This 7” tall 360-degree radial flow air filter features a 5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street use. This kit includes a Magnum SHIELD Pre-Filter to protect your performance air filter from large debris and water splash. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It connects to the vehicle’s factory air inlet with no additional hardware. The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. This kit has a 53% weight reduction compared to the OEM intake. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Track Series intakes are designed with fewer parts for a fast and easy installation.Installation Instructions

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a mild sound. This system produces a mild sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2019-2024 Audi Q3 Premium 2019-2024 Audi Q3 Premium Plus 2019 Audi Q3 Prestige 2020-2022 Audi Q3 S-Line Premium 2020-2022 Audi Q3 S-Line Premium Plus 2020 Audi Q3 S-Line Prestige

This MACH Force-Xp axle-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a mild yet deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design this system the fitment is precise and requires no modifications.

This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. This intake is designed to fit models equipped with the factory strut brace, with no modification required.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2025 BMW Z4 M40i 2024 Toyota GR Supra 45th Anniversary Edition 2021-2022 Toyota GR Supra A91 Edition 2023 Toyota GR Supra A91-MT Edition 2020-2024 Toyota GR Supra Base 2020 Toyota GR Supra Launch Edition 2020-2024 Toyota GR Supra Premium

This 7” tall 360-degree radial flow air filter features a 4” flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. This intake is designed to fit models equipped with the factory strut brace, with no modification required.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2025 BMW Z4 M40i 2024 Toyota GR Supra 45th Anniversary Edition 2021-2022 Toyota GR Supra A91 Edition 2023 Toyota GR Supra A91-MT Edition 2020-2024 Toyota GR Supra Base 2020 Toyota GR Supra Launch Edition 2020-2024 Toyota GR Supra Premium

This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2" diameter 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This exhaust system is constructed with a no mufflers or resonators for maximum flow and a deep sound, unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2021 Kia Forte GT

Enhance your Subaru Outback's capabilities with the Terra Guard Trail Bumper! Crafted from robust tubular steel, this heavy-duty front bumper guard ensures maximum protection and off-road utility. Integrated recovery shackle mounts offer added safety for any off-road adventure. Illuminate your path with up to six 6-inch diameter lights. No need for complicated installations; this bumper fits seamlessly without drilling or cutting. Embrace the outdoors with Terra Guard! Crafted from heavy-gauge tubular steel, 1-1/2 inch diameter x 1/8 inch wall this robust bumper is built to withstand the toughest challenges on and off the road. Features integrated recovery shackle mounts, allowing you to easily connect shackles for quick and secure recoveries (shackles not included). Equipped with convenient light tabs, the Terra Guard Bumper can hold up to four 6-inch diameter lights, ensuring exceptional visibility during nighttime adventures (lights not included). Finished in a sleek black powder coating, the Terra Guard Bumper not only ensures long-lasting durability but also adds a rugged look to your vehicle's appearance.Installation Instructions

Dual 4” Flange 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, and in most cases deliver the highest power gains of our filter media options. This media is perfect for street and/or track use. Their inverted tops make for more filter surface area, resulting in longer service intervals. The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation. All the factory harness and mounts are transferred to the back of the aFe POWER housing for a factory-like installation. The radio antenna plastic melded on the factory air box is also transferred to the aFe POWER housing. The removal of the antenna from the factory air box requires two plastic melted mounting tabs to be cut off. This system features a high-quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This setup allows for more aggressive air intake noise while not sacrificing any performance. Premium stainless-steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.Installation Instructions

Dual 4” Flange 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted tops make for more filter surface area, resulting in longer service intervals. The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This set up allows for more aggressive air intake noise while not sacrificing any performance. Premium stainless-steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.Installation Instructions

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021 Ford Explorer King Ranch 2020-2021 Ford Explorer Platinum 2020-2021 Ford Explorer ST 2020-2021 Lincoln Aviator Base 2020-2021 Lincoln Aviator Black Label 2020-2021 Lincoln Aviator Reserve

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in textured red powder coating with a unique laser-etched aFe POWER logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021 Ford Explorer King Ranch 2020-2021 Ford Explorer Platinum 2020-2021 Ford Explorer ST 2020-2021 Lincoln Aviator Base 2020-2021 Lincoln Aviator Black Label 2020-2021 Lincoln Aviator Reserve

This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 5" diameter polished 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2020-2025 Chevrolet Silverado 2500 HD Custom 2020-2025 Chevrolet Silverado 2500 HD High Country 2020-2025 Chevrolet Silverado 2500 HD LT 2020-2025 Chevrolet Silverado 2500 HD LTZ 2020-2025 Chevrolet Silverado 2500 HD WT 2020-2025 Chevrolet Silverado 3500 HD High Country 2020-2025 Chevrolet Silverado 3500 HD LT 2020-2025 Chevrolet Silverado 3500 HD LTZ 2020-2025 Chevrolet Silverado 3500 HD WT 2020-2025 GMC Sierra 2500 HD AT4 2024-2025 GMC Sierra 2500 HD AT4X 2020-2021 GMC Sierra 2500 HD Base 2020-2025 GMC Sierra 2500 HD Denali 2022-2025 GMC Sierra 2500 HD Pro 2020-2025 GMC Sierra 2500 HD SLE 2020-2025 GMC Sierra 2500 HD SLT 2020-2025 GMC Sierra 3500 HD AT4 2020-2021 GMC Sierra 3500 HD Base 2020-2025 GMC Sierra 3500 HD Denali 2022-2025 GMC Sierra 3500 HD Pro 2020-2025 GMC Sierra 3500 HD SLE 2020-2025 GMC Sierra 3500 HD SLT

Dramatically increase ground clearance on your Subaru while maintaining factory ride quality with the aFe CONTROL Lift Kit. With our 2” lift you can easily fit larger off-road tire packages to take on the most rugged terrain. Engineered to maintain proper suspension geometry, we designed our offset front spacers to correct camber and include rear subframe spacers to retain proper control arm geometry & axle angles. Our lift spacers are CNC laser cut to strict tolerances. These are robotically welded in a dedicated fixture. This ensures precise fit and consistent manufacturing. The front spacers are designed with offset plates to correct for positive camber gained when lifting. This offset allows you to restore camber back to factory settings after lifting. To properly lift the rear ride height, the rear subframe must be spaced down to retain correct suspension geometry and alignment. This also helps keep the axles at optimal angles and prolongs CV joint life. The subframe spacers are machined out of 6061 T6 aluminum and are anodized black.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2024 Subaru Outback Base 2020-2024 Subaru Outback Limited 2020-2024 Subaru Outback Limited XT 2023-2024 Subaru Outback Onyx Edition 2020-2024 Subaru Outback Onyx Edition XT 2020-2024 Subaru Outback Premium 2020-2024 Subaru Outback Touring 2020-2024 Subaru Outback Touring XT 2022-2024 Subaru Outback Wilderness

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a mild sound. This system produces a mild sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2020-2021 Volkswagen Atlas Cross Sport S 2020-2024 Volkswagen Atlas Cross Sport SE 2020-2021 Volkswagen Atlas Cross Sport SE R-Line 2020-2024 Volkswagen Atlas Cross Sport SEL 2020-2021 Volkswagen Atlas Cross Sport SEL Premium 2020-2024 Volkswagen Atlas Cross Sport SEL Premium R-Line 2020-2022,2024 Volkswagen Atlas Cross Sport SEL R-Line 2023 Volkswagen Atlas Cross Sport SEL R-Line Black

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. These charge pipes feature factory style billet aluminum quick-connect adapter with an o-ring to ensure a leak-free fit while maintaining superior strength and durability. Finished in textured red powder coating with a unique laser-etched aFe power logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2019 Genesis G70 Advanced 2020-2022 Genesis G70 Base 2019 Genesis G70 Design 2019 Genesis G70 Dynamic 2019-2020 Genesis G70 Elite 2022 Genesis G70 Launch Edition 2019-2021 Genesis G70 Prestige 2019,2021 Genesis G70 Sport 2018-2021 Kia Stinger GT 2018-2022 Kia Stinger GT1 2018-2023 Kia Stinger GT2 2019 Kia Stinger GTS 2023 Kia Stinger Tribute Edition

Every aFe CONTROL sway bar is CAD designed and CNC bent to strict tolerances. This insures precise fit and perfect operation. aFe Control front & rear sway bars are 3-way adjustable. This allows the driver to dial in the front and rear roll resistance to achieve the desired handling bias. The front sway bar utilizes CNC machined ends and the rear has waterjet cut plate ends. These are TIG welded to the bar in a special fixture to insure accurate hole positioning and consistent manufacturing. aFe Control includes low deflection polyurethane bushings and premium 6061-T6 aluminum black anodized billet brackets.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2024 Chevrolet Corvette Stingray

Dual 4” Flange 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, and in most cases deliver the highest power gains of our filter media options. This media is perfect for street and/or track use. Their inverted tops make for more filter surface area, resulting in longer service intervals. Lightweight twill weave carbon fiber tube directs the filtered air from the dual air filters to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of 100% carbon fiber material (No fiberglass). The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation. The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This set up allows for more aggressive air intake noise while not sacrificing any performance. Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.Installation InstructionsThis Part Fits: Year Make Model Submodel 2020-2025 Chevrolet Corvette Stingray

