harmonizer Technology with utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. System features the aggressive ATAK sound with no drone inside the vehicle and 5" carbon fiber with black anodized center tips. Systems with bright chrome on T-304 stainless steel tips, and black chrome on T-304 stainless steel tips are aslo available. BORLA Cat-Back and Axle-Back multi-core technology is designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.This Part Fits: Year Make Model Submodel 2024-2025 Ford Mustang Dark Horse

This BORLA Cat-Back system was designed specifically for the Mustang Dark Horse. 3" diameter True Dual system for high flow. System contains a merge X-Pipe for increased performance and improved sound. System has Active Exhaust valves. This system features the classic S-Type sound with no drone inside the vehicle and 5" carbon fiber with black anodized center tips. Systems with bright chrome on T-304 stainless steel tips, and black chrome on T-304 stainless steel are also available. BORLA Cat-Back and Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.This Part Fits: Year Make Model Submodel 2024-2025 Ford Mustang Dark Horse

Simple Installation All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This Mach FORCE-Xp exhaust system is constructed of 4" mandrel-bent aluminized tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. 6" Diameter Black Intercooled Tip: Finishing off the exhaust is a 6" diameter, black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.This Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Silverado 2500 HD High Country 2017-2019 Chevrolet Silverado 2500 HD LT 2017-2019 Chevrolet Silverado 2500 HD LTZ 2017-2019 Chevrolet Silverado 2500 HD WT 2017-2019 Chevrolet Silverado 3500 HD High Country 2017-2019 Chevrolet Silverado 3500 HD LT 2017-2019 Chevrolet Silverado 3500 HD LTZ 2017-2019 Chevrolet Silverado 3500 HD WT 2017-2019 GMC Sierra 2500 HD Base 2017-2019 GMC Sierra 2500 HD Denali 2017-2019 GMC Sierra 2500 HD SLE 2017-2019 GMC Sierra 2500 HD SLT 2017-2019 GMC Sierra 3500 HD Base 2017-2019 GMC Sierra 3500 HD Denali 2017-2019 GMC Sierra 3500 HD SLE 2017-2019 GMC Sierra 3500 HD SLT

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99779HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99776HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93423 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1992-1995 Ford E-150 Econoline and 1992-1995 Ford E-150 Econoline Club Wagon, this direct-fit catalytic converter also interchanges with OE parts F4UZ-5F250-C and F4UZ-5F250-D, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.This Part Fits: Year Make Model Submodel 1992-1995 Ford E-150 Econoline Base 1992-1995 Ford E-150 Econoline XL 1992-1995 Ford E-150 Econoline Club Wagon Chateau 1992-1995 Ford E-150 Econoline Club Wagon Custom 1992-1995 Ford E-150 Econoline Club Wagon XLT

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 79316 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 79315 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 79314 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592966 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 2008-2012 Chevrolet Colorado, 2008-2012 GMC Canyon, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2008 Chevrolet Colorado LS 2008-2012 Chevrolet Colorado LT 2008-2012 Chevrolet Colorado WT 2008 GMC Canyon SL 2008-2012 GMC Canyon SLE 2008-2012 GMC Canyon SLT 2008-2012 GMC Canyon WT 2008 Hummer H3 Adventure 2008 Hummer H3 Base 2008 Hummer H3 Luxury 2008 Hummer H3 X 2008 Isuzu i-290 S 2008 Isuzu i-370 LS

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592944. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2009-2012 Toyota RAV4. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2009-2012 Toyota RAV4 Base 2009-2012 Toyota RAV4 Limited 2009-2012 Toyota RAV4 Sport

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592907. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2013 Toyota Highlander, 2007-2009 Lexus RX350, and more, this direct-fit catalytic converter also interchanges with OE parts 17420-20350 and 17420-20400, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2004-2006 Lexus RX330 Base 2007-2009 Lexus RX350 Base 2004-2013 Toyota Highlander Base 2006-2007,2011-2013 Toyota Highlander Hybrid 2006-2007,2011-2013 Toyota Highlander Hybrid Limited 2004-2013 Toyota Highlander Limited 2013 Toyota Highlander Plus 2010-2013 Toyota Highlander SE 2006-2010 Toyota Highlander Sport

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592863. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2011-2013 Kia Sorento and 2010-2012 Hyundai Santa Fe, this direct-fit catalytic converter also interchanges with OE parts 28950-2G380 and 28950-2G450. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2010-2012 Hyundai Santa Fe GLS 2010-2012 Hyundai Santa Fe Limited 2011-2012 Kia Sorento Base 2011-2013 Kia Sorento EX 2011-2013 Kia Sorento LX

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592862. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2013 Acura MDX. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2010-2013 Acura MDX Base

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592852. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2009-2014 Nissan Murano. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2014 Nissan Murano CrossCabriolet 2009-2014 Nissan Murano LE 2009-2014 Nissan Murano S 2009-2014 Nissan Murano SL 2011-2014 Nissan Murano SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592804. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2010-2017 Chevrolet Equinox, 2010-2017 GMC Terrain, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2015 Chevrolet Captiva Sport LS 2013-2015 Chevrolet Captiva Sport LT 2013-2015 Chevrolet Captiva Sport LTZ 2015-2017 Chevrolet Equinox L 2010-2017 Chevrolet Equinox LS 2010-2017 Chevrolet Equinox LT 2010-2016 Chevrolet Equinox LTZ 2017 Chevrolet Equinox Premier 2013-2017 GMC Terrain Denali 2015-2017 GMC Terrain SL 2010-2017 GMC Terrain SLE 2010-2017 GMC Terrain SLT

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592783. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011 Honda CR-V. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011 Honda CR-V EX 2011 Honda CR-V EX-L 2011 Honda CR-V LX 2011 Honda CR-V SE

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592749. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2012 Toyota RAV4 and interchanges with OE parts 17404-0P022 and 17420-0V072, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2006-2012 Toyota RAV4 Base 2006-2012 Toyota RAV4 Limited 2006-2012 Toyota RAV4 Sport

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592708. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2014-2015 Nissan Rogue. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2014-2015 Nissan Rogue S 2014-2015 Nissan Rogue SL 2014-2015 Nissan Rogue SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592702. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2014 Nissan Quest. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2014 Nissan Quest LE 2011-2014 Nissan Quest S 2011-2014 Nissan Quest SL 2011-2014 Nissan Quest SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592701. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2012-2015 Toyota Tacoma. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2015 Toyota Tacoma Base 2012-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2012-2013 Toyota Tacoma X-Runner

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592699. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2013-2014 Nissan Pathfinder, 2013 INFINITI JX35, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013 INFINITI JX35 Base 2014 INFINITI QX60 Base 2013-2014 Nissan Pathfinder Platinum 2013-2014 Nissan Pathfinder S 2013-2014 Nissan Pathfinder SL 2013-2014 Nissan Pathfinder SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592698. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2009 Lexus GX470 and 2005-2009 Toyota 4Runner, this direct-fit catalytic converter also interchanges with OE part 17410-50450. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2009 Lexus GX470 Base 2005-2009 Toyota 4Runner Limited 2005-2009 Toyota 4Runner Sport 2005-2009 Toyota 4Runner SR5

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592697. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2009 Lexus GX470 and 2005-2009 Toyota 4Runner, this direct-fit catalytic converter also interchanges with OE parts 17450-50121 and 17450-50120. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2009 Lexus GX470 Base 2005-2009 Toyota 4Runner Limited 2005-2009 Toyota 4Runner Sport 2005-2009 Toyota 4Runner SR5

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592670. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2018 Nissan Frontier, 2007-2015 Nissan Xterra, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013-2018 Nissan Frontier Desert Runner 2007-2010 Nissan Frontier LE 2007-2008 Nissan Frontier Nismo Off-Road 2009-2018 Nissan Frontier PRO-4X 2011-2018 Nissan Frontier S 2007-2010 Nissan Frontier SE 2011-2018 Nissan Frontier SL 2011-2018 Nissan Frontier SV 2007-2012 Nissan Pathfinder LE 2007-2012 Nissan Pathfinder S 2007-2010 Nissan Pathfinder SE 2007-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2007-2010 Nissan Xterra Off-Road 2011-2015 Nissan Xterra PRO-4X 2007-2015 Nissan Xterra S 2007-2010 Nissan Xterra SE 2007-2015 Nissan Xterra X 2009 Suzuki Equator Base 2009-2012 Suzuki Equator RMZ-4 2009-2012 Suzuki Equator Sport