This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque.Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Hyundai Veloster Rally Edition 2013-2017 Hyundai Veloster Turbo 2014-2017 Hyundai Veloster Turbo R-Spec

Ticon Industries 12in OAL 2.5in In/Out Ultralight Titanium Muffler

Stainless Works 2024 Mustang GT Catback Quad Tips Redline Sound X-Pipe Factory Connect Exhaust

Stainless Works 2024 Mustang GT Catback Dual Tips Redline Sound X-Pipe Factory Connect Exhaust

Big Block Chevy round port header exhaust flanges. These flanges come as a pair and are designed for 2-1/4" primaries, laser-cut from heavy-duty 3/8" thick 304 stainless steel for superior resistance to warping from high heat, and comes with a limited lifetime warranty.

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.This Part Fits: Year Make Model Submodel 2016 Jeep Wrangler Unlimited 75th Anniversary 2012-2017 Jeep Wrangler Unlimited Rubicon 2012-2017 Jeep Wrangler Unlimited Sahara 2012-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

This 3" diameter Mid-Section includes Active Exhaust Valves. The ATAK sound level delivers an aggressive, race-bred sound without any drone. It features our Polyphonic Harmonizer and SwitchFire technology. BORLA'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA'S patented SwitchFire design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound. It fits with either the O.E. tail pipes or BORLA tail pipes 60727BC and 60727CFBA.The system is constructed using T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, it is backed by our Million Mile Warranty.System Features: Cat-Back Exhaust System S-Type Sound Level Includes Active Exhaust valves SwitchFire Technology T-304 Stainless Steel Construction Million Mile WarrantyThis Part Fits: Year Make Model Submodel 2024 Ford F-150 Raptor R

The BORLA Cat-Back system for the Civic Type R contains an Active Exhaust Valve that allow your vehicle to retain the factory designed valve operation. System also features BORLA's Polyphonic Harmonizer Technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA mufflers. The mufflers then enhance this sound to the character and volume appropriate to deliver the aggressive ATAK sound. System features 2) 4" and 1) 4.5" carbon fiber with black anodized center tips. Systems with polished T-304 stainless steel tips and black coated T-304 stainless steel tips are also available. Includes wiring harness extender for the Active Exhaust Valve Actuator.This Part Fits: Year Make Model Submodel 2023-2024 Honda Civic Type R

The BORLA Cat-Back system for the Civic Type R contains an Active Exhaust Valve that allow your vehicle to retain the factory designed valve operation. System also features BORLA's Polyphonic Harmonizer Technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA mufflers. The mufflers then enhance this sound to the character and volume appropriate to deliver the aggressive ATAK sound. System features 2) 4" and 1) 4.5" black coated T-304 stainless steel tips. Systems with polished T-304 stainless steel tips and carbon fiber with black anodized center tips are alos available. Includes wiring harness extender for the Active Exhaust Valve Actuator.This Part Fits: Year Make Model Submodel 2023-2024 Honda Civic Type R

The BORLA Cat-Back system for the Civic Type R contains an Active Exhaust Valve that allow your vehicle to retain the factory designed valve operation. System also features BORLA's Polyphonic Harmonizer Technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA mufflers. The mufflers then enhance this sound to the character and volume appropriate to deliver the aggressive ATAK sound. System features 2) 4" and 1) 4.5" polished T-304 stainless steel tips. Systems with black coated T-304 stainless steel tips and carbon fiber with black anodized center tips.are also available. Includes wiring harness extender for the Active Exhaust Valve Actuator.This Part Fits: Year Make Model Submodel 2023-2024 Honda Civic Type R

Developing systems for the C8 Corvette presented BORLA(r) engineers with unique challenges, but our team was up to the challenge. Great care was taken to ensure the integrity and function of the system as well as the vehicle itself. Part number 140840CF includes AFM valves but does NOT include NPP dual mode exhaust valves. The S-Type sound level delivers an aggressive, yet balanced sound with a deep tone. It provides a more exciting driving experience without any drone. It features our Polyphonic Harmonizer and SwitchFire(tm) technology. BORLA(r)'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA(r)'S patented SwitchFire(tm) design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with 4" Carbon Fiber tips with bright center and is also available with Bright Chrome on T-304 stainless steel tips part number 140840, or Black Chrome on T-304 stainless steel tips, part number 140840BC. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA(r) system, the controllers for the AFM valves in the exhaust system should be re-calibrated according to GM Document ID 5406413. BORLA(r) recommends taking your car to the nearest Chevrolet dealer for exhaust valve recalibration services., System Features:, Cat-Back(tm) Exhaust System, Includes AFM Valves., Does NOT Include NPP Valves, S-Type Sound Level, SwitchFire(tm) Technology, Heat Shielding, 4" Carbon Fiber Tips With Bright Centers, T-304 Stainless Steel Construction, Million Mile WarrantyThis Part Fits: Year Make Model Submodel 2020-2025 Chevrolet Corvette Stingray 2023 Chevrolet Corvette Z06

Developing systems for the C8 Corvette presented BORLA(r) engineers with unique challenges, but our team was up to the challenge. Great care was taken to ensure the integrity and function of the system as well as the vehicle itself. Part number 140840BC includes AFM valves but does NOT include NPP dual mode exhaust valves. The S-Type sound level delivers an aggressive, yet balanced sound with a deep tone. It provides a more exciting driving experience without any drone. It features our Polyphonic Harmonizer and SwitchFire(tm) technology. BORLA(r)'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA(r)'S patented SwitchFire(tm) design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with 4" Black Chrome on T-304 stainless steel tips and is also available with Bright Chrome on T-304 stainless steel tips part number 140840, or Carbon Fiber tips, part number 140840CF. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA(r) system, the controllers for the AFM valves in the exhaust system should be re-calibrated according to GM Document ID 5406413. BORLA(r) recommends taking your car to the nearest Chevrolet dealer for exhaust valve recalibration services., System Features:, Cat-Back(tm) Exhaust System, Includes AFM Valves., Does NOT Include NPP Valves, S-Type Sound Level, SwitchFire(tm) Technology, Heat Shielding, 4" Black Chrome On T-304 Stainless Steel Tips, T-304 Stainless Steel Construction, Million Mile WarrantyThis Part Fits: Year Make Model Submodel 2020-2025 Chevrolet Corvette Stingray 2023 Chevrolet Corvette Z06

BORLA presents our Axle-Back system for the fourth generation Mazda 3 Sedan. The exhaust system replaces the stock rear muffler and is a direct bolt-on part for ease of installation. Specifically tuned for the 2.5L Skyactiv engines, our S-Type Axle-Back delivers a sportier sound and a more exciting driving experience without any drone. It features 4" black chrome on T-304 stainless steel exhaust tips that properly fill out the rear bumper cutouts. Bright chrome on T-304 stainless steel tips are also available. BORLA Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. As you can expect from BORLA, the exhaust is constructed using T-304 stainless steel and comes with a Million-Mile Warranty. Give your Mazda 3 the sound it deserves, bolt on a BORLA.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Mazda 3 2.5 Carbon Turbo 2021-2024 Mazda 3 2.5 S 2021-2023 Mazda 3 2.5 Turbo 2021-2024 Mazda 3 2.5 Turbo Premium Plus 2019-2020 Mazda 3 Base 2022-2024 Mazda 3 Carbon Edition 2020-2024 Mazda 3 Preferred 2020-2024 Mazda 3 Premium 2020-2023 Mazda 3 Select 2024 Mazda 3 Select Sport

BORLA presents our Axle-Back system for the fourth generation Mazda 3 Sedan. The exhaust system replaces the stock rear muffler and is a direct bolt-on part for ease of installation. Specifically tuned for the 2.5L Skyactiv engines, our S-Type Axle-Back delivers a sportier sound and a more exciting driving experience without any drone. It features 4" bright chrome on T-304 stainless steel exhaust tips that properly fill out the rear bumper cutouts. Black chrome on T-304 stainless steel tips are also available. BORLA Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. As you can expect from BORLA, the exhaust is constructed using T-304 stainless steel and comes with a Million-Mile Warranty. Give your Mazda 3 the sound it deserves, bolt on a BORLA.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Mazda 3 2.5 Carbon Turbo 2021-2024 Mazda 3 2.5 S 2021-2023 Mazda 3 2.5 Turbo 2021-2024 Mazda 3 2.5 Turbo Premium Plus 2019-2020 Mazda 3 Base 2022-2024 Mazda 3 Carbon Edition 2020-2024 Mazda 3 Preferred 2020-2024 Mazda 3 Premium 2020-2023 Mazda 3 Select 2024 Mazda 3 Select Sport

This Conversion Kit adds a resonated mid section to your existing AWE Non-Resonated Track Edition for additional sound tuning.This Part Fits: Year Make Model Submodel 2019 Volkswagen Jetta GLI 35th Anniversary Edition 2019-2021 Volkswagen Jetta GLI Autobahn 2019-2021 Volkswagen Jetta GLI S

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 60502. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2006 Chevrolet Silverado 2500 HD, 2006 GMC Sierra 2500 HD, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.Technical BulletinThis Part Fits: Year Make Model Submodel 2006 Chevrolet Silverado 2500 HD LS 2006 Chevrolet Silverado 2500 HD LT 2006 Chevrolet Silverado 2500 HD WT 2006 Chevrolet Silverado 3500 LS 2006 Chevrolet Silverado 3500 LT 2006 Chevrolet Silverado 3500 WT 2006 GMC Sierra 2500 HD SL 2006 GMC Sierra 2500 HD SLE 2006 GMC Sierra 2500 HD SLT 2006 GMC Sierra 2500 HD WT 2006 GMC Sierra 3500 SL 2006 GMC Sierra 3500 SLE 2006 GMC Sierra 3500 SLT 2006 GMC Sierra 3500 WT

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51108 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2002-2003 Nissan Maxima and 2002-2004 INFINITI I35, this direct-fit catalytic converter also interchanges with OE part 20800-5Y525. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2002-2004 INFINITI I35 Base 2002-2003 Nissan Maxima GLE 2002-2003 Nissan Maxima GXE 2002-2003 Nissan Maxima SE

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49733. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2011 Chevrolet Corvette. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2005-2012 Chevrolet Corvette Base 2010-2012 Chevrolet Corvette Grand Sport

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49298 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2001-2008 Ford Escape, 2001-2008 Mazda Tribute, and more, this direct-fit catalytic converter also interchanges with OE parts AJ05-20-55XF and AJ38-20-55X, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2003-2008 Ford Escape Limited 2001-2005 Ford Escape XLS 2001-2008 Ford Escape XLT 2005 Ford Escape XLT No Boundaries 2005 Ford Escape XLT Sport 2001-2002 Mazda Tribute DX 2001-2004 Mazda Tribute ES 2001-2004 Mazda Tribute LX 2005-2006,2008 Mazda Tribute S 2008 Mercury Mariner Base 2006-2007 Mercury Mariner Luxury 2005-2008 Mercury Mariner Premier

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24358. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2011 Volvo XC90. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2005-2011 Volvo XC90 V8 2006 Volvo XC90 V8 Ocean Race 2007-2008 Volvo XC90 V8 Sport

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-143. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2013-2018 Hyundai Santa Fe and interchanges with OE part 28600-B8150. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2013-2015 Hyundai Santa Fe GLS 2013-2017 Hyundai Santa Fe Limited 2017-2018 Hyundai Santa Fe Limited Ultimate 2016-2018 Hyundai Santa Fe SE 2017-2018 Hyundai Santa Fe SE Ultimate 2019 Hyundai Santa Fe XL Limited Ultimate 2019 Hyundai Santa Fe XL SE

The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 19303 19303 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.625in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19303 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.This Part Fits: Year Make Model Submodel 1979 Chrysler Cordoba 300 1975-1979 Chrysler Cordoba Base 1963-1964 Dodge 330 Base 1963-1964 Dodge 440 Base 1969-1971 Dodge Charger 500 1966-1974,1976 Dodge Charger Base 1969 Dodge Charger Daytona 1967-1971 Dodge Charger R/T 1969 Dodge Charger SE 1971-1978 Dodge Charger Special Edition 1976 Dodge Charger Sport 1971 Dodge Charger Super Bee 1965-1970 Dodge Coronet 440 1965-1970 Dodge Coronet 500 1965-1967,1970-1976 Dodge Coronet Base 1971,1975-1976 Dodge Coronet Brougham 1971-1976 Dodge Coronet Crestwood 1971-1975 Dodge Coronet Custom 1966,1968-1970 Dodge Coronet Deluxe 1967-1970 Dodge Coronet R/T 1968-1970 Dodge Coronet Super Bee 1962 Dodge Dart 330 1962 Dodge Dart 440 1962 Dodge Dart Base 1978-1979 Dodge Magnum XE 1977-1978 Dodge Monaco Base 1977-1978 Dodge Monaco Brougham 1977-1978 Dodge Monaco Crestwood 1963 Dodge Polara 500 1962-1964 Dodge Polara Base 1962-1970 Plymouth Belvedere Base 1968-1970 Plymouth Belvedere Satellite 1962-1967,1975-1978 Plymouth Fury Base 1971,1975 Plymouth Fury Custom 1968,1970-1975 Plymouth Fury Custom Suburban 1970,1972 Plymouth Fury Gran Coupe 1972 Plymouth Fury Gran Sedan 1970 Plymouth Fury GT 1974 Plymouth Fury Police 1970 Plymouth Fury S-23 1976-1978 Plymouth Fury Salon 1962-1971,1975-1978 Plymouth Fury Sport 1970-1971 Plymouth Fury Sport GT 1968,1970-1978 Plymouth Fury Sport Suburban 1968,1970-1978 Plymouth Fury Suburban 1966,1968-1969 Plymouth Fury VIP 1967-1971 Plymouth GTX Base 1968-1975 Plymouth Road Runner Base 1965-1974 Plymouth Satellite Base 1971 Plymouth Satellite Brougham 1971-1974 Plymouth Satellite Custom 1971-1974 Plymouth Satellite Regent 1971-1974 Plymouth Satellite Sebring 1971-1974 Plymouth Satellite Sebring Plus 1968-1970 Plymouth Satellite Sport 1962-1964 Plymouth Savoy Base

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2023-2024 Toyota GR Corolla Circuit Edition 2023-2024 Toyota GR Corolla Core 2023 Toyota GR Corolla Morizo Edition 2024 Toyota GR Corolla Premium

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93992. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2004 Pontiac GTO. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2004 Pontiac GTO Base

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93671 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1999-2004 Ford Mustang and interchanges with OE parts 2R3Z-5F250-DA and XR3Z-5F250-EGL, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 1999-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 2003 Ford Mustang Mach 1 1999,2001,2003 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93487. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1986-1991 Chevrolet Corvette. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.This Part Fits: Year Make Model Submodel 1988 Chevrolet Corvette 35th Anniversary Edition 1986-1991 Chevrolet Corvette Base 1986 Chevrolet Corvette Indianapolis 500 Pace Car 1990-1991 Chevrolet Corvette ZR-1

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93306 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1984-1987 Ford F-150, 1984-1987 Ford F-250, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.This Part Fits: Year Make Model Submodel 1984-1987 Ford Bronco Custom 1985-1987 Ford Bronco Eddie Bauer 1984-1987 Ford Bronco XLT 1984-1986 Ford F-150 Base 1987 Ford F-150 Custom 1984-1987 Ford F-150 XL 1984 Ford F-150 XLT 1985-1987 Ford F-150 XLT Lariat 1984-1986 Ford F-250 Base 1987 Ford F-250 Custom 1984-1987 Ford F-250 XL 1984 Ford F-250 XLT 1985-1987 Ford F-250 XLT Lariat 1984-1986 Ford F-350 Base 1987 Ford F-350 Custom 1984-1987 Ford F-350 XL 1984 Ford F-350 XLT 1985-1987 Ford F-350 XLT Lariat

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561292. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2013-2015 Audi A6 Quattro and 2012-2015 Audi A6, this direct-fit catalytic converter also interchanges with OE part 4G0 254 250 JX. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2015 Audi A6 Premium 2012-2015 Audi A6 Premium Plus 2013-2015 Audi A6 Quattro Premium 2013-2015 Audi A6 Quattro Premium Plus

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551723. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2011-2012 Jeep Grand Cherokee and 2011-2012 Dodge Durango. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2012 Dodge Durango Citadel 2011-2012 Dodge Durango Crew 2011 Dodge Durango Express 2011 Dodge Durango Heat 2012 Dodge Durango Special Service 2012 Dodge Durango SXT 2011-2012 Jeep Grand Cherokee Laredo 2011-2012 Jeep Grand Cherokee Limited 2011-2012 Jeep Grand Cherokee Overland 2012 Jeep Grand Cherokee Overland Summit

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551694. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2008 Ford F-150 and 2007-2008 Lincoln Mark LT. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2007-2008 Ford F-150 FX2 2007-2008 Ford F-150 FX4 2007-2008 Ford F-150 Harley-Davidson Edition 2007-2008 Ford F-150 King Ranch 2007-2008 Ford F-150 Lariat 2008 Ford F-150 Limited 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2007-2008 Ford F-150 XL 2007-2008 Ford F-150 XLT 2007-2008 Lincoln Mark LT Base

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5491562. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2011 Toyota Tacoma. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2011 Toyota Tacoma Base 2005-2011 Toyota Tacoma Pre Runner 2005-2011 Toyota Tacoma X-Runner

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5451046. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2010 Jeep Grand Cherokee. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2006-2010 Jeep Grand Cherokee SRT8

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 53163 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52281. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2012-2013 Volkswagen Jetta, 2012-2017 Volkswagen CC, and more, this direct-fit catalytic converter also interchanges with OE parts 3C0 254 506 DX and 5C0 254 500 L, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2012-2013 Volkswagen Beetle Turbo 2014-2015 Volkswagen CC Executive 2012-2013 Volkswagen CC Lux 2012 Volkswagen CC Lux Limited 2012 Volkswagen CC Lux Plus 2012-2016 Volkswagen CC R-Line 2016-2017 Volkswagen CC R-Line Executive 2012-2017 Volkswagen CC Sport 2013 Volkswagen CC Sport Plus 2016 Volkswagen CC Trend 2012-2013 Volkswagen Jetta GLI 2009-2010 Volkswagen Passat Komfort

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52223. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2012 Mazda CX-7 and interchanges with OE parts L533-20-55XE and L533-20-55XA, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2010-2012 Mazda CX-7 Sport 2010-2012 Mazda CX-7 SV 2011-2012 Mazda CX-7 Touring

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52182. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2010 Pontiac G6, 2007-2008 Saturn Aura, and more, this direct-fit catalytic converter also interchanges with OE parts 15943284 and 15943284, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2008 Chevrolet Malibu Classic LS 2008 Chevrolet Malibu Classic LT 2008-2010 Chevrolet Malibu LS 2009 Chevrolet Malibu LT 2007-2010 Pontiac G6 Base 2007-2010 Pontiac G6 GT 2007-2008 Saturn Aura XE