HPS 7/8" (22mm) Red high temp reinforced silicone heater hose 100 feet roll meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Key Features: Made of premium industrial grade high temp reinforced silicone. Heavy wall design gives it the ability to handle extreme pressure. Ultra flexible & Excellent tensile strength. Technical Specification: Product Type: Silicone . Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Max. Working Pressure: 60 psi. Bend Radius: 4". Wall Thickness: 4mm. Hose Length: 100 feet roll. Color: Red. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil; however, it is compatible with water and anti-freeze such as coolant. Silicone heater hose is shipped in one single continuous roll instead of multiple single foot section. Max Temperature Rating: 350F. Max Working Pressure: 60 psi. Bend Radius: 4" Meet and exceed SAEJ20 industry standards, great for marine and industrial use, custom turbo or radiator cooling system. Silicone hose is NOT compatible with fuel or oil; however, it is compatible with water and anti-freeze such as coolant. High burst strength and excellent heat resistance. Resistant to coolants, cold leaks, cracking, peeling, aging and ozone. Attributes: GTIN: 00648044862422 Brand Name: HPS Performance Inside Diameter: 22 Length: 100 Feet Roll Max PSI: 60 psi Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Proposed Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 24 x 12 inches Weight: 40 lb

HPS 7/8" (22mm) Red high temp reinforced silicone heater hose 50 feet roll meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Key Features: Made of premium industrial grade high temp reinforced silicone. Heavy wall design gives it the ability to handle extreme pressure. Ultra flexible & Excellent tensile strength. Technical Specification: Product Type: Silicone . Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Max. Working Pressure: 60 psi. Bend Radius: 4". Wall Thickness: 4mm. Hose Length: 50 feet roll. Color: Red. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil; however, it is compatible with water and anti-freeze such as coolant. Silicone heater hose is shipped in one single continuous roll instead of multiple single foot section. Max Temperature Rating: 350F. Max Working Pressure: 60 psi. Bend Radius: 4" Meet and exceed SAEJ20 industry standards, great for marine and industrial use, custom turbo or radiator cooling system. Silicone hose is NOT compatible with fuel or oil; however, it is compatible with water and anti-freeze such as coolant. High burst strength and excellent heat resistance. Resistant to coolants, cold leaks, cracking, peeling, aging and ozone. Attributes: GTIN: 00648044862453 Brand Name: HPS Performance Inside Diameter: 22 Length: 50 Feet Roll Max PSI: 60 psi Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Proposed Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 24 x 12 inches Weight: 22 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-672WB) for 2018-2019 Kia Stinger 3.3L V6 Twin Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +21.4 Whp horsepower, +20.6 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +21.4 whp, torque +20.6 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887579 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 13 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-672BL) for 2018-2019 Kia Stinger 3.3L V6 Twin Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +21.4 Whp horsepower, +20.6 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +21.4 whp, torque +20.6 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887586 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 13 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-672P) for 2018-2019 Kia Stinger 3.3L V6 Twin Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +21.4 Whp horsepower, +20.6 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +21.4 whp, torque +20.6 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887562 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 13 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-672R) for 2018-2019 Kia Stinger 3.3L V6 Twin Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +21.4 Whp horsepower, +20.6 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filters for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tubes replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filters are made in the United States. Fine-tuned by HPS Performance to deliver dyno proven gains, increase horsepower +21.4 whp, torque +20.6 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887593 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 13 lb

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2015-2018 Chevrolet Suburban LS 2015-2020 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017-2020 Chevrolet Suburban Premier 2014 Chevrolet Suburban 1500 LS 2014 Chevrolet Suburban 1500 LT 2014 Chevrolet Suburban 1500 LTZ 2014-2020 Chevrolet Tahoe LS 2014-2020 Chevrolet Tahoe LT 2014-2016 Chevrolet Tahoe LTZ 2014-2020 Chevrolet Tahoe PPV 2017-2020 Chevrolet Tahoe Premier 2014-2020 Chevrolet Tahoe SSV 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE 2014-2018 GMC Yukon Denali 2014-2020 GMC Yukon SLE 2014-2020 GMC Yukon SLT 2015-2018 GMC Yukon XL Denali 2015-2020 GMC Yukon XL SLE 2015-2020 GMC Yukon XL SLT 2014 GMC Yukon XL 1500 Denali 2014 GMC Yukon XL 1500 SLE 2014 GMC Yukon XL 1500 SLT

Injector Dynamics 1050-XDS - CBR1000RR 04-07 Applications 11mm (Red) Adapter Top (Set of 4)

Injector Dynamics 1050-XDS - CBR1000RR 2008+ Applications 11mm Machined Top (Set of 4)

Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top GTR Lower Spacer (Set of 6)This Part Fits: Year Make Model Submodel 2008-2013 INFINITI G37 Base 2011-2013 INFINITI G37 IPL 2008-2013 INFINITI G37 Journey 2008-2013 INFINITI G37 Sport 2009-2013 INFINITI G37 X 2010 Nissan 370Z 40th Anniversary Edition 2009-2017 Nissan 370Z Base 2009-2017 Nissan 370Z Nismo 2015-2017 Nissan 370Z Nismo Tech 2015-2017 Nissan 370Z Sport 2015-2017 Nissan 370Z Sport Tech 2009-2017 Nissan 370Z Touring 2015-2017 Nissan 370Z Touring Sport 2009-2010 Nissan GT-R Base 2012-2016 Nissan GT-R Black Edition 2015-2017 Nissan GT-R Nismo 2009-2017 Nissan GT-R Premium 2014-2015 Nissan GT-R Track Edition

Injector Dynamics 1050cc Inj 04-06 Subaru STI Turbo Top-Feed Conversion Kit Two 2x8 Lower O-RingsThis Part Fits: Year Make Model Submodel 2004-2006 Subaru Impreza WRX STI

Injector Dynamics 1050cc Injectors 34mm Length No Adaptor Top 15mm Orange Lower O-Ring (Set of 6)

Injector Dynamics 1050cc Injectors-48mm L/14mm Adaptor Top/2x8mm Lower O-Ring (SFC Rails) (Set of 4)

Injector Dynamics 1050X Injectors 14mm (Grey) Adaptor Top - (Silver) Bottom Adapter (Set of 4)

Injector Dynamics 1050X Injectors 14mm (Grey) Adaptor Top - (Silver) Bottom Adapter (Set of 6)

Injector Dynamics 1065cc min 48mm L14mm (grey) adaptor top, 2x8mm lower Orings (WRC SFC Rail) 4cyl

Injector Dynamics 1300-XDS - 2017 Maverick X3 Applications Direct Replacement No Adapters (Set of 3)

Injector Dynamics 1300-XDS - ZX14 11mm (Red) Adapter Top Denso Lower Cushions (Set of 4)

Injector Dynamics 1300cc Injectors-48mm Length-14mm Grey Top-8mm L O-Ring (For WRX SFC Rail) (4)

Injector Dynamics 1340cc Injector 34mm Length No Adaptor Top 14mm Up O-Ring / 14mm Low O-Ring Qty 4

Injector Dynamics 1340cc Injectors - 48mm Length - 11mm Gold Top - 14mm Lower O-Ring (Set of 3)

Injector Dynamics 1340cc Injectors - 48mm Length - 11mm Gold Top - 14mm Lower O-Ring (Set of 4)

Injector Dynamics 1340cc Injectors - 48mm Length - 11mm Red Top - S2000 Lower Config (Set of 4)This Part Fits: Year Make Model Submodel 2000-2005 Honda S2000 Base

Injector Dynamics 1340cc Injectors - 48mm Length - 14mm Black Bottom - 14mm Lower O-Ring (Set of 4)

Injector Dynamics 1340cc Injectors - 48mm Length - 14mm Grey Top - 14mm Lower O-Ring (Set of 3)

Injector Dynamics 1340cc Injectors - 48mm Length - 14mm Grey Top - 14mm Lower O-Ring (Set of 4)This Part Fits: Year Make Model Submodel 2002-2006 Acura RSX Base 2002-2006 Acura RSX Type-S 2004-2010 Acura TSX Base 2010 Acura TSX V6 2008-2009 Dodge Caliber SRT-4 2003-2005 Dodge Neon SRT-4 2008 Honda Civic MUGEN Si 2002-2011 Honda Civic Si 2006-2009 Honda S2000 Base 2008-2009 Honda S2000 CR 2008,2010-2013 Mitsubishi Lancer Evolution GSR 2002-2006 Nissan Sentra SE-R Spec V

Injector Dynamics 1340cc Injectors - 60mm Length - 11mm Blue Top - 14mm Lower O-Ring (Set of 4)This Part Fits: Year Make Model Submodel 1990-1993,1997-2001 Acura Integra GS 1992-2001 Acura Integra GS-R 1990-2001 Acura Integra LS 1990-1998 Acura Integra RS 1995-1996 Acura Integra Special Edition 1997-1998,2000-2001 Acura Integra Type R 1996 Honda Accord 25th Anniversary Edition 1994-2002 Honda Accord DX 1994-2002 Honda Accord EX 1994-2002 Honda Accord LX 1997,2000,2002 Honda Accord SE 1996-1997,2001-2002 Honda Accord Value Package 1988-1991 Honda Civic Base 1992-2000 Honda Civic CX 1988-2000 Honda Civic DX 1990-2000 Honda Civic EX 1998-2000 Honda Civic GX 1996-2000 Honda Civic HX 1988-2000 Honda Civic LX 1988-1991 Honda Civic RT 4WD 1989-1995,1999-2000 Honda Civic Si 1999 Honda Civic Value Package 1992-1995 Honda Civic VX 1988-1989 Honda Civic Wagovan 1997-2001 Honda Prelude Base 1992-1996 Honda Prelude S 1995 Honda Prelude SE 1992-1996 Honda Prelude Si 1992-1994 Honda Prelude Si 4WS 1997-2001 Honda Prelude Type SH 1993-1996 Honda Prelude VTEC 1991-1996,1999-2002 INFINITI G20 Base 1994-1996,1999-2002 INFINITI G20 T 1991-1993,1995-1998 Nissan 240SX Base 1991-1992,1997-1998 Nissan 240SX LE 1989-1998 Nissan 240SX SE 1989-1990 Nissan 240SX XE 1988-1992 Toyota Celica All Trac 1993 Toyota Celica GTS All Trac 1991-1995 Toyota MR2 Turbo

Injector Dynamics 1340cc Injectors - 60mm Length - 11mm Blue Top - Denso Lower Cushion (Set of 4)This Part Fits: Year Make Model Submodel 1990-1998 Eagle Talon TSi 1990-1994 Mitsubishi Eclipse GS 1990-1999 Mitsubishi Eclipse GST 1990-1999 Mitsubishi Eclipse GSX 1996-1999 Mitsubishi Eclipse Spyder GST 1991-1992 Mitsubishi Galant VR-4 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE 1990-1994 Plymouth Laser RS 2000-2005 Toyota Celica GT 1985-1987 Toyota Corolla Sport GTS 1991-1995 Toyota MR2 Base 2000-2005 Toyota MR2 Spyder Base

Injector Dynamics 1340cc Injectors- 34mm Length-No Adapt Top(14mm O-Ring)/15mm Low O-Ring(Set of 4)

Injector Dynamics 1340cc Injectors-48mm Length - 11mm Gold Top/Denso And -204 Low Cushion (Set of 4)This Part Fits: Year Make Model Submodel 2008 Subaru Forester Sports 2.5 XT 2009 Subaru Forester XT 2007-2010 Subaru Forester XT Limited 2010-2013 Subaru Forester XT Premium 2011-2013 Subaru Forester XT Touring 2002-2014 Subaru Impreza WRX 2006-2007,2010-2014 Subaru Impreza WRX Limited 2009-2014 Subaru Impreza WRX Premium 2007-2014 Subaru Impreza WRX STI 2007,2011-2014 Subaru Impreza WRX STI Limited 2010 Subaru Impreza WRX STI Special Edition 2006-2007 Subaru Impreza WRX TR 2010-2012 Subaru Legacy 2.5GT 2007-2009 Subaru Legacy GT Limited 2007-2009 Subaru Legacy GT spec.B

Injector Dynamics 1340cc Injectors-48mm Length-14mm Grey Top-14mm L O-Ring(R35 Low Spacer)(Set of 4)This Part Fits: Year Make Model Submodel 2010-2014 Hyundai Genesis Coupe 2.0T 2010-2014 Hyundai Genesis Coupe 2.0T Premium 2010-2014 Hyundai Genesis Coupe 2.0T R-Spec 2010 Hyundai Genesis Coupe 2.0T Track

Injector Dynamics 1750-XDS - 08 Outlander ATV Injectors

Injector Dynamics 1750-XDS - 2017 Maverick X3 Applications Direct Replacement No Adapters (Set of 3)

Injector Dynamics 1750-XDS - 34mm Length - 14mm Top - 14mm Lower O-Ring (Set of 2)

Injector Dynamics 1750-XDS - 60mm Length - 14mm Purple Top - 14mm Lower O-Ring (Set of 2)

Injector Dynamics 1750-XDS - YXZ1000 (Includes R) UTV Applications 11mm Machined Top (Set of 3)