This DPF-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This exhaust system is finished off with a 4 IN hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents, protecting the exhaust over rough terrain. It features a high temperature black powder-coated finish and patent pending intercooled design, that reduces exhaust gas temperatures. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This DPF-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2022 Jeep Gladiator Altitude 2021-2023 Jeep Gladiator High Altitude 2021-2023 Jeep Gladiator Overland 2021-2023 Jeep Gladiator Rubicon 2021-2023 Jeep Gladiator Sport 2021-2023 Jeep Gladiator Sport S 2021 Jeep Gladiator Texas Trail 2021-2023 Jeep Gladiator Willys 2021-2023 Jeep Gladiator Willys Sport

This cat-back exhaust system has a turn down tip under the vehicle, before the rear axle, to take on rough terrain and off-road obstacles. No more smashed or lost tips to worry about. A free-flowing stainless steel muffler with internal “X” is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. This exhaust system uses all factory mounting locations, and quality hardware for a 360-degree sealing surface and hassle-free installation. Factory style hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for a long lasting, factory style fit.This Part Fits: Year Make Model Submodel 2021-2024 Jeep Wrangler Unlimited Rubicon 392

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increases turbo boost, thus Improving vehicle performance and throttle response. This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. SCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors, plugs directly into the stock wiring harness connectors and sensors. SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024-2025 Lexus GX550 Luxury 2024-2025 Lexus GX550 Luxury+ 2024-2025 Lexus GX550 Overtrail 2024-2025 Lexus GX550 Overtrail+ 2024-2025 Lexus GX550 Premium 2024-2025 Lexus GX550 Premium+ 2022-2024 Lexus LX600 Base 2022-2024 Lexus LX600 F Sport 2022-2024 Lexus LX600 Luxury 2022-2024 Lexus LX600 Premium 2022-2024 Lexus LX600 Ultra Luxury 2022-2024 Toyota Tundra 1794 Edition 2022-2024 Toyota Tundra Limited 2022-2024 Toyota Tundra Platinum 2022-2024 Toyota Tundra SR 2022-2024 Toyota Tundra SR5

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in textured red powder coating with a unique laser-etched aFe power logo for a custom look.Installation Instructions

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe power logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2024 Toyota Tundra 1794 Edition 2022-2024 Toyota Tundra Limited 2022-2024 Toyota Tundra Platinum 2022-2024 Toyota Tundra SR 2022-2024 Toyota Tundra SR5

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. These 8” tall 360-degree radial flow air filters feature a 3" flange and our pre-oiled black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while its expanded metal provides impact protection. These one-piece sealed housings, constructed of heat-resistant orange XLPE (cross-linked polyethylene) polymer, feature our patent-pending filter-to-housing interface. Their innovative design minimizes the total number of parts, making for an easy installation. Two clear sight windows allow for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. High quality premium clamps and silicone bellow couplings are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023-2025 Toyota Sequoia Capstone 2023-2025 Toyota Sequoia Limited 2023-2025 Toyota Sequoia Platinum 2023-2025 Toyota Sequoia SR5 2023-2025 Toyota Sequoia TRD Pro 2022-2024 Toyota Tundra 1794 Edition 2022-2024 Toyota Tundra Capstone 2022-2024 Toyota Tundra Limited 2022-2024 Toyota Tundra Platinum 2022-2024 Toyota Tundra SR 2022-2024 Toyota Tundra SR5 2022-2024 Toyota Tundra TRD Pro

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. These 8” tall 360-degree radial flow air filters feature a 3" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Their expanded metal provides impact protection. These one-piece sealed housings, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, feature our patent-pending filter-to-housing interface. Their innovative design minimizes the total number of parts, making for an easy installation. Two clear sight windows allow for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. High quality premium clamps and silicone bellow couplings are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2023-2025 Toyota Sequoia Capstone 2023-2025 Toyota Sequoia Limited 2023-2025 Toyota Sequoia Platinum 2023-2025 Toyota Sequoia SR5 2023-2025 Toyota Sequoia TRD Pro 2022-2024 Toyota Tundra 1794 Edition 2022-2024 Toyota Tundra Capstone 2022-2024 Toyota Tundra Limited 2022-2024 Toyota Tundra Platinum 2022-2024 Toyota Tundra SR 2022-2024 Toyota Tundra SR5 2022-2024 Toyota Tundra TRD Pro

