$500 to $1,000

Thanks to Sinister Diesel, this 03-07 Powerstroke 48v FICM will keep your truck'engine running efficiently. A fuel injection control module or FICM uses electrical impulses to control the fuel injection on your 2003-2007 Ford F-250, F-350, or Excursion with the 6.0L Powerstroke. Preset tunes, including the latest developed by Ford, are included in the Sinister Diesel Powerstroke 48v FICM. That means less guesswork when you first get this FICM, allowing you to replace the factory unit without unnecessary difficulty. Output is excellent at 58 volts and the Sinister Diesel FICM comes with a 2-year warranty which begins when you purchase it. CARB EO # PENDINGCURRENTLY NOT FOR SALE IN THE STATE OF CALIFORNIA FAQ'sQ: Does the 4-pin or 7-pin connector make a difference? , A: No, we use all 4-pin style boards for added durability. These will work with any 6.0 Powerstroke. Q: Is this FICM safe to run with other aftermarket parts such as Injectors, Turbo, Tuning devices?, A: Yes, This FICM is designed to work in sync with all variations of aftermarket performance and reliability modifiications without any issues. Additional Attributes: GTIN: 00841788101585 Extened Information: Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches

The Sinister Diesel Coolant Filter Oil Filter Kit for 6.0L Ford Powerstroke is designed to extend the service life of your fluids by keeping both your oil and coolant free from tiny contaminants that can cause damage to your engine. Oil and Coolant are the life blood of your 6.0L Powerstroke engine and must be kept clean to ensure proper engine operation, lubrication, and even heat transfer. When these fluids are contaminated it can cause premature wear on engine and turbocharger bearings or even engine failure from a lack of lubrication or overheating due to a constriction within the fluid passages inside the block and engine components like your EGR Cooler. Whether your engine has been freshly rebuilt or has racked up hundreds of thousands of miles, contaminants like casting sand leftover from the manufacturing process, metal shavings, rust, mineral deposits floating in the coolant, or oil sludge are all but guaranteed and without treatment can spell disaster. With the Sinister Diesel Coolant Filter Oil Filter Kit for the 2003-2007 6.0L Ford Powerstroke, you can be sure your both of these critical systems are operating at maximum efficiency. This Sinister Diesel Coolant Filter Oil Filter Kit includes all mounts and fittings needed for installation and is machined from 6061 billet aluminum. The filter boss includes 2 threaded inlet ports and 1 outlet port. We recommend replacement of the first filter at 500 miles and replacement of the second and third filters after 3,000 miles each. After three filter changes, replacement can be done once a year. Coolant and Oil Blocks are CNC Machined Billet Aluminum, Removes casting sand and particulate in coolant that's often overlooked, Improved water pump life, Extend the life of your engine components and oil with additional 2-Micron filtration, Abrasion-resistant stainless braided oil lines and reinforced silicone coolant lines, No drilling required; Mounting bracket installs into factory holes, Can be upgraded to Cat Coolant Filter. Additional Attributes: GTIN: 00841788100496 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 9 x 9 x 9 inches

Ford 6.0 Intercooler pipes CARB EO#D-721-5, Ford 6.0 Intake elbow CARB EO# D-721-6 (CARB EO is for 2005-2007 models only), The Sinister Diesel Charge Pipe Kit with the Intake Elbow for the Powerstroke 6.0 includes the intercooler pipe that connects the intercooler to the intake, the pipe that connects the turbocharger compressor to the intercooler, and the intake elbow. This upgraded pipe is larger in diameter and has smooth mandrel bends to increase air flow velocity to improve power and lower EGTs. The Sinister Diesel Charge Pipe Kit is also more durable, being made from 6061 Aluminum alloy and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400psi. Our Intercooler Pipes are masterfully back-purge TIG welded and finished in polished powdercoated Sinister Blue for a beautiful under-hood look. Note: The Hot-side charge pipe does NOT fit with trucks that have the dual alternator option. Features and Benefits:6061 Aluminum Alloy Construction, CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Intake Elbow, (1) Cold Side Charge Pipe, (1) Hot Side Charge Pipe, (4) Silicone Boots, (8) Stainless Steel Spring Clamps. Additional Attributes: GTIN: 00841788100519 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 13 x 13 x 13 inches

