Vent tubes can be used to attach smog tubes, crank case ventilation tubes or other vacuum related accessories. Requires creating 1/4 inch NPT threaded fitting in filter base, valve cover or other assembly where used.

3-1/4 IN Internal Diameter: This 3 IN long coupling is designed to connect to a tube with a 3-1/4 IN diameter. It's commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Flexible Bellows Silicone: Its bellows design is extremely flexible, making it easy to install, even when dealing with misaligned tubes. It allows for ample expansion, movement and vibration in-between two hard pipes.Stainless Steel Clamps: Two corrosion-resistant stainless-steel worm clamps (#052) are included, providing a secure seal for virtually any application.Fitment Note: Not for use on pressurized side of supercharged or turbocharged applications.Direct Replacement for P/N 05-01480.

The high temperature injection molded silicone elbow reducer coupler is designed to connect to a (3"x2-1/2")OD tube. Standard stainless steel worm-gear #044 & #048 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications.

The high temperature injection molded silicone bellow reducer coupler is designed to connect to a (2-3/8 x 2-1/2")OD tube and is 2-1/2" long. Standard stainless steel worm-gear #044 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications.

This coupling features a 90° angle and is designed to connect to tubes with a 3-3/4” and 3-1/2” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects. Its silicone construction features a layer of polyester reinforcement, making it extremely durable and less prone to deformation, tearing, and other damage, than average couplings. Two corrosion-resistant stainless-steel worm clamps are included, providing a secure seal for virtually any application.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 4-1/16” to 4-3/8”.

Ideal for air intake system applications, our universal clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 1-9/16” to 2-1/2”.

Just one look at the Rugged Ridge AmFib Snorkel System for Wrangler JL & Gladiator JT models and you know this is not your typical snorkel. We designed the Low Mount Snorkel to make a visual splash by devising a base that blends seamlessly with the factory cowl panel and then topped it off with a low air intake that instantly becomes the focal point that you can't take your eyes off of. While making such a big splash is great, our quest for a superior snorkel went far beyond the visual. We engineered the entire AmFib snorkel inside the Jeep to literally make waves, by designing a system that is over-engineered to be less invasive, performs better and installs easier than any snorkel we've ever built before. The entire system and its components look 'at-home', as though they we're part of the Jeeps original design. But where the rubber really meets the road is where the AmFib Snorkel truly shines…Quickly swap the low air intake for the High Mount Intake and you can defy water crossings with total confidence. Patents Pending and U.S. Patent 8,960,347WarrantyThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2007-2018 Jeep Wrangler Rubicon 2007-2017 Jeep Wrangler Sahara 2010-2018 Jeep Wrangler Sport 2016,2018 Jeep Wrangler Sport S 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2018 Jeep Wrangler Unlimited Moab 2007-2018 Jeep Wrangler Unlimited Rubicon 2007-2018 Jeep Wrangler Unlimited Sahara 2010-2018 Jeep Wrangler Unlimited Sport 2016,2018 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

aFe POWER Red Edition Dynamic Air Scoop XL for Intake Kits 50-70119D and 50-70119R

3-1/8 IN Internal Diameter: This 4-1/2 IN long coupling is designed to connect to a tube with a 3-1/8 IN diameter. It's commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Flexible Bellows Silicone: Its bellows design is extremely flexible, making it easy to install, even when dealing with misaligned tubes. It allows for ample expansion, movement and vibration in-between two hard pipes. The built-in port holes (5/8 IN ID x 1 IN H and 3/16 IN ID x 1/2 IN H) allow for easy connection to PCV lines.Stainless Steel Clamps: Two corrosion-resistant stainless-steel worm clamps (#052) are included, providing a secure seal for virtually any application.Fitment Note: Not for use on pressurized side of supercharged or turbocharged applications.Direct Replacement for P/N 05-01404.

Ideal for air intake system applications, our universal clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 2-9/16” to 3-1/2”.

K&N rubber hose couplers are designed to connect intake tubes for custom do-it-yourself racing air intake applications or used as a replacement part. K&N couplers are constructed from high-quality reinforced rubber and made to last. This coupler connects two 4 inch tubes and is 2 inches in length.

The high temperature 2-PLY reinforced silicone hump coupler is designed to connect to a (4") OD tube and is 3" long. Standard stainless steel worm-gear #064 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications.

K&N offers a wide selection of automotive air filter custom assembly parts to give your vehicle a show car look under the hood. The K&N 06801 is a steel metal top plate designed for an air filter assembly.

Ideal for air intake system applications, our universal clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 3-5/16” to 4-1/4”.

Ideal for air intake system applications, our universal clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 3-1/16” to 4”.

