Close ×
Choose your Vehicle
Select your vehicle for a custom shopping experience
Rhino-Rack U-Bolt Kit - 4 pcs
$48.99
The U Bolt Kit is recommended for use when mounting a Rhino-Rack Mesh Basket, Mesh Platform or a Luggage Box/Ski Box to the Rhino-Rack Vortex Bar.Sold as a set of 4 rounded U Bolts, they will assist you mount Rhino-Rack accessories more securely to your Vortex bar.Installation InstructionsInstallation Instructions
Rhino-Rack Vortex Wrap Pads - 15in - Pair
$49.99
Rhino-Rack's foam Wrap Pads are the perfect accessory to wrap around your Vortex bars for the extra protection required when loading and unloading your kayak/canoe/surfboard.Installation Instructions
Rhino-Rack Crossbar Work Light Bracket
$39.99
The Rhino-Rack Work Light Bracket is used to mount various lights and antennas to your Rhino-Rack Vortex and Heavy Duty bars. It is made from oxidized mild steel to withstand corrosion. Spring washers are Includesded so your Work Light remains fixed even when driving on corrugated roads.The Work Light Bracket is easy to install and adjust to custom configurations. The item is sold individually and the light is not Includesded. The use of shake proof washers ensures hardware will remain secure while driving on corrugated roads.Installation Instructions
Rhino-Rack U-Bolt Kit - 4 pcs
$49.99
The U Bolt Kit is recommended for use when mounting a Rhino-Rack Mesh Basket, Mesh Platform or a Luggage Box/Ski Box to the Rhino-Rack Heavy Duty Bar. Sold as a set of 4 square U Bolts, they will assist you mounting these adventure accessories securely to your Heavy Duty bar.Installation InstructionsInstallation Instructions
Rhino-Rack Rapid Tie Down Straps w/Buckle Protector - 4.5m/15ft - Pair - Red
$39.99
The RTD45P Rapid Straps are suitable for heavy duty use and feature a unique design registered unique Buckle Protector. Designed to encase the metal cam buckle, the Buckle Protector is made from injection molded, TPV rubber and provides maximum protection to avoid denting, scratching or marking any of your gear or vehicle. This item also Includesdes a sewn in Velcro Roll it Strap to keep the strap neatly stowed on its own.Installation Instructions
Rhino-Rack Tie Down Straps - 3m/10ft - Pair
$29.99
Keeping your load stable and protected while on the move is a simple task when using our 3m / 10ft Tie Down Straps. Our Tie Down Straps are made from heavy duty 25mm / 1" polyester webbing which ensures they won't rip or fray. They also feature a metal buckle for secure fastening and boast a lashing capacity of 225kg / 496lb.
Rhino-Rack Spare Wheel Strap
$44.95
Every avid camper or 4WDer knows a spare wheel is one of the essential items you need to bring with you on any adventure. Rhino-Rack has developed a spare wheel strap to securely fasten your wheel to our range of Pioneer Trays and Platforms so you can free up the space inside your vehicle. The installation is simple to attach and detach but most importantly it will secure your spare wheel for those unfortunate situations. Stay safe with Rhino-Rack.Installation Instructions
Rhino-Rack Ladder Peg - Small - 3in - Pair
$26.99
The two-in-one designed small ladder peg allows you to support your ladder from sliding and well as providing a tie off point when you are securing your load.The small pegs are 75mm/3in height and feature an eye bolt head to allow easy tie off.Comes as a pair, they have been designed to fit perfectly to your Rhino-Rack Heavy Duty bar.Installation Instructions
Rhino-Rack Heavy Duty Pipe Clamps - 4in - 4 Half Clamps
$48.99
Made from galvanized steel, these 100mm / 4" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Heavy Duty Bar, and are secured in place with an M8 bolt and nyloc nut.Installation Instructions
Rhino-Rack Recovery Track Bracket Pins - 4 pcs
$49.99
Use these with the Pioneer Recovery Track Side Bracket (43159) to attach your Maxtrax Vehicle Recovery products to your Pioneer Platform or Tray.Installation Instructions
Rhino-Rack Ladder Peg - Medium - 5.3in - Pair
$28.99
The two-in-one designed large ladder peg allows you to support your ladder from sliding as well as providing a tie off point when you are securing your load. The medium pegs are 135mm/5.3inches in height and feature an eye bolt head to allow easy tie off. Comes as a pair, they have been designed to fit perfectly to your Rhino-Rack Heavy Duty bar.Installation Instructions
Rhino-Rack 2500 Leg Spacer - 34mm - 2 Adaptors/6 Spacers
$29.99
The RLKS4 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a pickup that may have rear posts or a cap/topper rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar, this set of spacers will raise the cross bar 34mm in height.
Rhino-Rack Load Holder - Pair
$39.99
The Rhino-Rack Load Holder is designed so that you can secure your load in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks.Installation Instructions
Rhino-Rack Rhino Master Key Lock Set No. 125 (Pair)
$40.00
Master Keys allow you to upgrade the locks in selected roof racks and accessories to all use one key - eliminating the need to vehiclery multiple keys. Say goodbye to having to fiddle with your keys to find the right one!Installation Instructions
Rhino-Rack J-Bolt - Long
$34.99
The Rhino J Bolt Long is a great 4WD accessory that can be used in conjunction with your Rhino Heavy Duty roof racks to secure a spare wheel. Free up the much needed cabin space for those long journeys.Installation Instructions
Rhino-Rack Eye Bolt Kit - Pair
$29.99
The Rhino-Rack Eye Bolt is used as a tie off point when securing your load. Being compatible with many of Rhino-Rack's accessories it is one of our most widely used bolts. The REB kit Includesdes 2 Eye Bolts which mount directly to Rhino-Rack Heavy Duty bars and are made from corrosion resistant galvanised steel.Installation Instructions
Rhino-Rack Fat Bike Adapter Kit (Suits RBC050)
$39.99
The Fat Bike Adapter works in conjunction with the RBC050 Hybrid / RockyMounts Bike vehiclerier. With a few simple changes to the system like wider wheel supports and extension straps the Hybrid / RockyMounts Bike vehiclerier is able to transport your Fat Bike for sandy cycling and all-terrain adventures. The Fat Bike Adaptor is simple and easy to use so that you can explore faster and further.Installation Instructions
Rhino-Rack Multi Axle Adaptor
$49.99
The Rhino-Rack Multi Axle adaptor converts your existing Rhino-Rack fork mount bike vehiclerier to work with new and emerging thru-axle standards used within the cycling industry. It offers the complete bike vehiclerying solution for common thru axle bikes with and without disc brakes.Installation Instructions
Rhino-Rack 2in Hitch Receiver Locking Pin
$50.00
The 2 Hitch Receiver allows you to secure your 2 receiver bike racks (RBC038) to your vehicle - greatly reducing the risk of theft.This product is already Includesded with the RBC038 Bike vehiclerier and is suitable for use as a spare.Installation Instructions
Rhino-Rack Paddle Board Nose/Tail Tie Down Strap
$49.99
The RBAS2 is tie down strap with an anchor strap designed to wrap around the nose/tail of a stand up paddleboard. They are quick and easy to fit and provides an anchor point for long loads when no tie off points are available.Installation Instructions
Rhino-Rack Kayak/Ski Bonnet Tie Down Strap
$49.99
The RBAS1 Includesdes a 3.6m tie down strap with an anchor point strap designed to wrap around and protect kayaks or objects without a front or rear tie off point. They are quick and easy to fit and provides an anchor point for long loads when no tie off points are available. It can be used for both Bow and Stern hood and trunk. See the fitting instructions in the documents section for easy step by step guides.Installation Instructions
Rhino-Rack Fiat Doblo Quick Mount Ditch Bracket - Middle - 2 pcs
$39.99
This kit contains 2 rubber bases for use with the Rhino-Rack RLT600 leg.Installation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2015-2022
Ram
ProMaster City
Base
2015-2021
Ram
ProMaster City
SLT
2015-2022
Ram
ProMaster City
Tradesman
2015-2021
Ram
ProMaster City
Tradesman SLT
Rhino-Rack Pioneer Leg Height Spacer for RLT600 Legs
$49.99
The PLHS4 Rhino-Rack Backbone Pioneer Leg Height Spacer is designed to fit the Pioneer Roof Systems onto the RLT600 Quick Mount LegsInstallation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2011
Jeep
Wrangler
70th Anniversary
2016
Jeep
Wrangler
75th Anniversary
2007-2018
Jeep
Wrangler
Rubicon
2007-2017
Jeep
Wrangler
Sahara
2010-2018
Jeep
Wrangler
Sport
2016,2018
Jeep
Wrangler
Sport S
2011
Jeep
Wrangler
Unlimited 70th Anniversary
2016
Jeep
Wrangler
Unlimited 75th Anniversary
2018
Jeep
Wrangler
Unlimited Moab
2007-2018
Jeep
Wrangler
Unlimited Rubicon
2007-2018
Jeep
Wrangler
Unlimited Sahara
2010-2018
Jeep
Wrangler
Unlimited Sport
2016,2018
Jeep
Wrangler
Unlimited Sport S
2007-2010
Jeep
Wrangler
Unlimited X
2007-2010
Jeep
Wrangler
X
Rhino-Rack Jeep Wrangler JK Pioneer Leg Height Spacer - 2 Pairs
$39.99
The PLHS1 Pioneer Leg Height Spacers are designed to raise the Pioneer Roof Trays to allow the legs to slide out wider onto the Rhino-Rack Backbone system developed for the JEEP JK Wrangler. 4 spacers are Includesded in this kit.Installation Instructions
Rhino-Rack STOW iT Roller Adaptor 2 Pack
$29.99
The STOW iT Roller Adapter provides roller installation flexibility to anywhere on the perimeter of the Pioneer platform or Rhino-Rack crossbars. The Roller Adaptor is used in conjunction with the STOW iT starter kit where it simply slides into the STOW iTStarter Kit base bracket wherever it is mounted.Installation Instructions
Rhino-Rack Heavy Duty Leg Height Spacer - 10mm - 2 Pairs
$29.99
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.This Part Fits:
Year
Make
Model
Submodel
1988
Land Rover
Range Rover
40th Anniversary Edition
1970-1974,1987-1992
Land Rover
Range Rover
Base
1989-1990,1992-1994
Land Rover
Range Rover
County
1993-1994
Land Rover
Range Rover
County LWB
1991
Land Rover
Range Rover
County SE
1991
Land Rover
Range Rover
Great Divide
1989,1991
Land Rover
Range Rover
Hunter
1992
Land Rover
Range Rover
LSE
1993
Land Rover
Range Rover
Sport
2001-2006
Mitsubishi
Montero
Limited
2001-2004
Mitsubishi
Montero
XLS
2001-2003
Mitsubishi
Montero Sport
ES
2001-2003
Mitsubishi
Montero Sport
Limited
2001-2004
Mitsubishi
Montero Sport
LS
2001-2004
Mitsubishi
Montero Sport
XLS
2001
Mitsubishi
Montero Sport
XS
Rhino-Rack Kayak Carrier Fitting Kit for Vortex/Heavy Duty Bar (Suits S510/S512/S512X)
$34.99
If you have a Rhino-Rack Vortex or Heavy Duty Crossbar system and want to mount a number of Rhino's kayak and canoe vehicleriers Includesding the S510, S512 or the Kayak Extension Piece S512X you will need the KC-FK8 fitting kit. This fitting kit will also suit the Thule Aero and Thule Aeroblade cross bars.Installation Instructions
Rhino-Rack Pioneer NG Replacement Corner Set - 1 Left/1 Right
$34.99
Pioneer NG replacement corners, inlcudes 1 Left & 1 Right Corner with fitting screws Includesded. Compatible with all 52XXX Pioneer Platforms (Pioneer NG)
Rhino-Rack Pioneer Heavy Duty Attachment Plate Kit
$49.99
The Pioneer Heavy Duty Attachment Plate allows you to attach the Rhino-Rack Pioneer Trays and Platforms to your Heavy Duty crossbars. Now you can transform your crossbar system with a simple installation process and create more roof space for your daily adventure and commercial needs. Made from strong mild steel this powder coated Pioneer Heavy Duty Attachment Plate Kit will resist corrosion. A single set Includesdes two attachment plates that suit a single bar system. This product will fit all Pioneer Tray and Platform sizes.Installation Instructions
Rhino-Rack Batwing Heavy Duty Bar Hardware Fitting Kit
$36.99
This hardware kit has been designed so the Batwing Awning can be installed on the Rhino-Rack Heavy Duty Bar. It Includesdes hardware required to fit the existing Batwing Awning Bracket to your Heavy Duty Bars.Installation Instructions
Rhino-Rack Dome 1300 Side Wall
$49.99
Provide extra cover to your Dome 1300 Awning with the Dome 1300 Side Wall. Add an extra 2m x 2m of coverage and enjoy the extra shade and privacy the next time you are outdoors with your friends and family. Simply fit in place and secure to the ground at an angle.Installation Instructions
Rhino-Rack Sunseeker Double Zipper - 2.5m
$40.00
This double zipper fits the 2.5m Sunseeker and Dome 1300 Awnings allowing an Awning Fly Extension (#32117) to be installed with the Tagalong Tent. The Awning Fly Extension protects the Tagalong Tent from direct sunlight and provides a much cooler living space while camping.Installation Instructions
Rhino-Rack Sunseeker Extension Adaptor - 2.5m
$40.00
The Rhino-Rack Sunseeker Extension Adapter is a heavy duty zipper that connects easily to the Sunseeker 2.5 Awning (32105) allowing you to attach an Awning Extension accessory (31101). It is easy to fit and simply slides into place.Installation Instructions
Rhino-Rack Sunseeker Euro/Thule/Yakima Bar Bracket Kit
$25.00
The Sunseeker Euro Bar Bracket Kit is required to fit our Sunseeker Awning range to the Rhino-Rack Euro square bar roof rack system. This bracket kit can also be used to fit the Batwing Awning to vehicleac, Mont Blanc and Thule square bars. Made from powder coated steel this product will stand up to the toughest environment and will not corrode. Simple to install and made for strength and durability the Sunseeker Euro Bar Bracket Kit is what you need to transform your Roof Rack system into an outdoor accessory.Installation Instructions
Rhino-Rack Sand Screw - Set of Two
$29.99
Don't let your tent or awning blow away with the wind. Rhino-Rack's specially designed Sand Screw takes the hard work out of securing your tent and awning to the ground. It is suitable for both sand and outdoor environments and perfect for environments where other tent pegs fail to hold.Installation Instructions
Rhino-Rack Batwing Thule/Yakima Bracket Kit
$39.99
Need a Batwing Awning to fit onto your Thule or Yakima roof racks? The Thule/Yakima Bracket Kit is designed so that you can fit the Rhino-Rack Batwing Awning to your square bar Thule or Yakima racks. Take the Batwing with you everywhere you go with almost any roof rack system. This easy to install bracket kit will create the best possible situation for your outdoor activities.Installation Instructions