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. These 8” tall 360-degree radial flow air filters feature a 3" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while its expanded metal provides impact protection. These one-piece sealed housings, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, feature our patent-pending filter-to-housing interface. Their innovative design minimizes the total number of parts, making for an easy installation. Two clear sight windows allow for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. High quality premium clamps and silicone bellow couplings are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2023-2025 Toyota Sequoia Capstone 2023-2025 Toyota Sequoia Limited 2023-2025 Toyota Sequoia Platinum 2023-2025 Toyota Sequoia SR5 2023-2025 Toyota Sequoia TRD Pro 2022-2024 Toyota Tundra 1794 Edition 2022-2024 Toyota Tundra Capstone 2022-2024 Toyota Tundra Limited 2022-2024 Toyota Tundra Platinum 2022-2024 Toyota Tundra SR 2022-2024 Toyota Tundra SR5 2022-2024 Toyota Tundra TRD Pro

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter blue flame stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Nissan Z Nismo 2023-2024 Nissan Z Performance 2023 Nissan Z Proto Spec 2023-2024 Nissan Z Sport

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter polished stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Nissan Z Nismo 2023-2024 Nissan Z Performance 2023 Nissan Z Proto Spec 2023-2024 Nissan Z Sport

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter carbon fiber stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Nissan Z Nismo 2023-2024 Nissan Z Performance 2023 Nissan Z Proto Spec 2023-2024 Nissan Z Sport

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a mild sound. Finishing off this exhaust system are dual 4-1/2 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023-2025 Mazda CX-50 2.5 S 2023-2025 Mazda CX-50 2.5 Turbo 2025 Mazda CX-50 Hybrid Preferred 2025 Mazda CX-50 Hybrid Premium 2025 Mazda CX-50 Hybrid Premium Plus

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a mild sound. Finishing off this exhaust system are dual 4-1/2 IN diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023-2025 Mazda CX-50 2.5 S 2023-2025 Mazda CX-50 2.5 Turbo

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a mild sound. Finishing off this exhaust system are dual 4-1/2 IN diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023-2025 Mazda CX-50 2.5 S 2023-2025 Mazda CX-50 2.5 Turbo

This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.This Part Fits: Year Make Model Submodel 2024-2025 Ford Ranger Raptor

This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.This Part Fits: Year Make Model Submodel 2024-2025 Ford Ranger Raptor

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, spring-loaded t-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapters with o-ring seals to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024-2025 Chevrolet Silverado 2500 HD Custom 2024-2025 Chevrolet Silverado 2500 HD High Country 2024-2025 Chevrolet Silverado 2500 HD LT 2024-2025 Chevrolet Silverado 2500 HD LTZ 2024-2025 Chevrolet Silverado 2500 HD WT 2024-2025 Chevrolet Silverado 2500 HD ZR2 2024-2025 Chevrolet Silverado 3500 HD High Country 2024-2025 Chevrolet Silverado 3500 HD LT 2024-2025 Chevrolet Silverado 3500 HD LTZ 2024-2025 Chevrolet Silverado 3500 HD WT 2024-2025 GMC Sierra 2500 HD AT4 2024-2025 GMC Sierra 2500 HD AT4X 2024-2025 GMC Sierra 2500 HD Denali 2024-2025 GMC Sierra 2500 HD Denali Ultimate 2024-2025 GMC Sierra 2500 HD Pro 2024-2025 GMC Sierra 2500 HD SLE 2024-2025 GMC Sierra 2500 HD SLT 2024-2025 GMC Sierra 3500 HD AT4 2017 GMC Sierra 3500 HD Base 2017,2024-2025 GMC Sierra 3500 HD Denali 2024-2025 GMC Sierra 3500 HD Denali Ultimate 2024-2025 GMC Sierra 3500 HD Pro 2017,2024-2025 GMC Sierra 3500 HD SLE 2017,2024-2025 GMC Sierra 3500 HD SLT

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a throaty sound. Finishing off this exhaust system is a 4-1/2 IN diameter stainless steel clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2024 Toyota Tacoma Limited 2024 Toyota Tacoma SR 2024 Toyota Tacoma SR5 2024 Toyota Tacoma Trailhunter 2024 Toyota Tacoma TRD Off-Road 2024 Toyota Tacoma TRD PreRunner 2024 Toyota Tacoma TRD Pro 2024 Toyota Tacoma TRD Sport

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a throaty sound. Finishing off this exhaust system is a 4-1/2 IN diameter stainless steel clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.This Part Fits: Year Make Model Submodel 2024 Toyota Tacoma Limited 2024 Toyota Tacoma SR 2024 Toyota Tacoma SR5 2024 Toyota Tacoma Trailhunter 2024 Toyota Tacoma TRD Off-Road 2024 Toyota Tacoma TRD PreRunner 2024 Toyota Tacoma TRD Pro 2024 Toyota Tacoma TRD Sport