Unleash the true potential of your truck’s air intake system with the aFe POWER Dynamic Air Scoop XL (D.A.S. XL). Designed as a direct replacement for your factory radiator cover, this bold and aggressive upgrade captures the coolest air possible directly from the front grille — feeding it efficiently into your Momentum GT air intake system. Crafted from high-grade cross-linked polyethylene (XLPE), this scoop offers unmatched heat resistance and long-lasting durability. Unlike traditional add-on scoops or ducts, the aFe POWER D.A.S. XL is a complete replacement for the factory radiator cover. This allows it to pull in fresh, cool air from the very front of the vehicle without restriction — delivering a noticeable improvement in airflow and intake efficiency. The result is better throttle response and increased power potential. This massive scoop was engineered specifically for use with the aFe POWER Momentum GT air intake system. Its design connects perfectly to the intake air box, creating a direct path for cold air to reach your engine. The aFe POWER D.A.S. XL doubles the inlet surface area compared to the factory scoop, significantly increasing the volume of incoming air. This optimized route minimizes heat soak and maximizes air density — crucial for high-performance applications. Constructed from XLPE (cross-linked polyethylene), the D.A.S. XL offers high resistance to heat, chemicals, and impact. This material choice not only ensures longevity under extreme engine bay conditions, but also provides structural strength that maintains airflow integrity over time. The D.A.S. XL doesn’t just perform — it transforms the look of your engine bay. With its aggressive design, this scoop is a massive, high-impact piece that elevates the appearance of your truck. It’s a visual cue that performance lives under the hood.

K&N's carbon fiber composites have an attractive cosmetic appeal, and the outstanding stiffness to weight ratio that is needed to stay competitive in today's racing industry. Carbon fiber composites have taken the method traditionally associated with fiberglass and perfected it to a precise science with outstanding performance as the result.

This engineered intake tube increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.This Part Fits: Year Make Model Submodel 1999-2003 Ford F-250 Super Duty Lariat 1999-2003 Ford F-250 Super Duty XL 1999-2003 Ford F-250 Super Duty XLT 2003 Ford F-350 Super Duty King Ranch 1999-2003 Ford F-350 Super Duty Lariat 1999-2003 Ford F-350 Super Duty XL 1999-2003 Ford F-350 Super Duty XLT

3-Ply Reinforced Black Silicone: Constructed of 3-ply reinforced silicone, this torque boost tube is resistant to cracking and hi-temp conditions. With a smooth interior surface, this torque booster tube is engineered to increase HP, Torque & air flow by reducing turbulence.Hassle-Free Installation: This torque booster tube connects the billet 3-angle adaptor on the Stage-1 system to the intake manifold. With two stainless steel clamps, this part is a quick and easy bolt-on, requiring no cutting or drilling on OEM parts for hassle-free installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2001-2006 BMW M3 Base

This engineered intake tube increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003,2005-2007 Dodge Ram 2500 Laramie 2003-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2003-2007 Dodge Ram 2500 ST 2006-2007 Dodge Ram 2500 TRX4 2003-2007 Dodge Ram 3500 Laramie 2003-2007 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2003-2007 Dodge Ram 3500 ST 2007 Dodge Ram 3500 TRX4

Ideal for air intake system applications, our universal clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 3” to 5”.

aFe POWER Magnum FORCE 3/4 IN reinforced fuel hose. This item is designed to directly replace the hose provided in specific aFe POWER products. An itemized product list is provided in all aFe POWER instructions outlining where, or if, application(s) apply.

he high temperature 3-PLY reinforced silicone straight coupler is designed to connect to a (3") ID tube and is 2" long. Standard stainless steel worm-gear #048 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications.

4-1/4 IN to 4 IN Reducer: This coupling features a 90 Degree angle and is designed to connect to tubes with a 4 IN and 4-1/4 IN diameter. It's commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Silicone Construction: Its silicone construction features four layers of polyester reinforcement, making it less prone to deformation, tearing, and other damage, than average couplings. Its extreme durability makes it perfect for forced induction applications. The built-in fitting (3/4 IN OD x 1 IN L) allows for easy connection to a PCV line.Stainless Steel Clamps: Two corrosion-resistant stainless-steel worm clamps (#064 & #072) are included, providing a secure seal for virtually any application.Direct Replacement for P/N 05-01464.

Strong, Flexible Construction: This edge trims EPDM construction is durable, withstanding temperatures from -40 Degree F to 212 Degree F (-40 Degree C to 100 Degree C). It retains its ample flexibility at low temperatures, making installation a breeze.For a Variety of Uses: Its designed to attach perfectly to 1/16 thick edges and will fit edges ranging from 1/32 to 1/8 thick. This edge trim fits a wide range of aFe POWER™s Takeda and Magnum FORCE cold air intake systems, but can be used for a variety of other applications as well. Its most commonly used to replace existing worn-out trim. For aFe POWER parts, refer to your cold air intake™s instruction sheet to confirm the required edge trim size.Direct Replacement for P/N 05-00149.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 5-5/16” to 5-5/8”.

aFe POWER Magnum FORCE 5/8 IN reinforced fuel hose. This item is designed to directly replace hoses provided with aFe POWER products.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 6-13/16” to 7-1/8”.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 5-5/16” to 5-5/8”.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 5-9/16” to 5-7/8”.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 4-13/16” to 5-1/8”.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 4-9/16” to 4-7/8”.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 4-5/16” to 4-5/8”.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 3-13/16” to 4-1/8”.

Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 3-9/16” to 3-7/8”.