This K&N cold air intake system is engineered for your RAM 1500 L6-3.0L TT F/L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides a guaranteed increase of 41.13 horsepower and 67.85 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed enclosed air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2025 Ram 1500 Big Horn 2025 Ram 1500 Laramie 2025 Ram 1500 Limited 2025 Ram 1500 Limited Longhorn 2025 Ram 1500 Lone Star 2025 Ram 1500 Rebel 2025 Ram 1500 RHO 2025 Ram 1500 Tradesman 2025 Ram 1500 Tradesman HFE 2025 Ram 1500 Tungsten 2025 Ram 1500 Warlock

Vent tubes can be used to attach smog tubes, crank case ventilation tubes or other vacuum related accessories. Requires creating 1/4 inch NPT threaded fitting in filter base, valve cover or other assembly where used.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2023 Ford Bronco Raptor

This K&N NextGen cold air intake system is engineered for Dodge Charger V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 42.7% to your engine and provides an increase of 14.94 horsepower and 8.22 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2014 Chrysler 300 Base 2013-2017 Chrysler 300 C 2013-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2011-2012,2015-2020 Chrysler 300 Limited 2012-2023 Chrysler 300 S 2018-2023 Chrysler 300 Touring 2018-2023 Chrysler 300 Touring L 2017-2023 Dodge Challenger GT 2014 Dodge Challenger Rallye Redline 2011 Dodge Challenger SE 2012-2023 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2018-2023 Dodge Charger GT 2018 Dodge Charger GT Plus 2011-2023 Dodge Charger Pursuit 2011-2017 Dodge Charger SE 2012-2023 Dodge Charger SXT 2012,2018 Dodge Charger SXT Plus 2018 Dodge Charger SXT Plus Leather

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2024-2025 Acura Integra Type S 2023-2025 Honda Civic Type R

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2023-2024 Chevrolet Colorado LT 2023-2024 Chevrolet Colorado Trail Boss 2023-2024 Chevrolet Colorado WT 2023-2024 Chevrolet Colorado Z71 2023-2024 Chevrolet Colorado ZR2 2023-2024 GMC Canyon AT4 2023-2024 GMC Canyon AT4X 2023-2024 GMC Canyon Denali 2023-2024 GMC Canyon Elevation

The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2013-2018 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it doesThe Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks' High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.The complete systemBank's High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.How it was designedUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.ExpandableWith four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.Beats the competitionLike all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2024-2025 Ford Mustang Dark Horse 2024-2025 Ford Mustang Dark Horse Premium 2024-2025 Ford Mustang GT 2024-2025 Ford Mustang GT Premium

Boost your truck’s performance with our high-performance air intake system designed specifically for the Ford F Super Duty. Engineered for enthusiasts who want more horsepower, improved airflow, and stronger acceleration, this system enhances engine output on both diesel and gasoline models. Enjoy the advantages of a K&N air intake system for the Ford F Super Duty and a performance air intake for Ford diesel vehicles—all built for durability and easy installation.Key Features• HDPE rotationally molded tube design that increases engine airflow and boosts horsepower and torque• Washable, reusable high-flow air filter with oiled cotton media—service intervals up to 100,000 miles under normal highway conditions• Custom heat shield to protect intake air from engine bay heat• CARB status compliance details available in the product specificationsInstallation & MaintenanceInstallation is user-friendly and can be completed in less than 60 minutes. For detailed guidance, please refer to our Installation Instructions and additional user resources. With minimal maintenance required, this system is perfect for DIY enthusiasts looking for reliable, long-lasting performance.Vehicle FitmentCompatible models include various trims of the 2017-2019 Ford F-250 Super Duty and F-350 Super Duty. Below is a quick reference: Year Make Model Trim 2017-2019 Ford F-250 Super Duty King Ranch 2017-2019 Ford F-250 Super Duty Lariat 2018-2019 Ford F-250 Super Duty Limited 2017-2019 Ford F-250 Super Duty Platinum 2017-2019 Ford F-250 Super Duty XL 2017-2019 Ford F-250 Super Duty XLT 2017-2019 Ford F-350 Super Duty King Ranch 2017-2019 Ford F-350 Super Duty Lariat 2018-2019 Ford F-350 Super Duty Limited 2017-2019 Ford F-350 Super Duty Platinum 2017-2019 Ford F-350 Super Duty XL 2017-2019 Ford F-350 Super Duty XLT Ready to upgrade your ride? Buy now and experience the difference by browsing our full range in the Air Intake Systems collection.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2021-2024 Ford Explorer King Ranch 2020-2024 Ford Explorer Platinum 2020-2024 Ford Explorer ST 2020-2023 Lincoln Aviator Base 2020-2024 Lincoln Aviator Black Label 2020-2023 Lincoln Aviator Black Label Grand Touring 2020-2023 Lincoln Aviator Grand Touring 2022-2024 Lincoln Aviator Livery 2024 Lincoln Aviator Premiere 2020-2024 Lincoln Aviator Reserve

The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2013-2018 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it doesThe Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks' High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.The complete systemBank's High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.How it was designedUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.ExpandableWith four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.Beats the competitionLike all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2013-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2013-2018 Ram 3500 SLT 2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

The all new Takeda Retain Intake System produces up to 9HP and 9lbs. x ft. of torque over stock, while outflowing the factory intake by 24%. A one-piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2020 Acura TLX Base 2013-2017 Honda Accord EX 2013-2017 Honda Accord EX-L 2013-2017 Honda Accord LX 2013-2017 Honda Accord LX-S 2013-2017 Honda Accord Sport 2017 Honda Accord Sport Special Edition

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2021-2022 Ford E-350 Super Duty Base

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2022-2025 Hyundai Elantra N Base

Boost your engine's performance with this advanced air intake kit, engineered to increase horsepower and torque by optimizing airflow and throttle response. Enjoy enhanced durability and efficiency with every drive.Key Features• An enclosed air box design shields the filter and incoming air from engine bay heat while offering quick, tool-free access for maintenance.• A high-density polyethylene (HDPE) rotationally molded tube notably boosts airflow volume for superior performance.• A washable, reusable high-flow air filter featuring premium oiled-cotton media provides reliable air filtration.• An oversized, conical design extends the service interval up to 100,000 miles under normal highway conditions.Easy InstallationThis intake kit can be installed in less than 60 minutes, making it a hassle-free upgrade for your vehicle. For detailed installation instructions, please refer to our Installation Instructions.Compatibility & Legal InfoDesigned for select 2017–2019 Chevrolet Silverado and GMC Sierra models, please check our dedicated fitment tool for complete vehicle compatibility. Note that some intakes may not be legal for sale or use on any pollution-controlled motor vehicles in California.For more performance upgrades, explore our Air Intake Systems collection.

Experience an impressive boost in performance with this high-performance intake kit designed for the 2016–2017 Cadillac ATS-V. Engineered to enhance your engine’s efficiency, this kit increases airflow to deliver quicker throttle response, a more aggressive engine sound, and an overall improvement in horsepower and torque.Key Features• High-density polyethylene (HDPE) roto-molded intake tube optimized for maximum airflow• Washable, reusable high-flow air filter featuring premium oiled cotton media that lasts up to 100,000 miles under typical highway conditions• Custom-engineered heat shield that safeguards intake air from high engine bay temperatures• Quick installation—most users complete installation in under 60 minutes• Precision fitment engineered exclusively for the 2016–2017 Cadillac ATS-V• Note: Some intakes may not be legal for sale or use on pollution-controlled vehicles in California; check the CARB status for your vehicleInstallation ProcessInstallation is straightforward with basic hand tools. For complete instructions, please review our Installation Instructions and accompanying User Guide.Why Choose This Kit?Upgrade your vehicle with confidence. Enjoy enhanced performance over standard OEM systems, improved durability, and superior airflow that elevates your driving experience. If you’re ready for a premium performance upgrade, this intake kit is engineered to meet your high standards.Elevate your ATS-V and discover additional performance solutions in our Air Intake Systems collection. Purchase now and experience the difference on every drive!

Upgrade your fleet vehicles and protect your investment from grid heater bolt failure. Don't let the stock elbow and heater kill performance or your engine. Get back all that power you lose with 88.3 percent greater Mass Air Flow for a more responsive, reliable, power-efficient engine. What it doesThe Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank's High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.The complete systemBanks' High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.How it was designedUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No.1 fuel line. Banks Engineers designed a new No.1 fuel line, allowing the Monster-Ram to flow more air without obstruction.ExpandableWith four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.Beats the competitionLike all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.This Part Fits: Year Make Model Submodel 2019-2024 Ram 3500 Big Horn 2019-2024 Ram 3500 Laramie 2019-2020 Ram 3500 Laramie Longhorn 2019-2024 Ram 3500 Limited 2021-2024 Ram 3500 Limited Longhorn 2019-2022 Ram 3500 Lone Star 2019-2024 Ram 3500 SLT 2024 Ram 3500 Special Service 2019-2024 Ram 3500 Tradesman

The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2019-2024 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it doesThe Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks&rsquo, High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.The complete systemBanks' High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.How it was designedUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.ExpandableWith four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.Beats the competitionLike all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.This Part Fits: Year Make Model Submodel 2019-2024 Ram 2500 Big Horn 2019-2024 Ram 2500 Laramie 2019-2021 Ram 2500 Laramie Longhorn 2019-2024 Ram 2500 Limited 2021-2024 Ram 2500 Limited Longhorn 2019-2024 Ram 2500 Lone Star 2023-2024 Ram 2500 Rebel 2024 Ram 2500 Special Service 2019-2024 Ram 2500 Tradesman 2019-2024 Ram 3500 Big Horn 2019-2024 Ram 3500 Laramie 2019-2020 Ram 3500 Laramie Longhorn 2019-2024 Ram 3500 Limited 2021-2024 Ram 3500 Limited Longhorn 2019-2022 Ram 3500 Lone Star 2019-2024 Ram 3500 SLT 2024 Ram 3500 Special Service 2019-2024 Ram 3500 Tradesman

The AIRAID Premium Filter is a performance, high air flow air filter that is designed to increase horsepower and torque for your engine. The air filter is constructed with multiple layers of filter media combined with AIRAID's unique filtration technology resulting in a superior filtration system. AIRAID Premium Filters efficiently filter dirt particles in a way that ordinary cotton-gauze performance filters are unable to. Whether you have a custom application or simply want to upgrade another brand intake system with AIRAID's superior filter technology, you are sure to find a universal AIRAID Premium Filter for your needs. AIRAID air filters come in a variety of shapes and styles to suit more applications.

Volant Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, Volant Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This intake features Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This filter is specifically designed to allow the highest air flow rate possible for maximum power gains but deliver a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Whether On-Road or Off, Volant Performance has you covered.Technical BulletinInstallation InstructionsThis Part Fits: Year Make Model Submodel 2009-2012 Chevrolet Colorado LT 2009-2012 GMC Canyon SLE 2009-2012 GMC Canyon SLT

Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen?s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!Installation InstructionsThis Part Fits: Year Make Model Submodel 2024-2025 Toyota Tacoma Limited 2024-2025 Toyota Tacoma SR 2024-2025 Toyota Tacoma SR5 2024-2025 Toyota Tacoma Trailhunter 2024-2025 Toyota Tacoma TRD Off-Road 2024-2025 Toyota Tacoma TRD PreRunner 2024-2025 Toyota Tacoma TRD Pro 2024-2025 Toyota Tacoma TRD Sport

Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen?s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!Installation InstructionsThis Part Fits: Year Make Model Submodel 2024-2025 Toyota Tacoma Limited 2024-2025 Toyota Tacoma SR 2024-2025 Toyota Tacoma SR5 2024-2025 Toyota Tacoma Trailhunter 2024-2025 Toyota Tacoma TRD Off-Road 2024-2025 Toyota Tacoma TRD PreRunner 2024-2025 Toyota Tacoma TRD Pro 2024-2025 Toyota Tacoma TRD Sport

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

This coupling features a 90° angle and is designed to connect to tubes with a 3-3/4” and 3-1/2” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects. Its silicone construction features a layer of polyester reinforcement, making it extremely durable and less prone to deformation, tearing, and other damage, than average couplings. Two corrosion-resistant stainless-steel worm clamps are included, providing a secure seal for virtually any application.

MAHLE Original Mini Cooper 14-07 Intake Manifold SetThis Part Fits: Year Make Model Submodel 2012-2015 Mini Cooper Coupe John Cooper Works 2012-2015 Mini Cooper Coupe S 2009-2015 Mini Cooper John Cooper Works 2009-2014 Mini Cooper John Cooper Works Clubman 2013 Mini Cooper John Cooper Works GP 2012-2015 Mini Cooper Roadster John Cooper Works 2012-2015 Mini Cooper Roadster S 2007-2015 Mini Cooper S 2008-2014 Mini Cooper S Clubman 2013-2016 Mini Cooper Countryman John Cooper Works ALL4 2011-2016 Mini Cooper Countryman S 2011-2016 Mini Cooper Countryman S ALL4 2013-2016 Mini Cooper Paceman John Cooper Works ALL4 2013-2016 Mini Cooper Paceman S 2013-2016 Mini Cooper Paceman S ALL4

MAHLE Original Ford Bronco 92-87 Plenum ChamberThis Part Fits: Year Make Model Submodel 1987-1992 Ford Bronco Custom 1987-1992 Ford Bronco Eddie Bauer 1990-1992 Ford Bronco XL 1987-1992 Ford Bronco XLT 1992 Ford Bronco XLT Nite 1992-1996 Ford E-150 Econoline Base 1987-1991 Ford E-150 Econoline Custom 1987-1996 Ford E-150 Econoline XL 1992-1996 Ford E-150 Econoline Club Wagon Chateau 1987-1996 Ford E-150 Econoline Club Wagon Custom 1987-1991 Ford E-150 Econoline Club Wagon XL 1987-1996 Ford E-150 Econoline Club Wagon XLT 1992-1996 Ford E-250 Econoline Base 1987-1991 Ford E-250 Econoline Custom 1987-1996 Ford E-250 Econoline XL 1987-1991 Ford E-250 Econoline Club Wagon Custom 1987-1991 Ford E-250 Econoline Club Wagon XL 1987-1991 Ford E-250 Econoline Club Wagon XLT 1992-1996 Ford E-350 Econoline Base 1987-1991 Ford E-350 Econoline Custom 1987-1996 Ford E-350 Econoline XL 1992-1996 Ford E-350 Econoline Club Wagon Chateau 1992-1996 Ford E-350 Econoline Club Wagon Chateau HD 1987-1996 Ford E-350 Econoline Club Wagon Custom 1992-1993 Ford E-350 Econoline Club Wagon Custom HD 1987-1991 Ford E-350 Econoline Club Wagon XL 1994-1996 Ford E-350 Econoline Club Wagon XL HD 1987-1989,1991-1996 Ford E-350 Econoline Club Wagon XLT 1992-1996 Ford E-350 Econoline Club Wagon XLT HD 1987-1992 Ford F-150 Custom 1995-1996 Ford F-150 Eddie Bauer 1995-1996 Ford F-150 Special 1987-1996 Ford F-150 XL 1993-1996 Ford F-150 XLT 1987-1992 Ford F-150 XLT Lariat 1987-1992 Ford F-250 Custom 1995-1996 Ford F-250 Eddie Bauer 1995-1996 Ford F-250 Special 1987-1996 Ford F-250 XL 1993-1996 Ford F-250 XLT 1987-1992 Ford F-250 XLT Lariat 1987-1992 Ford F-350 Custom 1995 Ford F-350 Eddie Bauer 1995-1996 Ford F-350 Special 1987-1991,1993-1996 Ford F-350 XL 1993-1996 Ford F-350 XLT 1987-1991 Ford F-350 XLT Lariat

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 4-1/16” to 4-3/8”.

Ideal for air intake system applications, our universal clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 1-9/16” to 2-1/2”.

MAHLE Original Mitsubishi Endeavor 08-04 Plenum ChamberThis Part Fits: Year Make Model Submodel 2004-2006 Mitsubishi Endeavor Limited 2004-2008,2010-2011 Mitsubishi Endeavor LS 2007-2008,2010-2011 Mitsubishi Endeavor SE 2004-2005 Mitsubishi Endeavor XLS 2004-2006 Mitsubishi Galant GTS 2004-2006 Mitsubishi Galant LS 2007-2008 Mitsubishi Galant Ralliart

MAHLE Original Hyundai Elantra 10-01 Intake Manifold SetThis Part Fits: Year Make Model Submodel 2010 Hyundai Elantra Blue 2002-2010 Hyundai Elantra GLS 2002-2006 Hyundai Elantra GT 2006-2007 Hyundai Elantra Limited 2007-2010 Hyundai Elantra SE 2009 Hyundai Elantra Touring 2010-2012 Hyundai Elantra Touring GLS 2010-2012 Hyundai Elantra Touring SE 2003-2004 Hyundai Tiburon Base 2005-2008 Hyundai Tiburon GS 2005-2006 Hyundai Tucson GL 2007-2009 Hyundai Tucson GLS 2008-2009 Hyundai Tucson Limited 2010-2011 Kia Soul ! 2010-2011 Kia Soul + 2010-2011 Kia Soul Sport 2004-2009 Kia Spectra EX 2004-2005,2007-2009 Kia Spectra LX 2005-2009 Kia Spectra SX 2005-2006 Kia Spectra5 Base 2007-2009 Kia Spectra5 SX 2005-2010 Kia Sportage LX

MAHLE Original Acura Rsx 06-02 Intake Manifold SetThis Part Fits: Year Make Model Submodel 2002-2006 Acura RSX Type-S 2002-2005 Honda Civic Si

ARB 23-25 Toyota 76/78/79 Series Facelift 4.5L Diesel V8 Armax Safari Snorkel

This Restore Kit was specifically developed for aFe POWER Pro 5R and Pro 10R air filters. Its regular use preserves the air filter’s original performance and engine protection. The POWER CLEANER effectively breaks down dirt and dust without damaging the media, while the oil captures debris during use. Simply apply the cleaner onto the filter element, let it soak, and rinse. Once its dry, the oil can be applied. Its blue color and quick absorbency make it easy to cover the element evenly. Take care to not over-oil the filter.Material Safety Data Sheet

Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 54-82322, 51-82322, 51-82322-E & 75-82322This Part Fits: Year Make Model Submodel 2015-2016 Chevrolet Silverado 2500 HD High Country 2011-2016 Chevrolet Silverado 2500 HD LT 2011-2016 Chevrolet Silverado 2500 HD LTZ 2011-2016 Chevrolet Silverado 2500 HD WT 2015-2016 Chevrolet Silverado 3500 HD High Country 2011-2016 Chevrolet Silverado 3500 HD LT 2011-2016 Chevrolet Silverado 3500 HD LTZ 2011-2016 Chevrolet Silverado 3500 HD WT 2015-2016 GMC Sierra 2500 HD Base 2011-2016 GMC Sierra 2500 HD Denali 2011-2016 GMC Sierra 2500 HD SLE 2011-2016 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2015-2016 GMC Sierra 3500 HD Base 2011-2016 GMC Sierra 3500 HD Denali 2011-2016 GMC Sierra 3500 HD SLE 2011-2016 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Durable Clear Polycarbonate Construction:With its durable injection molded polycarbonate construction, this filter sight window is resistant to cracking and impact. Its transparent finish allows for hassle-free filter inspection, without having to disassemble the cold air intake system.

MAHLE Original Chevrolet Cavalier 02-98 Intake Manifold SetThis Part Fits: Year Make Model Submodel 1998-2002 Chevrolet Cavalier Base 1998-2002 Chevrolet Cavalier LS 2002 Chevrolet Cavalier LS Sport 1998-1999 Chevrolet Cavalier RS 1998-2003 Chevrolet S10 Base 1998-2003 Chevrolet S10 LS 1999-2003 Chevrolet S10 Xtreme 1998-2003 GMC Sonoma SL 1998-2001 GMC Sonoma SLE 1998-2003 GMC Sonoma SLS 1998-2000 Isuzu Hombre S 1998-2000 Isuzu Hombre XS 2002 Pontiac Sunfire GT 1998-2002 Pontiac Sunfire SE