The Sinister Diesel Regulated Fuel Return Kit is designed to fit the 2003-2007 model year Ford F-250 and F-350 Super Duty equipped with the 6.0L Powerstroke Diesel Engine. It's constructed with CNC machined billet aluminum parts and stainless steel braided fuel lines and nickel-plated fittings.This Powerstroke Fuel Return Kit comes with an adjustable fuel regulator and fuel pressure gauge to help you adjust and monitor constant fuel pressure to prolong the life of your injectors while getting the power levels you need. The Sinister Diesel Regulated Fuel Return Kit for the 6.0L Powerstroke is a complete package with everything you need and doesn't require any additional parts. Note: Not legal for sale in the state of California, Note: A 3/8in quick disconnect tool is required for installation, Note: To ensure longevity of your Fuel Return Kit, it is HIGHLY suggested to also install a Lift Pump or Fuel Air Separator with additional filtration. Features:Higher Filtration Efficiency, CNC Billet Aluminum Construction, Blue Anodized FinishIncludes:Sinister Diesel Fuel Filter Block, Adjustable Fuel Regulator, Oil Filled Fuel Pressure Gauge, All New High Flow Fuel Lines, Retaining Clips, Protective Cover For Braided Lines. Additional Attributes: GTIN: 00841788101615 Extened Information: Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 5 x 5 x 5 inches

This product is Sinister Diesel's Billet Valve covers for the 2004.5-2010 Duramax will help clean up the engine bay, and add a little more clearance for custom turbo or fuel upgrades. These are fully CNC machined, then they are anodized in the Sinister Blue color for good looks and a long life. These retain the factory Fuel Filter housing as well as the Radiator hose hard line. These DO NOT have any other provisions for wiring harnesses or accessories. These will work on a stock truck with the wiring harness tied back. Upper valve cover includes new gaskets, and will retain factory hardware, or will work with aftermarket hardware like the ARP dress up kit. Additional Attributes: GTIN: 00841788103503 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches

Sinister Manufacturing and Sinister Diesel have created an Exhaust Gas Recirculation (EGR) cooler that looks and fits exactly like your Powerstroke factory stock EGR, but we removed something important: the headaches! Our less-restrictive design reduces clogging by replacing the narrow internal cooling fins with high-flow stainless steel tubing for improved reliability and durability. Manufactured with high-quality TIG welds, each EGR cooler is pressure tested and is guaranteed to protect against leakage. Because this EGR cooler has been designed to fit like your factory model, installation is easy. You don't even have to remove your intake manifold so installation is fast, too. This kit also contains detailed instructions for installation to ease the process. If you are unstatisfied with this purchase, Sinister Diesel provides a against failure, no questions asked. Sinister Diesel has designed this for a 2003 Ford Powerstroke 6.0L engine on a Super Duty F-250/F-350 or Excursion. Features: Construction - Stainless Steel, Product Design - Full TIG welds and pressure tested, Performance Notes - Improved exhaust gas flow, Kit Includes - (1) Sinister Diesel EGR Cooler (Round)CARB EO # PENDING.FOR SINISTER DIESEL EGR COOLERCURRENTLY NOT FOR SALE IN THE STATE OF CALIFORNIA. Additional Attributes: GTIN: 00841788103664 Extened Information: Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 7 x 7 x 7 inches

Sinister Diesel's new Coolant Reservoir is made from 6061 aircraft grade aluminum which is TIG welded and pressure tested for maximum strength. This fabrication method makes Sinister'tank significantly stronger than factory tanks which are molded from two plastic pieces which are sealed together causing stress, cracking and leaking. In addition, aluminum dissipates heat in the coolant system, improving performance and longevity.Sinister'Coolant Reservoir uses a the factory cap (upgraded caps are available!) and features sight glass for easy level inspection. It is a direct, bolt in replacement for your stock reservoir and can be installed with basic tools in less than 30 minutes. This Coolant Reservoir is manufactured at Sinister'Sacramento facility for maximum quality control. Great care is put into the part'cutting, forming, fitment, welding to ensure years of trouble free performance. The Coolant Reservoir is available in Sinister Gray or Sinister Blue for added corrosion resistance and a clean look under the hood. Features and Benefits:TIG Welded 6061 Aluminum Construction - Substantially stronger than OEM, Pressure tested, Powder Coated in Sinister Blue, Drop In Replacement - Installs in less than 30 minutes, Sight glass for easy level inspection;Includes:Sinister Diesel Coolant Reservoir, Installation Hardware. Additional Attributes: GTIN: 00841788103343 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 8 x 8 inches

The Sinister Diesel Charge Pipe Kit for the Powerstroke 6.4L includes the intercooler pipe that connects the intercooler to the intake, and the pipe that connects the turbocharger compressor to the intercooler. This upgraded pipe is larger in diameter and has smooth mandrel bends to increase air flow velocity to improve power and lower EGTs. The Sinister Diesel Charge Pipe Kit is also more durable, being made from 6061 Aluminum alloy and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400psi. Our Intercooler Pipes are masterfully TIG welded and finished in polished powdercoated Sinister Blue for a beautiful under-hood look. Features and Benefits:6061 Aluminum Alloy Construction. CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Cold Side Charge Pipe, (2) Hot Side Charge Pipes, (5) Silicone Boots, (10) Stainless Steel Spring Clamps Additional Attributes: GTIN: 00841788103398 Extened Information: Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 13 x 13 x 13 inches

Sinister Diesel Regulated Fuel Return Kit for 7.3L Powerstroke Diesel, The Sinister Diesel Regulated Fuel Return Kit is designed to fit every Ford F-250 and F-350 Super Duty truck equipped with the 7.3L Powerstroke Diesel Engine. It's constructed with CNC machined billet aluminum parts and stainless steel braided fuel lines and nickel-plated fittings. This Powerstroke Fuel Return Kit comes with an adjustable fuel regulator and fuel pressure gauge to help you adjust and monitor constant fuel pressure to prolong the life of your injectors while getting the power levels you need. This kit completely replaces the factory fuel filter bowl with the 10 Micron filter allow you to upgrade your fuel system with a strong high-flow fuel line and a 6 micron canister style fuel filter that integrates right into your factory fuel lines. The Sinister Diesel Regulated Fuel Return Kit for the 7.3L Powerstroke is a complete package with everything you need and doesn't require any additional parts. Note: Not legal for sale in the state of California Features:Higher Filtration Efficiency, CNC Billet Aluminum Construction, Blue Anodized Finish, Covered by the SinisterNote: A 3/8in quick disconnect tool is required for installation, Note: To ensure longevity of your Fuel Return Kit, it is HIGHLY suggested to also install a Lift Pump or Fuel Air Separator with additional filtration. Kit Includes:6 Micron Fuel Filter, Sinister Diesel Fuel Filter Block, Adjustable Fuel Regulator, Oil Filled Fuel Pressure Gauge, All New High Flow Fuel Lines, Retaining Clips, Protective Cover For Braided Lines. Additional Attributes: GTIN: 00841788101622 Extened Information: Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 7 x 7 x 7 inches

When you rely on your truck and demand the best performance, a plastic water pump impeller just isn't going to cut it. The plastic OEM water pump impellers in the 6.0 Powerstroke have been known to crack along the hub, leading to overheating and potentially very expensive repairs. The Sinister Diesel Billet Water Pump is built with ultimate reliability in mind. It features a CNC machined billet aluminum impeller to resist cracking or flexing under load. The pump housing itself is also CNC machined from billet aluminum for to resist flexing or warping for a reliable seal and to eliminate leaks. It even has a high performance bearing assembly and seal so you know you can rely on it for years to come. To finish it off, we anodize our housings in Sinister Blue for for a beautiful corrosion resistant finish. We stand behind our product with a 2-Year/Unlimited Mile warranty. Includes:Sinister Diesel Billet Water Pump, O-ring. CNC Billet Aluminum 100mm Impeller, CNC Billet Aluminum Pump Housing, Upgraded hub bearing, Anodized in Sinister Blue, Superior strength and reliability compared to OEM unit Additional Attributes: GTIN: 00841788112512 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 8 x 8 inches

When you rely on your truck and demand the best performance, a plastic water pump impeller just isn't going to cut it. The plastic OEM water pump impellers in the 6.0 Powerstroke have been known to crack along the hub, leading to overheating and potentially very expensive repairs. The Sinister Diesel Billet Water Pump is built with ultimate reliability in mind. It features a CNC machined billet aluminum impeller to resist cracking or flexing under load. The pump housing itself is also CNC machined from billet aluminum for to resist flexing or warping for a reliable seal and to eliminate leaks. It even has a high performance bearing assembly and seal so you know you can rely on it for years to come. To finish it off, we anodize our housings in Sinister Blue for for a beautiful corrosion resistant finish. We stand behind our product with a 2-Year/Unlimited Mile warranty. Includes:Sinister Diesel Billet Water Pump, O-ring. CNC Billet Aluminum 90mm Impeller, CNC Billet Aluminum Pump Housing, Upgraded hub bearing, Anodized in Sinister Blue, Superior strength and reliability compared to OEM unit Additional Attributes: GTIN: 00841788112505 Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 8 x 8 inches

When you rely on your truck and demand the best performance, a plastic water pump impeller just isn't going to cut it. The plastic OEM water pump impellers in the 6.4 Powerstroke have been known to crack along the hub, leading to overheating and potentially very expensive repairs. The Sinister Diesel Billet Water Pump is built with ultimate reliability in mind. It features a CNC machined billet aluminum impeller to resist cracking or flexing under load. The pump housing itself is also CNC machined from billet aluminum for to resist flexing or warping for a reliable seal and to eliminate leaks. It even has a high performance bearing assembly and seal so you know you can rely on it for years to come. To finish it off, we anodize our housings in Sinister Blue for for a beautiful corrosion resistant finish. We stand behind our product with a 2-Year/Unlimited Mile warranty. Includes:Sinister Diesel Billet Water Pump, O-ring. CNC Billet Aluminum Impeller, CNC Billet Aluminum Pump Housing, Upgraded hub bearing, Anodized in Sinister Blue, Superior strength and reliability compared to OEM unit Additional Attributes: GTIN: 00841788113199 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 8 x 8 inches

If you're looking for your lifted truck to drive straighter, improve tire wear and exhibit less steering "wander," the Sinister Diesel 1994-2002 Dodge Cummins adjustable track bar kit is what you're looking for. This kit accommodates four-inch lifts (even more if used with a drop bracket), and it helps to eliminate the "Death Wobble" that is sometimes experienced from lifted trucks., The Sinister Diesel 1994-2002 Dodge Cummins adjustable track bar kit is precision manufactured from high-strength forged bars for unparalleled durability, and the Heavy Duty polyurethane bushings ensure long-lasting quality. In addition to improving tire wear, adding this adjustable track bar improves overall steering feel and straightens your truck's tracking on the road. This kit includes all of the hardware necessary for installation, and it is easily adjustable once installed on your truck., Includes:.Sinister Diesel Adjustable Track Bar, All hardware necessary for installation Construction - Forged Steel bar and Heavy Duty Polyurethane Bushings, Product Design - Easily adjustable while installed on vehicle, Performance Notes -.Improved tire wear, straighten tracking, improve steering feel Additional Attributes: GTIN: 00841788110105 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 8 x 8 inches