HPS Red performance Shortram Air intake with heat shield [part number 827-680R] for 2013-2016 Nissan Pathfinder 3.5L V6 offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +11 Whp horsepower, +13 Ft/lbs torque while maintaining safe air fuel ratio. The aluminum heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2016 Nissan Pathfinder 3.5L V6. Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +11 Whp horsepower, +13 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Includes heat shield, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887517 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

HPS Black performance Shortram Air intake with heat shield [part number 827-549WB] for 2016-2018 Kia Optima 2.4L Non Turbo offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque while maintaining safe air fuel ratio. The aluminum heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2016-2018 Kia Optima 2.4L Non Turbo. Bolt-on easy installation, no modification. Does not require tuning. Dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Includes heat shield, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044886428 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

HPS Blue performance Shortram Air intake with heat shield [part number 827-549BL] for 2016-2018 Kia Optima 2.4L Non Turbo offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque while maintaining safe air fuel ratio. The aluminum heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2016-2018 Kia Optima 2.4L Non Turbo. Bolt-on easy installation, no modification. Does not require tuning. Dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Includes heat shield, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044886459 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

HPS polish performance Shortram Air intake with heat shield [part number 827-549P] for 2016-2018 Kia Optima 2.4L Non Turbo offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque while maintaining safe air fuel ratio. The aluminum heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2016-2018 Kia Optima 2.4L Non Turbo. Bolt-on easy installation, no modification. Does not require tuning. Dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Includes heat shield, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044886442 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

HPS Red performance Shortram Air intake with heat shield [part number 827-549R] for 2016-2018 Kia Optima 2.4L Non Turbo offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque while maintaining safe air fuel ratio. The aluminum heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2016-2018 Kia Optima 2.4L Non Turbo. Bolt-on easy installation, no modification. Does not require tuning. Dyno proven performance gains +8.2 Whp horsepower, +11.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Includes heat shield, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044886435 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Gunmetal shortram air intake with heat shield for 2016-2017 Kia Optima LX 1.6L Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +14 Whp horsepower, +20.5 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2016-2017 Kia Optima LX 1.6L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +14 Whp horsepower, +20.5 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886176 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-515WB) for 2005-2006 Scion tC 2.4L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890494 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-515BL) for 2005-2006 Scion tC 2.4L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890463 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-515P) for 2005-2006 Scion tC 2.4L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890470 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-515R) for 2005-2006 Scion tC 2.4L offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +7.9 whp , torque +9.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890487 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-169WB) for 2005-2019 Toyota Tacoma 2.7L offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888095 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-169BL) for 2005-2019 Toyota Tacoma 2.7L offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888064 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-169P) for 2005-2019 Toyota Tacoma 2.7L offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888071 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-169R) for 2005-2019 Toyota Tacoma 2.7L offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +5.7 whp , torque +7.4 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888088 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-667WB) for 2009-2014 GMC Yukon 4.8L 5.3L 6.2L V8 offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890722 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-667BL) for 2009-2014 GMC Yukon 4.8L 5.3L 6.2L V8 offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890692 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-667P) for 2009-2014 GMC Yukon 4.8L 5.3L 6.2L V8 offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890708 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-667R) for 2009-2014 GMC Yukon 4.8L 5.3L 6.2L V8 offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +16.3 whp , torque +17.1 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890715 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-587WB) for 2011-2015 Kia Optima 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887852 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-587BL) for 2011-2015 Kia Optima 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887821 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-587P) for 2011-2015 Kia Optima 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887838 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-587R) for 2011-2015 Kia Optima 2.0L Turbo offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887845 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-676WB) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890579 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-676BL) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890548 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-676P) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890555 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-676R) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890562 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-682WB) for 2013-2019 Lexus GS350 3.5L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890531 Brand Name: HPS Performance Add-On HPS Filter: HPS-4302 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-682BL) for 2013-2019 Lexus GS350 3.5L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890500 Brand Name: HPS Performance Add-On HPS Filter: HPS-4302 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-682P) for 2013-2019 Lexus GS350 3.5L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890517 Brand Name: HPS Performance Add-On HPS Filter: HPS-4302 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-682R) for 2013-2019 Lexus GS350 3.5L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +10.4 whp , torque +12.2 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890524 Brand Name: HPS Performance Add-On HPS Filter: HPS-4302 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

Built for performance and show, the HPS Black shortram air intake with heat shield for 1991-2001 Jeep Cherokee 4.0L I6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 1991-2001 Jeep Cherokee 4.0L I6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887005 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Blue shortram air intake with heat shield for 1991-2001 Jeep Cherokee 4.0L I6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 1991-2001 Jeep Cherokee 4.0L I6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887036 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 1991-2001 Jeep Cherokee 4.0L I6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 1991-2001 Jeep Cherokee 4.0L I6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887029 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Red shortram air intake with heat shield for 1991-2001 Jeep Cherokee 4.0L I6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 1991-2001 Jeep Cherokee 4.0L I6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887012 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Black shortram air intake with heat shield for 1991-1999 Mitsubishi 3000GT DOHC V6 3.0L Non Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 1991-1999 Mitsubishi 3000GT DOHC V6 3.0L Non Turbo . Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887289 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Blue shortram air intake with heat shield for 1991-1999 Mitsubishi 3000GT DOHC V6 3.0L Non Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 1991-1999 Mitsubishi 3000GT DOHC V6 3.0L Non Turbo . Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044887319 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb