Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2010-2023 Lexus GX460 Base 2023 Lexus GX460 Black Line Edition 2014-2023 Lexus GX460 Luxury 2010-2023 Lexus GX460 Premium 2023 Toyota 4Runner 40th Anniversary Edition 2010-2024 Toyota 4Runner SR5 2018-2024 Toyota 4Runner SR5 Premium 2010-2016,2021-2022 Toyota 4Runner Trail 2017-2024 Toyota 4Runner TRD Off-Road 2018-2024 Toyota 4Runner TRD Off-Road Premium 2015-2024 Toyota 4Runner TRD Pro 2020-2021 Toyota 4Runner Venture 2010-2014 Toyota FJ Cruiser Base

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2014-2018 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2015-2020 Chevrolet Tahoe LS 2015-2020 Chevrolet Tahoe LT 2014-2018 GMC Sierra 1500 Base 2014 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE 2015-2020 GMC Yukon SLE 2015-2020 GMC Yukon SLT

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Product Brochure - a specific brochure describing a ProductWarrantyInstallation InstructionsMaterial Safety Data SheetThis Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2014-2018 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2014-2018 GMC Sierra 1500 Base 2014 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2015-2022 Chevrolet Colorado LT 2015-2022 Chevrolet Colorado WT 2015-2022 Chevrolet Colorado Z71 2018-2020 GMC Canyon All Terrain 2021-2022 GMC Canyon AT4 2015-2020 GMC Canyon Base 2017-2022 GMC Canyon Denali 2021-2022 GMC Canyon Elevation 2021-2022 GMC Canyon Elevation Standard 2015-2020 GMC Canyon SLE 2015-2020 GMC Canyon SLT

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Material Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 2019-2023 Ford Ranger Lariat 2019-2023 Ford Ranger XL 2019-2023 Ford Ranger XLT

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Material Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 2019-2024 Chevrolet Silverado 1500 Custom Trail Boss 2019-2024 Chevrolet Silverado 1500 LT Trail Boss 2022 Chevrolet Silverado 1500 LTD LT Trail Boss 2019-2024 GMC Sierra 1500 AT4 2022 GMC Sierra 1500 Limited AT4

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.WarrantyInstallation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductThis Part Fits: Year Make Model Submodel 2019-2024 Chevrolet Silverado 1500 Custom 2019-2024 Chevrolet Silverado 1500 High Country 2019-2024 Chevrolet Silverado 1500 LT 2019-2024 Chevrolet Silverado 1500 LTZ 2019-2024 Chevrolet Silverado 1500 RST 2019-2024 Chevrolet Silverado 1500 WT 2022 Chevrolet Silverado 1500 LTD High Country 2022 Chevrolet Silverado 1500 LTD LT 2022 Chevrolet Silverado 1500 LTD LTZ 2022 Chevrolet Silverado 1500 LTD RST 2022 Chevrolet Silverado 1500 LTD WT 2019-2021 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2024 GMC Sierra 1500 Elevation 2022-2024 GMC Sierra 1500 Pro 2019-2024 GMC Sierra 1500 SLE 2019-2024 GMC Sierra 1500 SLT 2022 GMC Sierra 1500 Limited Elevation 2022 GMC Sierra 1500 Limited Pro 2022 GMC Sierra 1500 Limited SLE 2022 GMC Sierra 1500 Limited SLT

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2019-2024 Ram 1500 Big Horn 2019-2024 Ram 1500 Laramie 2019-2021 Ram 1500 Laramie Longhorn 2021-2024 Ram 1500 Limited Longhorn 2019-2024 Ram 1500 Lone Star 2021 Ram 1500 Longhorn 2019-2024 Ram 1500 Rebel 2019-2024 Ram 1500 Tradesman

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2021-2022 Ford Bronco Wildtrak

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2001 Toyota 4Runner Base 1996-2002 Toyota 4Runner Limited 1996-2002 Toyota 4Runner SR5

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 1996-2004 Toyota Tacoma Base 1998-2000 Toyota Tacoma Limited 1998-2004 Toyota Tacoma Pre Runner 1996-2000 Toyota Tacoma SR5

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2001-2007 Toyota Sequoia Limited 2001-2007 Toyota Sequoia SR5 2000-2006 Toyota Tundra Limited 2000-2006 Toyota Tundra SR5

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2004-2008 Ford F-150 FX4 2006-2008 Ford F-150 Harley-Davidson Edition 2005-2008 Ford F-150 King Ranch 2004-2008 Ford F-150 Lariat 2008 Ford F-150 Limited 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2008 Ford F-150 XL 2004-2008 Ford F-150 XLT 2006-2008 Lincoln Mark LT Base

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2009-2013 Chevrolet Silverado 1500 Hybrid 2007-2013 Chevrolet Silverado 1500 LS 2007-2013 Chevrolet Silverado 1500 LT 2007-2013 Chevrolet Silverado 1500 LTZ 2007-2013 Chevrolet Silverado 1500 WT 2009-2013 GMC Sierra 1500 Hybrid 2007-2013 GMC Sierra 1500 SL 2007-2013 GMC Sierra 1500 SLE 2007-2013 GMC Sierra 1500 SLT 2007-2013 GMC Sierra 1500 WT

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2008-2011,2013-2021 Toyota Land Cruiser Base 2020-2021 Toyota Land Cruiser Heritage Edition

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016-2020 Ford F-150 Limited 2015-2020 Ford F-150 Platinum 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.Installation InstructionsMaterial Safety Data SheetProduct Brochure - a specific brochure describing a ProductWarrantyThis Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX4 2011-2018 Ram 1500 Big Horn 2012-2018 Ram 1500 Express 2011-2018 Ram 1500 Laramie 2014 Ram 1500 Laramie Limited 2011-2018 Ram 1500 Laramie Longhorn 2014-2018 Ram 1500 Lone Star 2011-2016 Ram 1500 Outdoorsman 2011-2018 Ram 1500 SLT 2011-2018 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Big Horn 2019-2022 Ram 1500 Classic Express 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic Lone Star 2019-2022 Ram 1500 Classic SLT 2019-2024 Ram 1500 Classic Tradesman 2019-2024 Ram 1500 Classic Warlock

Bilstein B1 (Components) Active to Passive Suspension Conversion kits allow for non-electronic dampers to be installed on vehicles equipped with factory electronic damping systems. This kit is plug and play with factory harnesses and eliminates the triggering of warning indicators caused by the removal of factory electronic dampers. Bilstein Active to Passive Conversion kit is compatible with all Bilstein performance dampers and coilover kits. All required components and instructions are included in the kit for easy installation.Installation Instructions

Bilstein M 9200 (Coilover) is designed specifically for professional off-road competition use which requires custom lengths and valve settings. M 9200 (Coilover) features a fully adjustable dual rate spring hardware system that will compliment a wide array of industry standard coilover springs. These coilovers are equipped with a 60mm ID remote reservoir and are owner rebuildable and revalvable. M 9200 (Coilover) offers the ability to efficiently adjust spring rates to achieve the optimum performance.Installation InstructionsWarrantyMaterial Safety Data SheetTechnical BulletinWarrantyMaterial Safety Data SheetWarrantyInstallation Instructions

Bilstein M 9200 (Coilover) is designed specifically for professional off-road competition use which requires custom lengths and valve settings. M 9200 (Coilover) features a fully adjustable dual rate spring hardware system that will compliment a wide array of industry standard coilover springs. These coilovers are equipped with a 60mm ID remote reservoir and are owner rebuildable and revalvable. M 9200 (Coilover) offers the ability to efficiently adjust spring rates to achieve the optimum performance.Installation InstructionsWarrantyMaterial Safety Data SheetMaterial Safety Data SheetTechnical BulletinWarrantyInstallation InstructionsWarranty

Bilstein B4 OE Replacement (Air) dampers are designed to replace the original air suspension systems on many European brand vehicles. Bilstein is an OE supplier for air suspension systems; the quality of these products meets, and typically exceeds, the standards set forth by the vehicle's manufacturer. Bilstein B4 OE Replacement (Air) dampers are designed to connect directly into the original connectors on the vehicle, ensuring modification-free installation and restoration of the original feel of the vehicle.

B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot angles increase wheel travel and reduce stress on the joints. These strong black powder-coated 4130 chromoly steel arms are a tubular design which allows for more spring and shock clearance and feature greasable polyurethane bushings and heavy duty ball joints for the ideal combination of ride quality and durability with minimal maintenance needed. They come with detailed instructions and all necessary hardware for easy installation and are compatible with all Bilstein shocks and coilover kits. All components are replaceable.Installation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 2004-2010 Nissan TITAN LE 2017-2024 Nissan TITAN Platinum Reserve 2008-2015,2017-2024 Nissan TITAN PRO-4X 2011-2015,2017-2023 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015,2017-2021 Nissan TITAN SL 2011-2015,2017-2024 Nissan TITAN SV 2004-2010 Nissan TITAN XE

This EGR Cooler is a 100% new unit, not remanufactured. The cooler utilizes larger than OE diameter tubes with a thicker wall to reduce clogging, extend life and resist failure. The unit is TIG welded and pressure tested at the factory. Advanced FLOW engineering (aFe) is a manufacturer of automotive cold air intake systems, performance air filters, fluid filters, intake manifolds turbochargers, programmers, throttle body spacers and exhaust systems.This Part Fits: Year Make Model Submodel 2004 Ford F-250 Super Duty Harley-Davidson Edition 2004 Ford F-250 Super Duty King Ranch 2003-2004 Ford F-250 Super Duty Lariat 2003-2004 Ford F-250 Super Duty XL 2003-2004 Ford F-250 Super Duty XLT 2004 Ford F-350 Super Duty Harley-Davidson Edition 2003-2004 Ford F-350 Super Duty King Ranch 2003-2004 Ford F-350 Super Duty Lariat 2003-2004 Ford F-350 Super Duty XL 2003-2004 Ford F-350 Super Duty XLT

BMR 04-06 GTO Weld-On Boxed Subframe Connectors - Black Hammertone

BMR 04-06 GTO Weld-On Boxed Subframe Connectors - Red

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and road race applications, BMR Tubular K-members drop weight and add loads of structural rigidity. BMRs unique K-member is designed with no engine mounts, allowing you to mount the engine in the car with custom motor plates. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 19-pounds, giving you a 27-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 80 pounds is easily achievable.BMR Suspensions KM009 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and road race applications, BMR Tubular K-members drop weight and add loads of structural rigidity. BMRs unique K-member is designed with no engine mounts, allowing you to mount the engine in the car with custom motor plates. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 19-pounds, giving you a 27-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 80 pounds is easily achievable.BMR Suspensions KM009 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

BMR 05-14 Ford Mustang Front Hollow 38mm Sway Bar Kit w/ Bushings - Hammertone Black

BMR 05-14 Ford Mustang Front Hollow 38mm Sway Bar Kit w/ Bushings - Red

BMR 05-14 S197 Mustang Billet Aluminum Lower Control Arms (Polyurethane) - Black Anodized

A Watts link locates the rearend housing and eliminates lateral axle movement by keeping the differential perfectly centered under the car through the suspension?s entire range of motion. Add the ultimate lateral differential location device to your S197 Mustang with a Body-Mounted Watts Link from BMR Suspension. Manufactured from heavy-duty 1x2-inch, 0.120-inch rectangular steel tubing and 1/4-inch laser-cut steel plate, BMR?s Watts link (WL005) is the ultimate in strength. The axle mounts are built from heavy-duty 3/16-inch laser-cut, CNC-formed steel plate. Double shear link mounts connect the adjustable links to the center pivot. These mounts give you tons of strength and zero deflection. Other companies take the easy route, sacrificing strength with single shear mounts. BMR?s center pivot is fabricated from ?-inch laser-cut plate steel with 1 5/8-inch DOM steel tubing. It uses a double shear mount to the crossmember with a greasable Delrin bushing for smooth, bind-free movement. The links are built from heavy-duty aluminum with left and right hand threaded 5/8-inch rod ends for easy on-car adjustability. The WL005 features zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends and 95-durometer polyurethane bushings. It also features 304 stainless steel, custom designed rod end spacers.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

A Watts link locates the rearend housing and eliminates lateral axle movement by keeping the differential perfectly centered under the car through the suspension?s entire range of motion. Add the ultimate lateral differential location device to your S197 Mustang with a Body-Mounted Watts Link from BMR Suspension. Manufactured from heavy-duty 1x2-inch, 0.120-inch rectangular steel tubing and 1/4-inch laser-cut steel plate, BMR?s Watts link (WL005) is the ultimate in strength. The axle mounts are built from heavy-duty 3/16-inch laser-cut, CNC-formed steel plate. Double shear link mounts connect the adjustable links to the center pivot. These mounts give you tons of strength and zero deflection. Other companies take the easy route, sacrificing strength with single shear mounts. BMR?s center pivot is fabricated from ?-inch laser-cut plate steel with 1 5/8-inch DOM steel tubing. It uses a double shear mount to the crossmember with a greasable Delrin bushing for smooth, bind-free movement. The links are built from heavy-duty aluminum with left and right hand threaded 5/8-inch rod ends for easy on-car adjustability. The WL005 features zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends and 95-durometer polyurethane bushings. It also features 304 stainless steel, custom designed rod end spacers.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMRs unique K-member design feature integrated engine mounts that replace the heavy factory mounts. These engine mounts lower the engine for extra underhood clearance. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable.BMR Suspensions KM020 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!NOTES:- To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member.- BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and/or handling use.- BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMRs unique K-member design feature integrated engine mounts that replace the heavy factory mounts. These engine mounts lower the engine for extra underhood clearance. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable.BMR Suspensions KM020 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!NOTES:- To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member.- BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and/or handling use.- BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMRs unique K-member design feature integrated engine mounts that replace the heavy factory mounts. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable.BMR Suspensions KM018 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!NOTES:- To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member.- BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and/or handling use.- BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMRs unique K-member design feature integrated engine mounts that replace the heavy factory mounts. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable.BMR Suspensions KM018 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!NOTES:- To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member.- BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and/or handling use.- BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR