All

HOT transmission oil has to be COOLED to keep you on the track. Double stacked cores deliver over 40,000 BTU/HR of cooling and over 350% temperature drop versus the factory system - 36% better temperature drop than BD's standard single core kit. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. Cooler Assembly Only Double stacked cores deliver over 40,000 BTU/HR of cooling Over 350% temperature drop versus the factory system 136% better temperature drop than XTRUDED single core kit Motor is IP54 with 65% duty cycle Additional Attributes: GTIN: 00019025012455 Engine: Duramax 6.6L 11-19 LML-LGH-L5P Make: Ford Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 17.3 x 13 x 6.5 inches

HOT transmission oil has to be COOLED to keep you on the track. Double stacked cores deliver over 40,000 BTU/HR of cooling and over 350% temperature drop versus the factory system - 36% better temperature drop than BD's standard single core kit. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look. Large surface area to transfer heat for external air flow cooling Turbulent oil flow design promotes a more complete cooling Double stacked cores deliver over 40,000 BTU/HR of cooling Over 350% temperature drop versus the factory system 136% better temperature drop than XTRUDED single core kit Large 5/8-inch ports prevents inlet/outlet restriction Furnace brazed rails have been tested to 300psi of pressure Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan Kits complete with all fittings, clamps, hoses and hardware Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal The pre-wired loomed harness with fuse and relay comes with plug-in connectors Dodge 47RH / 47RE / 48RE / 68RFE - 1/2-inch Cooler Lines Ford 5R110/6R140 - 1/2-inch Cooler Lines) Additional Attributes: GTIN: 00019025011533 Engine: Motorhome Diesel Power Make: Ford Suggested Product: 1041210 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22 x 15.6 x 10.8 inches

Coolers, providing 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. This combination gives BD's Xtruded Transmission Oil Cooler a rating of 33,930 BTU/HR and in excess of 30,000 GVW! Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look. 22% more cooling over other designs 200 Micro Extruded passages The pre-wired loomed harness with fuse and relay comes with plug-in connectors Chevy Allison 1000 - 5/8-inch Cooler Lines Large surface area to transfer heat for external air flow cooling Turbulent oil flow design promotes a more complete cooling Large 5/8-inch ports prevents inlet/outlet restriction Furnace brazed rails have been tested to 300psi of pressure Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan 33,930 BTU/HR and in excess of 30,000 GVW! Kits complete with all fittings, clamps, hoses and hardware Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal Additional Attributes: GTIN: 00019025010710 Engine: Motorhome Diesel Power Make: Chevy/GM Suggested Product: 1061825 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22 x 15.6 x 10.8 inches

Coolers, providing 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. This combination gives BD's Xtruded Transmission Oil Cooler a rating of 33,930 BTU/HR and in excess of 30,000 GVW! Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look. 22% more cooling over other designs 200 Micro Extruded passages The pre-wired loomed harness with fuse and relay comes with plug-in connectors Chevy 1999-2000 4L80E - 3/8-inch Cooler Lines Ford 1999-2003 4R100 - 3/8-inch Cooler Lines Large surface area to transfer heat for external air flow cooling Turbulent oil flow design promotes a more complete cooling Large 5/8-inch ports prevents inlet/outlet restriction Furnace brazed rails have been tested to 300psi of pressure Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan 33,930 BTU/HR and in excess of 30,000 GVW! Kits complete with all fittings, clamps, hoses and hardware Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal Additional Attributes: GTIN: 00019025010697 Engine: Motorhome Diesel Power Make: Ford Suggested Product: 1061830 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22 x 15.6 x 10.8 inches

22% more cooling over other designs; 200 Micro Extruded passages; Large surface area to transfer heat for external air flow cooling; Turbulent oil flow design promotes a more complete cooling; Large 5/8-inch ports prevents inlet/outlet restriction; Furnace brazed rails have been tested to 300psi of pressure; 80-watt, 10-inch, 800 CFM electric fan; 33,930 BTU/HR and in excess of 30,000 GVW!; Motor is IP54 with 65% duty cycle; Cooler Assembly Only 22% more cooling over other designs 200 Micro Extruded passages Large surface area to transfer heat for external air flow cooling Turbulent oil flow design promotes a more complete cooling Large 5/8-inch ports prevents inlet/outlet restriction Furnace brazed rails have been tested to 300psi of pressure 80-watt, 10-inch, 800 CFM electric fan 33,930 BTU/HR and in excess of 30,000 GVW! Motor is IP54 with 65% duty cycle Cooler Assembly Only Additional Attributes: GTIN: 00019025016750 Engine: Motorhome Diesel Power Make: Ford Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 17.3 x 13 x 6.5 inches

80-watt, 10-inch, 800 CFM universal electric fan. The fan is supplied as a "pusher" fan from factory which will draw air in through the grille of the fan and push that air into the radiator. This is ideal for installation on the front side of the vehicles radiator. The fan may be converted to a "puller" fan so that it will draw air through the radiator fins, and then out through the fan grille. This is ideal for installation on the rear side of the vehicle radiator. Intended for installation on transmission oil coolers, engine oil coolers, engine radiators or other universal applications. Use as pusher (default) or puller 10-inch diameter 800 CFM flow 80-watt electric motor Universal mounting kit Motor is IP54 with 65% duty cycle Additional Attributes: GTIN: 00019025017795 Engine: Motorhome Diesel Power Make: Ford Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 6 inches

HOT transmission oil has to be COOLED to keep you on the track. Double stacked cores deliver over 40,000 BTU/HR of cooling and over 350% temperature drop versus the factory system - 36% better temperature drop than BD's standard single core kit. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look. Large surface area to transfer heat for external air flow cooling Turbulent oil flow design promotes a more complete cooling Over 350% temperature drop versus the factory system 136% better temperature drop than XTRUDED single core kit Large 5/8-inch ports prevents inlet/outlet restriction Furnace brazed rails have been tested to 300psi of pressure Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan Kits complete with all fittings, clamps, hoses and hardware Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal The pre-wired loomed harness with fuse and relay comes with plug-in connectors Chevy Allison 1000 - 5/8-inch Cooler Lines Double stacked cores deliver over 40,000 BTU/HR of cooling Additional Attributes: GTIN: 00019025011540 Engine: Motorhome Diesel Power Make: Chevy/GM Suggested Product: 1061825 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22 x 15.6 x 10.8 inches

Coolers, providing 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. This combination gives BD's Xtruded Transmission Oil Cooler a rating of 33,930 BTU/HR and in excess of 30,000 GVW! Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look. 22% more cooling over other designs 200 Micro Extruded passages The pre-wired loomed harness with fuse and relay comes with plug-in connectors Chevy 1991-1999 4L80E - 5/16-inch Cooler Lines Ford 1994-1997 E4OD - 5/16-inch Cooler Lines Large surface area to transfer heat for external air flow cooling Turbulent oil flow design promotes a more complete cooling Large 5/8-inch ports prevents inlet/outlet restriction Furnace brazed rails have been tested to 300psi of pressure Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan 33,930 BTU/HR and in excess of 30,000 GVW! Kits complete with all fittings, clamps, hoses and hardware Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal Additional Attributes: GTIN: 00019025010703 Engine: Motorhome Diesel Power Make: Ford Suggested Product: 1036520 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22 x 15.6 x 10.8 inches

Coolers, providing 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. This combination gives BD's Xtruded Transmission Oil Cooler a rating of 33,930 BTU/HR and in excess of 30,000 GVW! Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look. 22% more cooling over other designs 200 Micro Extruded passages The pre-wired loomed harness with fuse and relay comes with plug-in connectors Dodge 47RH / 47RE / 48RE / 68RFE - 1/2-inch Cooler Lines Ford 5R110/6R140 - 1/2-inch Cooler Lines) Large surface area to transfer heat for external air flow cooling Turbulent oil flow design promotes a more complete cooling Large 5/8-inch ports prevents inlet/outlet restriction Furnace brazed rails have been tested to 300psi of pressure Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan 33,930 BTU/HR and in excess of 30,000 GVW! Kits complete with all fittings, clamps, hoses and hardware Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal Additional Attributes: GTIN: 00019025010680 Engine: Motorhome Diesel Power Make: Ford Suggested Product: 1041210 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22 x 15.6 x 10.8 inches